The document discusses various techniques for digital-to-digital conversion, including line coding, block coding, and scrambling. It explains line coding in more detail, covering topics such as signal element versus data element, line coding schemes like NRZ-L, NRZ-I, Manchester encoding, and multilevel coding schemes like 2B1Q. Worked examples are provided to illustrate concepts like calculating signal rate from data rate for different coding schemes.
The document discusses various topics related to digital transmission including:
1) Line coding techniques such as unipolar, polar, NRZ-L, NRZ-I, Manchester, and differential Manchester encoding.
2) Block coding methods like 4B5B encoding which maps 4-bit groups to 5-bit groups using a lookup table.
3) Digital modulation schemes including PAM, PCM, and how PCM converts analog signals to digital codes using sampling and quantization.
4) Factors that affect sampling rate such as the Nyquist theorem and bandwidth of the signal.
5) Serial and parallel data transmission and the differences between asynchronous and synchronous transmission modes.
This document discusses digital communication systems and line coding. It covers topics such as multiplexing techniques, line coders for baseband transmission, regenerative repeaters, examples of line coding schemes including NRZ, RZ, Manchester, AMI, and mBnL codes. It also discusses related topics like data rate vs signal rate, self-synchronization, bandwidth requirements, and clock recovery.
The document discusses various techniques for digital-to-digital conversion, including line coding, block coding, and scrambling. It explains line coding in more detail, covering topics such as signal element versus data element, line coding schemes like NRZ-L, NRZ-I, Manchester encoding, and multilevel coding schemes like 2B1Q. Worked examples are provided to illustrate concepts like calculating signal rate from data rate for different coding schemes.
The document discusses various topics related to digital transmission including:
1) Line coding techniques such as unipolar, polar, NRZ-L, NRZ-I, Manchester, and differential Manchester encoding.
2) Block coding methods like 4B5B encoding which maps 4-bit groups to 5-bit groups using a lookup table.
3) Digital modulation schemes including PAM, PCM, and how PCM converts analog signals to digital codes using sampling and quantization.
4) Factors that affect sampling rate such as the Nyquist theorem and bandwidth of the signal.
5) Serial and parallel data transmission and the differences between asynchronous and synchronous transmission modes.
This document discusses digital communication systems and line coding. It covers topics such as multiplexing techniques, line coders for baseband transmission, regenerative repeaters, examples of line coding schemes including NRZ, RZ, Manchester, AMI, and mBnL codes. It also discusses related topics like data rate vs signal rate, self-synchronization, bandwidth requirements, and clock recovery.
The document discusses various topics related to digital transmission including:
1. Digital-to-digital conversion techniques like line coding, block coding, and scrambling that are used to represent digital data with digital signals. Line coding is always needed while block coding and scrambling may or may not be needed.
2. Analog-to-digital conversion techniques like pulse code modulation (PCM) and delta modulation that are used to convert analog signals to digital data. PCM involves sampling, quantization, and encoding of analog signals.
3. Transmission modes including parallel transmission of multiple bits together and serial transmission of one bit at a time. Serial transmission can be asynchronous, synchronous, or isochronous depending
11. ได้แก่การที่ Fast Ethernet มีการแบ่งชนิดของ Repeater ออกเป็น Class ได้แก่
Class I และ Class II
ความแตกต่างระหว่าง Class I และ Class II Repeater
Class I Repeater
Class I Repeater สามารถนำามาใช้เพื่อเชื่อม ต่อกับสถานีทำางาน ต่างๆบนเส้น
สัญญาณหลากชนิด เป็น Repeater ที่มี Delay ค่อนข้างมาก เนื่องจากจะต้องทำา
หน้าที่ ถอดรหัสสัญญาณที่เข้ามายัง พอรต์อินพุท จากนั้น ก็จะเข้ารหัสซำ้าอีกครั้ง
จากนั้นก็จะส่งออกไปที่พอรต์เอาท์พุท การทำาเช่นนี้ จะทำาให้ Repeater Class I มี
ค่า Delay ค่อนข้างมาก ซึ่งโดยทั่วไปจะมีค่า Delay อยู่ที่ 168 Bit Time และการที่มี
Delay มากขนาดนี้ ก็จะทำาให้ Class I Repeater ไม่สามารถเชื่อมต่อกับ Class I
Hub Repeater อื่นๆได้อีก ดังนั้น การเชื่อมต่อเครือข่ายจะเป็นรูปแบบ Hub
Standalone พ่วงต่อกับ Hub Repeater อื่นๆได้อีก
-٧-
อย่างไรก็ดี การที่ Class I Repeater ทำาหน้าที่แปลงสัญญาณที่แตกต่างกัน
เช่นนี้ จึงทำาให้ Class I Repeater Hub สามารถเชื่อมต่อ สถานีทำางานอื่นๆที่ใช้ LAN
Card ที่แตกต่างกัน เช่น 100BASE-TX กับ 100BASE-T4 เป็นต้น
Repeater Hub ที่เป็นแบบ Stackable มักจะเป็นแบบ Class I ทั้งสิ้น
Class I Repeater อาจมีทุกพอรต์เป็นแบบ 100BASE-T4 หรือทุกๆพอรต์เป็น
100BASE-TX ก็เป็นได้ หรือ Repeater บางตัวอาจมี พอรต์ทั้ง 2 ประเภทอยู่ใน Hub
เดียวกันก็ได้ บางครั้งเขาเรียก Hub Repeater แบบนี้ว่า Translational Repeater
รูปที่ ٣ โครงสร้างภายในของ Class I Repeater
Class II Repeater
Class II Repeater ไม่มีการถอดสัญญาณที่วิ่งเข้ามาที่ Hub แต่กลับขยาย
สัญญาณที่วิ่งเข้ามาที่ Hub แทน จากนั้นก็ทำาการส่งออกไปที่พอรต์เอาท์พุท โดย
ไม่มีการถอดรหัสหรือแปลงสัญญาณใดๆ ทังสิ้น ลักษณะเช่นนี้ จะทำาให้ Class II
้
Hub Repeater มีค่าหน่วงเวลาหรือ Delay น้อยลง และเมื่อมีค่า Delay น้อยลงก็จะ
ทำาให้ สามารถพ่วงต่อ Class II Hub ด้วยกันถึง 2 ตัว แต่มีข้อเสียคือ สถานีทำางาน
ทุกเครื่องที่นำามาเชื่อมต่อกับ Repeater Hub นี้จะต้องเป็นระบบเดียวกัน เช่น
100Base-TX กับ 100BASE-TX ด้วยกัน หรือ 100BASE-T4 กับ 100BASE-T4 อย่าง
ใดอย่างหนึ่ง
12. ค่าหน่วงเวลา (Delay) ของ Class II Hub Repeater อยู่ที่ 92 Bit Time ซึงเป็นค่า
่
Delay ที่เกิดขึ้นจากสัญญาณที่เข้ามาทางพอรต์อินพุท แล้วออกไปทางเอาท์พุท
รูปที่ ٤ แสดงโครงสร้างการทำางานภายใน Class II Repeater Hub
-٨-
ในการเชื่อมต่อนั้นเราสามารถทำาได้หลายวิธีและแต่ละวิธีมีกติกาการเชื่อมต่อที่
แตกต่างกัน ดังต่อไปนี้
١.กฎกติกาการเชื่อมต่อของ 100BASE-T (TX /T4 และ T2)
٢.กฎกติกาการเชื่อมต่อ 100BASE-FX
٣.กฎกติกาการเชื่อมต่อสำาหรับ 100BASE-T4
٤.การเชื่อมต่อแบบผสม
โดยในที่นี้จะขอยกตัวอย่างการเชื่อมต่อแบบเดียว คือ การเชื่อมต่อแบบผสม
ดังนี้
1.
16. ข.4 บิต ใน 5 บิต จะไม่ถูกนำามาใช้เป็นข้อมูล ส่วนบิตที่ 5 สำาหรับงานควบคุม
ในระดับ Physical Layer Control
ค.4 บิต ใน 5 บิต จะถูกนำามาใช้เป็นข้อมูล ส่วนบิตที่ 5 สำาหรับ งานควบคุมใน
ระดับ Physical Layer Control
ง.ถูกทุกข้อ
6. ความยาวสูงสุดของ Segment สำาหรับ 100BASE-T4 คือ
ก.1 m ข.10 m ค.100 m ง.1000 m
7. ความยาวสายสูงสุดของ SEGMENT คือ
ก.10BASE-T2 = 10 m ข.100BASE-T2 = 100 m
ค.1000BASE-T2 = 1000 m ง.10BASE-T2 = 100 m
8. ความแตกต่างระหว่าง Ethernet ธรรมดากับ Fast Ethernet คือ
ก.ขนาดของเครือข่ายที่ใหญ่ที่สุด จากเดิม 2500 เมตรบน Ethernet ธรรมดา
เป็น 205 เมตร บน Fast Ethernet และ Fast Ethernet มีการแบ่งชนิดของ Repeater
ออกเป็น Class ได้แก่ Class I และ Class II
ข.ขนาดของเครือข่ายที่ใหญ่ที่สุด จากเดิม 250 เมตรบน Ethernet ธรรมดา
เป็น 205 เมตร บน Fast Ethernet และ Fast Ethernet มีการแบ่งชนิดของ Repeater
ออกเป็น Class ได้แก่ Class I และ Class II
ค.ขนาดของเครือข่ายที่ใหญ่ที่สุด จากเดิม 25 เมตรบน Ethernet ธรรมดา เป็น
20 เมตร บน Fast Ethernet และ Fast Ethernet มีการแบ่งชนิดของ Repeater ออก
เป็น Class ได้แก่ Class I และ Class II
ง.ไม่มีข้อถูก
9. Class I Repeater แตกต่างจาก Class II Repeater อย่างไร
ก. Class I Repeater ไม่มีการถอดรหัสสัญญาณที่เข้ามายัง พอรต์อินพุท แต่
Class II Repeater มีการถอดสัญญาณที่วิ่งเข้ามาที่ Hub แต่กลับขยายสัญญาณที่วิ่ง
เข้ามาที่ Hub แทน
ข. Class I Repeater มีการถอดรหัสสัญญาณที่เข้ามายัง Hub แต่ Class II R
epeater ไม่มีการถอดสัญญาณที่วิ่งเข้ามาที่ Hub แต่กลับขยายสัญญาณที่วิ่งเข้ามาที่
Hub แทน
ค. Class I Repeater มีการถอดรหัสสัญญาณที่เข้ามายัง พอรต์อินพุท แต่
Class II Repeater ไม่มีการถอดสัญญาณที่วิ่งเข้ามาที่ Hub แต่กลับขยายสัญญาณที่วิ่ง
เข้ามาที่ Hub แทน
ง. ไม่แตกต่างกัน
10. การเชื่อมต่อมีกี่วิธี อะไรบ้าง
ก.٥ ได้แก่ กฎกติกาการเชื่อมต่อของ 100BASE-T (TX /T4 และ T2) , กฎ
กติกาการเชื่อมต่อ 100BASE-FX , กฎกติกาการเชื่อมต่อสำาหรับ 100BASE-T4 , การ
เชื่อมต่อแบบผสมและการเชื่อมต่อแบบอนุกรม
ข.٣ ได้แก่ กฎกติกาการเชื่อมต่อ 100BASE-FX , กฎกติกาการเชื่อมต่อสำาหรับ
100BASE-T4 และการเชื่อมต่อแบบผสม