Fairview footbridge 260312_
•Download as PPT, PDF•
0 likes•493 views
The Fairview Footbridge Refurbishment project involves replacing a section of the bridge that crosses over a carriageway, raising the north end slightly to increase clearance for vehicles, and refurbishing the existing ramps and stairways through shot blasting, repairing, painting, and providing new surfacing. Crash protection will also be added to the bridge. The work will be done in stages with temporary stairways and overnight road closures to complete the section replacement and ramp adjustments.
Report
Share
Report
Share
Recommended
Glacier Skywalk
The Glacier Skywalk is a cantilevered glass walkway located 280 meters above the Sunwapta Valley in Jasper National Park, Alberta, Canada. The 30 meter walkway juts 35 meters over the cliff edge, supported by trapezoidal steel box girders anchored to the cliff face. The structure required complex post-tensioning and anchoring both during and after construction to counteract forces trying to overturn the cantilever and provide stability. It offers visitors spectacular views of the unique Columbia Icefield ecosystem.
San-Francisco-Oakland Bay Bridge New East Span: Skyway
The Skyway project summary describes the construction of the longest section of the new East Span of the San Francisco-Oakland Bay Bridge. It involved replacing the original span damaged in the 1989 earthquake. The Skyway utilized innovative seismic design like hinge joints and piles driven 300 feet deep using offshore oil industry technology. The precast concrete segments weighed up to 750 tons each and were the largest ever cast. The completed Skyway provides a seismically resilient connection between Oakland and the new single-tower suspension bridge that opened in 2013.
Islamic architecture (1)
The Quwwat-ul-Islam Mosque in Delhi was originally constructed under Qutub ud din Aibak, but was then enlarged by two later rulers. Shamsuddin Iltutmish extended the colonnades and prayer hall outside the original enclosure, which resulted in the Qutub Minar being located within the new mosque area. Later, Alauddin Khilji further extended the mosque substantially by enlarging the boundaries and adding new gateways, nearly doubling the area of the mosque. He also began constructing another large minar that remained unfinished.
Emergency Vehicle Operator Course (EVOC)
Post-Tensioning Case Study - Slab-on-Ground
2013 Award of Excellence: Emergency Vehicle Operator Course (EVOC)
Location: Camp Ripley at Little Falls, MN
Submitted by: AMSYSCO, Inc.
Owner: U.S. Army
Architect(s): URS
Engineer(s): URS
Contractor: Donlar Construction
PT Supplier: AMSYSCO, Inc.
Other Contributors: Pawan Gupta; High Strength Cement- Ed Rice, CTS Cement
I-64 Kanawha River Bridge
The I-64 Kanawha River Bridge is a 2,975 foot long, post-tensioned concrete box girder bridge in Kanawha County, West Virginia that carries I-64 eastbound traffic. It has a record-setting main span of 760 feet. The bridge was completed ahead of schedule and opened in 2010. The post-tensioned concrete design was chosen over steel alternatives due to being over $30 million cheaper in bids.
Lecture04 AASHTO girder bridge ( Highway Engineering )
This document discusses the design and repair of pre-stressed concrete girders and structures. It describes jacking up precast concrete girders to replace bearing pads, repairing an overpass by adding a vertical post-tensioning cable, and repairing a cracked pier through horizontal post-tensioning to close vertical cracks.
1065. genesis of footbridge design, from a community perspective radnor bri...
- The proposed Radnor Bridge would connect two communities across the River Thames in Richmond borough, improving accessibility between the areas and enhancing the local landscape. It would provide pedestrian and cycle paths to improve transportation options while protecting biodiversity. With its strategic positioning and elegant, sustainable design that blends into the natural environment, the bridge could help stimulate social and economic development in the area through improved access between communities and amenities. Local advocates hope to make the project a reality through community support, funding, and environmental reviews.
Ewb oc endana footbridge project 2010
The document summarizes the construction of a footbridge over the Ewaso Ng'iro River in Kenya by Engineers Without Borders, Orange County from July to October 2010. The bridge was built in three trips by three teams to provide access for the Endana community to the only health clinic and schools in the region. It describes the multi-phase construction process and thanks sponsors and volunteers for their support of the project.
Recommended
Glacier Skywalk
The Glacier Skywalk is a cantilevered glass walkway located 280 meters above the Sunwapta Valley in Jasper National Park, Alberta, Canada. The 30 meter walkway juts 35 meters over the cliff edge, supported by trapezoidal steel box girders anchored to the cliff face. The structure required complex post-tensioning and anchoring both during and after construction to counteract forces trying to overturn the cantilever and provide stability. It offers visitors spectacular views of the unique Columbia Icefield ecosystem.
San-Francisco-Oakland Bay Bridge New East Span: Skyway
The Skyway project summary describes the construction of the longest section of the new East Span of the San Francisco-Oakland Bay Bridge. It involved replacing the original span damaged in the 1989 earthquake. The Skyway utilized innovative seismic design like hinge joints and piles driven 300 feet deep using offshore oil industry technology. The precast concrete segments weighed up to 750 tons each and were the largest ever cast. The completed Skyway provides a seismically resilient connection between Oakland and the new single-tower suspension bridge that opened in 2013.
Islamic architecture (1)
The Quwwat-ul-Islam Mosque in Delhi was originally constructed under Qutub ud din Aibak, but was then enlarged by two later rulers. Shamsuddin Iltutmish extended the colonnades and prayer hall outside the original enclosure, which resulted in the Qutub Minar being located within the new mosque area. Later, Alauddin Khilji further extended the mosque substantially by enlarging the boundaries and adding new gateways, nearly doubling the area of the mosque. He also began constructing another large minar that remained unfinished.
Emergency Vehicle Operator Course (EVOC)
Post-Tensioning Case Study - Slab-on-Ground
2013 Award of Excellence: Emergency Vehicle Operator Course (EVOC)
Location: Camp Ripley at Little Falls, MN
Submitted by: AMSYSCO, Inc.
Owner: U.S. Army
Architect(s): URS
Engineer(s): URS
Contractor: Donlar Construction
PT Supplier: AMSYSCO, Inc.
Other Contributors: Pawan Gupta; High Strength Cement- Ed Rice, CTS Cement
I-64 Kanawha River Bridge
The I-64 Kanawha River Bridge is a 2,975 foot long, post-tensioned concrete box girder bridge in Kanawha County, West Virginia that carries I-64 eastbound traffic. It has a record-setting main span of 760 feet. The bridge was completed ahead of schedule and opened in 2010. The post-tensioned concrete design was chosen over steel alternatives due to being over $30 million cheaper in bids.
Lecture04 AASHTO girder bridge ( Highway Engineering )
This document discusses the design and repair of pre-stressed concrete girders and structures. It describes jacking up precast concrete girders to replace bearing pads, repairing an overpass by adding a vertical post-tensioning cable, and repairing a cracked pier through horizontal post-tensioning to close vertical cracks.
1065. genesis of footbridge design, from a community perspective radnor bri...
- The proposed Radnor Bridge would connect two communities across the River Thames in Richmond borough, improving accessibility between the areas and enhancing the local landscape. It would provide pedestrian and cycle paths to improve transportation options while protecting biodiversity. With its strategic positioning and elegant, sustainable design that blends into the natural environment, the bridge could help stimulate social and economic development in the area through improved access between communities and amenities. Local advocates hope to make the project a reality through community support, funding, and environmental reviews.
Ewb oc endana footbridge project 2010
The document summarizes the construction of a footbridge over the Ewaso Ng'iro River in Kenya by Engineers Without Borders, Orange County from July to October 2010. The bridge was built in three trips by three teams to provide access for the Endana community to the only health clinic and schools in the region. It describes the multi-phase construction process and thanks sponsors and volunteers for their support of the project.
Butterfly bridge sannam kalra
The Butterfly Bridge is a footbridge over a section of the river used for rowing in Bedford, UK. It was opened in 1998 after an architectural competition and cost notably more than expected. The bridge has twin steel arches that are inclined like butterfly wings to provide an open but contained feeling on the deck. The bridge was intended to replace a temporary pontoon bridge used during festivals but is actually used in addition to the temporary bridge.
Siddhi volantin footbridge
The Volantin Footbridge was designed by Santiago Calatrava across the Nervion River in Bilbao, Spain. It is a tied-arch pedestrian bridge that provides a convenient route for pedestrians between hotels and the Bilbao Guggenheim Museum. The main structural component is a 15m tall steel arch with a 75m span, consisting of an inclined steel arch linking two platforms with access ramps and stairways on both riverbanks.
Helvetas Nepal Trail bridge experience
1. Nepal is a landlocked country located between India and China with diverse terrain ranging from near sea level to the highest point on Earth. Road construction is very challenging due to the steep slopes and unstable geology.
2. Pedestrian bridges are crucial infrastructure for rural communities in Nepal, as 70% of the population lacks road access. Suspension bridges built using local materials and skills have helped ensure access to basic services for millions.
3. Over several decades, Nepal has developed expertise in pedestrian bridge technology tailored to the local context. Standard designs and training programs have been established to support both community-led and contractor-built bridge projects.
FINAL KGB SUBMISSION
The document outlines the construction process for a replica of the Kingsgate Footbridge in Bircham Newton, including setting out the site, installing pile caps and piles, forming and pouring concrete for the caps and decks, installing steel piers and rotating the pre-cast concrete sections into position to form the completed bridge structure over 4.5 days. It provides details on the construction sequence, organization of workers, health and safety plans, calculations, and other documentation required for the project.
Pultrusion and frp bridge case study
The document discusses pultrusion, a manufacturing process used to produce composite bridge components. Pultrusion involves pulling reinforced fibers through a resin bath and heated die to form constant cross-section parts. It results in high strength, consistent quality products. As an example, the Fiberline pedestrian bridge in Denmark was constructed entirely of pultruded fiber reinforced polymer profiles and has a 100-year expected lifespan requiring only minor maintenance. Pultrusion is presented as a cost-effective method for producing durable bridge components from composites.
Engineering Drawing: Chapter 07 dimensioning
The document discusses dimensioning techniques including:
1) Dimensioning components like extension lines, dimension lines, and dimension numbers and their proper usage.
2) Dimensioning common features like lengths, angles, arcs, holes, and their associated dimensioning methods.
3) Recommended practices for placement of dimensions and problem solving steps for dimensioning objects.
Pré dimensionamento estrutural
O documento fornece informações iniciais sobre o pré-dimensionamento de elementos estruturais de concreto armado, como pilares, vigas, lajes e outros. Ele destaca a importância de se integrar a estrutura ao projeto arquitetônico de forma coerente e econômica. As dimensões sugeridas levam em conta critérios como cargas, vãos e materiais.
Samll bridge design
This document provides guidance on constructing footbridges at the community and district level. It discusses footbridge specifications, types of footbridges, and design considerations. The main types covered are bamboo, timber log, sawn timber, steel, reinforced concrete, and suspension bridges. Selection criteria include span, cost, materials, and maintenance requirements. Timber designs are then covered in more detail, with examples of basic, improved, and longer span bamboo footbridges. Regular maintenance is emphasized for all bridge types.
Sk 069 - ga working drawings
This document appears to be a preliminary site plan or map showing proposed infrastructure for a cycle route scheme between Talbot Street and Clontarf Road in Dublin. It includes a legend explaining symbols for different elements such as proposed and existing roads, paths, cycle tracks, parking areas, trees and more. The map is divided into multiple sections at different scales ranging from 1:12 to 1:250. Key locations labeled on the maps include Connolly Memorial, Arkle House, hotels, banks, bus stops and more.
17203 consultative forum no 3 30112018 issue compressed
This document contains the progress update from the third consultative committee meeting for the Clontarf to City Centre Cycle Route project. It was presented by Thomas Leonard from Roughan & O'Donovan Consulting Engineers. The update included information on the plan alignment for multiple sections of the proposed cycle route from Amiens Street to Clontarf Road and details on the 3D model and utility design for the 5 Lamps Junction area.
Griffith Avenue SHD ncac presentation 21 01-2019
Presentation of the Griffith Avenue Strategic Housing Development proposal to the North Central Area Committee on 21/01/2019
Report no. 082019 of the environment strategic policy committee changes to ...
This document provides a summary of a report from Dublin City Council regarding proposed new waste bye laws. The key points are:
1) Dublin City Council has drafted new waste bye laws to replace the existing 2013 bye laws due to changes in legislation governing waste and regional waste management plans.
2) The proposed bye laws include provisions around waste collection services, segregation of household waste, and designated collection days, as well as additional rules for multi-unit properties and the central commercial district.
3) Public consultation was held on the draft bye laws and seven submissions were received. The report analyses the issues raised and recommends some amendments to the bye laws.
4) The Environment Strategic Policy Committee reviewed the bye
DCC CEO Report to ABP
Report from CEO of Dublin City Council to An Bord Pleanala RE: Strategic Housing Development ABP 300559-18 - lands to the east of St Pauls College
2017.09.07 dcc120033 cyclist safety slides
Several safety concerns were raised regarding existing cycling facilities, including dangerous conflicts between pedestrians and cyclists, a request for signage to clarify pedestrian and cycling areas, and substandard access points. The proposed schemes aim to significantly improve safety by minimizing conflicts through providing segregated facilities for pedestrians and cyclists, segregating cyclists from traffic and parking areas, and clarifying areas in parks.
2017.08.28 db ncac&cac clontarf to city centre cycle route part 8 expla...
1. Amendments have been made to the Clontarf to City Centre Cycle Route Part 8 proposal to minimize the removal of mature trees in Fairview Park.
2. One inbound traffic lane will be removed for 350m through Fairview Park to provide space for a segregated inbound cycle track between the rows of trees. This will allow the retention of 42 of the 46 trees.
3. The amendments will result in some increased inbound queuing during morning rush hours but will significantly reduce tree removal. The rest of the scheme and number of outbound lanes remains unchanged.
Abp150416
The document is a letter supporting various appeals against a planning permission granted by Dublin City Council regarding a development at 1, 1A and 1B Sybil Hill Road in Raheny, Dublin 5. The letter raises concerns that [1] the 3 to 5-storey scale of the front of the development will negatively impact the vista of Sybil Hill House and along Sybil Hill Road, [2] there is already traffic congestion in the area that a traffic study should address before worsening the situation, and [3] the assertion that the site is within 500 meters of public transport is refuted as any commuter would have to travel over 500 meters to reach the transport hub.
DCC Dollymount Flood Defence Report
1. The document summarizes key terms related to the Dollymount Flood Defence Level project, including the current estimated 100-year flood level, future sea level rise estimates, associated wave heights, and recommended freeboard allowances.
2. It is proposing to reduce the flood protection level by 100mm to provide for a 1 in 100 year flood event rather than a 1 in 200 year level, subject to assessing increased risk to local businesses and homes. An additional 200mm reduction is proposed for future sea level rise estimates, meaning the flood defence will need rebuilding within 25 years.
3. The 300mm total reduction would lower the highest point of the flood wall to 800mm along a 450m stretch, allowing clear
Dollymount Flood Defence schematic
This document outlines flood defence levels for Dollymount including the minimum safety allowance of 300mm or 12 inches, the lowest road level of 1.60m or 5'3" for a 1% annual exceedance probability (100 year) event, and recommendations for additional freeboard allowances up to 3.65m to account for factors like associated wave height, global warming, and future sea level rise over the next 25 years.
Dollymount flood wall review feb 2016 rev2
This document provides a summary of an external review of the Dollymount Flood Wall design in Dublin. It was prepared by Dr. Jimmy Murphy of the MaREI Centre at University College Cork in February 2016. The review assesses the appropriateness of the wall's current crest level of 4.25m and examines alternative design solutions. It analyzes the extreme water levels, sea level rise projections, wave conditions, and minimum freeboard used in the original design. The review finds that the most relevant extreme water level to use is 3.25m, higher than indicated in some original documents. It concludes by recommending the wall height be sufficient to protect against flooding risks and provide views of the environment.
More Related Content
Viewers also liked
Butterfly bridge sannam kalra
The Butterfly Bridge is a footbridge over a section of the river used for rowing in Bedford, UK. It was opened in 1998 after an architectural competition and cost notably more than expected. The bridge has twin steel arches that are inclined like butterfly wings to provide an open but contained feeling on the deck. The bridge was intended to replace a temporary pontoon bridge used during festivals but is actually used in addition to the temporary bridge.
Siddhi volantin footbridge
The Volantin Footbridge was designed by Santiago Calatrava across the Nervion River in Bilbao, Spain. It is a tied-arch pedestrian bridge that provides a convenient route for pedestrians between hotels and the Bilbao Guggenheim Museum. The main structural component is a 15m tall steel arch with a 75m span, consisting of an inclined steel arch linking two platforms with access ramps and stairways on both riverbanks.
Helvetas Nepal Trail bridge experience
1. Nepal is a landlocked country located between India and China with diverse terrain ranging from near sea level to the highest point on Earth. Road construction is very challenging due to the steep slopes and unstable geology.
2. Pedestrian bridges are crucial infrastructure for rural communities in Nepal, as 70% of the population lacks road access. Suspension bridges built using local materials and skills have helped ensure access to basic services for millions.
3. Over several decades, Nepal has developed expertise in pedestrian bridge technology tailored to the local context. Standard designs and training programs have been established to support both community-led and contractor-built bridge projects.
FINAL KGB SUBMISSION
The document outlines the construction process for a replica of the Kingsgate Footbridge in Bircham Newton, including setting out the site, installing pile caps and piles, forming and pouring concrete for the caps and decks, installing steel piers and rotating the pre-cast concrete sections into position to form the completed bridge structure over 4.5 days. It provides details on the construction sequence, organization of workers, health and safety plans, calculations, and other documentation required for the project.
Pultrusion and frp bridge case study
The document discusses pultrusion, a manufacturing process used to produce composite bridge components. Pultrusion involves pulling reinforced fibers through a resin bath and heated die to form constant cross-section parts. It results in high strength, consistent quality products. As an example, the Fiberline pedestrian bridge in Denmark was constructed entirely of pultruded fiber reinforced polymer profiles and has a 100-year expected lifespan requiring only minor maintenance. Pultrusion is presented as a cost-effective method for producing durable bridge components from composites.
Engineering Drawing: Chapter 07 dimensioning
The document discusses dimensioning techniques including:
1) Dimensioning components like extension lines, dimension lines, and dimension numbers and their proper usage.
2) Dimensioning common features like lengths, angles, arcs, holes, and their associated dimensioning methods.
3) Recommended practices for placement of dimensions and problem solving steps for dimensioning objects.
Pré dimensionamento estrutural
O documento fornece informações iniciais sobre o pré-dimensionamento de elementos estruturais de concreto armado, como pilares, vigas, lajes e outros. Ele destaca a importância de se integrar a estrutura ao projeto arquitetônico de forma coerente e econômica. As dimensões sugeridas levam em conta critérios como cargas, vãos e materiais.
Samll bridge design
This document provides guidance on constructing footbridges at the community and district level. It discusses footbridge specifications, types of footbridges, and design considerations. The main types covered are bamboo, timber log, sawn timber, steel, reinforced concrete, and suspension bridges. Selection criteria include span, cost, materials, and maintenance requirements. Timber designs are then covered in more detail, with examples of basic, improved, and longer span bamboo footbridges. Regular maintenance is emphasized for all bridge types.
Viewers also liked (8)
More from Naoise
Sk 069 - ga working drawings
This document appears to be a preliminary site plan or map showing proposed infrastructure for a cycle route scheme between Talbot Street and Clontarf Road in Dublin. It includes a legend explaining symbols for different elements such as proposed and existing roads, paths, cycle tracks, parking areas, trees and more. The map is divided into multiple sections at different scales ranging from 1:12 to 1:250. Key locations labeled on the maps include Connolly Memorial, Arkle House, hotels, banks, bus stops and more.
17203 consultative forum no 3 30112018 issue compressed
This document contains the progress update from the third consultative committee meeting for the Clontarf to City Centre Cycle Route project. It was presented by Thomas Leonard from Roughan & O'Donovan Consulting Engineers. The update included information on the plan alignment for multiple sections of the proposed cycle route from Amiens Street to Clontarf Road and details on the 3D model and utility design for the 5 Lamps Junction area.
Griffith Avenue SHD ncac presentation 21 01-2019
Presentation of the Griffith Avenue Strategic Housing Development proposal to the North Central Area Committee on 21/01/2019
Report no. 082019 of the environment strategic policy committee changes to ...
This document provides a summary of a report from Dublin City Council regarding proposed new waste bye laws. The key points are:
1) Dublin City Council has drafted new waste bye laws to replace the existing 2013 bye laws due to changes in legislation governing waste and regional waste management plans.
2) The proposed bye laws include provisions around waste collection services, segregation of household waste, and designated collection days, as well as additional rules for multi-unit properties and the central commercial district.
3) Public consultation was held on the draft bye laws and seven submissions were received. The report analyses the issues raised and recommends some amendments to the bye laws.
4) The Environment Strategic Policy Committee reviewed the bye
DCC CEO Report to ABP
Report from CEO of Dublin City Council to An Bord Pleanala RE: Strategic Housing Development ABP 300559-18 - lands to the east of St Pauls College
2017.09.07 dcc120033 cyclist safety slides
Several safety concerns were raised regarding existing cycling facilities, including dangerous conflicts between pedestrians and cyclists, a request for signage to clarify pedestrian and cycling areas, and substandard access points. The proposed schemes aim to significantly improve safety by minimizing conflicts through providing segregated facilities for pedestrians and cyclists, segregating cyclists from traffic and parking areas, and clarifying areas in parks.
2017.08.28 db ncac&cac clontarf to city centre cycle route part 8 expla...
1. Amendments have been made to the Clontarf to City Centre Cycle Route Part 8 proposal to minimize the removal of mature trees in Fairview Park.
2. One inbound traffic lane will be removed for 350m through Fairview Park to provide space for a segregated inbound cycle track between the rows of trees. This will allow the retention of 42 of the 46 trees.
3. The amendments will result in some increased inbound queuing during morning rush hours but will significantly reduce tree removal. The rest of the scheme and number of outbound lanes remains unchanged.
Abp150416
The document is a letter supporting various appeals against a planning permission granted by Dublin City Council regarding a development at 1, 1A and 1B Sybil Hill Road in Raheny, Dublin 5. The letter raises concerns that [1] the 3 to 5-storey scale of the front of the development will negatively impact the vista of Sybil Hill House and along Sybil Hill Road, [2] there is already traffic congestion in the area that a traffic study should address before worsening the situation, and [3] the assertion that the site is within 500 meters of public transport is refuted as any commuter would have to travel over 500 meters to reach the transport hub.
DCC Dollymount Flood Defence Report
1. The document summarizes key terms related to the Dollymount Flood Defence Level project, including the current estimated 100-year flood level, future sea level rise estimates, associated wave heights, and recommended freeboard allowances.
2. It is proposing to reduce the flood protection level by 100mm to provide for a 1 in 100 year flood event rather than a 1 in 200 year level, subject to assessing increased risk to local businesses and homes. An additional 200mm reduction is proposed for future sea level rise estimates, meaning the flood defence will need rebuilding within 25 years.
3. The 300mm total reduction would lower the highest point of the flood wall to 800mm along a 450m stretch, allowing clear
Dollymount Flood Defence schematic
This document outlines flood defence levels for Dollymount including the minimum safety allowance of 300mm or 12 inches, the lowest road level of 1.60m or 5'3" for a 1% annual exceedance probability (100 year) event, and recommendations for additional freeboard allowances up to 3.65m to account for factors like associated wave height, global warming, and future sea level rise over the next 25 years.
Dollymount flood wall review feb 2016 rev2
This document provides a summary of an external review of the Dollymount Flood Wall design in Dublin. It was prepared by Dr. Jimmy Murphy of the MaREI Centre at University College Cork in February 2016. The review assesses the appropriateness of the wall's current crest level of 4.25m and examines alternative design solutions. It analyzes the extreme water levels, sea level rise projections, wave conditions, and minimum freeboard used in the original design. The review finds that the most relevant extreme water level to use is 3.25m, higher than indicated in some original documents. It concludes by recommending the wall height be sufficient to protect against flooding risks and provide views of the environment.
Draft Litter Management Plan
Dublin City Council has drafted a Litter Management Plan for 2016-2018 to reduce litter and keep Dublin clean. The plan reviews the previous 2008-2011 plan and sets objectives in the key areas of resources, partnership, and enforcement. It aims to improve cleanliness in Dublin over the next three years through an integrated approach using the city's resources, partnerships with citizens, and litter enforcement.
Dollymount externalexpert ommgoc
Dublin City Councillors unanimously approved procuring an external expert to independently assess the height of the partially constructed and proposed new sea wall along Clontarf Road between the Wooden Bridge and the Causeway to Bull Island. Representations from members of the public contend that the new wall will obscure their views of Bull Island. The brief for the external expert includes reviewing previous reports on climate change and flood defense, analyzing the components that determine the wall height, and assessing the suitability of a glass wall or temporary barriers for the highest portions of the proposed new wall. The expert will draft a report within 3 weeks with final report in 4 weeks, outlining conclusions on the adequacy of the existing or proposed design level for coastal flood
Dollymount External Expert
The Dublin City Council has decided to hire an external expert to re-assess the height of the partially constructed sea wall along Clontarf Road between the Wooden Bridge and Causeway to Bull Island. Some local residents have requested a review as they believe the wall obscures views of Bull Island. The brief for the expert includes reviewing previous reports on flood defences, analyzing the constituents that determine wall height, and drafting a report within 2-3 weeks commenting on the appropriate height and feasibility of installing glass walls.
Proposed additional car parking facility - south of Timber Bridge
Leaflets to local residents & businesses containing details of proposed additional carparking south of the timber bridge as part of the S2S works
Fairview Christmas Lights Switchon
The annual Christmas Lights switch on will take place on Friday December 4th at 5pm at the junction of Fairview and Malahide Road in front of City Cycles, with music and songs by the North Dublin Community Gospel Choir. The event is sponsored by Brams Cafe, Dublin City Council and the Fairview/Marino Business Association.
S2S Presentation to DCC - 11th November 2015
This is the presentation in relation to the S2S project given to DCC Members on 11/11/15 - worth a look
More from Naoise (20)
17203 consultative forum no 3 30112018 issue compressed
17203 consultative forum no 3 30112018 issue compressed
Report no. 082019 of the environment strategic policy committee changes to ...
Report no. 082019 of the environment strategic policy committee changes to ...
2017.08.28 db ncac&cac clontarf to city centre cycle route part 8 expla...
2017.08.28 db ncac&cac clontarf to city centre cycle route part 8 expla...
Proposed additional car parking facility - south of Timber Bridge
Proposed additional car parking facility - south of Timber Bridge
Recently uploaded
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
By Design, not by Accident - Agile Venture Bolzano 2024
As presented at the Agile Venture Bolzano, 4.06.2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Recently uploaded (20)
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
By Design, not by Accident - Agile Venture Bolzano 2024
By Design, not by Accident - Agile Venture Bolzano 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
Fairview footbridge 260312_
- 1. Fairview Footbridge Presented by Gordon Rowland, Road Design Division, Roads & Traffic Department, Dublin City Council.
- 3. Fairview Footbridge Refurbishment Replace section of bridge across carriageway Raise north end of bridge slightly to increase clearance Shot blast, repair and paint existing ramps and stairways Provide new surfacing to ramps Provide vehicle crash protection to bridge
- 4. PLAN OF EXISTING FOOTBRIDGE
- 5. Refurbishment Sequence Fabricate new section of bridge across carriageway Erect temporary stairways to each end of bridge Replace section of bridge across carriageway during night road closure Remove (during closure) one section of ramp on north side to adjust height Open bridge to pedestrians the next morning Refurbish existing ramps and stairways Reinstall section of ramp on north side during night road closure Install crash protection to bridge Open ramps and stairways to pedestrians Remove temporary stairways