This document provides information about the AX15 5-speed manual transmission used in Jeep XJ vehicles, including:
- The AX15 is a synchromesh manual transmission with 5 forward gears and 1 reverse gear. Fifth gear is an overdrive with a ratio of 0.79:1.
- Diagnosis of common issues like hard shifting, low lubricant level, and transmission noise are discussed along with their potential causes.
- Specifications like lubricant type, gear ratios, component locations, and service procedures are outlined.
The document provides instructions and information for operating and customizing the features of a transmitter. It includes sections on adjusting driving position, steering wheel and throttle trigger tension, trim position, battery safety, transmitter controls and buttons, function pages for programming, settings for dual rate steering, end point adjustment, and other settings. The document contains detailed steps, diagrams, and explanations to help users understand and configure the different transmitter options.
The document provides information on the AX5 manual transmission, including its gear ratios, recommended lubricant, identification code location, diagnosis of issues like hard shifting and noise, and procedures for removal and installation. It contains instructions on removing and installing the transmission, adapter/extension housing seals, and related components. The document also includes diagrams labeling the transmission's internal gears and identifying sensors, plugs, and other parts.
The document provides information about manual transmissions and transfer cases used in Jeep vehicles, including:
- An index listing transmission and transfer case models covered
- Service information for the AX15 5-speed manual transmission, including identification, gear ratios, lubrication, diagnosis and repair procedures
- Procedures for transmission removal, disassembly, component inspection and installation
This document provides information about manual transmissions and transfer cases used in Jeep vehicles, including:
- The AX 4/5 manual transmission is a 4-speed or 5-speed transmission used in 2.5L engine applications.
- Specifications are provided for gear ratios, lubricants, identification, cleaning and inspection procedures.
- Removal and installation instructions are given for the AX 4/5 transmission, along with common diagnosis tips for issues like low lubricant levels and hard shifting.
2009 mitsubishi eclipse service repair manualfjskekdmmmse
This document provides instructions and reference information for servicing vehicles, including:
- How to use the service manual and understand terminology, procedures, and symbols
- Guidelines for troubleshooting vehicle issues systematically
- How to use the troubleshooting and inspection service points sections
- What is included in the troubleshooting contents section
2008 Mitsubishi Eclipse Service Repair Manualfudjjsekkmdmm
This is the Highly Detailed factory service repair manual for the2008 MITSUBISHI ECLIPSE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2008 MITSUBISHI ECLIPSE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2008 MITSUBISHI ECLIPSE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
2010 mitsubishi eclipse service repair manualfksepdksejdmm
This document provides instructions and reference information for servicing vehicles, including:
- How to use the service manual and understand terminology, procedures, and symbols
- Guidelines for troubleshooting vehicle issues systematically
- How to use the troubleshooting and inspection service points sections
- What is included in the troubleshooting contents section
2006 Mitsubishi Eclipse Service Repair Manualhjjdksmem
This is the Highly Detailed factory service repair manual for the2006 MITSUBISHI ECLIPSE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2006 MITSUBISHI ECLIPSE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2006 MITSUBISHI ECLIPSE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
The document provides instructions and information for operating and customizing the features of a transmitter. It includes sections on adjusting driving position, steering wheel and throttle trigger tension, trim position, battery safety, transmitter controls and buttons, function pages for programming, settings for dual rate steering, end point adjustment, and other settings. The document contains detailed steps, diagrams, and explanations to help users understand and configure the different transmitter options.
The document provides information on the AX5 manual transmission, including its gear ratios, recommended lubricant, identification code location, diagnosis of issues like hard shifting and noise, and procedures for removal and installation. It contains instructions on removing and installing the transmission, adapter/extension housing seals, and related components. The document also includes diagrams labeling the transmission's internal gears and identifying sensors, plugs, and other parts.
The document provides information about manual transmissions and transfer cases used in Jeep vehicles, including:
- An index listing transmission and transfer case models covered
- Service information for the AX15 5-speed manual transmission, including identification, gear ratios, lubrication, diagnosis and repair procedures
- Procedures for transmission removal, disassembly, component inspection and installation
This document provides information about manual transmissions and transfer cases used in Jeep vehicles, including:
- The AX 4/5 manual transmission is a 4-speed or 5-speed transmission used in 2.5L engine applications.
- Specifications are provided for gear ratios, lubricants, identification, cleaning and inspection procedures.
- Removal and installation instructions are given for the AX 4/5 transmission, along with common diagnosis tips for issues like low lubricant levels and hard shifting.
2009 mitsubishi eclipse service repair manualfjskekdmmmse
This document provides instructions and reference information for servicing vehicles, including:
- How to use the service manual and understand terminology, procedures, and symbols
- Guidelines for troubleshooting vehicle issues systematically
- How to use the troubleshooting and inspection service points sections
- What is included in the troubleshooting contents section
2008 Mitsubishi Eclipse Service Repair Manualfudjjsekkmdmm
This is the Highly Detailed factory service repair manual for the2008 MITSUBISHI ECLIPSE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2008 MITSUBISHI ECLIPSE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2008 MITSUBISHI ECLIPSE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
2010 mitsubishi eclipse service repair manualfksepdksejdmm
This document provides instructions and reference information for servicing vehicles, including:
- How to use the service manual and understand terminology, procedures, and symbols
- Guidelines for troubleshooting vehicle issues systematically
- How to use the troubleshooting and inspection service points sections
- What is included in the troubleshooting contents section
2006 Mitsubishi Eclipse Service Repair Manualhjjdksmem
This is the Highly Detailed factory service repair manual for the2006 MITSUBISHI ECLIPSE, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2006 MITSUBISHI ECLIPSE Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Engine Lubrication
Fuel
Engine Cooling
Intake and Exhaust
Engine Electrical
Engine and Emission Control
Clutch
Manual Transmission
Automatic Transmission
Front Axle
Rear Axle
Wheel and Tire
Power Plant Mount
Front Suspension
Rear Suspension
Service Brakes
Parking Brakes
Steering
Body
Exterior
Interior and Supplemental Restraint System
Chassis Electrical
Heater, Air Conditioning and Ventilation
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2006 MITSUBISHI ECLIPSE Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
The document provides information on turn signal and hazard warning systems. It describes the main components, which include a combination flasher, multi-function switch, turn signal indicator lamps, and turn signal lamps. It outlines procedures for diagnosing issues and testing components like the flasher and switch. Removal and installation instructions are provided for the multi-function switch and combination flasher.
This document provides information about steering systems for ZJ vehicles. It describes the major components of the power steering system including the recirculating ball steering gear, steering linkage, power steering pump, and steering column. It provides details on identifying codes for the steering gear and pump as well as diagnosing common noise complaints.
The document provides information about rear suspension and axles for a Grand Cherokee vehicle. It describes the main components of the rear suspension system, including coil springs, upper and lower suspension arms, shock absorbers, stabilizer bar, track bar, and jounce bumpers. It also explains how the standard differential allows the axle shafts to rotate at different speeds when turning corners to compensate for the longer path of the outside wheel. The Model 35 axle used in the Grand Cherokee can be equipped with an optional Trac-Lok limited slip differential.
This document provides an overview of fuel delivery systems for vehicles with 4.0L and 5.2L engines. It describes the components of the fuel pump module, which is mounted in the fuel tank and contains the electric fuel pump, fuel pressure regulator, and in-tank fuel filter. The fuel pressure regulator is no longer mounted on the fuel rail. Procedures are provided for releasing fuel system pressure before servicing, and for testing fuel system pressure.
This document appears to be an electronic service manual for the 1995 Jeep Grand Cherokee. The logo on the page links to instructions when clicked. The page requests the user click the link for further information.
The document provides information on standard service procedures for engines, including form-in-place gaskets, honing cylinder bores, measuring crankshaft and connecting rod bearing clearances using Plastigage, repairing damaged or worn threads using a Heli-Coil tap, and servicing a 4.0L engine assembly (short block). It includes diagrams and step-by-step instructions for compression testing, measuring bearing clearance, and honing cylinder bores. Tables of contents and indexes provide page references for additional information on specific engines and procedures.
This document provides information about power mirrors and an automatic day/night rear view mirror on Jeep Grand Cherokee models. It describes the major components of these systems and their functions. The document also provides diagnostic procedures to test the power mirror switch and motors, as well as the automatic rear view mirror. Finally, it lists the service procedures for removing and installing the power mirror switch and removing the power mirrors and automatic rear view mirror.
The document discusses various exterior body components of a vehicle. It provides removal and installation instructions for components like the grille, headlamps, hood, hood latches and related parts. The document is organized in sections covering the grille/reinforcement, radiator support, hood, hood hinges/latches/striker and other exterior parts. Diagrams and step-by-step instructions are provided for servicing these exterior body parts.
This document provides information about power seats in Jeep Grand Cherokee models. It describes the major components of the power seat system, including the power seat switch and three reversible motors that operate the seat adjustments. The document provides guidance on diagnosing issues with the power seat motors or switch, including continuity tests of the switch connections. It also outlines procedures for removing and installing the power seat switch and motor/adjuster assembly.
This document provides information about a vehicle theft alarm system, including:
- General descriptions of how the system arms, disarms, and responds to unauthorized access attempts.
- Instructions for performing self-diagnosis tests to check the operation of sensors and circuits.
- Procedures for technicians to remove and install the VTA module, which involves removing various dash panel components.
- Steps for technicians to diagnose the system using the self-diagnosis mode and by checking for proper horn responses from sensors.
This document contains information about brakes for a vehicle model. It includes sections on general brake information, ABS brakes, changes for the 1995 model year, brake components, fluids and cleaning products, safety precautions, and an index of topics. The key points are:
- The vehicle uses power assisted four-wheel disc brakes with ABS standard on all models.
- Changes for 1995 include different master cylinder, power brake booster, and hydraulic control unit components for the ABS system.
- Safety precautions for working on brakes include wearing protective equipment and properly disposing of any potential asbestos dust.
This document provides information about exhaust systems and intake manifolds. It discusses the basic components of exhaust systems, including exhaust manifolds, pipes, catalytic converters, heat shields, mufflers and tailpipes. It describes symptoms of exhaust system problems and provides procedures for removing and installing exhaust pipes and manifolds. Intake manifolds and catalytic converters are also discussed.
The document provides general information about emission control systems, including:
1) It describes the different emission control components and systems used on 4.0L and 5.2L engines.
2) It explains how the on-board diagnostic system checks for faults in emission components like the EGR and EVAP systems.
3) It provides an overview of the evaporative emission control system and its components like the EVAP canister.
The document provides information about the overhead console in Jeep Grand Cherokee models. It describes the different types of overhead consoles that are used depending on whether the vehicle has a power sunroof option. It also describes the major components in the overhead console including the trip computer, compass, thermometer, reading lamps, remote garage door opener storage, and sunglasses storage. The document provides details on diagnosing issues with these components through self-diagnostic tests and flow charts.
This document provides general information about audio systems for Jeep Grand Cherokee models. It describes components such as radios, speakers, antennas, and amplifiers. It also provides diagnostic procedures and service instructions for removing and installing these components.
This document provides information about cooling system diagnosis and service procedures for a vehicle. It includes:
- An overview of cooling system components and coolant routing
- Diagnosis charts to help identify potential causes of overheating
- Procedures for testing the water pump, draining and refilling the cooling system, and replacing components like the radiator, hoses, thermostat, and water pump.
- Cautions for working on the high-pressure cooling system and ensuring the correct rotating water pump is installed.
This document provides contact information for obtaining special service tools in the United States, Canada, and internationally. The same tools or their equivalent are required for certain vehicle service operations and can be obtained from local sources or through the listed contacts, which include addresses and phone/fax numbers for Miller Special Tools in Michigan and C&D Riley Enterprises in Ontario.
The document provides information about diagnosing issues with a vehicle's rear window defogger system. It describes the major components of the system, including the rear window glass grid, defogger switch, and defogger relay/timer. It then lists steps to test overall system operation and to isolate problems, such as using a voltmeter to check for breaks in the glass grid lines or testing power supply to the relay.
This document provides information on propeller shafts. It discusses:
1) There are three types of propeller shafts used on 4WD vehicles, differing by their joint configurations and whether they include a slip yoke.
2) Universal joints are used to allow the propeller shaft to operate at different angles and are not repairable if damaged.
3) Vibration can be caused by an unbalanced propeller shaft, worn or misaligned universal joints, or other vehicle component issues like loose engine mounts. Diagnosis procedures include measuring runout and clamping sections to isolate the source.
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...Niswey
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
Efficient PHP Development Solutions for Dynamic Web ApplicationsHarwinder Singh
Unlock the full potential of your web projects with our expert PHP development solutions. From robust backend systems to dynamic front-end interfaces, we deliver scalable, secure, and high-performance applications tailored to your needs. Trust our skilled team to transform your ideas into reality with custom PHP programming, ensuring seamless functionality and a superior user experience.
The document provides information on turn signal and hazard warning systems. It describes the main components, which include a combination flasher, multi-function switch, turn signal indicator lamps, and turn signal lamps. It outlines procedures for diagnosing issues and testing components like the flasher and switch. Removal and installation instructions are provided for the multi-function switch and combination flasher.
This document provides information about steering systems for ZJ vehicles. It describes the major components of the power steering system including the recirculating ball steering gear, steering linkage, power steering pump, and steering column. It provides details on identifying codes for the steering gear and pump as well as diagnosing common noise complaints.
The document provides information about rear suspension and axles for a Grand Cherokee vehicle. It describes the main components of the rear suspension system, including coil springs, upper and lower suspension arms, shock absorbers, stabilizer bar, track bar, and jounce bumpers. It also explains how the standard differential allows the axle shafts to rotate at different speeds when turning corners to compensate for the longer path of the outside wheel. The Model 35 axle used in the Grand Cherokee can be equipped with an optional Trac-Lok limited slip differential.
This document provides an overview of fuel delivery systems for vehicles with 4.0L and 5.2L engines. It describes the components of the fuel pump module, which is mounted in the fuel tank and contains the electric fuel pump, fuel pressure regulator, and in-tank fuel filter. The fuel pressure regulator is no longer mounted on the fuel rail. Procedures are provided for releasing fuel system pressure before servicing, and for testing fuel system pressure.
This document appears to be an electronic service manual for the 1995 Jeep Grand Cherokee. The logo on the page links to instructions when clicked. The page requests the user click the link for further information.
The document provides information on standard service procedures for engines, including form-in-place gaskets, honing cylinder bores, measuring crankshaft and connecting rod bearing clearances using Plastigage, repairing damaged or worn threads using a Heli-Coil tap, and servicing a 4.0L engine assembly (short block). It includes diagrams and step-by-step instructions for compression testing, measuring bearing clearance, and honing cylinder bores. Tables of contents and indexes provide page references for additional information on specific engines and procedures.
This document provides information about power mirrors and an automatic day/night rear view mirror on Jeep Grand Cherokee models. It describes the major components of these systems and their functions. The document also provides diagnostic procedures to test the power mirror switch and motors, as well as the automatic rear view mirror. Finally, it lists the service procedures for removing and installing the power mirror switch and removing the power mirrors and automatic rear view mirror.
The document discusses various exterior body components of a vehicle. It provides removal and installation instructions for components like the grille, headlamps, hood, hood latches and related parts. The document is organized in sections covering the grille/reinforcement, radiator support, hood, hood hinges/latches/striker and other exterior parts. Diagrams and step-by-step instructions are provided for servicing these exterior body parts.
This document provides information about power seats in Jeep Grand Cherokee models. It describes the major components of the power seat system, including the power seat switch and three reversible motors that operate the seat adjustments. The document provides guidance on diagnosing issues with the power seat motors or switch, including continuity tests of the switch connections. It also outlines procedures for removing and installing the power seat switch and motor/adjuster assembly.
This document provides information about a vehicle theft alarm system, including:
- General descriptions of how the system arms, disarms, and responds to unauthorized access attempts.
- Instructions for performing self-diagnosis tests to check the operation of sensors and circuits.
- Procedures for technicians to remove and install the VTA module, which involves removing various dash panel components.
- Steps for technicians to diagnose the system using the self-diagnosis mode and by checking for proper horn responses from sensors.
This document contains information about brakes for a vehicle model. It includes sections on general brake information, ABS brakes, changes for the 1995 model year, brake components, fluids and cleaning products, safety precautions, and an index of topics. The key points are:
- The vehicle uses power assisted four-wheel disc brakes with ABS standard on all models.
- Changes for 1995 include different master cylinder, power brake booster, and hydraulic control unit components for the ABS system.
- Safety precautions for working on brakes include wearing protective equipment and properly disposing of any potential asbestos dust.
This document provides information about exhaust systems and intake manifolds. It discusses the basic components of exhaust systems, including exhaust manifolds, pipes, catalytic converters, heat shields, mufflers and tailpipes. It describes symptoms of exhaust system problems and provides procedures for removing and installing exhaust pipes and manifolds. Intake manifolds and catalytic converters are also discussed.
The document provides general information about emission control systems, including:
1) It describes the different emission control components and systems used on 4.0L and 5.2L engines.
2) It explains how the on-board diagnostic system checks for faults in emission components like the EGR and EVAP systems.
3) It provides an overview of the evaporative emission control system and its components like the EVAP canister.
The document provides information about the overhead console in Jeep Grand Cherokee models. It describes the different types of overhead consoles that are used depending on whether the vehicle has a power sunroof option. It also describes the major components in the overhead console including the trip computer, compass, thermometer, reading lamps, remote garage door opener storage, and sunglasses storage. The document provides details on diagnosing issues with these components through self-diagnostic tests and flow charts.
This document provides general information about audio systems for Jeep Grand Cherokee models. It describes components such as radios, speakers, antennas, and amplifiers. It also provides diagnostic procedures and service instructions for removing and installing these components.
This document provides information about cooling system diagnosis and service procedures for a vehicle. It includes:
- An overview of cooling system components and coolant routing
- Diagnosis charts to help identify potential causes of overheating
- Procedures for testing the water pump, draining and refilling the cooling system, and replacing components like the radiator, hoses, thermostat, and water pump.
- Cautions for working on the high-pressure cooling system and ensuring the correct rotating water pump is installed.
This document provides contact information for obtaining special service tools in the United States, Canada, and internationally. The same tools or their equivalent are required for certain vehicle service operations and can be obtained from local sources or through the listed contacts, which include addresses and phone/fax numbers for Miller Special Tools in Michigan and C&D Riley Enterprises in Ontario.
The document provides information about diagnosing issues with a vehicle's rear window defogger system. It describes the major components of the system, including the rear window glass grid, defogger switch, and defogger relay/timer. It then lists steps to test overall system operation and to isolate problems, such as using a voltmeter to check for breaks in the glass grid lines or testing power supply to the relay.
This document provides information on propeller shafts. It discusses:
1) There are three types of propeller shafts used on 4WD vehicles, differing by their joint configurations and whether they include a slip yoke.
2) Universal joints are used to allow the propeller shaft to operate at different angles and are not repairable if damaged.
3) Vibration can be caused by an unbalanced propeller shaft, worn or misaligned universal joints, or other vehicle component issues like loose engine mounts. Diagnosis procedures include measuring runout and clamping sections to isolate the source.
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...Niswey
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
Efficient PHP Development Solutions for Dynamic Web ApplicationsHarwinder Singh
Unlock the full potential of your web projects with our expert PHP development solutions. From robust backend systems to dynamic front-end interfaces, we deliver scalable, secure, and high-performance applications tailored to your needs. Trust our skilled team to transform your ideas into reality with custom PHP programming, ensuring seamless functionality and a superior user experience.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART KALYAN CHART
The Most Inspiring Entrepreneurs to Follow in 2024.pdfthesiliconleaders
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...YourLegal Accounting
Effective financial management is important for expansion and scalability in the ever-changing US business environment. White Label Bookkeeping services is an innovative solution that is becoming more and more popular among businesses. These services provide a special method for managing financial duties effectively, freeing up companies to concentrate on their main operations and growth plans. We’ll look at how White Label Bookkeeping can help US firms expand and develop in this blog.
Prescriptive analytics BA4206 Anna University PPTFreelance
Business analysis - Prescriptive analytics Introduction to Prescriptive analytics
Prescriptive Modeling
Non Linear Optimization
Demonstrating Business Performance Improvement
The report *State of D2C in India: A Logistics Update* talks about the evolving dynamics of the d2C landscape with a particular focus on how brands navigate the complexities of logistics. Third Party Logistics enablers emerge indispensable partners in facilitating the growth journey of D2C brands, offering cost-effective solutions tailored to their specific needs. As D2C brands continue to expand, they encounter heightened operational complexities with logistics standing out as a significant challenge. Logistics not only represents a substantial cost component for the brands but also directly influences the customer experience. Establishing efficient logistics operations while keeping costs low is therefore a crucial objective for brands. The report highlights how 3PLs are meeting the rising demands of D2C brands, supporting their expansion both online and offline, and paving the way for sustainable, scalable growth in this fast-paced market.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Enhancing Adoption of AI in Agri-food: IntroductionCor Verdouw
Introduction to the Panel on: Pathways and Challenges: AI-Driven Technology in Agri-Food, AI4Food, University of Guelph
“Enhancing Adoption of AI in Agri-food: a Path Forward”, 18 June 2024
Enhancing Adoption of AI in Agri-food: Introduction
Exj 21 a
1. XJ TRANSMISSION AND TRANSFER CASE 21 - 1
TRANSMISSION AND TRANSFER CASE
CONTENTS
page page
AX15 MANUAL TRANSMISSION . . . . . . . . . . . . 1 NV231 TRANSFER CASE . . . . . . . . . . . . . . . . . . 7
AX15 MANUAL TRANSMISSION
INDEX
page page
GENERAL INFORMATION DIAGNOSIS AND TESTING
AX 15 MANUAL TRANSMISSION . . . . . . . . .. . . 1 HARD SHIFTING . . . . . . . . . . .............. 3
TRANSMISSION ASSEMBLY INFORMATION . . . 3 LOW LUBRICANT LEVEL . . . . .............. 3
TRANSMISSION GEAR RATIOS . . . . . . . . . .. . . 2 TRANSMISSION NOISE . . . . . .............. 3
TRANSMISSION IDENTIFICATION . . . . . . . .. . . 1 REMOVAL AND INSTALLATION
TRANSMISSION LUBRICANT . . . . . . . . . . .. . . 1 TRANSMISSION . . . . . . . . . . .............. 3
TRANSMISSION SHIFT PATTERN . . . . . . . .. . . 1 SPECIFICATIONS
TRANSMISSION SWITCH AND PLUG TORQUE . . . . . . . . . . . . . . . . .............. 6
LOCATIONS . . . . . . . . . . . . . . . . . . . . . . .... 2
GENERAL INFORMATION TRANSMISSION SHIFT PATTERN
The AX 15 shift pattern is shown in (Fig. 3). First
AX 15 MANUAL TRANSMISSION and second and third and fourth gear ranges are in
The AX 15 is a 5–speed, synchromesh, manual line for improved shifting. Fifth and reverse gear
transmission. Fifth gear is an overdrive range with a ranges are also in line at the extreme right of the
ratio of 0.79:1. The shift mechanism is integral and pattern (Fig. 3).
mounted in the shift tower portion of the adapter The AX 15 is equipped with a reverse lockout
housing (Fig. 1). mechanism. The shift lever must be moved through
the Neutral detent before making a shift to reverse.
TRANSMISSION IDENTIFICATION
The AX 15 identification code numbers are on the TRANSMISSION LUBRICANT
bottom surface of the transmission gear case (Fig. 2). Recommended lubricant for AX 15 transmissions is
The first number is year of manufacture. The sec- Mopar 75W–90, API Grade GL–5 gear lubricant, or
ond and third numbers indicate month of manufac- equivalent.
ture. The next series of numbers is the transmission Correct lubricant level is from the bottom edge, to
serial number. no more than 6 mm (1/4 in.) below the bottom edge of
the fill plug hole.
Approximate dry fill lubricant capacity is:
• 3.10 liters (3.27 qts.) in 4–wheel drive models
2. 21 - 2 TRANSMISSION AND TRANSFER CASE XJ
GENERAL INFORMATION (Continued)
Fig. 1 AX 15 Manual Transmission
Fig. 3 AX 15 Shift Pattern
Fig. 2 Identification Code Number Location
TRANSMISSION SWITCH AND PLUG LOCATIONS
The fill plug is at the driver side of the gear case
(Fig. 4).
The drain plug and backup light switch are on the
passenger side of the gear case (Fig. 5).
TRANSMISSION GEAR RATIOS
AX 15 gear ratios are:
First gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.83:1
Second gear . . . . . . . . . . . . . . . . . . . . . . . . . . 2.33:1
Third gear . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.44:1
Fourth gear . . . . . . . . . . . . . . . . . . . . . . . . . . 1.00:1
Fifth gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.79:1
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.22:1
Fig. 4 Fill Plug Location
3. XJ TRANSMISSION AND TRANSFER CASE 21 - 3
GENERAL INFORMATION (Continued)
tions will ensure an accurate check and avoid an
under–or–over fill condition.
HARD SHIFTING
Hard shifting is usually caused by a low lubricant
level, improper or contaminated lubricants, compo-
nent damage, incorrect clutch adjustment, or by a
damaged clutch pressure plate or disc.
Substantial lubricant leaks can result in gear, shift
rail, synchro and bearing damage. If a leak goes
undetected for an extended period, the first indica-
tions of a problem are usually hard shifting and
noise.
Incorrect or contaminated lubricants can also con-
tribute to hard shifting. The consequence of using
non–recommended lubricants is noise, excessive
Fig. 5 Drain Plug/Backup Light Switch Location wear, internal bind and hard shifting.
Improper clutch release is a frequent cause of hard
TRANSMISSION ASSEMBLY INFORMATION shifting. Incorrect adjustment or a worn, damaged
Lubricate the transmission components with gear pressure plate or disc can cause incorrect release. If
lubricant during assembly. Use petroleum jelly to the clutch problem is advanced, gear clash during
lubricate seal lips and/or hold parts in place during shifts can result.
installation. Worn or damaged synchro rings can cause gear
clash when shifting into any forward gear. In some
new or rebuilt transmissions, new synchro rings may
DIAGNOSIS AND TESTING
tend to stick slightly causing hard or noisy shifts. In
most cases, this condition will decline as the rings
LOW LUBRICANT LEVEL
wear–in.
A low transmission lubricant level is generally the
result of a leak, inadequate lubricant fill, or an incor-
TRANSMISSION NOISE
rect lubricant level check.
Most manual transmissions make some noise dur-
Leaks can occur at the mating surfaces of the gear
ing normal operation. Rotating gears can generate a
case, intermediate plate and adapter or extension
mild whine that may only be audible at extreme
housing, or from the front/rear seals. A suspected
speeds.
leak could also be the result of an overfill condition.
Severe, obviously audible transmission noise is
Leaks at the rear of the extension or adapter hous-
generally the result of a lubricant problem. Insuffi-
ing will be from the housing oil seals. Leaks at com-
cient, improper, or contaminated lubricant can pro-
ponent mating surfaces will usually be the result of
mote rapid wear of gears, synchros, shift rails, forks
inadequate sealer, gaps in the sealer, incorrect bolt
and bearings. The overheating caused by a lubricant
tightening, or use of a non–recommended sealer.
problem, can also lead to gear breakage.
A leak at the front of the transmission will be from
either the front bearing retainer or retainer seal.
Lubricant may be seen dripping from the clutch REMOVAL AND INSTALLATION
housing after extended operation. If the leak is
severe, it may also contaminate the clutch disc caus- TRANSMISSION
ing slip, grab and chatter.
Transmissions filled from air or electrically pow- REMOVAL
ered lubricant containers can be under filled. This 1. Disconnect the battery negative cable.
generally happens when the container delivery mech- 2. Remove the shifter boot and shifter.
anism is improperly calibrated. Always check the 3. Raise the vehicle on a hoist.
lubricant level after filling to avoid an under fill con- 4. Drain the transmission fluid (Fig. 6).
dition. 5. Support the engine and transmission with an
A correct lubricant level check can only be made adjustable jack stand.
when the vehicle is level; use a drive–on hoist to 6. Remove exhaust pipe and heat shield.
ensure this. Also allow the lubricant to settle for a 7. Mark the front and rear propeller shafts for
minute or so before checking. These recommenda- installation alignment (Fig. 7).
8. Remove the front propeller shaft.
4. 21 - 4 TRANSMISSION AND TRANSFER CASE XJ
REMOVAL AND INSTALLATION (Continued)
Fig. 6 Drain Plug and Backup Light Switch Location
Fig. 8 Vehicle Speed Sensor
Fig. 7 Marking Propeller Shaft and Axle Yoke
9. Remove the rear propeller shaft.
10. Remove the transmission skid plate.
11. Disconnect the transfer case linkage and vehi-
cle speed sensor electrical connector and vent tube
hose (Fig. 8).
Fig. 9 Engine Speed Sensor
12. Reposition the adjustable jackstand under the
engine. 21. Remove the lower transmission bolts.
13. Place a transmission jack under the transmis- 22. Remove the transmission assembly from the
sion and secure the transmission with safety chains. vehicle.
14. Remove the rear transmission mount.
15. Remove the rear crossmember. INSTALLATION
16. Remove the transfer case assembly. Refer to 1. Mount the transmission on a transmission jack
Transfer Case removal later in this Group. and secure the transmission with safety chains.
17. Lower the engine and transmission no more 2. Install the transmission to the vehicle (Fig. 10).
than 7.6 cm. 3. Install the two (2) lower transmission bolts.
18. Remove the two (2) upper and two (2) mid Tighten the bolts to 74.6 N·m.
clutch housing to engine bolts. 4. Install the clutch slave cylinder to the clutch
19. Remove the engine speed sensor (crankshaft housing.
position sensor) (Fig. 9). 5. Install the engine speed sensor (crankshaft posi-
20. Remove the clutch slave cylinder from the tion sensor) to the vehicle (Fig. 9).
clutch housing. 6. Install the two (2) upper clutch housing to
engine bolts. Tighten the bolts to 36.6 N·m.
5. XJ TRANSMISSION AND TRANSFER CASE 21 - 5
REMOVAL AND INSTALLATION (Continued)
Fig. 10 Transmission to Engine Mounting
9. Install the transfer case assembly. Refer to
Transfer Case installation later in this Group.
10. Install the rear crossmember.
11. Install the rear transmission mount.
12. Connect the transfer case linkage and vehicle
speed sensor electrical connector and vent tube (Fig.
8).
13. Install the transmission skid plate.
14. Align and install the front and rear propeller
shafts.
15. Install the exhaust pipe and heat shield.
16. Remove the transmission jack.
17. Fill the transmission with the proper fluid
(Fig. 12).
18. Remove the adjustable jackstand from under
the engine.
19. Lower the vehicle from the hoist.
20. Install the shifter boot and shifter.
21. Reconnect the battery negative cable.
Fig. 11 Clutch Housing to Transmission
7. Install the two (2) mid clutch housing to engine
bolts. Tighten the bolts to 58.3 N·m.
8. Raise the engine and transmission with the
adjustable jackstand.
6. 21 - 6 TRANSMISSION AND TRANSFER CASE XJ
REMOVAL AND INSTALLATION (Continued)
SPECIFICATIONS
TORQUE
DESCRIPTION TORQUE
Clutch Housing to Engine Top (2) Bolts . 36.6 N·m (27
ft. lbs.)
Clutch Housing to Engine Mid-Point (2) Bolts . . 58.3
N·m (43 ft. lbs.)
Clutch Housing to Engine Bottom (2) Bolts . 74.6 N·m
(55 ft. lbs.)
Clutch Housing to Transmission bolts . 38.0 N·m (28 ft.
lbs.)
Transfer Case to Transmission Attaching Nuts . 35 N·m
(26 ft. lbs.)
Fig. 12 Fill Plug Location Propeller Shaft Bolts . . . . . . . 26.5 N·m (19.5 ft. lbs.)
7. XJ TRANSMISSION AND TRANSFER CASE 21 - 7
NV231 TRANSFER CASE
INDEX
page page
GENERAL INFORMATION REAR RETAINER BUSHING AND SEAL . . . . . . 10
NV231 TRANSFER CASE . . . . . . . . . . . . . . . . . 7 SHIFT LEVER . . . . . . . . . . . . . . . . . . . . . . . . . . 8
RECOMMENDED LUBRICANT AND SPEEDOMETER . . . . . . . . . . . . . . . . . . . . . . . . 8
FILL LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TRANSFER CASE . . . . . . . . . . . . . . . . . . . . . . . 8
TRANSFER CASE IDENTIFICATION . . . . . . . . . 7 SPECIFICATIONS
DIAGNOSIS AND TESTING TORQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NV231 DIAGNOSIS . . . . . . . . . . . . . . . . . . . . . . 8 SPECIAL TOOLS
REMOVAL AND INSTALLATION SPECIAL TOOLS—NV231 . . . . . . . . . . . . . . . . 12
FRONT OUTPUT SHAFT SEAL . . . . . . . . . . . . 10
GENERAL INFORMATION power in off road situations. Low range reduction
ratio is 2.72:1.
NV231 TRANSFER CASE
The NV231 is a part-time transfer case with a low SHIFT MECHANISM
range reduction gear system. The NV231 has three Operating ranges are selected with a floor mounted
operating ranges plus a Neutral position. A low range shift lever. The shift lever is connected to the trans-
system provides a reduction ratio for increased low fer case range lever by an adjustable linkage rod. A
speed torque capability. straight line shift pattern is used. Range positions
The input gear is splined to the transmission out- are marked on the shifter bezel cover plate.
put shaft. The input gear drives the mainshaft
through the planetary assembly and range hub. The TRANSFER CASE IDENTIFICATION
front output shaft is operated by a drive chain that A circular ID tag is attached to the rear case of
connects the shaft to a drive sprocket on the main- each transfer case (Fig. 1). The ID tag provides the
shaft. The drive sprocket is engaged/disengaged by transfer case model number, assembly number, serial
the mode fork, which operates the mode sleeve and number, and low range ratio.
hub. The sleeve and hub are not equipped with a The transfer case serial number also represents
synchronizer mechanism for shifting. the date of build.
The geartrain is mounted in two aluminum case
halves attached with bolts. The mainshaft front and
rear bearings are mounted in aluminum retainer
housings bolted to the case halves.
OPERATING RANGES
Transfer case operating ranges are:
• 2WD (2-wheel drive)
• 4x4 (4-wheel drive)
• 4 Lo (4-wheel drive low range
The 2WD range is for use on any road surface at
any time.
The 4x4 and 4 Lo ranges are for off road use only.
They are not for use on hard surface roads. The only
exception being when the road surface is covered by
ice and snow.
The low range reduction gear system is operative Fig. 1 Fill/Drain Plug And I.D. Tag Locations
in 4 Lo range only. This range is for extra pulling
8. 21 - 8 TRANSMISSION AND TRANSFER CASE XJ
GENERAL INFORMATION (Continued)
RECOMMENDED LUBRICANT AND FILL LEVEL
Recommended lubricant for the NV231 transfer
case is Mopar Dexron II, or ATF Plus. Approximate
lubricant fill capacity is 1.2 liters (2.5 pints).
The fill and drain plugs are both in the rear case
(Fig. 1). Correct fill level is to the bottom edge of the
fill plug hole. Be sure the vehicle is level to ensure
an accurate fluid level check.
9. XJ TRANSMISSION AND TRANSFER CASE 21 - 9
DIAGNOSIS AND TESTING
NV231 DIAGNOSIS
10. 21 - 10 TRANSMISSION AND TRANSFER CASE XJ
REMOVAL AND INSTALLATION (7) Connect indicator switch harness to transfer
case switch, if necessary. Secure wire harness to clips
TRANSFER CASE on transfer case.
(8) Align and connect propeller shafts. Tighten
REMOVAL shaft attaching bolts to 26.5 N·m torque.
(1) Shift transfer case into Neutral. (9) Fill transfer case with correct fluid. Refer to
(2) Raise vehicle. Recommended Lubricant And Fill Level section for
(3) Drain transfer case lubricant. proper fluid and capacity.
(4) Mark front and rear propeller shaft yokes for (10) Install rear crossmember and skid plate, if
alignment reference. equipped. Tighten crossmember bolts.
(5) Support transmission with jack stand. (11) Remove transmission jack and support stand.
(6) Remove rear crossmember and skid plate, if (12) Connect shift rod to transfer case range lever.
equipped. (13) Adjust transfer case shift linkage.
(7) Disconnect front/rear propeller shafts at trans- (14) Lower vehicle and verify transfer case shift
fer case. operation.
(8) Disconnect vehicle speed sensor wires.
(9) Disconnect transfer case linkage rod from SHIFT LEVER
range lever.
(10) Disconnect transfer case vent hose (Fig. 2) REMOVAL
and indicator switch harness, if necessary. (1) Shift transfer case into 4L.
(11) Support transfer case with transmission jack. (2) Remove transfer case shifter knob cap.
(12) Secure transfer case to jack with chains. (3) Remove nut holding shifter knob to shift lever.
(13) Remove nuts attaching transfer case to trans- (4) Remove shifter knob.
mission. (5) Raise and support vehicle.
(14) Pull transfer case and jack rearward to disen- (6) Loosen adjusting trunnion lock bolt and slide
gage transfer case. shift rod out of trunnion (Fig. 3). If rod lacks enough
(15) Remove transfer case from under vehicle. travel to come out of trunnion, push trunnion out of
shift lever.
(7) Remove bolts holding shift lever to transmis-
sion.
(8) Separate shift lever from vehicle.
INSTALLATION
(1) Position shift lever on transmission. Use care
when passing the shift lever through the shifter boot
to prevent damage to the shifter boot.
(2) Install bolts to hold shift lever to transmission.
(3) Install trunnion to shift lever, if necessary.
(4) Install shift rod to trunnion, if necessary.
(5) Move shift lever and transfer case to 4L posi-
tion.
(6) Tighten trunnion lock bolt.
(7) Lower vehicle.
(8) Install shift knob on shift lever.
Fig. 2 Transfer Case Mounting (9) Install nut to hold shifter knob to shift lever.
INSTALLATION (10) Install shifter knob cap.
(1) Mount transfer case on a transmission jack. (11) Verify transfer case operation.
(2) Secure transfer case to jack with chains.
(3) Position transfer case under vehicle. SPEEDOMETER
(4) Align transfer case and transmission shafts
and install transfer case on transmission. REMOVAL
(5) Install and tighten transfer case attaching nuts (1) Raise vehicle.
to 35 N·m (Fig. 2). (2) Disconnect wires from vehicle speed sensor.
(6) Connect vehicle speed sensor wires, and vent (3) Remove adapter clamp and screw (Fig. 4).
hose. (4) Remove speed sensor and speedometer adapter
as an assembly.
11. XJ TRANSMISSION AND TRANSFER CASE 21 - 11
REMOVAL AND INSTALLATION (Continued)
(6) Remove speedometer pinion from adapter.
Replace pinion if chipped, cracked, or worn.
(7) Inspect sensor and adapter O-rings (Fig. 4).
Remove and discard O-rings if worn or damaged.
(8) Inspect terminal pins in speed sensor. Clean
pins with Mopar electrical spray cleaner if dirty or
oxidized. Replace sensor if faulty, or if pins are loose,
severely corroded, or damaged.
INSTALLATION AND INDEXING
(1) Thoroughly clean adapter flange and adapter
mounting surface in housing. Surfaces must be clean
for proper adapter alignment and speedometer oper-
ation.
(2) Install new O-rings on speed sensor and speed-
ometer adapter (Fig. 4), if necessary.
(3) Lubricate sensor and adapter O-rings with
transmission fluid.
(4) Install vehicle speed sensor in speedometer
adapter. Tighten sensor attaching screw to 2-3 N·m
(15-27 in. lbs.) torque.
(5) Install speedometer pinion in adapter.
(6) Count number of teeth on speedometer pinion.
Do this before installing assembly in housing. Then
lubricate pinion teeth with transmission fluid.
(7) Note index numbers on adapter body (Fig. 5).
These numbers will correspond to number of teeth on
pinion.
Fig. 3 Shift Lever (8) Install speedometer assembly in housing.
(9) Rotate adapter until required range numbers
(5) Remove speed sensor retaining screw and are at 6 o-clock position. Be sure range index num-
remove sensor from adapter. bers correspond to number of teeth on pinion gear.
Fig. 4 Speedometer Components
12. 21 - 12 TRANSMISSION AND TRANSFER CASE XJ
REMOVAL AND INSTALLATION (Continued)
(10) Install speedometer adapter clamp and retain- (b) Start seal in bore with light taps from ham-
ing screw. Tighten clamp screw to 10-12 N·m (90-110 mer (Fig. 7). Once seal is started, continue tapping
in. lbs.) torque. seal into bore until installer tool seats against case.
(11) Connect wires to vehicle speed sensor.
(12) Lower vehicle and top off transmission fluid
level if necessary.
Fig. 7 Front Output Seal Installation
REAR RETAINER BUSHING AND SEAL
Fig. 5 Location Of Index Numbers On Speedometer REMOVAL
Adapter (1) Raise vehicle.
FRONT OUTPUT SHAFT SEAL (2) Remove rear propeller shaft. Refer to Group 3,
Differential and Driveline, for proper procedure.
REMOVAL (3) Using a suitable pry tool or slide-hammer
(1) Raise vehicle. mounted screw, remove the rear retainer seal.
(2) Remove front propeller shaft. Refer to Group 3, (4) Using Remover 6957, remove bushing from
Differential and Driveline, for proper procedure. rear retainer (Fig. 8).
(3) Remove front output shaft yoke.
(4) Remove seal from front case with pry tool (Fig.
6).
Fig. 8 Rear Retainer Bushing Removal
INSTALLATION
(1) Clean fluid residue from sealing surface and
Fig. 6 Remove Front Output Shaft Seal inspect for defects.
INSTALLATION (2) Position replacement bushing in rear retainer
(1) Install new front output seal in front case with with fluid port in bushing aligned with slot in
Installer Tool 8143 as follows: retainer.
(a) Place new seal on tool. Garter spring on seal (3) Using Installer 8160, drive bushing into
goes toward interior of case. retainer until installer seats against case (Fig. 9).