Analysis on concrete made from over burned bricksIJARIIT
Concrete is a composite material used for the ground that all considerate designing structure is developed with concrete
in an efforts to find an alternative material in concrete much work has been focused to use brick aggregates in producing normal
strength or even higher strength by far the most common course aggregates used in concrete is obtained from natural rock, but
type of rock suitable for concrete making is not available locally and everywhere. However, there is hardly any literature
producing previous concrete using bricks chips as course aggregates. The research was conducted to study the suitability crushed
over burnt bricks as alternative course aggregates for concrete production. The concrete cube beams and cylinders of M-25, M-
30, and M-35 grade were thrown in this trail explore work and try to analyze different properties of concrete with crushed over
burnt bricks as an alternative material. The physical properties like compressive strength, tensile strength, flexural strength and
workability with alternative material was used with a dosage of 10%, 20% and 30% in concrete with the age of 7, 14, 28 and 50
days of curing. The general properties of fresh and hardened concrete were tried and the outcomes were dissected. Over Burnt
bricks were casted and tested for compressive strength, tensile strength, flexural strength, and workability. The result shows that
the aggregate that concrete derived from Over Burnt bricks aggregate attained lower strength than the regular concrete. More
detailed and elaborated work is recommended with different mix ratio and a different proportion of Over Burnt aggregates for
a better conclusion.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
prepared by Shubham Bhargava and Arnav Tapan from Medi-Caps University, Indore and IIT ,Bombay respectively.
For more info Contact me - bhargavashubham17@gmail.com
Analysis on concrete made from over burned bricksIJARIIT
Concrete is a composite material used for the ground that all considerate designing structure is developed with concrete
in an efforts to find an alternative material in concrete much work has been focused to use brick aggregates in producing normal
strength or even higher strength by far the most common course aggregates used in concrete is obtained from natural rock, but
type of rock suitable for concrete making is not available locally and everywhere. However, there is hardly any literature
producing previous concrete using bricks chips as course aggregates. The research was conducted to study the suitability crushed
over burnt bricks as alternative course aggregates for concrete production. The concrete cube beams and cylinders of M-25, M-
30, and M-35 grade were thrown in this trail explore work and try to analyze different properties of concrete with crushed over
burnt bricks as an alternative material. The physical properties like compressive strength, tensile strength, flexural strength and
workability with alternative material was used with a dosage of 10%, 20% and 30% in concrete with the age of 7, 14, 28 and 50
days of curing. The general properties of fresh and hardened concrete were tried and the outcomes were dissected. Over Burnt
bricks were casted and tested for compressive strength, tensile strength, flexural strength, and workability. The result shows that
the aggregate that concrete derived from Over Burnt bricks aggregate attained lower strength than the regular concrete. More
detailed and elaborated work is recommended with different mix ratio and a different proportion of Over Burnt aggregates for
a better conclusion.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
prepared by Shubham Bhargava and Arnav Tapan from Medi-Caps University, Indore and IIT ,Bombay respectively.
For more info Contact me - bhargavashubham17@gmail.com
In this presentation i have gone through about various prospects and challenges that have been faced at the time of installation,its types,method of installation &its application.
IRC:75-2015 GUIDELINES FOR THE DESIGN OF HIGH EMBANKMENTSBrahmaV1
The guidelines specifically indicates “high embankments” as those exceeding 6m in height, embankments of any height less than 6 m founded on soft/compressible and/or loose strata are also considered as high embankments here. Design methodologies discussed herein apply for such cases also.
High embankments within the road networks are mostly joining to various types of structures such as bridges, vehicular/ pedestrian underpasses, etc. apart from the requirement of
geometric alignment due to right-of-way constraints, subsoil issues, etc.
Deep foundation work in urban areas are great task to execute , and need to do engineering innovation to accomplish them . Secant pile construction is one of the way to execute .
Erbil Polytechnic University
Erbil Engineering College
Highway Engineering Techniques Department
“Report”
“Types Of Rigid Pavements”
By
“hoshang khalid”
“Stage 1“
“engineering material / Lecturer,
“ M.sawash”
Date of Submission: 22 June 2020
PPT that I prepared for Washington conference May 2009 (closed civil law countries) / Client: the National Council of Judicial Administrators and Receiver-Liquidators (Paris, FRANCE)
They had asked for a bit of humour so this was my best attempt.
This is a team presentation, we presented, of our analysis on the "Channel Tunnel" (Euro tunnel) project, as our term project for the course "International Project Management & Professional Responsibility" of "Project Management" program.
In this presentation i have gone through about various prospects and challenges that have been faced at the time of installation,its types,method of installation &its application.
IRC:75-2015 GUIDELINES FOR THE DESIGN OF HIGH EMBANKMENTSBrahmaV1
The guidelines specifically indicates “high embankments” as those exceeding 6m in height, embankments of any height less than 6 m founded on soft/compressible and/or loose strata are also considered as high embankments here. Design methodologies discussed herein apply for such cases also.
High embankments within the road networks are mostly joining to various types of structures such as bridges, vehicular/ pedestrian underpasses, etc. apart from the requirement of
geometric alignment due to right-of-way constraints, subsoil issues, etc.
Deep foundation work in urban areas are great task to execute , and need to do engineering innovation to accomplish them . Secant pile construction is one of the way to execute .
Erbil Polytechnic University
Erbil Engineering College
Highway Engineering Techniques Department
“Report”
“Types Of Rigid Pavements”
By
“hoshang khalid”
“Stage 1“
“engineering material / Lecturer,
“ M.sawash”
Date of Submission: 22 June 2020
PPT that I prepared for Washington conference May 2009 (closed civil law countries) / Client: the National Council of Judicial Administrators and Receiver-Liquidators (Paris, FRANCE)
They had asked for a bit of humour so this was my best attempt.
This is a team presentation, we presented, of our analysis on the "Channel Tunnel" (Euro tunnel) project, as our term project for the course "International Project Management & Professional Responsibility" of "Project Management" program.
Shortcreting has proved to be the best method for construction of curved surfaces. Domes are now much easier to construct with the advent of shotcrete technology. Tunnel linings are also becoming easy with this technology. Not only are these but there a wide range of applications where this technology has been a leading one. This technical paper includes the concept of shotcrete and how it differs from conventional concrete. It also enumerates the different types of process involved in shotcreting i.e. dry mix process and wet mix process. Advantages of shotcrete and its applications in various fields like tunneling, canals, buildings etc. are specified in detail. This paper presents an overview of shotcreting technology along with its applications.
DEFINITION OF SHOTCRETE:-
Shotcrete is a mortar or high performance concrete conveyed through a hose and pneumatically projected at high velocity onto a backing surface. It is the force of this spraying action that leads to compaction of the concrete or mortar which then forms layers of concrete to the required thickness. Shotcreting has been an acceptable way of placing cementitious material in a variety of applications.
Usually patented polypropylene fibers are included in the shotcrete which increases the cohesive nature of the shotcrete through mechanically binding the cementitious materials together. This mechanism reduces the rebound waste that occurs through the shotcreting process and these fibers also resist plastic shrinkage and cracking through their ability to enhance the early stage tensile strength of concrete.
Shotcrete also gives better surface finishes and reduces surface tearing on non- linear sections. Cementitious material containing the poly propylene fibers resist cycles of freezing and thawing and also reduces the chances of water and chemical penetrations.
This presentation provides a keen insight into the issues that arose during the construction of the Channel Tunnel (Chunnel), that forms a 50.5 km rail lifeline between France and UK.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2. The Tunnel sous la Manche (Channel
Tunnel) is a railway tunnel, open on 6 May
1994, which crosses the English Channel,
linking France with the United Kingdom
3. HISTORY
It is an important international transport infrastructure. Their
journey can be done either by car (by the "Shuttle") or train
Eurostar and takes about 35 minutes beween Coquelles (Calais
City) in France and Folkestone in the UK.
7. They started digging the tunnel in 1988. They starts at
both ends , in England and in France. It was an
ennormus tunnel , 13.000 persons work it on the tunnel.
8. THE END OF THE PROJECT
The project was made of:
Marco Tabernero
Carla Martín
Pablo Cuezva
Fabio Sousa
