Accelerating the Development of Aluminium Lightweighting SolutionsConstellium
Accelerating the Development of Aluminium Lightweighting Solutions for Body-In-White and Crash Management Systems.
Need for innovative aluminium lightweight solutions - Market growth of aluminium sheet & extrusion - Driving innovation in the Constellium University Technology Center
"Accelerating the development of lightweight aluminium solutions for automotive structures and Crash Management Systems” takes a closer look at HSA6, Constellium’s latest high-strength alloy. It also highlights capabilities of the new Constellium University Technology Center at Brunel University London, a dedicated center of excellence for the design, development and full-scale rapid prototyping of aluminium alloys, extrusions and automotive structural components.
Presented by Martin Jarrett, Director, Operational Excellence and Technology, November 30 at ALUMINIUM 2016.
Latest aluminium innovations to meet passenger vehicle lightweight needsConstellium
“Formed extrusions & high strength sheets: latest aluminium innovations to meet passenger vehicle lightweight needs.” Presented at Automotive Circle’s Insight Edition @ Ford USA on September 24, 2015.
Constellium high strength crash management systems 20150609Constellium
Constellium presented its new generation of high-strength Crash Management Systems at Automotive Engineering Expo 2015. Lionel Chapis, Managing Director of Automotive Structures at Constellium, and Frank Gensty, Director Engineering, Automotive Structures and Industry at Constellium, highlighted how the latest generation of aluminium Crash Management Systems is setting new industry standards.
Few players in our industry invest in a real R&D center at all, and at a significant and critical size. We continue to believe Al is the ideal solution for many markets.
To remain a material of choice, more innovation around Al is required, both incrementally and with breakthroughs.
C-TEC is the engine to deliver on this innovation.
Accelerating the Development of Aluminium Lightweighting SolutionsConstellium
Accelerating the Development of Aluminium Lightweighting Solutions for Body-In-White and Crash Management Systems.
Need for innovative aluminium lightweight solutions - Market growth of aluminium sheet & extrusion - Driving innovation in the Constellium University Technology Center
"Accelerating the development of lightweight aluminium solutions for automotive structures and Crash Management Systems” takes a closer look at HSA6, Constellium’s latest high-strength alloy. It also highlights capabilities of the new Constellium University Technology Center at Brunel University London, a dedicated center of excellence for the design, development and full-scale rapid prototyping of aluminium alloys, extrusions and automotive structural components.
Presented by Martin Jarrett, Director, Operational Excellence and Technology, November 30 at ALUMINIUM 2016.
Latest aluminium innovations to meet passenger vehicle lightweight needsConstellium
“Formed extrusions & high strength sheets: latest aluminium innovations to meet passenger vehicle lightweight needs.” Presented at Automotive Circle’s Insight Edition @ Ford USA on September 24, 2015.
Constellium high strength crash management systems 20150609Constellium
Constellium presented its new generation of high-strength Crash Management Systems at Automotive Engineering Expo 2015. Lionel Chapis, Managing Director of Automotive Structures at Constellium, and Frank Gensty, Director Engineering, Automotive Structures and Industry at Constellium, highlighted how the latest generation of aluminium Crash Management Systems is setting new industry standards.
Few players in our industry invest in a real R&D center at all, and at a significant and critical size. We continue to believe Al is the ideal solution for many markets.
To remain a material of choice, more innovation around Al is required, both incrementally and with breakthroughs.
C-TEC is the engine to deliver on this innovation.
Peter Zimm - MRO WORKSHOP - SPOTLIGHT: Additive manufacturing (3D printing) is expected to have a profound impact on global supply chains, including in the aviation industry. What does 3D printing mean for the future of manufacturers and MROs?
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM , presented at SAMPE-Europe Conference 2017,
Stuttgart, November 15th 2017
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
Peter Zimm - MRO WORKSHOP - SPOTLIGHT: Additive manufacturing (3D printing) is expected to have a profound impact on global supply chains, including in the aviation industry. What does 3D printing mean for the future of manufacturers and MROs?
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM , presented at SAMPE-Europe Conference 2017,
Stuttgart, November 15th 2017
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
AccuThermo AW 820V Vacuum Rapid Thermal Anneal EquipmentPeter Chen
The AccuThermo AW820V is a stand alone Vacuum RTP (Rapid Thermal Processing) system, which uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 900 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition and Metal Film Metrology high-tech semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. We endeavor to be a leader in our product lines.
We focus on extending product lifecycle, providing solutions, and engineering enhancements to many production proven semiconductor process equipment most directly related to III-V processing. These semiconductor equipment have been used in production and R&D since the 1990′s. They have proven processes and research. Allwin21 Corp. customizes these systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system, and new critical components. This is to achieve the goal of giving our customers a production edge, with right cost, and without having to worry about obsolete parts.
S-8800 lead-free reflow oven is Southern Machinery‘s mature product after many years of market testing.S-8800 Reflow oven has maintained a larger share of the market for many years.
Its unparalleled heating performance and temperature control system meets the requirements of various welding processes, It is Southern Machinery ’s crystallization of years technical research and development. S-8800 Lead-free reflow is high-end reflow products committed to keeping up with market demand to enhance customers competitiveness.
Its new design concept fully meets the needs of increasingly diverse processes, and considering the future direction of the industry, entirely suitable for communications, automotive electronics, home appliances, computers and other consumer electronic products .
PCR
PCR is a method widely used in Molecular biology to make many copies of a specific DNA segment.
Using PCR it is possible to generate thousand millions of copies of a particular section of DNA from very small amount of DNA.
PCR was originally developed in 1983 by the American Biochemists Kary Mullis. He was awarded the Nobel Prize in Chemistry in 1993 for his pioneering work.
Catálogo sobre a clarificadora da SPX.
SPX Seital hermetic separators remove residual yeast and other non-soluble solids quickly and efficiently without impacting the flavor and aroma of the beer.
Current and evolving customer needs always come first at Seital Separation Technology. Via close collaboration with our customers, an innovative approach and cutting-edge R&D we design, evelop and deliver best-in-class separation solutions for the brewing industry that deliver
superior quality and efficiency at the lowest possible cost.
In this presentation given during Chillventa 2018, Stefano Soggia introduces DC Cella Split, our DC inverter control solution for cold rooms that merges all the benefits of breaking-through solutions like UltraCella, Hecu and EVDice, and provides up to 25% energy savings compared to equivalent on/off technology.
Similar to ET'16 - How to Benefit from Isothermal Extrusion (20)
Constellium supports transportation manufacturers beyond a traditional supplier role, producing value-added products and solutions and managing complex supply chains.
Aluminium is the preferred material for all kinds of packaging. It is flexible, lightweight, keeps beverages cold, can be densely stacked and is easy to recycle. At Constellium, our high-value products range from screw caps to perfume bottles and we are a major recycler in the market
Our applications cover a wide range of products, from building facades to industrial robots. With 100 years in the industry field, we combine experience with world-class manufacturing capabilities to offer our customers the right solutions for their individual requirements.
Advanced aluminium for better protection and survivability
Constellium forms partnerships with global defense companies
to develop next-generation solutions.
Constellium is a global leader designing and manufacturing innovative and high value-added aluminium products and solutions for a broad range of applications dedicated primarily to aerospace, automotive and packaging markets.
Corrosion proceeding review (2016 international congress and exhibition on al...Constellium
Development of an electrochemical depth profiling method to optimize the corrosion protection on aluminium cladded sheets for automotive heat exchangers
Constellium - The life-cycle of aluminiumConstellium
Aluminium is valuable at every stage of its life-cycle and can be endlessly recycled without loss of properties. “Going full circle – The life-cycle of aluminium” is the title of the new publication where Constellium presents three essentials to make infinite recycling a reality.
Constellium believes that players, within and outside the aluminium industry, through better collaboration can foster good practices to ensure the highest possible value is delivered at every step of the value chain.
Have you ever wondered how search works while visiting an e-commerce site, internal website, or searching through other types of online resources? Look no further than this informative session on the ways that taxonomies help end-users navigate the internet! Hear from taxonomists and other information professionals who have first-hand experience creating and working with taxonomies that aid in navigation, search, and discovery across a range of disciplines.
Sharpen existing tools or get a new toolbox? Contemporary cluster initiatives...Orkestra
UIIN Conference, Madrid, 27-29 May 2024
James Wilson, Orkestra and Deusto Business School
Emily Wise, Lund University
Madeline Smith, The Glasgow School of Art
This presentation, created by Syed Faiz ul Hassan, explores the profound influence of media on public perception and behavior. It delves into the evolution of media from oral traditions to modern digital and social media platforms. Key topics include the role of media in information propagation, socialization, crisis awareness, globalization, and education. The presentation also examines media influence through agenda setting, propaganda, and manipulative techniques used by advertisers and marketers. Furthermore, it highlights the impact of surveillance enabled by media technologies on personal behavior and preferences. Through this comprehensive overview, the presentation aims to shed light on how media shapes collective consciousness and public opinion.
0x01 - Newton's Third Law: Static vs. Dynamic AbusersOWASP Beja
f you offer a service on the web, odds are that someone will abuse it. Be it an API, a SaaS, a PaaS, or even a static website, someone somewhere will try to figure out a way to use it to their own needs. In this talk we'll compare measures that are effective against static attackers and how to battle a dynamic attacker who adapts to your counter-measures.
About the Speaker
===============
Diogo Sousa, Engineering Manager @ Canonical
An opinionated individual with an interest in cryptography and its intersection with secure software development.
This presentation by Morris Kleiner (University of Minnesota), was made during the discussion “Competition and Regulation in Professions and Occupations” held at the Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found out at oe.cd/crps.
This presentation was uploaded with the author’s consent.
Acorn Recovery: Restore IT infra within minutesIP ServerOne
Introducing Acorn Recovery as a Service, a simple, fast, and secure managed disaster recovery (DRaaS) by IP ServerOne. A DR solution that helps restore your IT infra within minutes.
Doctoral Symposium at the 17th IEEE International Conference on Software Test...
ET'16 - How to Benefit from Isothermal Extrusion
1. ELEVENTH INTERNATIONAL ALUMINUM EXTRUSION TECHNOLOGY
SEMINAR AND EXPOSITION
How to Benefit from
Isothermal Extrusion
Alexander Klaus
2. Constellium: a leader in innovative aluminium solutions
for the automotive, aerospace & packaging industries
2
Over 10,000 full-time employees
€5.2 billion in sales
22 manufacturing sites
C-TEC, our world-class Technology Center
Headquartered in Amsterdam, The Netherlands.
Corporate offices in Paris, France, Zurich, Switzerland and
New York, USA
2015 key figures
3. A global network of 22 facilities
3
An introduction to Constellium 2016
5. Challenges
Reliability Stable process conditions,
controlled process
Productivity Ram speed, quality
Documentation Production data
Using temperature process control
Achieve constant profile exit temperature
Adapt ram speed and billet temperature /
taper to improve productivity
Collect detailed process data
7. Die limit diagram + process control problem
Billet temperature
Ram
speed
Set exit temp
1
2
±20°C
±10%
surface
defects
max.
pressure
mech.
prop.
Process control
does not detect
Dimensional defects
Mech. properties
Surface defects
(only exit
temperature)
Process control
increases speed
Is that feasible?
9. Speed related quality problems
Surface defects
Linked to exit temperature
Not linked to exit temperature
Dimensional defects
Speed-sensitive dies
Quench distortion
Mechanical defects
High quench exit temperature
Metallurgical defects
Peripheral coarse grain
11. Quality gates during extrusion and
recipe management strategy
Quality gates
1. QGate – at the press
Outer surface
Simple dimensions
Quench settings
2. QGate – at the cold saw
Inner surface
Full geometry
3. QGate – at the quality lab
Mechanical properties
Metallurgical properties
Recipe management strategy
1. “Free Run”
Use TPC to increase speed
2. “Delayed Run”
Use TPC to current recipe
1 billet trial within order (higher speed)
Check at Q2
Use TPC to increase recipe
/ repeat / feed back
3. “Last Billet Run”
Use TPC to current recipe
1 billet trial at end of order
Check at Q3 / update recipe / repeat
product quality
can be fully
assessed
12. Conclusion
Reliable and highly productive environment required
Temperature process control does not prevent quality problems –
it even causes new ones
Used correctly, process control enables increased repeatability
Recipe management depending on quality gates
Free run
Delayed run
Last billet run