Entering or Exiting the Work Area
•Download as PPT, PDF•
0 likes•226 views
The document outlines procedures for entering and exiting a work area, including a clean room and equipment room. To enter, workers must remove street clothes, put on protective gear like a swimsuit, overalls and foot coverings, and properly don a respirator. They then proceed to the equipment room to collect tools before entering the work area. To exit, workers remove contaminated protective clothing and gear in the equipment room and shower room, thoroughly washing their bodies and respirators before redressing and exiting in clean clothes.
Report
Share
Report
Share
Recommended
Thesis Presentation 2007
To review & update the gowning procedures in The Aseptic Unit in the Adelaide & Meath Hospital Inc. The National Childrens\' Hospital, Tallaght.
Cleanroom rules and practices
The document outlines cleanroom rules and practices that personnel should follow to minimize contamination. It states that cleanroom employees should be neat, clean and in good health. They must also have a minimum education level and understand aseptic techniques. Strict rules are outlined, including washing hands before entry, slow movement, limiting talking and activities that increase particles, and not bringing in unauthorized items. Personnel are instructed to avoid interrupting airflow, touching products directly and exposing them unnecessarily. Failure to follow the rules could lead to increased contamination from people, who are the main source of particles in cleanrooms.
Confined Space Presentation University of Technology,Mauritius
Presentation for Industrial Toxicology Module
Confined Space Presentation University of Technology,Mauritius
Message me if u want me to send u the power point
Motor vehicle Mechanical repair workshop Risk assessment, safety engineering ...
The document describes a risk assessment conducted at a motor vehicle mechanical repair workshop employing 12 mechanics. Primary and secondary data collection methods were used to identify hazards. Key hazards included noise, vibration, electricity, chemicals and improper lifting. Recommendations provided included use of personal protective equipment, installation of safety controls, training workers, and addressing issues like dermatitis and exposure to hazardous substances. The risk assessment found various medium and high-risk issues that needed to be addressed to improve workplace safety.
Resuming office activities amid covid 19
This SoP is being developed for GE3S global team to resume office activities amid COVID-19. These are just precautionary measures to carry out day to day activities in safe manner.
Clean Room_Presentation
The document provides an overview of clean rooms, including their purpose, key components, classification standards, and importance in the pharmaceutical industry. A clean room is a controlled environment designed and maintained to reduce contamination through strict control of particulate matter and other pollutants. Clean rooms are classified based on standards like ISO and use HEPA filters to purify air circulation. Proper clean room certification and validation is important for ensuring safety and quality in pharmaceutical manufacturing as required by cGMP guidelines.
Safety webinar with mark friend
This is a webinar presented April 14, 2015 by Embry-Riddle Aeronautical University and featuring noted safety expert Dr. Mark Friend. Dr. Friend looks at the topic, "How to make safety work in your company."
Barrier technique personal protective equipment [compatibility mode]
Infection Control Guidelines for appropriate use of personal protective equipment Barrier technique personal protective equipment
Dr. Nahla Abdel Kader.MD, PhD. Infection Control Consultant, MOH Infection Control Surveyor, CBAHI Infection Control Director,KKH.
Recommended
Thesis Presentation 2007
To review & update the gowning procedures in The Aseptic Unit in the Adelaide & Meath Hospital Inc. The National Childrens\' Hospital, Tallaght.
Cleanroom rules and practices
The document outlines cleanroom rules and practices that personnel should follow to minimize contamination. It states that cleanroom employees should be neat, clean and in good health. They must also have a minimum education level and understand aseptic techniques. Strict rules are outlined, including washing hands before entry, slow movement, limiting talking and activities that increase particles, and not bringing in unauthorized items. Personnel are instructed to avoid interrupting airflow, touching products directly and exposing them unnecessarily. Failure to follow the rules could lead to increased contamination from people, who are the main source of particles in cleanrooms.
Confined Space Presentation University of Technology,Mauritius
Presentation for Industrial Toxicology Module
Confined Space Presentation University of Technology,Mauritius
Message me if u want me to send u the power point
Motor vehicle Mechanical repair workshop Risk assessment, safety engineering ...
The document describes a risk assessment conducted at a motor vehicle mechanical repair workshop employing 12 mechanics. Primary and secondary data collection methods were used to identify hazards. Key hazards included noise, vibration, electricity, chemicals and improper lifting. Recommendations provided included use of personal protective equipment, installation of safety controls, training workers, and addressing issues like dermatitis and exposure to hazardous substances. The risk assessment found various medium and high-risk issues that needed to be addressed to improve workplace safety.
Resuming office activities amid covid 19
This SoP is being developed for GE3S global team to resume office activities amid COVID-19. These are just precautionary measures to carry out day to day activities in safe manner.
Clean Room_Presentation
The document provides an overview of clean rooms, including their purpose, key components, classification standards, and importance in the pharmaceutical industry. A clean room is a controlled environment designed and maintained to reduce contamination through strict control of particulate matter and other pollutants. Clean rooms are classified based on standards like ISO and use HEPA filters to purify air circulation. Proper clean room certification and validation is important for ensuring safety and quality in pharmaceutical manufacturing as required by cGMP guidelines.
Safety webinar with mark friend
This is a webinar presented April 14, 2015 by Embry-Riddle Aeronautical University and featuring noted safety expert Dr. Mark Friend. Dr. Friend looks at the topic, "How to make safety work in your company."
Barrier technique personal protective equipment [compatibility mode]
Infection Control Guidelines for appropriate use of personal protective equipment Barrier technique personal protective equipment
Dr. Nahla Abdel Kader.MD, PhD. Infection Control Consultant, MOH Infection Control Surveyor, CBAHI Infection Control Director,KKH.
GOWNING.pdf
Gowning refers to wearing special garments to enter controlled environments and avoid contamination. It aims to protect workers from chemicals and products from contamination. Gowning can cover the head, beard, face, torso, legs, feet and hands. Proper preparation includes showering, shaving, brushing teeth, selecting non-shedding clothing and removing jewelry. The gowning process involves washing hands, changing into factory gowns, inspecting oneself, and following personnel routes. Degowning involves removing disposable items and reusable garments, washing hands and changing back into street clothes.
Personnel Hygiene and Gowning Degowning Procedure.pptx
This document outlines personnel hygiene and gowning/de-gowning procedures for pharmaceutical manufacturing. It discusses the importance of sanitation, hygiene, and avoiding cross-contamination. Key points include health examinations and training for personnel, protective clothing and hair coverings, separate changing areas, and procedures for safely donning and doffing gowns to prevent contamination. The goal is to maintain sanitary conditions and protect both personnel and products.
Hygeene & Sanitation.pptx
Hygiene and sanitation are important for pharmaceutical manufacturing. Personnel must practice good hygiene including health checks, protective clothing, and handwashing. Facilities must be designed to prevent cross-contamination through layout, airflow, and cleaning validations. Waste must be disposed of properly. Strict hygiene protocols are necessary to maintain quality throughout the manufacturing process.
Module 4 primary contaiment and other hazard
The document discusses primary containment and other biological hazards. It outlines a hierarchy of controls to prevent exposure to biological hazards, including engineering controls, administrative controls, and personal protective equipment (PPE). Primary containment equipment like biosafety cabinets (BSCs) and centrifuges contain hazards at the source. Secondary containment provides barriers around primary containment through facilities and room design. Tertiary containment establishes barriers beyond containment laboratories. PPE like gloves, gowns, and respirators are used to protect workers. Proper use and decontamination of equipment minimizes exposure risks from biological hazards in laboratories.
Behaviour_and_Practices_in_Cleanrooms.pptx
This ppt explains in detail about the Behavior and Practices to be followed in Clean-rooms & Clean zones of an Orthopaedic Medical Device Mfg organization.
It explains what all the international standards to be followed, how the particle emission happens, how it can be avoided inside a cleanroom or Clean-zone etc. How the gowning or cleanroom garment should be worn, what activities should not be done while inside a cleanroom, what can be done etc.
It also mentions the effect of the implanted patient, if the sterile packaging was done in a contaminated cleanroom. All precautions to overcome the deficiencies have been explained.
PPE USE (1).pptx
This document provides information on the use of personal protective equipment (PPE) for healthcare workers. It defines PPE and describes various types including gloves, gowns, masks, boots and eye protection. The document explains that PPE helps prevent the spread of microorganisms from person to person or surfaces to people. It provides details on correctly donning and doffing PPE to prevent contamination, including the order of putting on items and safely removing them. Proper use and decontamination of PPE is emphasized to protect healthcare workers from infection.
Guidance for the selection and use of personal
This document provides guidance on the selection and use of personal protective equipment (PPE) in healthcare settings. It defines PPE and outlines regulations from OSHA and recommendations from CDC on appropriate PPE use. The document describes different types of PPE including gloves, gowns, masks, respirators, goggles, and face shields. It provides details on proper donning, use, and removal of PPE to prevent the spread of infectious materials and outlines PPE recommendations for standard and expanded isolation precautions. The overarching goal is to improve personnel safety through appropriate PPE use in healthcare environments.
(CDC) PROPER DONNING AND DOFFING OF.pptx
This document provides guidance on proper donning and doffing of personal protective equipment (PPE). It describes the types of PPE used in healthcare settings like gloves, gowns, masks, respirators and goggles. It outlines the key steps to donning PPE like gown first then mask/respirator, goggles and gloves. For doffing, the sequence is removing gloves, face shield/goggles, gown and mask/respirator. PPE should be removed carefully to avoid contamination and hand hygiene performed after doffing PPE.
Safety First
This document provides safety guidelines for students conducting laboratory work. It outlines proper procedures for gas, eye, fire, glassware, electrical, waste, heating, chemical, hand and clothing safety. Specific guidelines include wearing safety goggles, disposing of waste properly, turning off flames when not in use, washing hands after experiments, and asking the teacher's permission before starting any investigations. The document emphasizes being careful in the laboratory and informing the teacher immediately of any accidents.
Lab safety 19062019.ppt
This document outlines general laboratory safety guidelines. It discusses why laboratory safety is important to protect workers, visitors, and the work. Laboratory hazards include fire, sharps, spills, pressure equipment, chemicals, and biological and radiation hazards. The key aspects of laboratory safety are to identify hazards, evaluate risks through assessments, and control risks following a hierarchy of controls. Control measures include elimination, substitution, engineering controls, administrative controls, and personal protective equipment. Proper hygiene, waste disposal, chemical storage, emergency procedures, and incident reporting are also covered.
Pp eslides6 29-04[1]
The document provides guidance on selecting and using personal protective equipment (PPE) in healthcare settings. It discusses the goals and objectives of a PPE program which is to improve safety through appropriate PPE use. The key types of PPE like gloves, gowns, masks and respirators are described. Factors that influence PPE selection include the type of exposure, isolation precautions used, and task requirements. Guidelines are provided on properly donning, using, and removing different types of PPE to prevent the spread of infectious materials.
Safety.pptx
This document provides guidance on various workplace safety topics. It outlines employee duties to take reasonable care for health and safety, cooperate with employers, and handle machinery properly. It also provides rules for reporting accidents and near misses. Specific safety topics addressed include electrical safety, machinery guards, personal protective equipment, emergency response plans, fire prevention, compressed gas cylinders, hand and power tools, preventative heat illness, portable ladders, first aid, chemical safety, knife safety, forklift safety, and crane/hoist safety. Proper procedures are outlined for each area to minimize risks and protect employee health and safety.
Basic Cleanroom Protocol
The document provides an overview of cleanroom and cleanzone protocols. It discusses cleanroom basics like definitions, components, construction stages, apparel requirements and other protocols. The key aspects covered are preventing dust entry, minimizing dust generation, removing dust, and not accumulating or scattering dust. Cleaning protocols like daily and regular cleaning are also summarized. The document aims to educate people on cleanroom requirements and practices to maintain cleanliness.
Lab safety
The document discusses important lab safety practices. Students should wear closed-toe shoes, long pants, an apron, and safety goggles when conducting experiments. Safe lab practices include properly disposing of waste, not eating or playing with chemicals, and always wearing gloves when handling substances. In the event of an accident, people should be alerted and protective equipment worn while containing and neutralizing spills before evacuating. At the end of the lab period, students should clean work areas and properly dispose of waste.
Lec 2 biosafety barriers in labs
Biosafety barriers in labs include personal protective equipment (PPE) like gloves, masks, and gowns as primary barriers. Biological safety cabinets (BSCs) are also important primary barriers that control hazards at their source. Secondary barriers include the laboratory structure like sealed perimeters, HEPA filters in exhaust systems, and specialized ventilation. Proper facility design and worker training are also crucial for effective biocontainment.
Lec biosafety barriers in labs ppe
Biosafety barriers in labs include personal protective equipment (PPE) like gloves, masks, and gowns as primary barriers. Biological safety cabinets (BSCs) are also primary barriers that control hazards at their source. Secondary barriers include the laboratory structure, such as sealed perimeters, HEPA filters on exhausts, sinks for handwashing, and sealed containment areas. Proper facility design and construction help provide increasing levels of protection depending on the biological agent risk level.
Personal Hygiene for pharma industry-Dr. A. Amsavel
Personal hygiene
Source of Contamination and control
GMP Requirement /Guideline
Procedures & Records
Protective Clothing & gowning
Health Examination
Hand wash – How and when
Training & Practice
by Dr. A. Amsavel
Hasl 1992dnlfile 1
This document provides guidance to protect responders from hazards during hurricane relief efforts. It describes 14 main hazards including unstable structures, noise, dust, heat stress, confined spaces, chemicals, electricity, carbon monoxide, injuries, heavy equipment, food/water-borne diseases, animal/insect-borne diseases, and traumatic stress. For each hazard, it lists protective measures like using proper protective equipment, monitoring conditions, and understanding symptoms of overexposure. It also provides tips for managing stress and maintaining health and safety.
Standard Grade Administration - Safe Working Practices and Procedures
Potential office hazards include slipping, falling, lifting injuries, and electrical hazards. Employers must provide a safe working environment under the Health and Safety at Work Act 1974 including hazard control, protective equipment, first aid, and accident recording. The Display Screen Equipment Regulations require ergonomic workstations, breaks, and eye exams. RIDDOR requires reporting of deaths, injuries keeping employees off work for more than 3 days, and dangerous occurrences to the HSE within set timeframes.
Labsafety
This document provides an overview of general laboratory safety. It discusses why safe working is important to protect oneself and others. UK law requires performing risk assessments and using control measures to minimize risks. Personal protective equipment and good hygiene practices are emphasized. Hazards like fires, broken glass, spills and electrical equipment are addressed. Proper waste disposal and only working with training is stressed.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
More Related Content
Similar to Entering or Exiting the Work Area
GOWNING.pdf
Gowning refers to wearing special garments to enter controlled environments and avoid contamination. It aims to protect workers from chemicals and products from contamination. Gowning can cover the head, beard, face, torso, legs, feet and hands. Proper preparation includes showering, shaving, brushing teeth, selecting non-shedding clothing and removing jewelry. The gowning process involves washing hands, changing into factory gowns, inspecting oneself, and following personnel routes. Degowning involves removing disposable items and reusable garments, washing hands and changing back into street clothes.
Personnel Hygiene and Gowning Degowning Procedure.pptx
This document outlines personnel hygiene and gowning/de-gowning procedures for pharmaceutical manufacturing. It discusses the importance of sanitation, hygiene, and avoiding cross-contamination. Key points include health examinations and training for personnel, protective clothing and hair coverings, separate changing areas, and procedures for safely donning and doffing gowns to prevent contamination. The goal is to maintain sanitary conditions and protect both personnel and products.
Hygeene & Sanitation.pptx
Hygiene and sanitation are important for pharmaceutical manufacturing. Personnel must practice good hygiene including health checks, protective clothing, and handwashing. Facilities must be designed to prevent cross-contamination through layout, airflow, and cleaning validations. Waste must be disposed of properly. Strict hygiene protocols are necessary to maintain quality throughout the manufacturing process.
Module 4 primary contaiment and other hazard
The document discusses primary containment and other biological hazards. It outlines a hierarchy of controls to prevent exposure to biological hazards, including engineering controls, administrative controls, and personal protective equipment (PPE). Primary containment equipment like biosafety cabinets (BSCs) and centrifuges contain hazards at the source. Secondary containment provides barriers around primary containment through facilities and room design. Tertiary containment establishes barriers beyond containment laboratories. PPE like gloves, gowns, and respirators are used to protect workers. Proper use and decontamination of equipment minimizes exposure risks from biological hazards in laboratories.
Behaviour_and_Practices_in_Cleanrooms.pptx
This ppt explains in detail about the Behavior and Practices to be followed in Clean-rooms & Clean zones of an Orthopaedic Medical Device Mfg organization.
It explains what all the international standards to be followed, how the particle emission happens, how it can be avoided inside a cleanroom or Clean-zone etc. How the gowning or cleanroom garment should be worn, what activities should not be done while inside a cleanroom, what can be done etc.
It also mentions the effect of the implanted patient, if the sterile packaging was done in a contaminated cleanroom. All precautions to overcome the deficiencies have been explained.
PPE USE (1).pptx
This document provides information on the use of personal protective equipment (PPE) for healthcare workers. It defines PPE and describes various types including gloves, gowns, masks, boots and eye protection. The document explains that PPE helps prevent the spread of microorganisms from person to person or surfaces to people. It provides details on correctly donning and doffing PPE to prevent contamination, including the order of putting on items and safely removing them. Proper use and decontamination of PPE is emphasized to protect healthcare workers from infection.
Guidance for the selection and use of personal
This document provides guidance on the selection and use of personal protective equipment (PPE) in healthcare settings. It defines PPE and outlines regulations from OSHA and recommendations from CDC on appropriate PPE use. The document describes different types of PPE including gloves, gowns, masks, respirators, goggles, and face shields. It provides details on proper donning, use, and removal of PPE to prevent the spread of infectious materials and outlines PPE recommendations for standard and expanded isolation precautions. The overarching goal is to improve personnel safety through appropriate PPE use in healthcare environments.
(CDC) PROPER DONNING AND DOFFING OF.pptx
This document provides guidance on proper donning and doffing of personal protective equipment (PPE). It describes the types of PPE used in healthcare settings like gloves, gowns, masks, respirators and goggles. It outlines the key steps to donning PPE like gown first then mask/respirator, goggles and gloves. For doffing, the sequence is removing gloves, face shield/goggles, gown and mask/respirator. PPE should be removed carefully to avoid contamination and hand hygiene performed after doffing PPE.
Safety First
This document provides safety guidelines for students conducting laboratory work. It outlines proper procedures for gas, eye, fire, glassware, electrical, waste, heating, chemical, hand and clothing safety. Specific guidelines include wearing safety goggles, disposing of waste properly, turning off flames when not in use, washing hands after experiments, and asking the teacher's permission before starting any investigations. The document emphasizes being careful in the laboratory and informing the teacher immediately of any accidents.
Lab safety 19062019.ppt
This document outlines general laboratory safety guidelines. It discusses why laboratory safety is important to protect workers, visitors, and the work. Laboratory hazards include fire, sharps, spills, pressure equipment, chemicals, and biological and radiation hazards. The key aspects of laboratory safety are to identify hazards, evaluate risks through assessments, and control risks following a hierarchy of controls. Control measures include elimination, substitution, engineering controls, administrative controls, and personal protective equipment. Proper hygiene, waste disposal, chemical storage, emergency procedures, and incident reporting are also covered.
Pp eslides6 29-04[1]
The document provides guidance on selecting and using personal protective equipment (PPE) in healthcare settings. It discusses the goals and objectives of a PPE program which is to improve safety through appropriate PPE use. The key types of PPE like gloves, gowns, masks and respirators are described. Factors that influence PPE selection include the type of exposure, isolation precautions used, and task requirements. Guidelines are provided on properly donning, using, and removing different types of PPE to prevent the spread of infectious materials.
Safety.pptx
This document provides guidance on various workplace safety topics. It outlines employee duties to take reasonable care for health and safety, cooperate with employers, and handle machinery properly. It also provides rules for reporting accidents and near misses. Specific safety topics addressed include electrical safety, machinery guards, personal protective equipment, emergency response plans, fire prevention, compressed gas cylinders, hand and power tools, preventative heat illness, portable ladders, first aid, chemical safety, knife safety, forklift safety, and crane/hoist safety. Proper procedures are outlined for each area to minimize risks and protect employee health and safety.
Basic Cleanroom Protocol
The document provides an overview of cleanroom and cleanzone protocols. It discusses cleanroom basics like definitions, components, construction stages, apparel requirements and other protocols. The key aspects covered are preventing dust entry, minimizing dust generation, removing dust, and not accumulating or scattering dust. Cleaning protocols like daily and regular cleaning are also summarized. The document aims to educate people on cleanroom requirements and practices to maintain cleanliness.
Lab safety
The document discusses important lab safety practices. Students should wear closed-toe shoes, long pants, an apron, and safety goggles when conducting experiments. Safe lab practices include properly disposing of waste, not eating or playing with chemicals, and always wearing gloves when handling substances. In the event of an accident, people should be alerted and protective equipment worn while containing and neutralizing spills before evacuating. At the end of the lab period, students should clean work areas and properly dispose of waste.
Lec 2 biosafety barriers in labs
Biosafety barriers in labs include personal protective equipment (PPE) like gloves, masks, and gowns as primary barriers. Biological safety cabinets (BSCs) are also important primary barriers that control hazards at their source. Secondary barriers include the laboratory structure like sealed perimeters, HEPA filters in exhaust systems, and specialized ventilation. Proper facility design and worker training are also crucial for effective biocontainment.
Lec biosafety barriers in labs ppe
Biosafety barriers in labs include personal protective equipment (PPE) like gloves, masks, and gowns as primary barriers. Biological safety cabinets (BSCs) are also primary barriers that control hazards at their source. Secondary barriers include the laboratory structure, such as sealed perimeters, HEPA filters on exhausts, sinks for handwashing, and sealed containment areas. Proper facility design and construction help provide increasing levels of protection depending on the biological agent risk level.
Personal Hygiene for pharma industry-Dr. A. Amsavel
Personal hygiene
Source of Contamination and control
GMP Requirement /Guideline
Procedures & Records
Protective Clothing & gowning
Health Examination
Hand wash – How and when
Training & Practice
by Dr. A. Amsavel
Hasl 1992dnlfile 1
This document provides guidance to protect responders from hazards during hurricane relief efforts. It describes 14 main hazards including unstable structures, noise, dust, heat stress, confined spaces, chemicals, electricity, carbon monoxide, injuries, heavy equipment, food/water-borne diseases, animal/insect-borne diseases, and traumatic stress. For each hazard, it lists protective measures like using proper protective equipment, monitoring conditions, and understanding symptoms of overexposure. It also provides tips for managing stress and maintaining health and safety.
Standard Grade Administration - Safe Working Practices and Procedures
Potential office hazards include slipping, falling, lifting injuries, and electrical hazards. Employers must provide a safe working environment under the Health and Safety at Work Act 1974 including hazard control, protective equipment, first aid, and accident recording. The Display Screen Equipment Regulations require ergonomic workstations, breaks, and eye exams. RIDDOR requires reporting of deaths, injuries keeping employees off work for more than 3 days, and dangerous occurrences to the HSE within set timeframes.
Labsafety
This document provides an overview of general laboratory safety. It discusses why safe working is important to protect oneself and others. UK law requires performing risk assessments and using control measures to minimize risks. Personal protective equipment and good hygiene practices are emphasized. Hazards like fires, broken glass, spills and electrical equipment are addressed. Proper waste disposal and only working with training is stressed.
Similar to Entering or Exiting the Work Area (20)
Personnel Hygiene and Gowning Degowning Procedure.pptx
Personnel Hygiene and Gowning Degowning Procedure.pptx
Personal Hygiene for pharma industry-Dr. A. Amsavel
Personal Hygiene for pharma industry-Dr. A. Amsavel
Standard Grade Administration - Safe Working Practices and Procedures
Standard Grade Administration - Safe Working Practices and Procedures
Recently uploaded
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdYour Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Recently uploaded (20)
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Entering or Exiting the Work Area
- 1. Procedure for Entering and Exiting Work Area Elva Clarke The University of the West Indies Occupational and Environmental Safety and Health Programme Chemistry Department, 2 Plymouth Crescent Mona Campus, Kingston 7, Jamaica W.I.
- 2. Entering the Work Area
- 5. Exiting the Work Area