Download to read offline
English proyect
- 1. Building my ownrobot Bryan Santos Teacher Israel Torres
- 2. Introduction In this monthlyproject, you will see how the process is and what the construction of my robot is based on, you will see the processes that we need for the robot, I hope you like it dear professor.
- 3. Purpose Demonstrate my potential whenit comes to doing a job at the university level develop and apply my knowledge based on the technological area Show my creativity and naive when developing my robot.
- 4. Research question and objectives • Howwe can make a simple robot with recyclable materials • • What materials do we need to make the robot? • • that the robot is able to cut the leaves •
- 5. . Theoretical Framework Making aneasy homemade robot is viable, in reality a robot is any machine or device that is under some programming to perform any activity automatically in response to some impulse or generally electro-mechanical stimulus. With this definition it is easy to understand that a robot is not only the archetype of Wall-E or Skynet, but rather a programmable washing machine that automatically performs the entire task by pressing a few buttons or robotic vacuum cleaners that, through sensors, detect the surface to be cleaned.
- 6. Theoretical Framework When we hearthe word robot, the first thing that comes to mind are those impressive metallic forms, humanoid or not, with thousands of functions and super modern that are sometimes considered intelligent and that we have seen in science fiction movies or video games, and It makes us think that making an easy homemade robot is an arduous task, impossible for anyone who is not an expert in technology or an advanced engineer, but the truth is that it can be something as simple as making my robot
- 7. Theoretical Framework Materials scissor popsicle stick motor hot rubber pillbox top negative and positive cables clove connector battery
- 8. Theorical framework • Takethe lid and open 2 holes in the middle and one below the first hole • • Insert the nail through the secondary hole • • having the motor we will see that it has a small had, then we will insert that had into the hole in the cover • • we fill the lid with the hot rubber • • cut several pieces of wooden sticks (6 small pieces and one medium) • • We make two columns of 3 small pieces of wooden sticks and on top of both columns we place the medium one, this we glue the sides of the small hole of the scissors • • we proceed to connect the cables to the motor and the switch • • let's make it work • • we empty the container of pills • • We glue this box to the engine • • then we glue the scissors to what we have already done, making sure that the nail is in the middle of the 2 columns of pieces of wood
- 9.
- 10. Findings Learn that doingthese types of activities will help you develop your mental skills I learned how to work this type of project no matter how difficult it looks, I learned that following directions helps you a lot here
- 11. Conclusions Despite the factthat my project was a total chaos, I would have liked it to work, and well in conclusion it was a very nice experience despite the result, since in my 3 years in high school we had never worked on this, and thank you very much
- 12. Special Thanks First of all,I would like to thank you teacher for the great experience and also thank certain relatives of mine even if they don't know it, because my aunt and my mother were there with me until the last attempt.
- 13.
- 14.
- 15.