The document describes Frigi-Tech, a refrigerant oil additive that improves heat exchange, reduces friction, provides corrosion and oxidation protection, and extends equipment life. It does this by displacing refrigerant oil buildup, reducing friction of moving compressor parts, and providing corrosion and oxidation protection. Frigi-Tech is compatible with any hermetically or semi-hermetically sealed system, all refrigerants including ammonia, and can change its base oil to match the brand currently used. It provides benefits such as shortened cycle times, extended equipment life, reduced noise, and reduced maintenance.
Phillips 66® CVT Fluid is a premium-quality, full-synthetic transmission fluid specifically designed for use in passenger cars with belt-driven continuously variable transmissions. It has been specifically engineered to have the unique frictional properties required for use in this type transmission.
Phillips 66® CVT Fluid is a premium-quality, full-synthetic transmission fluid specifically designed for use in passenger cars with belt-driven continuously variable transmissions. It has been specifically engineered to have the unique frictional properties required for use in this type transmission.
Reactive nature of oil degradation products, stle 2016 06.06.2016Jatin Mehta
This paper describes about antioxidant replenishment in turbine oil, reactive nature of oil degradation products i.e. varnish and effectiveness of antioxidant additive readditization. Presented at STLE (Tribology and Lubrication Engineering Society), Annual Meeting, Las Vegas, 2016.
Lubrication is one of the main preventative maintenance activities.
Lubricants have a wide range of properties that impact their physical and chemical properties Knowing about these properties is important in determining which lubricant is best for which situation.
Oil analysis identifies early signs of contamination, fluid degradation and abnormal wear before they cause costly and permanent damage to equipment.
Tư vấn miễn phí & Đặt hàng dầu truyền nhiệt ( 0908.131.884 Anh Quyền ). Công ty TNHH TMDV Hoài Phương là nhà phân phối dầu nhớt , mỡ bôi trơn cấp 1 của AP Oil Saigon Petro khu vực miền đông nam bộ. Cam kết các sản phẩm Chất lượng Quốc Tế - Giá cạnh tranh - Giao hàng nhanh - Hậu mãi chu đáo
Project Sales Corp., India is the exclusive distributors for Lubchem Products in India
PSC is one of India’s largest independent distributors of specialty lubricants for applications below and above the water line. We stock and sell a whole range of specialty lubricants designed specifically for marine and offshore drilling markets. All formulated to work better.
Know more at www.pscspecialtylubricants.com
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
Reactive nature of oil degradation products, stle 2016 06.06.2016Jatin Mehta
This paper describes about antioxidant replenishment in turbine oil, reactive nature of oil degradation products i.e. varnish and effectiveness of antioxidant additive readditization. Presented at STLE (Tribology and Lubrication Engineering Society), Annual Meeting, Las Vegas, 2016.
Lubrication is one of the main preventative maintenance activities.
Lubricants have a wide range of properties that impact their physical and chemical properties Knowing about these properties is important in determining which lubricant is best for which situation.
Oil analysis identifies early signs of contamination, fluid degradation and abnormal wear before they cause costly and permanent damage to equipment.
Tư vấn miễn phí & Đặt hàng dầu truyền nhiệt ( 0908.131.884 Anh Quyền ). Công ty TNHH TMDV Hoài Phương là nhà phân phối dầu nhớt , mỡ bôi trơn cấp 1 của AP Oil Saigon Petro khu vực miền đông nam bộ. Cam kết các sản phẩm Chất lượng Quốc Tế - Giá cạnh tranh - Giao hàng nhanh - Hậu mãi chu đáo
Project Sales Corp., India is the exclusive distributors for Lubchem Products in India
PSC is one of India’s largest independent distributors of specialty lubricants for applications below and above the water line. We stock and sell a whole range of specialty lubricants designed specifically for marine and offshore drilling markets. All formulated to work better.
Know more at www.pscspecialtylubricants.com
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
Lubrication accounts for a small part of the overall maintenance budgets and the right lubricant goes a long way to reduce downtime, improve reliability and enhance equipment life.
Leading bearing manufacturers have conducted studies to find out the reasons for premature bearing failure. More than one-third of bearing failures is due to imperfect lubrication. In many more cases, which cannot be traced directly to imperfect lubrication, it’s still the underlying cause.
Summit Industrial Food Grade Lubricants from La Frenz Mechanical, Inc. in Bakersfield, CA.
Contact Kevin Edwards - Sales Manager at (661) 302-7728 or Email: kevin@lfzmech.com
We'll begin with the cool, liquid refrigerant entering the indoor coil, operating as the evaporator during cooling. As its name implies, refrigerant in the evaporator "evaporates." Upon entering the evaporator, the liquid refrigerant's temperature is between 40 and 50°F and without changing its temperature; it absorbs heat as it changes state from a liquid to a vapor. The heat comes from the warm, moist room air blown across the evaporator coil. As it passes over the cool coil, it gives up some of its heat and moisture may condense from it. The cooler, drier room air is re-circulated by a blower into the space to be cooled. The vapor refrigerant now moves into the compressor, which is basically a pump that raises the pressure so it will move through the system. Once it passes through the compressor, the refrigerant is said to be on the "high" side of the system. Like anything that is put under pressure, the increased pressure from the compressor causes the temperature of the refrigerant to rise. As it leaves the compressor, the refrigerant is a hot vapor, roughly 120 to 140°F. It now flows into the refrigerant-to-water heat exchanger, operating as the condenser during cooling. Again, as the name suggests, the refrigerant condenses here. As it condenses, it gives up heat to the loop, which is circulated by a pump. The loop water is able to pick up heat from the coils because it is still cooler than the 120-degree coils. As the refrigerant leaves the condenser, it is cooler, but still under pressure provided by the compressor. It then reaches the expansion valve. The expansion valve allows the high-pressure refrigerant to "flash" through becoming a lower pressure, cooled liquid. When pressure is reduced, as with spraying an aerosol can or a fire extinguisher, it cools. The cycle is complete as the cool, liquid refrigerant re-enters the evaporator to pick up room heat
ITS HERE WHERE THE OIL ATTACHES TO THE TUBES AND BUILDS LAYERS, IMPEDING THE HEAT TRANSFER ABILITY. FRIGI-TECH BONDS TO THE METAL REPLACING THE OIL AND SENDS IT BACK TO THE LUBRICATING CYCLE. THE AMOUNT OF FRIGI-TECH IS UNMEASURABLE BY MECANICAL MEANSS THUS DOES NOT IMPED THE HEAT TRANSFER ONCE ATTACHED TO THE TUBES.
INSIDE OF HEAT EXCHANGING METAL TUBES
The ASTM Falex Test utilizes an unhardened roller bearing as a brake against a motor driven spinning disk. The force required to stop the disk is a measure of the coefficient of friction, and the amount of bearing damage is a measure of the anti-wear characteristics. The test results showed that when 5% Frigi-Tech Refrigeration Oil Supplement was added to the refrigeration oil, the amount of force required to stop the disk increased dramatically
Despite the fact that this higher braking force was exerted 10 times longer than the dry test, or the pure oil test, the amount of bearing wear damage was significantly less when Frigi-Tech was added.
The length of time that the bomb pressure is above 100 psi is a measure of the oil’s stability and resistance to oxidation. The ASTM Rotating Bomb Oxidation Test results (shown below in Figure 7) reveal that oil treated with Frigi-Tech maintains its oxidation resistance 3 times longer than untreated refrigeration oil does.