Let us help you save on your operational and maintenance costs.

2. Grease
Pin-Tac™
HyPlex™
MTP Ultra™
670 Copper Gear Cote™
Construction equipment can be
dependent on a fraction of an ounce
of grease to keep it operational.
Proper grease selection is vitally
important for protecting construction
equipment. Bucket pins, pivot pins,
king pins and articulated steering
systems take a severe beating in the
construction environment. Hydrotex
grease provides superior extreme
pressure protection and is resistant
to water wash-out and severe shock
pound-out.
Combat Excessive Heat•
Provide Superior Extreme Pressure•
Protection
Resist Water Wash-Out and•
Severe Shock Pound-Out
Protect Equipment•
Gear Lubricants
Hydro-Syn EP™
Multi-Film®
Proprietary EP additives chemically shield gear
surfaces against metal-to-metal contact.
Resilium®
enables lubricants to adhere and
coat all metal surfaces to prevent squeeze-out
and dry start up.
Reduce Friction•
Reduce Heat•
Reduce Wear•
Keep Gear Sets Clean, Corrosion Free and•
Rust Free
Hydraulic Fluids
Fuel Saving Hydrosynthetic™
Hydraulic Fluid
Energy Saving Lubricant
Fuel Saving Hydrosynthetic™
Hydraulic
Fluids are anti-wear, multi-functional
hydraulic and industrial lubricants based
on advanced synthetic hydrocarbon
technology.
Recommended for all hydraulic gear,
vane and piston pumps that must
operate over a wide temperature range
from arctic cold to blazing hot.
Energy Savings with the Ultra High
Viscosity Indexes (UHVI) and a
proprietary additive system, Fuel Saving
Hydrosynthetic Hydraulic Fluid improves
both the mechanical efficiency and
volumetric efficiency of the hydraulic
systems to reduce frictional losses and
save energy.
Fuel Saving Performance
Demonstration Summary
Caterpillar®
318C L Excavator
1 m3
/1.3 yd3
bucket capacity, medium size in
Cat®
excavator line Cat 3066T diesel engine
125hp/93kW•
2200 rpm max•
5 - 6 gal/hr fuel consumption•
15.2 - 19.5 kg/hour fuel consumption•
Hydraulic System
Duel piston pump feeding 3 piston motors
(tracks and swivel), plus boom, sick and bucket
cylinders (5000 psi/345 bar max.)
Maximum pump flow rates
25.1 gpm per pump•
50.2 gpm to system•
Hydraulic fluid volume
67.4 gal. total in system•
33.6 gal. in tank•
Fuel
Consumed Per
Work Cycle,
kg/cycle
Fuel
Consumption
Improvement,
Percentage
Fuel
Consumed
Per Hour,
kg/hour
Fuel
Consumption
Improvement,
Percent
Work Cycles
Per Hour,
Cycles/hour
Percent
Improvement
Cat HYDO
L46 grade HF
@ Full-Throttle
0.364 --- 19.5 --- 53.5 ---
Cat HYDO
L46 grade HF
@ 90% Throttle
0.380 --- 15.2 --- 40.0 ---
@ Full-Throttle
0.297 +18.4% 16.8 +13.8% 56.6 +5.8%
@ 90% Throttle
0.280 +26.3% 13.9 +8.6% 49.7 +24.3%
Test Protocol
Standard earthmoving work protocol, shifting piles
of earth 100 ft. Mild Fall October-November ambient
operating temperatures (45-65ºF) Equivalent time and
work output for each fluid, ~1 minute/work cycle Tests
conducted with engine at full-throttle and 90% throttle
© 2009 Caterpillar All Rights Reserved

3. Fuel Improvers
Power-Kleen™
& Power-Kleen™
Arctic
Diesel Fuel Improvers
Power-Kleen™
is a multi-functional diesel fuel improver
specially formulated for warm ambient temperatures to
protect, clean and lubricate fuel system components while
improving fuel economy and reducing emissions. The
added combination of pour point depressants and wax
crystal modifiers make the use of Power-Kleen™
Arctic critical
for winter maintenance and cold weather reliability.
Reduce Smoke and Emissions•
Protect Against Rust and Corrosion•
Clean and Maintain Fuel Injectors•
Prevent Fuel Pump and Injector Wear•
Increase MPG/HPG•
Registered with EPA•
Essentialube®
Advanced Formula Blending & Flushing Agent
Essentialube®
is a cost-effective performance improver for
both fuels and lubricants.
Retard Formation of Gum, Varnish and Carbon Deposits•
Disperse Moisture•
Neutralize Harmful Acids•
Provide More Power and Better Performance•
Reduce Smoke and Emissions•
Conditions and Stabilizes Fuel•
Power Transmission Fluids
Hy-Torque®
and Hy-Torque®
Gold
Hy-Torque®
is a multi-use high performance transmission
fluid that reduces wear and protects pumps, gears, valves,
bearings, bushings, clutch facings and seals in transmission
and hydraulic systems. For the most severe applications we
recommend Hy-Torque®
Gold.
Improve Shifting and Reduce Noise•
Reduce Operating Temperatures•
Clean and Prevent Wear and Deposits•
Maintain Pliability and Elasticity of Seals•
Provide Superior Rust and Corrosion Protection•
Extend Maintenance Intervals•
Hy-Torque Gold is an approved Allison C-4 Fluid:
Hy-Torque Gold, C4-31924002
HyTrax™
Hytrax™
hydraulic, transmission and axle fluid exceeds the
Caterpillar TO-4 performance specification for driveline
lubricants.
Clean and Prevent Wear and Deposits•
Maintain Pliability and Elasticity of Seals•
Provide Superior Rust and Corrosion Protection•
Extend Maintenance Intervals•
Hytrax meets or exceeds the following applications:
Caterpillar TO-4•
Komatsu•
Komatsu Dresser•
Allison C-4 Automatic Transmission•
Eaton and Dana Manual Transmission•
Engine Oils
HyFilm®
LEO - API CJ-4
HyFilm®
Supreme - API CI-4
Hydrotex®
engine oils are formulated with Hydrosynthetic™
base fluids with the lubricity properties of a mineral oil and the
long-life and oxidation stability of synthetic base stocks. They are fortified with a high detergent and high dispersant additive
package to maintain engine cleanliness and control deposits. Superior anti-wear and corrosion inhibitors extend engine
life. Hydrotex engine oils have been field tested and are used regularly in heavy construction equipment operating under
the most severe service and harsh environment applications with unprecedented results. Our engine oils are designed to
exceed all lubrication specifications.
Clean Engines and Prevent Corrosion•
Extend Oil Change Intervals•
Improve Engine Protection•
Lower Maintenance Costs•

4. 12920 Senlac Drive | Farmers Branch, TX 75234 | 800.527.9439 | www.hydrotexlube.com
Hydrotex is committed to business methods and product technologies
that reduce emissions and toxic waste as well as conserve valuable
natural resources. We take improving the environment very seriously.
We believe that ecological stewardship improves profitability for those
who take a leadership role. It’s just good business to eliminate waste,
limit pollution, save energy, protect capital assets and it’s the right thing
to do.
Our Hydrosynthetic™ industrial and automotive lubricants allow
for exceptionally long drain intervals, thus conserving petroleum
resources and reducing waste oil disposal into the environment. We are
committed to providing our customers, our neighbors and our children
with a legacy of clean air, clean water and a safe environment.
Hydrotex®
is a manufacturer and distributor of unique high performance lubricant and fuel improver solutions. As an employee owned company, we help our
customers save energy, limit pollution, improve operational reliability and improve safety for employees and families. Our products and services leverage over
70 years of innovation resulting in superior lubrication solutions and high touch customer service.
Hydrotex name, design and related marks are trademarks of Hydrotex®
2009 Hydrotex All Rights Reserved.
Hydrotex Educational Programs
Lubrication training is a vital step
in developing and maintaining
successful maintenance
programs. Through our Hydrotex
Lubrication University, we offer
fundamental and customized
lubrication training. Either at our corporate office or at our partners’
facilities across the nation, we present our Principles of Lubrication
and Fuel Management seminars, continuing education programs and
application specific topics.
Customers are also invited to attend quarterly basic training programs,
which can lead to becoming a Certified Lubrication Specialist (CLS™)
after passing a 3-hour written examination conducted by the Society of
Tribologists and Lubrication Engineers (STLE).
Hydrotex also supports the National Institute for Automotive Service
Excellence, and conducts numerous training and educational programs
at national, regional and local associations, trade shows and educational
forums.
Hydrotex®
Ecological Stewardship:
Helping Reduce Your Carbon Footprint
The Hydrotex® Advantage
Hydrotex®
is committed to providing our customers the
best total lubrication solution for their equipment. This
commitment becomes reality as your operating costs
are reduced because we help you….
Achieve the Lowest Possible Annual Lubrication•
Expense
Reduce Energy Consumption•
Reduce Waste Lubricants•
Reduce Maintenance Labor Hours•
Extend the Service Life of Valuable Capital Equipment•
Extend Drain Intervals•
Minimize Unplanned Downtime•
Improve Maintenance Schedules•
Manage Continuous Improvement Programs•
Qualify for Carbon Reduction Programs•
The Hydrosynthetic™ Lubricant
Backbone
The backbone of many Hydrotex lubricants is our utilization
of Hydrosynthetic base fluids. Hydrotex lubricants have
enhanced properties for lubricity, oxidation stability, and
thermal durability. Our proprietary additives work to protect
your equipment and to provide maximum protection against
load, speed, temperature and environmental stresses. Moreover,
most of our Hydrosynthetic base fluids have very high viscosity indexes for
a wider span of operational temperatures. You can count on Hydrotex
formulators to pick the best base fluid for your application and to
deliver the best value. From deserts to arctic conditions, Hydrosynthetic
Lubricants keep your equipment optimally lubricated.
Oil & Fuel Analysis Programs
These detailed and in-depth analysis programs identify potential problems
before they cause equipment downtime. Our laboratories evaluate each
sample to determine problems and report them so corrective actions can
be taken.
Ask us how to improve your reliability-centered maintenance program
by establishing a proper oil analysis program. We use an independent
laboratory for oil analysis and testing.
Improved Output
Capabilities
Reduced
Operating Costs
Increased
ROI
Reduced
Carbon Footprint
Continuous
Improvement
& Ongoing
Training
Implement
Key Metric
Reporting
Develop Standard
Operating
Procedures (SOP) &
Lubrication
Practices
Implement
Fuel Analysis
Program
Implement
Extended
Drain
Intervals & Oil
Analysis Program
Conduct Root
Cause Analysis &
Solutions for
Significant
Lubrication Issues
Conduct
Customer
Specific
Lubrication
Training
Approve the
Hydrotex®
Survey
Conduct A
Hydrotex® Survey*
and Confirm OEM
Recommendations
Introduce
Principles of
Lubrication
(POL) Training
Commit to
Changeover
to Hydrotex®
Lubricants &
Methods
Agree on Historic
Lubrication Costs
&
Maintenance
Activity Levels
Review OEM
Recommendations,
Previous Years’
Lubrication
Problems, Usage
and Expense
Define Goals
& Develop
Implementation
Plan
*There are Several Types of Hydrotex® Surveys