This document discusses various instructions used in 8051 microcontroller programming including MOV, MOVC, MOVX, MUL, NOP, ORL, POP, PUSH, RET, RETI, RL, RLC, RR, and RRC. It was written by Prof. Anish Goel for an embedded systems programming course.

1. 8051 Microcontroller
Programming Part - C
Prof. Anish Goel
Embedded Systems

2. MOV DPTR,#data16
Embedded Systems Prof.Anish Goel2

3. MOVC A,@A+ <base-reg>
Embedded Systems Prof.Anish Goel3

4. Embedded Systems Prof.Anish Goel4

5. MOVX <dest-byte>,<src-byte>
Embedded Systems Prof.Anish Goel5

6. Embedded Systems Prof.Anish Goel6

7. MUL AB
Embedded Systems Prof.Anish Goel7

8. NOP
Embedded Systems Prof.Anish Goel8

9. ORL <dest-byte> <src-byte>
Embedded Systems Prof.Anish Goel9

10. Embedded Systems Prof.Anish Goel10

11. Embedded Systems Prof.Anish Goel11

12. ORL C,<src-bit>
Embedded Systems Prof.Anish Goel12

13. POP direct
Embedded Systems Prof.Anish Goel13

14. PUSH direct
Embedded Systems Prof.Anish Goel14

15. RET
Embedded Systems Prof.Anish Goel15

16. RETI
Embedded Systems Prof.Anish Goel16

17. RL A
Embedded Systems Prof.Anish Goel17

18. RLC A
Embedded Systems Prof.Anish Goel18

19. RR A
Embedded Systems Prof.Anish Goel19

20. RRC A
Embedded Systems Prof.Anish Goel20