Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm

•

0 likes•496 views

This document provides specifications for two-hole cable clamps manufactured in different materials and intended for fixing power cables indoors and outdoors. It includes a selection table with over 15 part numbers specifying the material, cable diameter range, dimensions, fixing details, and weight. Testing information shows the cable clamps passed impact resistance, electro-mechanical force resistance, needle flame, lateral load, and axial movement tests per the IEC 61914 standard.

Technology

B LSF LUL
2F-07 B/LSF/LUL 38-46 92 60 54 68 2 x M10 25 73.0 91.0 119.0
2F-08 B/LSF/LUL 46-51 103 71 54 79 2 x M10 25 80.9 109.9 132.0
2F-09 B/LSF/LUL 51-57 103 76 54 79 2 x M10 25 95.0 119.0 155.0
2F-10 B/LSF/LUL 57-64 103 82 54 79 2 x M10 25 89.1 122.5 156.5
2F-11 B/LSF/LUL 64-70 130 89 54 106 2 x M10 15 116.0 157.3 189.0
2F-1200 B/LSF/LUL 70-76 130 95 54 106 2 x M10 15 124.0 167.3 202.0
2F-1201 B/LSF/LUL 76-83 130 100 54 106 2 x M10 10 126.0 170.0 205.0
2F-1202 B/LSF/LUL 83-90 130 108 54 106 2 x M10 10 128.0 172.0 208.0
2F-131 B/LSF/LUL 90-97 150 115 54 126 2 x M10 5 152.0 208.0 248.0
2F-132 B/LSF/LUL 97-105 150 122 54 126 2 x M10 5 156.0 208.0 254.0
2F-141 B/LSF/LUL 105-112 161 130 54 135 2 x M10 5 179.5 238.8 292.0
2F-142 B/LSF/LUL 112-120 169 138 54 143 2 x M10 5 193.5 261.0 315.4
2F-151 B/LSF/LUL 120-128 177 148 54 151 2 x M10 5 212.2 280.0 346.0
2F-152 B/LSF/LUL 128-135 185 158 54 158 2 x M10 5 228.5 304.4 372.4
Two Hole Cableclamp (2F) Data Sheet
Manufactured as standard in black polypropylene (B), black flame retardant V0 zero halogen phosphorus
free Nylon (LSF) or to special order in a London Underground approved material (LUL).(Material data
sheets are available on request). UK Design Reg. No. 355854. Used to fix power cables in indoor and
outdoor applications.
H
mm
D
mm
W
mm
Part No
Material
Suffix
Cable Dia.
Range
mm
Selection Table for Two Hole Cable Clamps
The LUL version of the 2F Two Hole
Cableclamps are compliant with the
requirement of London Underground
Standard 1-085. Product Register No.
364.
P
mm
Dimensions
Fixing
Hole
Pack
Qty.
Weight g
Issue 06 30/08/2011 Page 1 of 2

Testing Information
Test
Data
B
-
Pass
Refer to
Ellis
Patents.
-40 to 40
>30
7330
1220
Two Hole Cable Clamps have been tested in line with the International Standard of "Cable Cleats for
Electrical Installations" IEC 61914: 2009. Typical results below.
Impact Resistance 6.2, 6.3.5, 9.2
Resistance to Electro
Mechanical Force
(Undertaken at
Damstra
Laboratories NL)
6.4, 6.4.3, 9.5
Temperature for
Permanent
Application
6.2
Needle Flame Test 10.0, 10.1
Lateral Load Test 9.3
Axial Movement Test 9.4
6.1, 6.1.3Cleat Type
IEC
61914:2009
Classification
Clause
Properties
Units /
Classification
LSF
Non Metallic
>120
Newtons (N)
Newtons (N)
Non Metallic
Units /
Classification B
Very Heavy
Classification
(>6.7kg @
kA @ 600mm
Centres. 4 Core
SWA Cable (3
cores used)
oC
Application
Time
(seconds)
Very Heavy
Classification
(>6.7kg @
Refer to
Ellis Patents.
oC
Application
Time
(seconds)
Newtons (N)
Newtons (N)
Issue 06 30/08/2011 Page 2 of 2
18400
1200
Test Data
LSF
-
Pass
76 Peak
(Report No.
PDL-10.150)
-40 to 60

The document provides technical specifications for CMP Zen insulated cable glands models B327 and B350. The B327 provides cable sealing and termination for armored cables, including termination of the cable screen. Both models are rated IP66 and are suitable for various applications including high voltage systems where protection from fault currents is required. Dimensions and material options are provided for different cable sizes.

Ellis Patents 2F-07 2 Hole Cable Clamp Cleat 38-46mm

Thorne & Derrick International

This document provides specifications for two-hole cable clamps used to fix power cables. It includes a selection table with over 15 models of cable clamps listing the material, cable diameter range, dimensions, fixing details, and weight. The document also details testing information for the cable clamps, noting they have been tested according to international standards for impact resistance, resistance to electro-mechanical force, temperature range for application, and other tests. Results are provided showing the cable clamps passed all tests.

Pfisterer Connex Surge Arresters

Thorne & Derrick International

The document summarizes information about CONNEX surge arresters, which are metal-enclosed, fully insulated surge protection devices used for outdoor and offshore switchgears and transformers. The arresters contain metal oxide resistors and silicone rubber insulation, provide IP66 protection, and limit overvoltages to prevent equipment damage. Selection of an appropriate arrester requires matching its continuous operating voltage, residual voltage, and TOV characteristic to the protection levels and insulation coordination of the protected equipment.

Nexans Euromold 158LR HV Elbow Connectors 12kV 250Amp 70-95sqmm

Thorne & Derrick International

The document discusses specifications for the 158LR separable connector, which meets CENELEC HD 629.1 requirements for up to 24 kV and 250 A. It has an insulating EPDM layer between conductive inner and outer jackets. The connector is designed to connect polymeric cable to equipment safely. Ordering information is provided for selecting the proper connector kit based on cable type, size, and voltage rating.

SPS Low Voltage Live Pot End Kits - Heat Shrink Pot End Joints & Live Cable E...

Thorne & Derrick International

The document provides information about low voltage live pot end kits and low voltage cable abandonment kits from Shrink Polymer Systems. It lists the product codes and applicable cable types (PILC or XLPE) for popular 4, 3, and 2 core kit configurations for sealing cable ends on live cables or abandoning cables. Kits are available for cable cross-sections between 4-400mm2. Custom kits can also be provided for any cable type if details are given.

Nexans Airfield Ground Lighting Cables (Primary Secondary)

Thorne & Derrick International

This document provides information on various types of cables for airfield lighting applications, including: - Primary circuit cables used between constant current regulators and transformers, including the FLYCY, FL2XCY, FL2XCYRY, RHDt, and RHV cables. - Secondary circuit cables used between transformers and lights, including the H07RN-F and FLGG cables. - 400Hz cables including the RHEYGROUND, RHEYCORD, and RHEYPUR cables. - It provides specifications for each cable type including conductor material and size, insulation material, screening, outer sheath material, voltage rating, temperature rating, bending radius, and applicable standards.

Nexans Euromold 152SR Screened Separable Straight Connector 12-24kV

Thorne & Derrick International

The document provides information on the 152SR straight connector for connecting polymeric insulated cable to equipment up to 24 kV and 250 A. The connector consists of a conductive EPDM insert, jacket and insulating layer, along with interface, conductor connector, and test point. It meets CENELEC HD 629.1 standards and is tested for AC withstand and partial discharge prior to shipping. Installation instructions and part number ordering information is also provided based on cable type, size, and insulation diameter.

Prysmian FP600S Multicore Fire Resistant Cables

Thorne & Derrick International

FP600S is a fire resistant armoured cable suitable for essential emergency systems. It has several key features including: - Maintaining circuit integrity in the event of a fire for up to 120 minutes according to various British Standards. - Carrying power and control for life safety and firefighting systems such as smoke barriers and fire pumps. - Having a mineral ceramic insulation and galvanized steel wire armour for protection against heat and mechanical impacts. - Providing current ratings from 42 to 787 amps depending on the cable size and installation method.

The document provides information on street lighting equipment from Thorne and Derrick UK, including cutouts and isolators, feeder pillars, and cable joints. It describes the Trojan range of isolators which come in mini, midi, and maxi sizes and can incorporate switches, fuses, MCBs, and other modules. It also describes the Fortress and Titan2 ranges of feeder pillars and provides ordering codes and specifications for various components.

Mecatraction - SOLFIL+ Earthing Clamps

Thorne & Derrick International

11kV Cable - Single Core XLPE Insulated AWA BS6622 - BS7835

Thorne & Derrick International

This document provides specifications for standard medium voltage power cables with voltages up to 11,000V. It describes the cable construction including a stranded copper conductor, extruded insulation layers of XLPE, insulation and conductor screens, a copper tape metallic screen, PVC bedding and sheathing, and an aluminium wire armour. Tables provide details on the cable dimensions, weights, coil lengths, bending radii and electrical ratings for conductor cross-sectional areas from 50 to 1000mm2.

Ellis Patents Colossus Cable Cleats

Thorne & Derrick International

This document provides specifications for Colossus Cable Cleats including: 1. Dimensions, weight, and part numbers for various sizes of standard and saddled Colossus Cable Cleats. 2. Testing information showing the cleats meet the Very Heavy classification for lateral load resistance, withstanding impact, and resisting electromechanical forces up to 104kA. 3. Additional specifications on material composition, temperature range, and passing a needle flame test.

Xm5 light-bar

Purple Industries

Nexans Euromold MV Separable Connectors & Bushings - Interface C Compact

Thorne & Derrick International

The document is a catalogue from Nexans that describes their Euromold division and the products they offer. Euromold specializes in prefabricated cable accessories for medium voltage energy distribution, including connectors, joints, bushings and terminations from 12-42kV. The catalogue provides information on their separable connectors, including tee connectors in different voltage classes and sizes to connect cables to equipment or other cables. It describes the components, standards, and provides ordering information.

nyfgby cable

Roy M Gultom

Resin Cable Joints, Multicore Power Cables XLPE PILC - Branch Joints - Cable ...

Thorne & Derrick International

This document provides instructions for joining different types of low voltage cables, including PVC, PILC, telephone, pilot and control cables. It explains the stripping dimensions and procedures for straight joints, branch joints and transition joints between cable types. The instructions also describe how to apply earth leads, complete the joints by encasing them in resin-filled cases, and ensure proper curing before use.

Nexans Euromold MV Separable Connectors & Bushings - Interface F

Thorne & Derrick International

This document provides information about Euromold, a manufacturer of prefabricated cable accessories for medium voltage energy distribution. It includes a company presentation, descriptions of various cable connector products including separable tee connectors, coupling connectors, and asymmetrical tee connectors. It provides specifications, standards, ordering information and diagrams for these products.

Fanout assemblies catalogue

Fatih BATAL

LC Connector Compliance IEC 61754-20, TIA 604-10-A, RoHS SC Connector Compliance IEC 61754-4, TIA 604-3, RoHS Fiber Count 8 Fibers Cable Diameter 3.0mm Subunit Diameter 1.8mm Alignment Technology Full ceramic ferrule (Zirconia ZrO2) Operating Temperature -40°C to +85°C Flammability UL94 V-0 Durability > 1000 mating cycles Transmission with Applied Tensile Load GR-326 CORE 4.4.3.5 Insertion Loss: IEC 61300-3-4-MB Multimode: ≤ 0.40dB Return Loss: IEC 61300-3-6-MB Multimode: ≥ 40dB Connector End Face Geometry IEC 61755-3

GL Technology

龙谭

Hunan Guanglian Photoelectricity Technologies Co., Ltd is a leading global manufacturer of fiber optic cables. It has over 300 equipment for manufacturing various cables and over 100 testing equipment. It produces cables for outdoor, indoor, submarine, and other applications. Customers can be assured that working with GL Technology will lead to a successful fiber optic cable solution and experience.

smg-opzv-asia-131115_english-1-

Bernadette Polintan

This document summarizes the technical specifications of the FIAMM SMG OPzV range of tubular lead-acid batteries. Key points include: - The batteries comply with international standards including IEC, Eurobat, and DIN. - They have tubular positive plates, immobilized electrolyte gel structure, and highly porous separators and gauntlets. - Capacities range from 200Ah to 3000Ah with excellent cycling performance and deep discharge capability. - Other features include minimal gassing, non-spillable containment, 18 year design life, and recyclability.

ABB CEF-OT Indoor Current Limiting Fuses - IEC Standard 12kV-24kV

Thorne & Derrick International

This document describes CEF-OT high voltage fuse-links from ABB that are designed to limit short-circuit currents. The fuse-links comply with IEC standards and can operate immersed in transformer oil or outdoors. They protect equipment like transformers and cables from short circuits. The document provides technical specifications, time-current curves, and ordering information for different fuse-link types.

CMP E1W40 LSF Brass Cable Gland (Zero Halogen) - 26-40.4mm

Thorne & Derrick International

This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cables providing environmental sealing, while the A2 kit is for unarmored cables providing a seal on the outer sheath. Tables provide specifications for each kit type, including materials, temperature rating, cable details, and ordering information.

CMP E1W63S LSF Brass Cable Gland (Zero Halogen) - 45.6-59.4mm

Thorne & Derrick International

This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cable and the A2 kit is for unarmored cable. Tables provide the specifications of the gland sizes, entry threads, minimum thread lengths, ordering references, and cable diameter ranges.

CMP E1W25 LSF Brass Cable Gland (Zero Halogen) - 17-26.2mm

Thorne & Derrick International

CMP E1W50S LSF Brass Cable Gland (Zero Halogen) - 35-46.7mm

Thorne & Derrick International

This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cable and the A2 kit is for unarmored cable. Tables provide the specifications of the kits, including material, temperature rating, components, and sizing information for different cable diameters.

CMP E1W63 LSF Brass Cable Gland (Zero Halogen) - 54.6-65.9mm

Thorne & Derrick International

CMP E1W20 LSF Brass Cable Gland (Zero Halogen) - 12.5-20.9mm

Thorne & Derrick International

Ellis Patents 2 Hole Plastic Cable Cleat

Thorne & Derrick International

The document provides specifications for two-hole cable clamps manufactured in different materials for securing power cables. It includes a table listing various models of cable clamps specifying their material, dimensions, weight, fixing holes and packaging quantity. The clamps are tested according to international standards for properties such as flame resistance, load strength, impact resistance and temperature resistance.

1 f clamp data sheet 635150146240747612

Thorne & Derrick International

This document provides information on One Hole Cableclamps used to fix power cables. It is manufactured in black polypropylene, black flame retardant nylon, or a London Underground approved material. The document includes a selection table listing the various part numbers, material types, cable diameter ranges, and dimensions for each clamp. It also details testing information showing the clamps meet the European standard for cable cleats and lists properties such as temperature resistance, impact resistance, and load testing results.

What's hot

Pcb stackup design template with impedance control

Green Song

Lucy Lighting Street Lighting Electrical Catalogue

Thorne & Derrick International

Mecatraction - SOLFIL+ Earthing Clamps

Thorne & Derrick International

11kV Cable - Single Core XLPE Insulated AWA BS6622 - BS7835

Thorne & Derrick International

Ellis Patents Colossus Cable Cleats

Thorne & Derrick International

Xm5 light-bar

Purple Industries

Nexans Euromold MV Separable Connectors & Bushings - Interface C Compact

Thorne & Derrick International

nyfgby cable

Roy M Gultom

Resin Cable Joints, Multicore Power Cables XLPE PILC - Branch Joints - Cable ...

Thorne & Derrick International

Nexans Euromold MV Separable Connectors & Bushings - Interface F

Thorne & Derrick International

Fanout assemblies catalogue

Fatih BATAL

GL Technology

龙谭

smg-opzv-asia-131115_english-1-

Bernadette Polintan

ABB CEF-OT Indoor Current Limiting Fuses - IEC Standard 12kV-24kV

Thorne & Derrick International

CMP E1W40 LSF Brass Cable Gland (Zero Halogen) - 26-40.4mm

Thorne & Derrick International

CMP E1W63S LSF Brass Cable Gland (Zero Halogen) - 45.6-59.4mm

Thorne & Derrick International

This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cable and the A2 kit is for unarmored cable. Tables provide the specifications of the gland sizes, entry threads, minimum thread lengths, ordering references, and cable diameter ranges.

CMP E1W25 LSF Brass Cable Gland (Zero Halogen) - 17-26.2mm

Thorne & Derrick International

CMP E1W50S LSF Brass Cable Gland (Zero Halogen) - 35-46.7mm

Thorne & Derrick International

This document provides information on two cable gland kits, types E1W SOLO-Kit and A2 SOLO-Kit, for sealing and securing cables. Both kits contain cable glands, locknuts, tags, and low smoke and fume shrouds. The E1W kit is for armored cable and the A2 kit is for unarmored cable. Tables provide the specifications of the kits, including material, temperature rating, components, and sizing information for different cable diameters.

CMP E1W63 LSF Brass Cable Gland (Zero Halogen) - 54.6-65.9mm

Thorne & Derrick International

CMP E1W20 LSF Brass Cable Gland (Zero Halogen) - 12.5-20.9mm

Thorne & Derrick International

What's hot (20)

Pcb stackup design template with impedance control

Lucy Lighting Street Lighting Electrical Catalogue

Mecatraction - SOLFIL+ Earthing Clamps

11kV Cable - Single Core XLPE Insulated AWA BS6622 - BS7835

Ellis Patents Colossus Cable Cleats

Xm5 light-bar

Nexans Euromold MV Separable Connectors & Bushings - Interface C Compact

nyfgby cable

Resin Cable Joints, Multicore Power Cables XLPE PILC - Branch Joints - Cable ...

Nexans Euromold MV Separable Connectors & Bushings - Interface F

Fanout assemblies catalogue

GL Technology

smg-opzv-asia-131115_english-1-

ABB CEF-OT Indoor Current Limiting Fuses - IEC Standard 12kV-24kV

CMP E1W40 LSF Brass Cable Gland (Zero Halogen) - 26-40.4mm

CMP E1W63S LSF Brass Cable Gland (Zero Halogen) - 45.6-59.4mm

CMP E1W25 LSF Brass Cable Gland (Zero Halogen) - 17-26.2mm

CMP E1W50S LSF Brass Cable Gland (Zero Halogen) - 35-46.7mm

CMP E1W63 LSF Brass Cable Gland (Zero Halogen) - 54.6-65.9mm

CMP E1W20 LSF Brass Cable Gland (Zero Halogen) - 12.5-20.9mm

Similar to Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm

Ellis Patents 2 Hole Plastic Cable Cleat

Thorne & Derrick International

1 f clamp data sheet 635150146240747612

Thorne & Derrick International

Cable Cleats - Ellis Patents 1 Hole Nylon Cable Clamp (1F)

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It includes a selection table listing the part number, material, cable diameter range, and dimensions for 19 different clamp models. It also summarizes the results of testing the clamps according to the European standard for cable cleats, including that they passed impact resistance and electro-mechanical force tests, can be used in temperatures from -40 to 60 degrees Celsius, and have application times over 30 seconds for polypropylene and over 120 seconds for flame retardant nylon.

Ellis Patents 1F-19 Cable Clamp (One Hole) 51-57mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and fixings. Test results are also provided, showing the cable clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.

Ellis Patents 1F-14 Cable Clamp (One Hole) 23-27mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It includes a selection table listing the part number, material, cable diameter range, and dimensions for 19 different clamp models. It also summarizes the results of testing the clamps according to the European standard for cable cleats, including that they passed impact resistance and electro-mechanical force tests, can be applied at temperatures from -40 to 60 degrees Celsius, and withstand lateral and axial loads up to 470 and 360 newtons, respectively.

Ellis Patents 1F-15 Cable Clamp (One Hole) 27-32mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It includes a selection table listing the part number, material, cable diameter range, and dimensions for 19 different clamp models. It also summarizes the results of testing the clamps according to the European standard for cable cleats, including their resistance to impact, electro-mechanical force, temperature range for application, and other tests.

Ellis Patents 1F-18 Cable Clamp (One Hole) 46-51mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It includes a selection table listing 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and other specifications. Test results are also presented, showing the cable clamps pass requirements for impact resistance, resistance to electro-mechanical force, temperature resistance, and other standards.

Ellis Patents 1F-16 Cable Clamp (One Hole) 32-38mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials for fixing power cables. It includes a table listing 17 part numbers with their cable diameter ranges, dimensions, weights, and other specifications. The document also states that the LUL version complies with London Underground Standard 1-085 and provides test results showing the cable clamps meet the standards for impact resistance, resistance to electro-mechanical force, temperature resistance and other requirements.

Ellis Patents 1F-11 One Hole Cable Clamp 13-16mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and fixings. Test results are also provided, showing the cable clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.

Ellis Patents 1F-13 Cable Clamp (One Hole) 19-23mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges and dimensions. Test results are also included, showing the clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.

Ellis Patents 1F-12 Cable Clamp (One Hole) 16-19mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges, dimensions, weights, and fixings. Test results are also provided, showing the clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.

Ellis Patents 1F-17 Cable Clamp (One Hole) 38-46mm

Thorne & Derrick International

This document provides specifications for one hole cable clamps made of various materials, including black polypropylene, black flame retardant nylon, and a material compliant with London Underground standards. It lists 17 part numbers with corresponding cable diameter ranges and dimensions. Test results are also included, showing the clamps pass impact resistance, temperature, flame, and load tests as specified in BS EN 50368:2003 standards.

Ellis Patents 1 Hole Cable Cleat Plastic

Thorne & Derrick International

This document provides specifications for one-hole cable clamps made of different materials, including polypropylene (B), flame retardant nylon (LSF), and a London Underground approved material (LUL). It lists 17 part numbers with dimensions and weights. The clamps are compliant with London Underground Standard 1-085 and have passed testing according to IEC 61914:2009, including lateral load resistance, axial movement, impact resistance, resistance to electro-mechanical force, and temperature tolerance.

Ellis Patents LSF Zero Halogen Cleat - 1 Hole LSOH - 1F-10, 10-13mm

Thorne & Derrick International

This document contains product information for one-hole cable clamps, including a selection table listing various models with their specifications. It also provides test results showing the cable clamps passed all tests required by European standard BS EN 50368:2003, including impact resistance, resistance to electro-mechanical force, and resistance to axial and lateral movement loads. Additional information on material options, dimensions, temperature ratings and flame resistance is available by request.

Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, resistance to electromechanical force, temperature range of -40 to 150 degrees C, and lateral and axial load tests according to European standard BS EN 50368:2003.

Ellis Patents 2G-09N 51-57mm Cable Clamp - Ellis Patents Aluminium Two Hole C...

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, temperature resistance, axial and lateral load standards.

Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table and specifications for 12 different two-hole cable clamp models, including their cable capacity range, dimensions, fixing points, and part numbers. It also lists the results of testing the cleats according to the European standard for cable cleats.

Ellis Patents 2G-132N 95-101mm Cable Clamp - Ellis Patents Aluminium Two Hole...

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for use in harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, resistance to electromechanical force, temperature range of -40 to 150 degrees C, and lateral and axial load tests according to European standard BS EN 50368:2003.

Ellis Patents 2G-141N 101-108mm Cable Clamp - Ellis Patents Aluminium Two Hol...

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be epoxy coated for harsh conditions like sea air. The document provides a selection table with 10 different cleat models ranging from supporting cables up to 51mm to over 108mm in diameter. It also details testing information showing the cleats pass the requirements for impact resistance, temperature resistance, axial and lateral load standards.

Ellis Patents 2G-11N 64-70mm Cable Clamp - Ellis Patents Aluminium Two Hole C...

Thorne & Derrick International

Cast aluminium alloy cable cleats are designed for securing cables in industrial and outdoor environments. The cleats are manufactured from LM6 aluminium alloy and can be coated with epoxy for harsh conditions like sea air. The datasheet provides specifications for various models of two-hole cable clamps, including dimensions, fixing points, cable capacity ranges, and testing information showing the clamps meet the BS EN 50368:2003 standard.

Similar to Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm (20)

Ellis Patents 2 Hole Plastic Cable Cleat

1 f clamp data sheet 635150146240747612

Cable Cleats - Ellis Patents 1 Hole Nylon Cable Clamp (1F)

Ellis Patents 1F-19 Cable Clamp (One Hole) 51-57mm

Ellis Patents 1F-14 Cable Clamp (One Hole) 23-27mm

Ellis Patents 1F-15 Cable Clamp (One Hole) 27-32mm

Ellis Patents 1F-18 Cable Clamp (One Hole) 46-51mm

Ellis Patents 1F-16 Cable Clamp (One Hole) 32-38mm

Ellis Patents 1F-11 One Hole Cable Clamp 13-16mm

Ellis Patents 1F-13 Cable Clamp (One Hole) 19-23mm

Ellis Patents 1F-12 Cable Clamp (One Hole) 16-19mm

Ellis Patents 1F-17 Cable Clamp (One Hole) 38-46mm

Ellis Patents 1 Hole Cable Cleat Plastic

Ellis Patents LSF Zero Halogen Cleat - 1 Hole LSOH - 1F-10, 10-13mm

Ellis Patents 2G-142N 108-114mm Cable Clamp - Ellis Patents Aluminium Two Hol...

Ellis Patents 2G-09N 51-57mm Cable Clamp - Ellis Patents Aluminium Two Hole C...

Ellis Patents Aluminium Two Hole Cable Clamps - Aluminium Cable Cleats

Ellis Patents 2G-132N 95-101mm Cable Clamp - Ellis Patents Aluminium Two Hole...

Ellis Patents 2G-141N 101-108mm Cable Clamp - Ellis Patents Aluminium Two Hol...

Ellis Patents 2G-11N 64-70mm Cable Clamp - Ellis Patents Aluminium Two Hole C...

More from Thorne & Derrick International

Isolation procedures for safe working on electrical systems and equipment by ...

Thorne & Derrick International

Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment. You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically. THE RULES OF SAFE ISOLATION ARE: Obtain permission to start work (a Permit may be required in some situations) Identify the source(s) of supply using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Isolate the supply(s) Secure the isolation Prove the system/equipment is DEAD using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Put up warning signs to tell other people that the electrical installation has been isolated Once the system/equipment is proved DEAD, work can begin Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

Thorne & Derrick International

The Children North East Annual Golf Day Wednesday 9th May 2018

Thorne & Derrick International

The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.

3M Electrical Products Stocked By Thorne & Derrick International

Thorne & Derrick International

This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.

CATU Electrical Safety Catalogue

Thorne & Derrick International

This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

Thorne & Derrick International

1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds. 2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii. 3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Thorne & Derrick International

THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment. Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST. Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Thorne & Derrick International

The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.

Roxtec Cable Transit - B Frame Dimensional Drawing

Thorne & Derrick International

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

Thorne & Derrick International

T&D Experts In Equipment For Explosive Atmospheres

Thorne & Derrick International

Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.

Ultrasonic Flow Meters - Customer Specification Demand

Thorne & Derrick International

This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick International

This document provides information on Emtelle fibre optic cables, including: - An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions. - Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more. - Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.

Thorne & Derrick Process Heating Brochure 2016

Thorne & Derrick International

Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Thorne & Derrick International

Ripley Utility Tool Cable Preparation Tools

Thorne & Derrick International

The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.

RIDGID micro CD100 Combustible Gas Detector

Thorne & Derrick International

The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.

Itron Fact Sheet

Thorne & Derrick International

Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Thorne & Derrick International

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Thorne & Derrick International

The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.

More from Thorne & Derrick International (20)

Isolation procedures for safe working on electrical systems and equipment by ...

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

The Children North East Annual Golf Day Wednesday 9th May 2018

3M Electrical Products Stocked By Thorne & Derrick International

CATU Electrical Safety Catalogue

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Roxtec Cable Transit - B Frame Dimensional Drawing

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

T&D Experts In Equipment For Explosive Atmospheres

Ultrasonic Flow Meters - Customer Specification Demand

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick Process Heating Brochure 2016

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Ripley Utility Tool Cable Preparation Tools

RIDGID micro CD100 Combustible Gas Detector

Itron Fact Sheet

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Recently uploaded

Full-RAG: A modern architecture for hyper-personalization

Zilliz

Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.

Programming Foundation Models with DSPy - Meetup Slides

Zilliz

GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...

Neo4j

Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.

UiPath Test Automation using UiPath Test Suite series, part 5

DianaGray10

Presentation of the OECD Artificial Intelligence Review of Germany

innovationoecd

National Security Agency - NSA mobile device best practices

Quotidiano Piemontese

TrustArc Webinar - 2024 Global Privacy Survey

TrustArc

How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024? In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores. See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe. This webinar will review: - The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey - The top challenges for privacy leaders, practitioners, and organizations in 2024 - Key themes to consider in developing and maintaining your privacy program

Communications Mining Series - Zero to Hero - Session 1

DianaGray10

This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered: • Communication Mining Overview • Why is it important? • How can it help today’s business and the benefits • Phases in Communication Mining • Demo on Platform overview • Q/A

Best 20 SEO Techniques To Improve Website Visibility In SERP

Pixlogix Infotech

“I’m still / I’m still / Chaining from the Block”

Claudio Di Ciccio

GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...

Neo4j

Leonard Jayamohan, Partner & Generative AI Lead, Deloitte This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.

20240605 QFM017 Machine Intelligence Reading List May 2024

Matthew Sinclair

GenAI Pilot Implementation in the organizations

kumardaparthi1024

Mariano G Tinti - Decoding SpaceX

Mariano Tinti

Building Production Ready Search Pipelines with Spark and Milvus

Zilliz

UiPath Test Automation using UiPath Test Suite series, part 6

DianaGray10

Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI. UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities. Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes. What will you get from this session? 1. Insights into integrating generative AI. 2. Understanding how this integration enhances test automation within the UiPath platform 3. Practical demonstrations 4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath Topics covered: What is generative AI Test Automation with generative AI and Open AI. UiPath integration with generative AI Speaker: Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP

HCL Notes and Domino License Cost Reduction in the World of DLAU

panagenda

Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/ The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this! We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model. Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward. These topics will be covered - Reducing license cost by finding and fixing misconfigurations and superfluous accounts - How do CCB and CCX licenses really work? - Understanding the DLAU tool and how to best utilize it - Tips for common problem areas, like team mailboxes, functional/test users, etc - Practical examples and best practices to implement right away

Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf

Paige Cruz

Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack. While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack. I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

shyamraj55

AI 101: An Introduction to the Basics and Impact of Artificial Intelligence

IndexBug

Recently uploaded (20)

Full-RAG: A modern architecture for hyper-personalization

Programming Foundation Models with DSPy - Meetup Slides

GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...

UiPath Test Automation using UiPath Test Suite series, part 5

Presentation of the OECD Artificial Intelligence Review of Germany

National Security Agency - NSA mobile device best practices

TrustArc Webinar - 2024 Global Privacy Survey

Communications Mining Series - Zero to Hero - Session 1

Best 20 SEO Techniques To Improve Website Visibility In SERP

“I’m still / I’m still / Chaining from the Block”

GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...

20240605 QFM017 Machine Intelligence Reading List May 2024

GenAI Pilot Implementation in the organizations

Mariano G Tinti - Decoding SpaceX

Building Production Ready Search Pipelines with Spark and Milvus

UiPath Test Automation using UiPath Test Suite series, part 6

HCL Notes and Domino License Cost Reduction in the World of DLAU

Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

AI 101: An Introduction to the Basics and Impact of Artificial Intelligence

Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm

1. B LSF LUL 2F-07 B/LSF/LUL 38-46 92 60 54 68 2 x M10 25 73.0 91.0 119.0 2F-08 B/LSF/LUL 46-51 103 71 54 79 2 x M10 25 80.9 109.9 132.0 2F-09 B/LSF/LUL 51-57 103 76 54 79 2 x M10 25 95.0 119.0 155.0 2F-10 B/LSF/LUL 57-64 103 82 54 79 2 x M10 25 89.1 122.5 156.5 2F-11 B/LSF/LUL 64-70 130 89 54 106 2 x M10 15 116.0 157.3 189.0 2F-1200 B/LSF/LUL 70-76 130 95 54 106 2 x M10 15 124.0 167.3 202.0 2F-1201 B/LSF/LUL 76-83 130 100 54 106 2 x M10 10 126.0 170.0 205.0 2F-1202 B/LSF/LUL 83-90 130 108 54 106 2 x M10 10 128.0 172.0 208.0 2F-131 B/LSF/LUL 90-97 150 115 54 126 2 x M10 5 152.0 208.0 248.0 2F-132 B/LSF/LUL 97-105 150 122 54 126 2 x M10 5 156.0 208.0 254.0 2F-141 B/LSF/LUL 105-112 161 130 54 135 2 x M10 5 179.5 238.8 292.0 2F-142 B/LSF/LUL 112-120 169 138 54 143 2 x M10 5 193.5 261.0 315.4 2F-151 B/LSF/LUL 120-128 177 148 54 151 2 x M10 5 212.2 280.0 346.0 2F-152 B/LSF/LUL 128-135 185 158 54 158 2 x M10 5 228.5 304.4 372.4 Two Hole Cableclamp (2F) Data Sheet Manufactured as standard in black polypropylene (B), black flame retardant V0 zero halogen phosphorus free Nylon (LSF) or to special order in a London Underground approved material (LUL).(Material data sheets are available on request). UK Design Reg. No. 355854. Used to fix power cables in indoor and outdoor applications. H mm D mm W mm Part No Material Suffix Cable Dia. Range mm Selection Table for Two Hole Cable Clamps The LUL version of the 2F Two Hole Cableclamps are compliant with the requirement of London Underground Standard 1-085. Product Register No. 364. P mm Dimensions Fixing Hole Pack Qty. Weight g Issue 06 30/08/2011 Page 1 of 2

2. Testing Information Test Data B - Pass Refer to Ellis Patents. -40 to 40 >30 7330 1220 Two Hole Cable Clamps have been tested in line with the International Standard of "Cable Cleats for Electrical Installations" IEC 61914: 2009. Typical results below. Impact Resistance 6.2, 6.3.5, 9.2 Resistance to Electro Mechanical Force (Undertaken at Damstra Laboratories NL) 6.4, 6.4.3, 9.5 Temperature for Permanent Application 6.2 Needle Flame Test 10.0, 10.1 Lateral Load Test 9.3 Axial Movement Test 9.4 6.1, 6.1.3Cleat Type IEC 61914:2009 Classification Clause Properties Units / Classification LSF Non Metallic >120 Newtons (N) Newtons (N) Non Metallic Units / Classification B Very Heavy Classification (>6.7kg @ kA @ 600mm Centres. 4 Core SWA Cable (3 cores used) oC Application Time (seconds) Very Heavy Classification (>6.7kg @ Refer to Ellis Patents. oC Application Time (seconds) Newtons (N) Newtons (N) Issue 06 30/08/2011 Page 2 of 2 18400 1200 Test Data LSF - Pass 76 Peak (Report No. PDL-10.150) -40 to 60

Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm

Similar to Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm (20)

More from Thorne & Derrick International

More from Thorne & Derrick International (20)

Recently uploaded

Recently uploaded (20)

Ellis Patents 2F Cable Clamp (Two Hole) Range 38 -135mm