This document provides information about Electroserv+, a leading company that provides instrumentation and automation solutions. It summarizes Electroserv+'s 40-year history as a supplier and distributor of process measurement equipment and control systems. It also describes the various engineering, design, project management, and calibration services that Electroserv+ offers to customers across multiple industries.
Kami menyediakan solusi terintegrasi dengan menjual dan mendistribusikan produk-produk berkualitas untuk mendukung pembangunan dan instrumen survei serta uji kit. Kami adalah profesional dan menyediakan produk yang lengkap untuk Anda.
Informasi Produk & Harga Hubungi :
4 Store
Surveying & Testing Equipments
Jl Joglo Raya Jakarta Barat
081 282 535 818
Practical Control Valve Sizing, Selection and MaintenanceLiving Online
THE WORKSHOP
It is claimed that the majority of control valves throughout the world have not been correctly sized and that large numbers operate on manual mode. Whether this is true or not is difficult to establish but we do know that the method of sizing and selecting a control valve for a specific application is generally not well understood. Although there are many factors that need to be taken into account the subject is not difficult to understand if dealt with in a logical manner.
Many maintenance problems result from people treating the symptoms of a problem rather than tackling the true cause – a basic understanding of the principles is all that is usually needed to solve the problem for good. This practical, hands-on workshop is designed to maximise knowledge retention and understanding. It provides an opportunity for participants to discuss with the presenter and others, specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the material presented; therefore minimal note taking is encouraged to ensure maximum delegate participation and attention.
WHO SHOULD ATTEND?
Consulting engineers
Control valve specialists
Electrical engineers
Instrumentation and control engineers and technicians
Maintenance engineers, technicians and planners
Plant safety specialists
Process control engineers
Project engineers
Systems engineers
www.idc-online.com/content/practical-control-valve-sizing-selection-and-maintenance-52?id=6897
The placement of gas detectors has traditionally been an imprecise field of engineering. With no detailed prescriptive rules on when and where to place gas detection equipment, designs have been left to experts who use their judgment along with rules of thumb to set designs. These ad hoc methods have left industry in a position where different process units within the same refinery have vastly different gas detection designs for equipment in similar operating profiles. Furthermore, often no documented basis for the selection exists making it difficult to justify the differences in designs between units to stakeholders and regulators.
In 2011, ISA released a technical report describing performance based methods for fire and gas system (FGS) design. This technical report laid out a safety lifecycle and introduced the new metric of “coverage” to define FGS designs. The approach presented in ISA TR84.00.07 was applied to the problem of H2S gas detection on a refinery Sulfur Recovery unit. All of the process equipment was assessed using calibrated semi-quantitative techniques, resulting in graded areas with associated coverage targets. Fire and gas mapping software was then utilized to confirm that the assigned coverage targets were achieved. This paper describes how that project was executed, presents an overview of the results, and compares the resulting design against other process units and expectations.
Intertek provides quality and safety services that not only help customers provide quality products and services but also adds value to their business.
We deliver these services through our global network and as a result have developed an unrivalled reputation for fast execution of work.
Kami menyediakan solusi terintegrasi dengan menjual dan mendistribusikan produk-produk berkualitas untuk mendukung pembangunan dan instrumen survei serta uji kit. Kami adalah profesional dan menyediakan produk yang lengkap untuk Anda.
Informasi Produk & Harga Hubungi :
4 Store
Surveying & Testing Equipments
Jl Joglo Raya Jakarta Barat
081 282 535 818
Practical Control Valve Sizing, Selection and MaintenanceLiving Online
THE WORKSHOP
It is claimed that the majority of control valves throughout the world have not been correctly sized and that large numbers operate on manual mode. Whether this is true or not is difficult to establish but we do know that the method of sizing and selecting a control valve for a specific application is generally not well understood. Although there are many factors that need to be taken into account the subject is not difficult to understand if dealt with in a logical manner.
Many maintenance problems result from people treating the symptoms of a problem rather than tackling the true cause – a basic understanding of the principles is all that is usually needed to solve the problem for good. This practical, hands-on workshop is designed to maximise knowledge retention and understanding. It provides an opportunity for participants to discuss with the presenter and others, specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the material presented; therefore minimal note taking is encouraged to ensure maximum delegate participation and attention.
WHO SHOULD ATTEND?
Consulting engineers
Control valve specialists
Electrical engineers
Instrumentation and control engineers and technicians
Maintenance engineers, technicians and planners
Plant safety specialists
Process control engineers
Project engineers
Systems engineers
www.idc-online.com/content/practical-control-valve-sizing-selection-and-maintenance-52?id=6897
The placement of gas detectors has traditionally been an imprecise field of engineering. With no detailed prescriptive rules on when and where to place gas detection equipment, designs have been left to experts who use their judgment along with rules of thumb to set designs. These ad hoc methods have left industry in a position where different process units within the same refinery have vastly different gas detection designs for equipment in similar operating profiles. Furthermore, often no documented basis for the selection exists making it difficult to justify the differences in designs between units to stakeholders and regulators.
In 2011, ISA released a technical report describing performance based methods for fire and gas system (FGS) design. This technical report laid out a safety lifecycle and introduced the new metric of “coverage” to define FGS designs. The approach presented in ISA TR84.00.07 was applied to the problem of H2S gas detection on a refinery Sulfur Recovery unit. All of the process equipment was assessed using calibrated semi-quantitative techniques, resulting in graded areas with associated coverage targets. Fire and gas mapping software was then utilized to confirm that the assigned coverage targets were achieved. This paper describes how that project was executed, presents an overview of the results, and compares the resulting design against other process units and expectations.
Intertek provides quality and safety services that not only help customers provide quality products and services but also adds value to their business.
We deliver these services through our global network and as a result have developed an unrivalled reputation for fast execution of work.
Taxi Proxi is a taxi network system starts in France in 2013. Now it is available in all the United Kingdom. We offer for taxis 3 services to improve their business.
1- Advertisement on the official website www.taxiproxi.uk to helps you get more bookings.
2- The application Taxi proxi to receive/accept bookings and manage you business.
3- The driver is personal website to represent your taxi trade.
ServeGas, an ICV and ISO-certified organization headquartered in Doha, Qatar, stands as a beacon of excellence. Renowned for our comprehensive turnkey strategies within the energy and process industry, we have consistently delivered solutions with unwavering honour and immense pride throughout Qatar.
Inspection, Testing and Commissioning of Electrical Switchboards, Circuit Bre...Living Online
THE WORKSHOP:
Whether you are designing, specifying, installing, testing or commissioning electrical equipment from small to large commercial and industrial installations, you need to have a thorough understanding of switchboards, switchgear, circuit breakers and associated protective relays.
The overall focus of this workshop is on electrical inspection, testing and commissioning and will commence with a detailed examination of switchgear (and circuit breakers). Circuit breakers are critical components in electrical distribution systems and their operation significantly affects the overall operation of the system. Protection relays are then discussed. These are used in power systems to maximise continuity of supply and are found in both small and large power systems from generation, through transmission, distribution and utilisation of power in plant, industrial and commercial equipment.
We cover commissioning and periodic inspection of cables and their various failure modes and how to detect these faults. The often neglected topic of switchboards will be detailed next, followed by the interesting topic of interfacing to the control system (either PLC’s or other control devices).
Case studies and practical sessions are used throughout to illustrate key practical principles.
This workshop covers key elements in a practical and project focused way. Many people assume (wrongly) that inspecting, testing and commissioning is a fairly straightforward process and is simply a rubber stamp confirmation of a so-called outstanding design. Our experience in the field demonstrates quite the opposite; where the litany of problems ranges from design and installation errors to equipment manufacturing defects. It is best that these problems are identified and corrected before the inevitable downtime comes in an operational installation where many thousands of dollars are lost in correcting the faults. The situation today is made more challenging by the heightened safety requirements and interfacing to low powered electronic control and monitoring devices (such as PLC’s) using software that has to also be verified.
Modern enduring design and Automation Engineering Company that emphasizes speed, strength, and ferocity. Our prowess and aptitude are only equaled by our speed and power. We believe no task is too large and no dream to ambitious.
We specialize in the Design, Consulting, Installation, Fabrication and Maintenance of Switchgears and Distribution Boards, IT Infrastructure Solutions, Energy Management & Metering Solutions, and Solar Applications etc.
Rsd engineering steam, superheated water and ethylene oxide (eto) steriliza...cathy fernandez rendo
RSD Engineering Solutions is a company with a huge and large experience in the sterilization field.
We offer several services focused on Sterilization:
*Sterilization consultancy
*Design for equipment manufacturing (sterilizers, vacuum chambers,…)
*Contract Ethylene Oxide sterilization services
2. www.electroserv.co.uk
OUR HERITAGE
Electroserv+ is a leading
company for instrumentation
and automation solutions.
We have a 40-year heritage as one of the UK’s
premier stockists and distributors for high
quality process measurement equipment and
control systems. Our reputation is built on
excellent technical support and quick deliveries
as an integral part of customer service.
With so many years’ experience in designing,
specifying, installing, commissioning and
calibrating field instrumentation, the
Electroserv+ team can create bespoke solutions
from a single loop to a global project.
Electroserv+ offers full project management
services and has extensive experience
of working with sites requiring control of
major accident hazard (COMAH), dangerous
substance and explosive atmosphere
regulations (DSEAR), hazard and operability
studies (HAZOP) and safety instrumented
systems (SIS).
www.electroserv.co.uk
www.electroserv.co.uk
Electr0serv @Electr0serv Electr0serv 32 Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk2
Buy online 24/7
Purchasing temperature and process control
instrumentation from our website couldn’t be
easier. Our website also offers:
• Instant and up-to-date information on how many items
are in stock
• The ability to spec your instrument online to get an
accurate price
• The ability to configure your products online
• Downloadable brochures and manuals
Industry Leading Brands
BRANDS DISTRIBUTED
We work with the leading global specialists in temperature and process
control instrumentation. Our comprehensive product portfolio includes
single and multi-loop controllers, limit devices, indicators and transmitters
together with recorders and tools for data acquisition.
We distribute the best products to deliver accuracy, stability,
reliability and quality, making them particularly suitable for
applications requiring high levels of precision.
Take advantage of the following services
• Calibration
• Service contracts
• FREE one hour configuration on
many products
• FREE site consultation visit
Find out more - contact our team today
1985481
TODAYE482
Designing, specifying,
installing, commissioning
and calibrating
3. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 54
Key Industries & Sectors
Aerospace &
Automotive
Whether heat-treating a wing-nut or
a full wing for an A380, temperature
and system accuracy are of
paramount importance.
In addition to designing and
installing temperature and
pressure control and recording
systems, complete with calibration
and certification, we conduct
Temperature Uniformity Surveys
(TUS) and System Accuracy Tests
(SAT) to meet the major aerospace
specifications, such as AMS2750E,
RPS 953 and BAERD GEN-007.
We are happy to offer a site
presence during customers NADCAP
audits to make the process a lot
less stressful.
Food & Beverage
We understand the importance
of efficient validation and help
our clients reduce the costs and
complexity of implementation in
accordance with food & beverage
industry regulations.
Our controllers and recorders are
designed to give manufacturing
processes measured value for
money.
Our expertise in the automation
of processes, control, secure data
recording and supervision at all
levels is reflected in our systems.
Petro-Chemical &
Fine Chemicals
We have 20 years’ experience in procuring,
installing and commissioning bespoke
instrumentation using our expertise in control,
automation and measurement technology to
guarantee the best performance.
Electroserv+ works closely with clients to
provide temperature, pressure, level and flow
instrumented systems to achieve the optimum
conditions for safe, efficient and profitable
production.
Our team is trained to have a high level of safety
culture; all our personnel carry a CCNSG safety
passport and receive regular safety training.
We have engineers with basic offshore safety
induction and emergency training (BOSIET).
Pharmaceutical
Having gained a practical
understanding of good
manufacturing practices (GMP)
and good laboratory practice
(GLP) from working with
customers for many years within
the Pharmaceutical industry, we
are an ideal partner for your on-
site calibration needs.
Whether it’s a full environmental
monitoring system (EMS) or
an individual instrument, bath,
chamber, sterilizer or oven, we
work in close partnership with
our customers to ensure that
the measurement techniques
we employ and the certificates
we supply are always accessible,
meaningful, fit for purpose and
complement a customer’s quality
management system (QMS).
Ceramics & Clay
From brickwork and minerals to
tableware, sanitaryware & advanced
ceramics, temperature, humidity and
pressure play a critical role in the
manufacturing process.
We design, install and calibrate
temperature control systems for
ovens, kilns, driers and laboratories.
We specify and
install measurement
and control
instrumentation
systems across
a variety of sectors.
Aerospace | Automotive
Ceramics | Clay
Composites | Food &
Beverage | Brewery &
Distillation | Packaging
Petro-Chemical | Power
4. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 76
Product and Services Portfolio
Engineering
Management
Engineering
Design
Budgeting
Construction
Commissioning
Resourcing
Motor Control
Design
Commissioning
Power Loading
Cable Running
Function Testing
Installation
Inspection
Design
Commissioning
Installation
Specification
Procurement
Loop Design
Profibus Design
Project Electrical Instrumentation
Calibration
Control Systems
Data Acquisition
Field Devices
SCADA
Comms Protocols
Panel Builds
Temperature
Uniformity Surveys
ATEX Inspections
Maintenance
Breakdown Cover
Safety Work Switches
Pressure
Flow
Humidity
Analytical
Temperature
ATEX I/O
Eurotherm Range
West Range
Controllers
Recorders
Limit Devices
Signal Conditioners
Indicators
Solid State Relays
Thyristors
I.S Barriers
Site Services DiscreetField Devices
DCS
Knowledge
FOXBORO
Partnership
Design
Start up support
PLC
Automation
We can combine our engineering services
with equipment distribution to offer a
complete proposal, creating a lifecycle of
support for your process requirements.
Simon Fisher, Electroserv+ Director
Equipment
5. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 98
Control Equipment Data Acquisition
In 2015 we launched our latest controller, the E482.
With a selection of outputs, on board communications
and a wipe down front the E482 is suitable for a range
of applications.
WELCOME TO THE E482
We work with the leading global specialists in
measurement and instrumentation for process
control applications and offer our customers a
comprehensive range of controllers and
alarm units.
With over 40 years of control expertise,
Electroserv+ offers you full support from
technical pre-sales advice to full commissioning
services. We recognise that sometimes you need
people who understand your process and control
requirements to help you make the right choices.
Our team is with you every step of the way.
We offer automatic self-tune to calculate
optimum PID parameters - reducing your
engineering time and providing straight line
control response.
When you order a proportional-integral-derivative
(PID) controller from Electroserv+ you can
specify what you need - input types, control
functions and output signals - and we will ship the
instrument to you pre-configured so you can use
it straight out of the box.
We supply a wide range of products for data recording,
archiving, and management.
Data collection is often required for compliance with industry
regulations, particularly in Heat Treatment (AMS2750) and
Life Sciences (21 CFR).
A data recorder provides secure data storage and easy
access to process records.
We offer recorders
with a vast array of
hardware and software
options, all of which
can be added in the
field as and when you
need them.
Supporting software
enables you to
configure on or offline,
remotely view real time
data, create historical
charts and application
specific reports.
• Calibration
• Service contracts
• FREE site consultation visit
• FREE one hour
configuration on
many products
Take advantage of the following services
Full range
available to buy
online today:
www.electroserv.co.uk
Find out more - contact our team today
6. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 1110
Our prices are competitive and sustainable.
Various payment options are available,
including credit/debit card or a business
credit account.
We offer a fast manufacture service and
stock thousands of products which are
available for immediate dispatch. We can
also stock finished products for you to
call-off as required, or to be dispatched on
scheduled dates.
We stock numerous types of Thermocouple
cable. Our vast range includes single and
multi-pairs ranging from two to twenty-four
pairs. We offer cables with heat resistant
PVC, flame retardant PVC, XLPE / LSZH, Mica /
XLPE / LS0H, PFA / PTFE, fibreglass or silicone
rubber insulation. Bespoke cables can usually
be manufactured or adapted quickly, and can
be supplied in small or large quantities to suit
your application requirements.
Our distributed products have a record of
dependability. This is the cornerstone of our new
best-in-class warranty coverage that provides a
full five year warranty as standard.
In addition, our premium performance and
multi-range transmitters are available with an
industry-leading 17 year warranty.
We manufacture thermocouples
and RTDs across the spectrum (T, K,
J, R, S & B) and can advise which are
most suitable for plastics machinery
applications, heat treatment furnaces,
glass furnace control, food processing
equipment, laboratories, industrial
ovens, and a variety of temperature
sensing applications.
The best sensors distinguish real
values from signal noise. Combine
this with the advanced PID algorithms
of the control equipment we offer to
get optimum closed loop response.
We consistently provide the best
solutions, quality products and the
highest level of customer service.
Our quality system is approved to
ISO9001:2008.
Sensing & Measurement Process Equipment
Take advantage of the following services
• Calibration
• Service contracts
• FREE one hour configuration on many products
• FREE site consultation visit
Find out more - contact our team today
We provide sensing and
measurement equipment with the
features you need to keep control of the
most difficult of processes. Our experienced
advisors will work with you and suggest the best
solution for your application and budget.
LEVELINFRA RED SENSING
FLOW
GAUGES
TRANSMITTERS
Innovative technology ensures our cost-effective
transmitters will handle even the most demanding
applications and will integrate into existing process
control systems across a variety of industries from:
We supply reliable, accurate equipment and
software for every step of process automation:
• Gauges
• Absolute, differential
pressure and multivariable
transmitters
• A range of process
connections
• Heat treatment
• Oil & gas
• Pharmaceutical
• Power
• Temperature
• Pressure
• Flow
• Corrosion resistant
materials
• Performance levels
• Digital
communication
protocols
• Chemical
• Pulp & paper
• Metals & mining
• Water & wastewater
plus many others
• Humidity
• Level
We offer:
7. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 1312
Proven Turnkey Solutions
We work across a variety of sectors from
aerospace and automotive to ceramics, food
& beverage, petro/fine chemical and power.
Projects range from commissioning a 3000 I/O
wheat plant to developing a paper manufacture
process and an anaerobic digestion plant.
Our project management engineers take care
of any or every element of a project from the
pre-engineering stage, to specifying equipment,
implementing new technology and project
construction managing. We will take care of every
detail from face to face meetings with suppliers,
to collating reports and preparing for gate
reviews, ensuring that your projects are delivered
on time and on budget.
Electroserv+ offers a complete package to
solve even the most complicated engineering
challenges. Whether you’re building a new
plant or upgrading an existing process, our
team provides an end-to-end solution including
every aspect of engineering services and
equipment.
We operate as an extension of your team
providing experienced, senior engineers to
project manage engineering projects from initial
scoping and feasibility studies to development,
planning, implementation and execution.
Many of our clients
have worked with us for
more than 10 years.
We are one of the few companies to
offer engineers with basic offshore
safety induction and emergency
training (BOSIET), essential for the
offshore oil and gas industries. We
also provide specialists in the field
of explosive atmospheres (ATEX) and
dangerous substance and explosive
atmosphere regulations (DSEAR).
“
“
“
“
8. www.electroserv.co.ukwww.electroserv.co.uk
Contact us to find out more: +44 (0)1625 618526 sales@electroserv.co.uk Electr0serv @Electr0serv Electr0serv 1514
Service, Calibration & Inspection
Calibration of your process
equipment will ensure that your
application is working at the
optimum point of production.
Calibration discovers measurement errors,
detects non-conforming instruments and
allows you to address a root cause of
product quality problems.
We can offer on-site calibration of
Temperature Probes from -35 to 1100⁰C
and Humidity Probes from 0-100%rh.
We provide calibration services for any
make and model of instrumentation from
any supplier as a one-off service or we offer
service contracts from one to five years.
Calibration can be carried out on-site or we
can collect equipment to take off-site at our
accredited laboratory.
Inspections
Electroserv+ inspection services are available
for new plants requiring initial verification or
existing works needing periodic inspection.
We perform the following services:
• DSEAR gap analysis
• DSEAR risk assessment
• DSEAR hazardous area classification
• Instrumentation specification /
equipment verification
• BS EN 60079-17 DSEAR inspections
• Retrospective documentation collation
• Bespoke DSEAR awareness courses
• Project management / consultancy
• Quality assurance schemes
Our inspectors are highly trained in
hazardous environments (BS EN 60079-17).
We provide a comprehensive handover pack
detailing inspection schedules and providing
an inspection summary report advising
corrective actions where necessary.
Electroserv+ is here to help you keep your
plant compliant and safe.
Services available include:
• Installation and commissioning
• Accreditation, including Thermal
Uniformity Surveys (TUS) and System
Accuracy Tests (SAT)
• Extended warranties offered; up to five
years on new equipment
• Breakdown response to site with
enhanced cover including 24/7 call-out
• Off-site archiving and storage
of instrument configurations to
ensure swift recovery in the event of
equipment failure
• Technical support days to provide
modifications, informal training etc.
• Training on our range of
instrumentation and software
As part of your Electroserv+ service and
calibration contract:
• You will receive unique login details to
a dedicated online portal
• Access up-to-date information on the
status of your calibration schedule
• See historical and current calibration
records, audits, accreditation and
certification
For more information call our
calibration services team on
+44 (0) 1625 618526
Or email
support@electroserv.co.uk
Client portal -
Instant access to
your calibration
information...
Emergency response team to
deal with system breakdowns
