When you are trying to start your car in a hurry and put the key in the ignition, it may be brake and stuck in the ignition system. People often thought that there is no other way to remove the broken key from the ignition. You can easily remove the stuck key from the ignition system of your car by using the right set of household tools and equipment without affecting the ignition. If you don't know the effective way to remove the broken key from the ignition then go through the given slides. It can elaborate the most effective methods to perform the task in an easy manner.

1. Effective Methods to Remove the
Broken Key from the
Ignition

2. If you are very late for your work and
turn the key of your car quickly or hard
in the ignition, then the key of your car
can break and stuck into the ignition.

3. People often get worried and thought
that there is no way to get the key out
of the ignition.

4. So, be calm, this is just a rumor spread
by the people. Yes, it's possible to
remove the key from the ignition.

5. Make sure that you are using the
suitable kind of household tools and
equipment to remove the key without
affecting the ignition.

6. Here the following points will help you to remove the broken key from
your ignition in a simple way.
Using a plier Using a coated wire Using a hacksaw Using cooking spray

7. Using a
plier

8. If the broken key is sticking out of the
ignition, then you can use a plier to
latch onto the keys and pull them out.

9. To grip the key piece using a plier,
you need to apply some glue, melted
wax in the tool's tip and wait until the
glue set a little bit.

10. Then, with the plier latch onto the key
pieces and pull the key out. You can
use the cotton swabs and acetone to
unglue the plier.

11. Using a coated
wire

12. If you are unable to get the key out of
your car ignition with the plier, then try
to use some coated wire hanger to
remove it.

13. You can bring a 6 to 8 inch coated wire
hanger and shape one end of the wire
hanger with the help of pliers into a
hook.

14. Then insert the wire hook into the car's
ignition either behind or front of the
broken car key to pull the pieces out.

15. Using a
hacksaw

16. If you can't grip your stuck key with
pliers or a coat hanger, then put your
ignition in the neutral position.

17. Put the hacksaw blade upward beside
the broken in the ignition, then turn the
ignition. After that pull the hacksaw
blade carefully.

18. The hacksaw blades grab onto the
front or back of the key, then latch onto
the groove of the key to pull it out.

19. Using cooking
spray

20. If you are unable to get the key out of
the ignition with the plier, coated wire,
and hacksaw, then apply some cooking
spray inside of the ignition.

21. If you want to use the plier, then don't
apply the cooking spray because it will
make key too slippery and grab by the
ignition.

22. After applying the cooking spray, push
the key out with a hacksaw blade. Try
to wiggle the blade inside of the ignition
to latch on the grooves of the blade.

23. http://oriona2.com/
/orionautomotiveservices