Earth Braid - Flat Tinned Copper - FLTB16
•
0 likes•253 views
This document lists various stainless steel roll springs and earthing components that provide reliable solderless earthing for low and medium voltage systems. It provides specifications for 8 roll spring part numbers including their inner diameter, width, length, and application range. It also lists 6 earthing components such as flat and tubular copper earth straps and socks along with their descriptions, maximum lengths, and cross-sectional areas. Contact information is provided at the end for Thorne & Derrick UK.
Report
Share
Report
Share
Download to read offline
Recommended
CTL Mechanical Connectors
This document provides information on various types of mechanical connectors for electrical cables, including brass, aluminum, and live cable connectors. It lists the connector product codes and applicable core size ranges for straight-through, service branch, and mains branch connectors. Notes provide additional information on some aluminum alloy connectors. Brand and contact information is listed at the bottom.
Case wx240 wheel excavator parts catalogue manual
This document is a parts catalogue for a WX240 wheeled excavator. It lists multiple sections for different parts of the excavator, including the lower carriage, upper carriage, and frames. Each section includes references to part numbers, quantities, and diagrams.
Memcon Contacts cross reference guide
This document is a cross-reference guide listing Nicomatic equivalent part numbers for various Molex crimp contacts. It includes 2.54mm and 1.27mm pitch female and male crimp contacts as well as some solder tab variants. Each Molex part number is listed with its corresponding Nicomatic equivalent to allow for interchanging of similar components between the two manufacturers.
Earthing Stubs
This document provides information on earthing stubs and equipment for substations manufactured by Thorne and Derrick UK. It includes:
1. Details on different types of earthing stubs for aluminium and bronze with varying diameters, lengths, and bolt fixing centers for mounting in substations at voltages from 132kV to 400kV.
2. Instructions for mounting the stubs in stipulated positions in aluminium or copper busbar substations, including the optional use of corona shields on some aluminium stubs.
3. Images and codes for identifying the various earthing stub models along with their suitable applications.
фурнитура для деревянных английских окон
This document provides information on hardware components for timber windows, including brass accessories, weather seals, and guidance on travel stops. It includes diagrams of pivot shoe assemblies, basic kit components, accessories, and positions for BS7950 hardware. The document emphasizes checking the latest issue level, as information is subject to change, and contacting Caldwell Hardware with any questions.
12777 coastal single pages part59
This document provides specifications for the Vental Electric Chain opener including:
- It has adjustable stroke of 100-400mm and central exit of double link chain.
- It has double insulated electrics, simple swivel back plates, and a buzzer to indicate wrong installation.
- Key specifications include 230v voltage, 350N thrust and traction force, 0.32 amp current draw, IP55 protection class, and 1.9kg weight.
Pages from erico catalog
The document provides specifications for braided power shunts produced by ERICO including their flexibility, ability to reduce vibrations, and suitability for connecting transformers and bus ducts. It lists various models of power shunts with their dimensions and electrical ratings at different temperatures. Custom braided power shunts can be produced according to customer specifications and drawings.
Resin Cable Jointing Kit - CM0+C to 4 Core 6sqmm XLPE-EPR
This document provides information on cable joint kits for joining low voltage power cables. It lists the part numbers and components included for basic joint kits and joint kits that include additional mechanical connectors for various cable sizes up to 400 mm2 for both PVC/XLPE insulated cables and armored cables. A quick selection table also allows identifying the suitable joint kit part number based on the number of cable cores and cable size. Basic joints with compression ferrules instead of mechanical connectors are also available.
Recommended
CTL Mechanical Connectors
This document provides information on various types of mechanical connectors for electrical cables, including brass, aluminum, and live cable connectors. It lists the connector product codes and applicable core size ranges for straight-through, service branch, and mains branch connectors. Notes provide additional information on some aluminum alloy connectors. Brand and contact information is listed at the bottom.
Case wx240 wheel excavator parts catalogue manual
This document is a parts catalogue for a WX240 wheeled excavator. It lists multiple sections for different parts of the excavator, including the lower carriage, upper carriage, and frames. Each section includes references to part numbers, quantities, and diagrams.
Memcon Contacts cross reference guide
This document is a cross-reference guide listing Nicomatic equivalent part numbers for various Molex crimp contacts. It includes 2.54mm and 1.27mm pitch female and male crimp contacts as well as some solder tab variants. Each Molex part number is listed with its corresponding Nicomatic equivalent to allow for interchanging of similar components between the two manufacturers.
Earthing Stubs
This document provides information on earthing stubs and equipment for substations manufactured by Thorne and Derrick UK. It includes:
1. Details on different types of earthing stubs for aluminium and bronze with varying diameters, lengths, and bolt fixing centers for mounting in substations at voltages from 132kV to 400kV.
2. Instructions for mounting the stubs in stipulated positions in aluminium or copper busbar substations, including the optional use of corona shields on some aluminium stubs.
3. Images and codes for identifying the various earthing stub models along with their suitable applications.
фурнитура для деревянных английских окон
This document provides information on hardware components for timber windows, including brass accessories, weather seals, and guidance on travel stops. It includes diagrams of pivot shoe assemblies, basic kit components, accessories, and positions for BS7950 hardware. The document emphasizes checking the latest issue level, as information is subject to change, and contacting Caldwell Hardware with any questions.
12777 coastal single pages part59
This document provides specifications for the Vental Electric Chain opener including:
- It has adjustable stroke of 100-400mm and central exit of double link chain.
- It has double insulated electrics, simple swivel back plates, and a buzzer to indicate wrong installation.
- Key specifications include 230v voltage, 350N thrust and traction force, 0.32 amp current draw, IP55 protection class, and 1.9kg weight.
Pages from erico catalog
The document provides specifications for braided power shunts produced by ERICO including their flexibility, ability to reduce vibrations, and suitability for connecting transformers and bus ducts. It lists various models of power shunts with their dimensions and electrical ratings at different temperatures. Custom braided power shunts can be produced according to customer specifications and drawings.
Resin Cable Jointing Kit - CM0+C to 4 Core 6sqmm XLPE-EPR
This document provides information on cable joint kits for joining low voltage power cables. It lists the part numbers and components included for basic joint kits and joint kits that include additional mechanical connectors for various cable sizes up to 400 mm2 for both PVC/XLPE insulated cables and armored cables. A quick selection table also allows identifying the suitable joint kit part number based on the number of cable cores and cable size. Basic joints with compression ferrules instead of mechanical connectors are also available.
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
This document provides information about the manufacturing process for steel tubes at Bhushan Power and Steel Ltd. It begins with an overview of the company and its products. It then describes the tube manufacturing process which involves forming steel strips into tubular shapes and welding the edges. Various quality tests are conducted including hydraulic testing. Tubes may also be galvanized and threaded. Standards that the company's tubes conform to from various countries are listed. Details on specific tube types including dimensions, tolerances and material properties are provided.
Lin tech round_rail_shafting_specsheet
This document provides specifications for SL, SS, SN, and SM series precision shafting. It details shaft material options, diameter tolerances, straightness, roundness, hardness depth, chamfer dimensions, and maximum lengths. Diameter options range from 0.25 to 2 inches (SL/SS/SN series) and 8 to 50 mm (SM series). Material options include 1060 steel and 440C stainless steel. Overall length tolerance is +/- 1/32 inches for most, +/- 1/16 inches for 2 inch diameter shafts.
Lintech catalog
This document provides an overview and technical specifications for various linear motion and positioning components manufactured by LINTECH. It describes their standard product offerings which include precision shafting, shaft supports, shaft assemblies, linear bearings, ball screw assemblies, and standard positioning systems. It also discusses their ability to customize products and designs for specialized customer needs, including multi-axis systems and custom mechanical positioning systems.
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...Thorne & Derrick International
The document is a product catalogue for overhead line equipment. It provides information on various clamps, connectors, and accessories for overhead power lines, including:
- Tap-off clamps for connecting overhead lines made of aluminum, copper, and aluminum-copper combinations.
- Multi-purpose clamps that can be used for connections requiring tensile strength transmission.
- Dead-end clamps for anchoring overhead lines.
- Split bolt connectors, earth connection clamps, surge arresters, and other accessories.
Detailed specifications like materials, dimensions, and type numbers are provided for each product.Raccordi per alte pressioni - Fitok serie 60
Raccordi per alte pressioni - Fitok serie 60GIGA TECH SRL - Distribuzione componenti per impianti di processo
This document provides information on 60 Series tube fittings and tubing from FITOK Group. It includes details on features, materials, working pressures, dimensions and specifications for various fitting types including unions, elbows, tees, crosses, plugs, caps and more. It also lists contact information for FITOK Group locations worldwide.DIN-RAILS-Manufacturer-and-Supplier-In-India.pdf
A Din Rail (Mounting Rail) a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside the equipment racks. The design of Trinity Touch Din Rails (Mounting Rails) complies with European standard EN 60715.
Trinity Touch Din Rails (Channels) are zinc plated & chromate passivated.
Trinity Touch Din Rails (MCB Channels) are available in perforated & Un-perforated.
Trinity Touch Din G Rail (Terminal Channel) is available in slotted & Un-slotted version. Profile Cutter used for cutting standard Din Rails, G Rails 32/15, Din Rails 35/7.5, Din Rail 35/15, Din Rails 15/5.5 and neutral busbars NLS-CU 3/10. Trinity Touch Timers and Interface Modules are designed to be mounted on Din Rails (Channels) that can be fixed easily on panel boards and other equipment. All Trinity Touch Din Rail series TBLS, TDR2 & TDR3 are also available cut to length.
We Serve Delhi NCR, Mumbai, Pune, Chennai, Ahmedabad, Bengaluru, Hyderabad, Kolkata and all other major locations in India.
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools.
Founded in 1981, MECATRACTION quickly grew both in the domestic market and export markets. We are based in Pompadour, France, in premises of more than 8100 m2. MECATRACTION designs, develops and produces a complete range of components for industrial electrical connections.
MECATRACTION is a subsidiary of the Sicame group.
The Sicame group specializes in accessories for the transport and the transmission of electrical power.
MECATRACTION has forged a position for itself in many sectors of industry that demand know-how, precision and efficiency through the quality of our products and our capacity for innovation.
These sectors include the rail, automotive, aeronautic, space, nuclear, renewable energies, shipping and defence industries
A complete range of products:
Insulated and non insulated terminals
End sleeves
Earthing connections and mechanical connectors
Copper tubular lugs and butt connectors
Cable ties and accessories
Heat-shrink tubing
Tooling and accessories
1.5 fx6cblkflx100
This document provides specifications for single core and multicore flexible cables produced by Finolex for overseas markets. It includes tables listing the technical specifications of various cable types, sizes, and standards they conform to. The cables can be used for applications like UPS cabling, submersible pump wiring, and power distribution. Finolex offers a wide range of cable options that meet various international standards.
Earthing and Lightning Protection Accessories
Flare Electricals manufactures complete range of accessories for earthing and lightning protection system. An earthing and lightning protection system protects structures against destruction caused by lightning. A good earthing and lightning protection system consists of air termination network, down conductors, and earth termination network. Air termination network protects the structure by capturing lightning current and dissipating it to the ground. Down conductors provide the path for lightning current to pass from air termination network to ground. An earthing termination network dissipates the electric current safely to the ground.
Vantrunk Cable-Tray System
Vantrunk manufactures a full range of perforated cable tray products to high standards. Their cable tray system offers adaptable designs, practical slot patterns, and versatile accessories. It provides flexible solutions and rapid installation for withstanding extreme temperatures from -50°C to +50°C. Vantrunk's cable tray system includes straight lengths, fittings, covers, and accessories made of durable materials like galvanized steel.
Pipe fitting . in Pipes and tubes manufatuers, supplier, dealer in mumbai ,i...
This document provides information on various stainless steel products including tubes, pipes, and sections. It lists the chemical compositions, mechanical properties, specifications, and grades of different stainless steel materials. Key details include outside diameter and wall thickness ranges, available lengths, common grades according to international standards, supply conditions, and applications in various industries.
Npm l250 specsheet
1) The document provides specifications for the Nippon Pulse L250 linear shaft motor, including its electrical specifications, thermal specifications, force characteristics, and dimensions.
2) It lists specifications for continuous and peak force, current, resistance, inductance, and other electrical parameters. Thermal specifications include maximum phase temperature and thermal resistance.
3) Force-duty curves are provided graphing force and duty cycle at different temperatures to show the motor's force capabilities over time at various loads. Physical dimensions listed include forcer length, screw pitch, shaft length, stroke length, and tolerances.
Catalogue bec han
The document discusses the TOUGH LOCK consumable series for MIG welding. It describes how the dual taper technology and increased surface contact area between components keeps temperatures lower, reducing wear and extending component life. It then provides specifications on the retaining heads, contact tips, nozzles, and other components available in standard duty and heavy duty options for a range of wire sizes and applications.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Lintech ball screw_gs062series_specsheet
This document provides an ordering guide and specifications for the GS series of precision lead screws. It includes:
1) An overview of the GS series part numbering system which specifies features like screw diameter, lead, nut type, motor mount, and thread length.
2) Tables listing specifications for each screw model like diameter, lead, load capacity, efficiency, repeatability and more.
3) Diagrams showing available configurations, overall length dimensions, and performance charts for maximum load, speed and travel life.
Hydra Solid Carbide Replaceable Head Drills
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...Thorne & Derrick International
The document provides product information for heatshrink cable terminations and joints for voltages ranging from 0.6kV to 36kV. It lists various indoor and outdoor termination part numbers corresponding to cable type (XLPE, PILC), cores (single, three), voltage rating and cable cross section range. It also provides information on related accessories like earthing components and ordering guidelines. Coldshrink terminations are introduced as an alternative with advantages like easier installation without open flames. Technical test standards for heatshrink products are listed at the end.Insulated Tools (IEC 60900) for Low Voltage Live Line Working
This document provides specifications for various insulated hand tools rated for use at voltages below 1,000V, including:
- Screwdrivers in various sizes with flat or pozidriv/Phillips heads
- Pliers, cutters, and wire strippers of various styles and sizes
- Open-end spanners, adjustable spanners, hex key wrenches, and socket wrench sets in various sizes
Each tool is made of specialized materials and tested to ensure insulation and durability up to 10,000 volts. Strict quality control procedures are followed to maintain insulation integrity on each tool.
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem Saudi Arabia Ltd. High Voltage , Medium Voltage & Low Voltage Cable Joints, Termination Kits & Heat Shrinkable Tubing
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
This document provides specifications for various models of stainless steel cable ties from the MBT series. It lists the width, length, maximum bundle diameter, material, packaging, and product codes for each tie size. The ties are made of stainless steel 304 or 316 and are designed for use in harsh and corrosive environments. They provide high strength, reliability, and fire resistance. Some models have additional features like double wrapping or polyester coating.
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.More Related Content
Similar to Earth Braid - Flat Tinned Copper - FLTB16
BHUSHAN STEEL.pdf BROCHURE FOR STEEL TABLE
This document provides information about the manufacturing process for steel tubes at Bhushan Power and Steel Ltd. It begins with an overview of the company and its products. It then describes the tube manufacturing process which involves forming steel strips into tubular shapes and welding the edges. Various quality tests are conducted including hydraulic testing. Tubes may also be galvanized and threaded. Standards that the company's tubes conform to from various countries are listed. Details on specific tube types including dimensions, tolerances and material properties are provided.
Lin tech round_rail_shafting_specsheet
This document provides specifications for SL, SS, SN, and SM series precision shafting. It details shaft material options, diameter tolerances, straightness, roundness, hardness depth, chamfer dimensions, and maximum lengths. Diameter options range from 0.25 to 2 inches (SL/SS/SN series) and 8 to 50 mm (SM series). Material options include 1060 steel and 440C stainless steel. Overall length tolerance is +/- 1/32 inches for most, +/- 1/16 inches for 2 inch diameter shafts.
Lintech catalog
This document provides an overview and technical specifications for various linear motion and positioning components manufactured by LINTECH. It describes their standard product offerings which include precision shafting, shaft supports, shaft assemblies, linear bearings, ball screw assemblies, and standard positioning systems. It also discusses their ability to customize products and designs for specialized customer needs, including multi-axis systems and custom mechanical positioning systems.
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...Thorne & Derrick International
The document is a product catalogue for overhead line equipment. It provides information on various clamps, connectors, and accessories for overhead power lines, including:
- Tap-off clamps for connecting overhead lines made of aluminum, copper, and aluminum-copper combinations.
- Multi-purpose clamps that can be used for connections requiring tensile strength transmission.
- Dead-end clamps for anchoring overhead lines.
- Split bolt connectors, earth connection clamps, surge arresters, and other accessories.
Detailed specifications like materials, dimensions, and type numbers are provided for each product.Raccordi per alte pressioni - Fitok serie 60
Raccordi per alte pressioni - Fitok serie 60GIGA TECH SRL - Distribuzione componenti per impianti di processo
This document provides information on 60 Series tube fittings and tubing from FITOK Group. It includes details on features, materials, working pressures, dimensions and specifications for various fitting types including unions, elbows, tees, crosses, plugs, caps and more. It also lists contact information for FITOK Group locations worldwide.DIN-RAILS-Manufacturer-and-Supplier-In-India.pdf
A Din Rail (Mounting Rail) a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside the equipment racks. The design of Trinity Touch Din Rails (Mounting Rails) complies with European standard EN 60715.
Trinity Touch Din Rails (Channels) are zinc plated & chromate passivated.
Trinity Touch Din Rails (MCB Channels) are available in perforated & Un-perforated.
Trinity Touch Din G Rail (Terminal Channel) is available in slotted & Un-slotted version. Profile Cutter used for cutting standard Din Rails, G Rails 32/15, Din Rails 35/7.5, Din Rail 35/15, Din Rails 15/5.5 and neutral busbars NLS-CU 3/10. Trinity Touch Timers and Interface Modules are designed to be mounted on Din Rails (Channels) that can be fixed easily on panel boards and other equipment. All Trinity Touch Din Rail series TBLS, TDR2 & TDR3 are also available cut to length.
We Serve Delhi NCR, Mumbai, Pune, Chennai, Ahmedabad, Bengaluru, Hyderabad, Kolkata and all other major locations in India.
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools.
Founded in 1981, MECATRACTION quickly grew both in the domestic market and export markets. We are based in Pompadour, France, in premises of more than 8100 m2. MECATRACTION designs, develops and produces a complete range of components for industrial electrical connections.
MECATRACTION is a subsidiary of the Sicame group.
The Sicame group specializes in accessories for the transport and the transmission of electrical power.
MECATRACTION has forged a position for itself in many sectors of industry that demand know-how, precision and efficiency through the quality of our products and our capacity for innovation.
These sectors include the rail, automotive, aeronautic, space, nuclear, renewable energies, shipping and defence industries
A complete range of products:
Insulated and non insulated terminals
End sleeves
Earthing connections and mechanical connectors
Copper tubular lugs and butt connectors
Cable ties and accessories
Heat-shrink tubing
Tooling and accessories
1.5 fx6cblkflx100
This document provides specifications for single core and multicore flexible cables produced by Finolex for overseas markets. It includes tables listing the technical specifications of various cable types, sizes, and standards they conform to. The cables can be used for applications like UPS cabling, submersible pump wiring, and power distribution. Finolex offers a wide range of cable options that meet various international standards.
Earthing and Lightning Protection Accessories
Flare Electricals manufactures complete range of accessories for earthing and lightning protection system. An earthing and lightning protection system protects structures against destruction caused by lightning. A good earthing and lightning protection system consists of air termination network, down conductors, and earth termination network. Air termination network protects the structure by capturing lightning current and dissipating it to the ground. Down conductors provide the path for lightning current to pass from air termination network to ground. An earthing termination network dissipates the electric current safely to the ground.
Vantrunk Cable-Tray System
Vantrunk manufactures a full range of perforated cable tray products to high standards. Their cable tray system offers adaptable designs, practical slot patterns, and versatile accessories. It provides flexible solutions and rapid installation for withstanding extreme temperatures from -50°C to +50°C. Vantrunk's cable tray system includes straight lengths, fittings, covers, and accessories made of durable materials like galvanized steel.
Pipe fitting . in Pipes and tubes manufatuers, supplier, dealer in mumbai ,i...
This document provides information on various stainless steel products including tubes, pipes, and sections. It lists the chemical compositions, mechanical properties, specifications, and grades of different stainless steel materials. Key details include outside diameter and wall thickness ranges, available lengths, common grades according to international standards, supply conditions, and applications in various industries.
Npm l250 specsheet
1) The document provides specifications for the Nippon Pulse L250 linear shaft motor, including its electrical specifications, thermal specifications, force characteristics, and dimensions.
2) It lists specifications for continuous and peak force, current, resistance, inductance, and other electrical parameters. Thermal specifications include maximum phase temperature and thermal resistance.
3) Force-duty curves are provided graphing force and duty cycle at different temperatures to show the motor's force capabilities over time at various loads. Physical dimensions listed include forcer length, screw pitch, shaft length, stroke length, and tolerances.
Catalogue bec han
The document discusses the TOUGH LOCK consumable series for MIG welding. It describes how the dual taper technology and increased surface contact area between components keeps temperatures lower, reducing wear and extending component life. It then provides specifications on the retaining heads, contact tips, nozzles, and other components available in standard duty and heavy duty options for a range of wire sizes and applications.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Lintech ball screw_gs062series_specsheet
This document provides an ordering guide and specifications for the GS series of precision lead screws. It includes:
1) An overview of the GS series part numbering system which specifies features like screw diameter, lead, nut type, motor mount, and thread length.
2) Tables listing specifications for each screw model like diameter, lead, load capacity, efficiency, repeatability and more.
3) Diagrams showing available configurations, overall length dimensions, and performance charts for maximum load, speed and travel life.
Hydra Solid Carbide Replaceable Head Drills
Dormer Interchangeable solid carbide head drills for high performance machining of steels, stainless steels and cast iron. Proven in drilling structural steel beams used in the construction industry. One of the most reliably accurate interchangeable head drills available. Fail-safe head location can be changed without ejecting the drill from the machine. Available with coolant feed across the full range and a choice of HSS bodies to support drilling to 3xD, 5xD and 8xD
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...Thorne & Derrick International
The document provides product information for heatshrink cable terminations and joints for voltages ranging from 0.6kV to 36kV. It lists various indoor and outdoor termination part numbers corresponding to cable type (XLPE, PILC), cores (single, three), voltage rating and cable cross section range. It also provides information on related accessories like earthing components and ordering guidelines. Coldshrink terminations are introduced as an alternative with advantages like easier installation without open flames. Technical test standards for heatshrink products are listed at the end.Insulated Tools (IEC 60900) for Low Voltage Live Line Working
This document provides specifications for various insulated hand tools rated for use at voltages below 1,000V, including:
- Screwdrivers in various sizes with flat or pozidriv/Phillips heads
- Pliers, cutters, and wire strippers of various styles and sizes
- Open-end spanners, adjustable spanners, hex key wrenches, and socket wrench sets in various sizes
Each tool is made of specialized materials and tested to ensure insulation and durability up to 10,000 volts. Strict quality control procedures are followed to maintain insulation integrity on each tool.
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem Saudi Arabia Ltd. High Voltage , Medium Voltage & Low Voltage Cable Joints, Termination Kits & Heat Shrinkable Tubing
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
This document provides specifications for various models of stainless steel cable ties from the MBT series. It lists the width, length, maximum bundle diameter, material, packaging, and product codes for each tie size. The ties are made of stainless steel 304 or 316 and are designed for use in harsh and corrosive environments. They provide high strength, reliability, and fire resistance. Some models have additional features like double wrapping or polyester coating.
Similar to Earth Braid - Flat Tinned Copper - FLTB16 (20)
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...
Arcus - Portable Earthing, Overhead Line Clamps, Surge Arresters & Short Circ...
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Mecatraction - Cable Crimps, Connectors, Splices & Crimping Tools
Pipe fitting . in Pipes and tubes manufatuers, supplier, dealer in mumbai ,i...
Pipe fitting . in Pipes and tubes manufatuers, supplier, dealer in mumbai ,i...
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...
Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...
Insulated Tools (IEC 60900) for Low Voltage Live Line Working
Insulated Tools (IEC 60900) for Low Voltage Live Line Working
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Raychem saudi arabia ltd. high voltage , medium voltage & low voltage cab...
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Inconsistent user experience and siloed data, high costs, and changing customer expectations – Citizens Bank was experiencing these challenges while it was attempting to deliver a superior digital banking experience for its clients. Its core banking applications run on the mainframe and Citizens was using legacy utilities to get the critical mainframe data to feed customer-facing channels, like call centers, web, and mobile. Ultimately, this led to higher operating costs (MIPS), delayed response times, and longer time to market.
Ever-changing customer expectations demand more modern digital experiences, and the bank needed to find a solution that could provide real-time data to its customer channels with low latency and operating costs. Join this session to learn how Citizens is leveraging Precisely to replicate mainframe data to its customer channels and deliver on their “modern digital bank” experiences.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Recently uploaded (20)
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Digital Banking in the Cloud: How Citizens Bank Unlocked Their Mainframe
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Earth Braid - Flat Tinned Copper - FLTB16
- 1. Stainless Steel Roll Springs Roll springs provide a reliable method of solderless earthing in low and medium voltage heatshrink joint and termination systems. The springs listed below are all standard stock items. We are happy to quote you for any alternative if full details are provided. PART NUMBER INNER DIA (mm) WIDTH (mm) LENGTH (mm) APPLICATION RANGE (mm) CF1 7.39 9.50 200 9-12 CF2 9.22 12.70 250 12-16 CF3 15.5 15.90 216 16-23 CF4 18.47 15.90 400 22-30 CF5 22.17 19.00 400 28-38 CF6 25.91 25.40 711 36-42 CF7 35.05 25.40 610 42-56 CF8 44.00 20.00 935 54-80 Earthing Components A wide range of copper earth straps/socks are available from stock and can be cut to the required length. Solder blocks can be applied and braids can be insulated with heatshrink sleeving if desired. PART NUMBER DESCIPTION MAX LENGTH FLTB 7.5 FLAT TINNED COPPER EARTH STRAP 7.5mm2 CSA 250 mtr FLTB 16 FLAT TINNED COPPER EARTH STRAP 16mm2 CSA 250 mtr FLTB 25 FLAT TINNED COPPER EARTH STRAP 25mm2 CSA 100 mtr TCB 12.5 TUBULAR TINNED COPPER EARTH SOCK 7.5mm2CSA 100 mtr TCB 25 TUBULAR COPPER EARTH SOCK 25mm ID BY 16mm2 CSA 25 mtr TCB 50 TUBULAR COPPER EARTH SOCK 50mm ID BY 25mm2 CSA 20 mtr KM 50 TINNED COPPER SCREENING BANDAGE 50mm WIDTH 5 mtr WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 Page 37 WWW.THORNEANDDERRICK.CO.UK