DURON-E heavy duty engine oils provide advanced protection against soot and wear for diesel engines. They are formulated to exceed API CJ-4 requirements and protect engines using low emission technologies. The oils are based on purified base oils and additives to control soot, reduce viscosity increase and wear, and allow for extended drain intervals. Testing shows the oils outperform competitors with superior soot control and low temperature performance. DURON-E oils are suitable for a wide range of on-highway diesel engines.
AMSOIL produces synthetic and synthetic blend oils, greases, and filters for diesel engines and heavy-duty applications. The document discusses their synthetic diesel motor oils which provide better wear protection, fuel economy, and extended drain intervals compared to conventional oils. It also summarizes their synthetic and synthetic blend transmission fluids, gear lubricants, greases, and filtration products for heavy-duty trucks and equipment.
This document discusses lubrication of electric motor bearings. It emphasizes that lubricant is critical for electric motors to reliably operate at high speeds. It recommends following proper lubrication practices and staying informed of lubrication technology advances. The document then discusses regreasing procedures and highlights the benefits of a polyurea-based grease as a standard fill for electric motor bearings, including its high temperature resistance and oxidation stability.
AMSOIL lubricants have a long service life. Non-synthetic lubes can
break down from oxidation and heat, creating sludge and forming
engine deposits. AMSOIL lubricants resist oxidation and the damaging
effects of intense heat to provide superior performance and
extended service life.
Synthetic lubricants are engineered from pure chemicals rather than refined from crude oil. This allows them to withstand higher temperatures than conventional oils without breaking down. They also have uniform molecular structures that reduce friction and wear. Due to their designability, synthetic lubricants can be tailored for specific applications to maximize performance and equipment life.
This document describes several synthetic grease products from Precision Synthetic for various industrial applications. PRECISION Synthetic is developed for arctic environments and has an operating range of -45°C to 170°C. PRECISION XL EP2 is recommended for heavy-duty and general-purpose bearings in wet environments from -20°C to 160°C. PRECISION XL EP1 can be used instead of EP2 in cold winter weather for bearings from -25°C to 160°C.
Dow Corning offers a line of Molykote lubricants for mining applications that can withstand extreme conditions. Their lubricants protect equipment from heat, cold, dust and heavy loads. They also resist flinging off and wash out to reduce downtime. Dow Corning's global presence and engineering expertise can provide customized lubrication solutions and services to mining customers worldwide. Their lubricants are used in a wide range of mining equipment from draglines to conveyors to help extend equipment life.
Molykote 1122 is an extreme pressure synthetic grease for lubricating open gears and chains. It provides better lubricity under heavy loads, long lubrication intervals due to its synthetic base oils, and excellent resistance to water, steam, acids, and alkalis. Molykote 1122 is suitable for lubricating slew ring gears, highly loaded gear elements, open gears prone to corrosion, and open gears and chains exposed to harsh environments. It forms a protective film on gear surfaces to prevent abrasion and lasts longer than conventional greases.
This document discusses lubricating grease, including its definition, composition, classifications, applications, and the grease manufacturing process. It defines grease as a solid or semi-fluid product made by dispersing a thickening agent in a liquid lubricant. The document outlines the key components of grease, classifications according to consistency and applications, and provides an overview of the grease production process including typical plant sizing and key equipment.
AMSOIL produces synthetic and synthetic blend oils, greases, and filters for diesel engines and heavy-duty applications. The document discusses their synthetic diesel motor oils which provide better wear protection, fuel economy, and extended drain intervals compared to conventional oils. It also summarizes their synthetic and synthetic blend transmission fluids, gear lubricants, greases, and filtration products for heavy-duty trucks and equipment.
This document discusses lubrication of electric motor bearings. It emphasizes that lubricant is critical for electric motors to reliably operate at high speeds. It recommends following proper lubrication practices and staying informed of lubrication technology advances. The document then discusses regreasing procedures and highlights the benefits of a polyurea-based grease as a standard fill for electric motor bearings, including its high temperature resistance and oxidation stability.
AMSOIL lubricants have a long service life. Non-synthetic lubes can
break down from oxidation and heat, creating sludge and forming
engine deposits. AMSOIL lubricants resist oxidation and the damaging
effects of intense heat to provide superior performance and
extended service life.
Synthetic lubricants are engineered from pure chemicals rather than refined from crude oil. This allows them to withstand higher temperatures than conventional oils without breaking down. They also have uniform molecular structures that reduce friction and wear. Due to their designability, synthetic lubricants can be tailored for specific applications to maximize performance and equipment life.
This document describes several synthetic grease products from Precision Synthetic for various industrial applications. PRECISION Synthetic is developed for arctic environments and has an operating range of -45°C to 170°C. PRECISION XL EP2 is recommended for heavy-duty and general-purpose bearings in wet environments from -20°C to 160°C. PRECISION XL EP1 can be used instead of EP2 in cold winter weather for bearings from -25°C to 160°C.
Dow Corning offers a line of Molykote lubricants for mining applications that can withstand extreme conditions. Their lubricants protect equipment from heat, cold, dust and heavy loads. They also resist flinging off and wash out to reduce downtime. Dow Corning's global presence and engineering expertise can provide customized lubrication solutions and services to mining customers worldwide. Their lubricants are used in a wide range of mining equipment from draglines to conveyors to help extend equipment life.
Molykote 1122 is an extreme pressure synthetic grease for lubricating open gears and chains. It provides better lubricity under heavy loads, long lubrication intervals due to its synthetic base oils, and excellent resistance to water, steam, acids, and alkalis. Molykote 1122 is suitable for lubricating slew ring gears, highly loaded gear elements, open gears prone to corrosion, and open gears and chains exposed to harsh environments. It forms a protective film on gear surfaces to prevent abrasion and lasts longer than conventional greases.
This document discusses lubricating grease, including its definition, composition, classifications, applications, and the grease manufacturing process. It defines grease as a solid or semi-fluid product made by dispersing a thickening agent in a liquid lubricant. The document outlines the key components of grease, classifications according to consistency and applications, and provides an overview of the grease production process including typical plant sizing and key equipment.
Z-Series heated-roll flatwork ironers are designed to maximize productivity and quality for on-premise laundries. The ironers can finish linens in one pass without dryer conditioning and do not require messy wax application and removal. The ironers feature increased processing speeds over previous models of 40-50% and new burner systems for greater efficiency. Z-Series ironers are also durable, ergonomic, and include safety features.
1) Project Sales Corp wishes its customers a Happy Deepavali and thanks them for their continued business.
2) The newsletter focuses on lubrication of key components like chains, bearings, and open gears in dusty environments. Special lubricants that incorporate solid lubricants like molybdenum disulfide are needed to work despite contamination.
3) Molykote Longterm 2+ Grease and Molykote 321R Spray are effective lubricant options for these conditions, forming protective films despite dust and extending equipment life up to 10-12 times compared to conventional lubricants.
1) Project Sales Corp wishes its customers a Happy Deepavali and thanks them for their continued business.
2) The newsletter focuses on lubrication of key components like chains, bearings, and open gears in dusty environments. Special lubricants that incorporate solid lubricants like molybdenum disulfide are needed to work despite contamination.
3) Molykote Longterm 2+ Grease and Molykote 321R Spray are effective lubricant options for these conditions, forming protective films despite dust and extending equipment life up to 10-12 times compared to conventional lubricants.
Bio-lubricants for Tropics to Save Energy and EnvironmentOleg Kulikov
Engine oil is comprised of a base fluid enhanced with additives. We developed a novel bio-based additive pack for engine oils. It comprises neither Sulfur nor Phosphorus and enables application of palm olein as a base fluid for tropical countries. Such bio-oil enhances fuel economy of an engine up to 30% and radically extends longevity of the engine as wear rate can be 25-50 (!) times slower in comparison with the best synthetic engine oils. We work on similar bio-oils for countries with moderate climate too.
The document discusses how dirty diesel fuel is silently destroying modern high-pressure diesel fuel systems. Modern fuel systems operate at much higher pressures than in the past, up to 30,000 psi. This has exposed a problem with ultra-fine particle contamination in fuel that is abrasive and causing components like pumps and injectors to fail prematurely. While fuel filters and engine filters only catch particles larger than 30 and 15 microns respectively, the problem is particles as small as 2-10 microns that are reducing component life. Fleet operators need to test fuel quality and implement filtration to remove harmful ultra-fine contaminants to protect their fuel systems and avoid costly repairs.
The document discusses lubricant applications for various components in power plants. It lists components in steam turbines, boilers, coal handling plants, steam generating plants, coal dust mills, crushing plants, and bell and thrust ring applications. For each component, it specifies the Molykote lubricant product recommended, such as G-n Plus Paste, P 37, D 321 R, BR 2 plus, and U-n Paste. The applications require lubricants that can withstand high temperatures, provide long-term lubrication, and allow for easy assembly and dismantling of parts.
This document summarizes an experimental study on the use of neem methyl esters as biodiesel in a compression ignition engine. Neem oil was transesterified to produce biodiesel, which was then blended with diesel in ratios of 10%, 20%, and 30% by volume. The blends were tested in a single cylinder diesel engine and performance and emission characteristics were analyzed at varying loads. Results showed that the B20 blend performed better than diesel with lower emissions. Higher blend ratios like B30 saw decreased performance due to higher viscosity negatively impacting combustion. Overall, the study demonstrated the potential of neem biodiesel to replace a portion of diesel fuel.
Brooks manufactures high performance pin oven chains used in the beverage can industry. The chains are manufactured in 21ft lengths with pins every 7th pitch. Pins are assembled with spring loaded PEEK tips. Brooks supplies chains, sprockets, guides, and lubrication systems to optimize chain performance and life. Proper lubrication and maintenance are essential for maximizing the chain's service life.
This document provides information about various condensate cleaners from PURO, including the ENVIRO (65 cfm), PURO (300 cfm), PURO GRAND (1250 cfm), and PURO GRAND Xtender (2500 cfm). It describes their features and specifications, how they work to separate oil from condensate, and answers common questions about condensate cleaning and older separator models.
The document discusses opportunities for using coconut oil as a biofuel in Pacific Islands. Key points include:
1) Coconut oil can replace or be blended with diesel fuel in engines, providing economic benefits through lower local costs compared to imported diesel.
2) Using coconut oil can support local agro-industries and reduce emissions compared to diesel. However, straight coconut oil requires engine adaptations.
3) Producing biodiesel from coconut oil is more expensive than using straight coconut oil due to chemical processing requirements.
The document discusses Molykote technologies for chain lubrication, including their dispersions, anti-friction coatings, greases, oils, and aerosols. It provides details on specific Molykote products for chain lubrication, such as Molykote M30 lubricant, Polygliss aerosol, CO220 oil, and MKLn grease. The document aims to help users select the right Molykote product for their chain lubrication needs.
This document provides information about Shell Corena compressor oils:
- The Shell Corena range includes oils for rotary and reciprocating air compressors to provide wear protection, long oil life, and high system efficiency.
- These oils are developed in close cooperation with equipment makers and their performance has been demonstrated to help reduce equipment issues.
- Users report benefits like increased oil drain intervals up to 100%, extended equipment service life up to 3 times longer between overhauls, and reduced operating temperatures.
Este documento describe un proyecto para crear oportunidades de negocio entre emprendedores en España. Explica las vías de cooperación disponibles como misiones comerciales y ferias. También detalla las tres fases del proyecto RUTA CECE, que incluye formación para emprendedores, y cómo participar poniéndose en contacto con las áreas de desarrollo local y registrándose en el proceso de formación.
Este documento describe un curso de 180 horas de duración para Técnico de Mantenimiento en Edificios e Instalaciones Públicas. El curso enseña conocimientos básicos sobre limpieza, mantenimiento de estructuras, pintura, planes de protección contra incendios y cuidado de instalaciones. Al completar el curso, los estudiantes reciben una titulación acreditada por la Comisión Internacional de Formación de la UNESCO.
Convocatorias cursos TPC Huelva Febrero 2014prodisa
El documento describe tres cursos de formación profesional ofrecidos por TPC Huelva: un curso de albañilería de 20 horas del 18 al 20 de febrero, un curso de electricidad de 20 horas del 18 al 21 de febrero, y un curso básico de prevención en la construcción y metal de 60 horas del 3 al 17 de marzo. Cada curso incluye información sobre las fechas, horarios, número de horas, contacto telefónico y precios.
El primer documento resume un proyecto de rediseño web para Kaz Munay Gas International en 2014 en Rumania. El segundo documento resume un proyecto de sistema de reservas online para los MTV Europe Music Awards en 2014 en Escocia. El tercer documento resume un proyecto de rediseño web para MTAG Technology, una compañía de la industria del acero, en 2013 en Rumania.
El documento lista 20 juguetes populares que se han visto este año y proporciona enlaces a un blog donde se pueden encontrar más detalles sobre cada juguete.
La Navidad en España se caracteriza por varias tradiciones como decorar los hogares y calles con luces, árboles de Navidad y pesebres. El 22 de diciembre se realiza el sorteo nacional de Lotería que marca el inicio de las fiestas. La Nochebuena y Navidad se pasan en familia con cenas que incluyen jamón, mariscos, pavo y dulces como turrón y mazapanes. El 25 de diciembre Papá Noel trae regalos a los niños. Los días de los inocentes y Nochevieja
Este documento presenta una lista de vocabulario en español correspondiente al nivel de exigencia del Diploma Básico de Español. La lista incluye palabras comunes de A a E como aficionado, abrigo, aburrido, accidente, aceite y más.
DOSIER PARA EMPRENDEDORES DE BARCELONA ACTIVA| ASESORIA BALAGUERAssessoria Balaguer
Como tramitar el alta de autónomos con la ayuda de Barcelona Activa, cada vez emprender es mas fácil, y si lo necesitáis contáis con nuestra ayuda como expertos en el tema.
Z-Series heated-roll flatwork ironers are designed to maximize productivity and quality for on-premise laundries. The ironers can finish linens in one pass without dryer conditioning and do not require messy wax application and removal. The ironers feature increased processing speeds over previous models of 40-50% and new burner systems for greater efficiency. Z-Series ironers are also durable, ergonomic, and include safety features.
1) Project Sales Corp wishes its customers a Happy Deepavali and thanks them for their continued business.
2) The newsletter focuses on lubrication of key components like chains, bearings, and open gears in dusty environments. Special lubricants that incorporate solid lubricants like molybdenum disulfide are needed to work despite contamination.
3) Molykote Longterm 2+ Grease and Molykote 321R Spray are effective lubricant options for these conditions, forming protective films despite dust and extending equipment life up to 10-12 times compared to conventional lubricants.
1) Project Sales Corp wishes its customers a Happy Deepavali and thanks them for their continued business.
2) The newsletter focuses on lubrication of key components like chains, bearings, and open gears in dusty environments. Special lubricants that incorporate solid lubricants like molybdenum disulfide are needed to work despite contamination.
3) Molykote Longterm 2+ Grease and Molykote 321R Spray are effective lubricant options for these conditions, forming protective films despite dust and extending equipment life up to 10-12 times compared to conventional lubricants.
Bio-lubricants for Tropics to Save Energy and EnvironmentOleg Kulikov
Engine oil is comprised of a base fluid enhanced with additives. We developed a novel bio-based additive pack for engine oils. It comprises neither Sulfur nor Phosphorus and enables application of palm olein as a base fluid for tropical countries. Such bio-oil enhances fuel economy of an engine up to 30% and radically extends longevity of the engine as wear rate can be 25-50 (!) times slower in comparison with the best synthetic engine oils. We work on similar bio-oils for countries with moderate climate too.
The document discusses how dirty diesel fuel is silently destroying modern high-pressure diesel fuel systems. Modern fuel systems operate at much higher pressures than in the past, up to 30,000 psi. This has exposed a problem with ultra-fine particle contamination in fuel that is abrasive and causing components like pumps and injectors to fail prematurely. While fuel filters and engine filters only catch particles larger than 30 and 15 microns respectively, the problem is particles as small as 2-10 microns that are reducing component life. Fleet operators need to test fuel quality and implement filtration to remove harmful ultra-fine contaminants to protect their fuel systems and avoid costly repairs.
The document discusses lubricant applications for various components in power plants. It lists components in steam turbines, boilers, coal handling plants, steam generating plants, coal dust mills, crushing plants, and bell and thrust ring applications. For each component, it specifies the Molykote lubricant product recommended, such as G-n Plus Paste, P 37, D 321 R, BR 2 plus, and U-n Paste. The applications require lubricants that can withstand high temperatures, provide long-term lubrication, and allow for easy assembly and dismantling of parts.
This document summarizes an experimental study on the use of neem methyl esters as biodiesel in a compression ignition engine. Neem oil was transesterified to produce biodiesel, which was then blended with diesel in ratios of 10%, 20%, and 30% by volume. The blends were tested in a single cylinder diesel engine and performance and emission characteristics were analyzed at varying loads. Results showed that the B20 blend performed better than diesel with lower emissions. Higher blend ratios like B30 saw decreased performance due to higher viscosity negatively impacting combustion. Overall, the study demonstrated the potential of neem biodiesel to replace a portion of diesel fuel.
Brooks manufactures high performance pin oven chains used in the beverage can industry. The chains are manufactured in 21ft lengths with pins every 7th pitch. Pins are assembled with spring loaded PEEK tips. Brooks supplies chains, sprockets, guides, and lubrication systems to optimize chain performance and life. Proper lubrication and maintenance are essential for maximizing the chain's service life.
This document provides information about various condensate cleaners from PURO, including the ENVIRO (65 cfm), PURO (300 cfm), PURO GRAND (1250 cfm), and PURO GRAND Xtender (2500 cfm). It describes their features and specifications, how they work to separate oil from condensate, and answers common questions about condensate cleaning and older separator models.
The document discusses opportunities for using coconut oil as a biofuel in Pacific Islands. Key points include:
1) Coconut oil can replace or be blended with diesel fuel in engines, providing economic benefits through lower local costs compared to imported diesel.
2) Using coconut oil can support local agro-industries and reduce emissions compared to diesel. However, straight coconut oil requires engine adaptations.
3) Producing biodiesel from coconut oil is more expensive than using straight coconut oil due to chemical processing requirements.
The document discusses Molykote technologies for chain lubrication, including their dispersions, anti-friction coatings, greases, oils, and aerosols. It provides details on specific Molykote products for chain lubrication, such as Molykote M30 lubricant, Polygliss aerosol, CO220 oil, and MKLn grease. The document aims to help users select the right Molykote product for their chain lubrication needs.
This document provides information about Shell Corena compressor oils:
- The Shell Corena range includes oils for rotary and reciprocating air compressors to provide wear protection, long oil life, and high system efficiency.
- These oils are developed in close cooperation with equipment makers and their performance has been demonstrated to help reduce equipment issues.
- Users report benefits like increased oil drain intervals up to 100%, extended equipment service life up to 3 times longer between overhauls, and reduced operating temperatures.
Este documento describe un proyecto para crear oportunidades de negocio entre emprendedores en España. Explica las vías de cooperación disponibles como misiones comerciales y ferias. También detalla las tres fases del proyecto RUTA CECE, que incluye formación para emprendedores, y cómo participar poniéndose en contacto con las áreas de desarrollo local y registrándose en el proceso de formación.
Este documento describe un curso de 180 horas de duración para Técnico de Mantenimiento en Edificios e Instalaciones Públicas. El curso enseña conocimientos básicos sobre limpieza, mantenimiento de estructuras, pintura, planes de protección contra incendios y cuidado de instalaciones. Al completar el curso, los estudiantes reciben una titulación acreditada por la Comisión Internacional de Formación de la UNESCO.
Convocatorias cursos TPC Huelva Febrero 2014prodisa
El documento describe tres cursos de formación profesional ofrecidos por TPC Huelva: un curso de albañilería de 20 horas del 18 al 20 de febrero, un curso de electricidad de 20 horas del 18 al 21 de febrero, y un curso básico de prevención en la construcción y metal de 60 horas del 3 al 17 de marzo. Cada curso incluye información sobre las fechas, horarios, número de horas, contacto telefónico y precios.
El primer documento resume un proyecto de rediseño web para Kaz Munay Gas International en 2014 en Rumania. El segundo documento resume un proyecto de sistema de reservas online para los MTV Europe Music Awards en 2014 en Escocia. El tercer documento resume un proyecto de rediseño web para MTAG Technology, una compañía de la industria del acero, en 2013 en Rumania.
El documento lista 20 juguetes populares que se han visto este año y proporciona enlaces a un blog donde se pueden encontrar más detalles sobre cada juguete.
La Navidad en España se caracteriza por varias tradiciones como decorar los hogares y calles con luces, árboles de Navidad y pesebres. El 22 de diciembre se realiza el sorteo nacional de Lotería que marca el inicio de las fiestas. La Nochebuena y Navidad se pasan en familia con cenas que incluyen jamón, mariscos, pavo y dulces como turrón y mazapanes. El 25 de diciembre Papá Noel trae regalos a los niños. Los días de los inocentes y Nochevieja
Este documento presenta una lista de vocabulario en español correspondiente al nivel de exigencia del Diploma Básico de Español. La lista incluye palabras comunes de A a E como aficionado, abrigo, aburrido, accidente, aceite y más.
DOSIER PARA EMPRENDEDORES DE BARCELONA ACTIVA| ASESORIA BALAGUERAssessoria Balaguer
Como tramitar el alta de autónomos con la ayuda de Barcelona Activa, cada vez emprender es mas fácil, y si lo necesitáis contáis con nuestra ayuda como expertos en el tema.
Estudio sobre oportunidades móvil en el sector Travelideup
En ideup hemos participado junto con otras empresas seleccionadas por Google como The Cocktail, Metriplica, PlanetMedia, Multiplica y Webanalytics en el análisis de las "decisiones clave para dar el salto a la nueva era móvil".
Las sesiones ThinkPerformance organizadas por Google tenían por objetivo mostrar las nuevas oportunidades que se han abierto con la llegada de los dispositivos móviles y descubrir las claves en el sector de retail y travel.
Durante estas reuniones se ha profundizado sobre el impacto que esta reciente realidad tiene en el sector retail y travel y el modo de afrontarla y se han elaborado dos estudios.
http://www.ideup.com/blog/estudio-sobre-las-nuevas-oportunidades-movil-en-el-sector-retail-y-travel
MassChallenge 2011 Bootcamp Day 5: FinanceBrendan O'Neil
The document discusses various sources of capital available for entrepreneurs, including angels, venture capital firms, and state programs. It provides information on different funding stages and amounts, the attributes of companies that are more likely to receive funding, and tips for engaging with investors. Various financing options are outlined, including equity, debt, venture debt, and working capital loans. Factors that lenders examine are also summarized.
Este documento presenta la 28a edición de la feria BioCultura que se celebrará en Madrid del 8 al 11 de noviembre. La feria contará con más de 700 expositores y más de 70.000 visitantes. Se presentarán sectores relacionados con la alimentación ecológica, la cosmética natural, la ropa y calzado ecológicos, el medio ambiente y la bioconstrucción. Además, se ofrecerán más de 200 actividades sobre estos temas.
El documento describe el seminario como una técnica de enseñanza donde los estudiantes trabajan en grupos pequeños para investigar un tema bajo la guía del profesor. El seminario tiene como objetivos compartir conocimientos entre los estudiantes, desarrollar habilidades de investigación e indagación, y promover el aprendizaje colaborativo. El proceso del seminario involucra la división de los estudiantes en subgrupos, el intercambio de ideas dentro de los subgrupos, la presentación de conclusiones al grupo completo, y una evaluación final.
Prezentace, která byla součástí webináře 14. 8. pro Podnikání budoucnosti. Nejprve se soustředíme na nejčastější chyby na stránkách a poté se soustředíme na tři nejdůležitější prvky na stránkách.
Dle našich zkušeností jejich implementace do stránek má pozitivní dopad na jakékoliv online podnikání či prezentaci.
Educación multimedia: Sistemas multimedia, Aplicaciones multimedia y ambient...Lizeth Cetzal
Este documento analiza tres plataformas educativas en línea. Resume que la primera página no organiza bien sus contenidos, lo que dificulta encontrar información. La segunda página ofrece una gran variedad de recursos como blogs y foros para docentes, pero la cantidad de contenido puede ser abrumadora. La tercera página se enfoca más en información teórica que en contenidos multimedia, lo que limita su enfoque conductista. En general, concluye que el material multimedia educativo debe satisfacer objetivos y contenidos de manera que los estudiantes exploren y
Las páginas web (Marta Vicente, María Sanz, silvia rodríguez y blanca nuño)Blancauam
Las páginas web pueden ser una herramienta educativa útil para profesores, alumnos, padres y orientadores. Se pueden utilizar para comunicación, búsqueda de información, entrega de trabajos y más. Algunos ejemplos incluyen blogs, webquest y páginas con juegos y actividades para niños. Es importante evaluar críticamente los contenidos en línea y enseñar a los estudiantes a hacerlo también.
Semanal audiencia y notoriedad sem50_2014Zenith España
Este documento presenta datos sobre cuotas de audiencia y publicidad de televisión en España durante la semana del 8 al 14 de diciembre de 2014. Los programas más vistos fueron "Velvet" en Antena 3, un partido de la Champions League en La 1 y "La que se avecina" en La Sexta. El primer quintil de campañas publicitarias, con mayor número de GRPs, incluyó anuncios de El Corte Inglés, LIDL, Movistar y Phone House. Las marcas con mayor notoriedad publicitaria en TV fueron El Corte Ingl
Gearcon Lubricants manufactures and supplies an extensive range of automotive and industrial lubricants including gear oil, engine oil, hydraulic oil, cutting oil, and grease. The products are manufactured using high quality raw materials and strict quality control standards. The company's lubricants meet various automotive and industrial specifications. The document then lists and provides details of various lubricant products produced by Gearcon including gear oils, hydraulic oils, engine oils, cutting oils, and grease. It provides information on the applications and specifications of each product type.
Texaco Ursa Ultra X 10W-40 is an ultra high performance synthetic diesel engine lubricant formulated to meet Euro-4, Euro-5, and OEM specifications. It offers superior wear protection, long oil drain intervals, thermal stability, protection of emissions systems, and fuel efficiency. Applications include diesel truck and bus engines, and it is suitable for use in engines with DPF, CRT, and SCR technologies.
This document provides information on various maintenance products from New Holland, including lubricant products (hydraulic/transmission fluids, engine oils, greases), filtration products (lube, fuel, hydraulic, air filters), coolant/antifreeze, and fluid analysis systems. It describes the features and benefits of specific New Holland-approved products like MasterTran hydraulic/transmission fluid and MasterGold engine oil, which are engineered to provide protection, performance, and quality for agricultural and industrial equipment.
Petronas Syntium 1000 SAE 15W-50 is a fully synthetic engine oil that exceeds the latest API SM specifications. It is specially formulated to provide ultimate engine protection and performance for high performance engines, especially those with emission control devices operating under extreme conditions. The synthetic base oils and additives provide exceptional thermal and oxidation stability to minimize thickening at high temperatures, control deposits, and reduce engine wear. Extensive testing shows it delivers complete engine protection for demanding operating conditions throughout long drain intervals.
Yamuna Lubricants Pvt. Ltd. is well known private sector company. manufacturer all types of lubricants.(i.e. Engine oil, Gear oil, Hyd Oil, ATF, Cutting oil)
This document provides product descriptions and specifications for various automotive and industrial lubricants produced by Yamuna including:
- Engine oils for gasoline and diesel engines in various viscosity grades
- Transmission fluids and gear oils for manual and automatic transmissions
- Industrial gear oils and machinery oils for enclosed gears and general machinery lubrication
- Hydraulic oils for medium and high pressure hydraulic systems
For each product, the document outlines the base stocks, additives, specifications and recommended applications. The lubricants are designed to provide protection, reduce wear and corrosion, and lower maintenance costs.
Electric Motor Bearing Grease Selection - Project Sales CorpProject Sales Corp
This document discusses lubrication of electric motor bearings. It emphasizes that lubricant is critical for electric motors to reliably operate at high speeds. It recommends following proper lubrication practices and staying informed of lubrication technology advances. The document then discusses regreasing procedures and highlights the benefits of a polyurea-based grease as a suitable lubricant choice, noting its high temperature resistance helps extend relubrication intervals and bearing life.
This document provides an overview of Elf lubricant products for motorcycles and automotive engines. It discusses the basics of lubrication and different types of lubricants including their composition and functions. Specific Elf products covered include Elf Super Sporti ADV 15W50, Elf Molygraphite 15W50, Elf Molygraphite 10W30, Elf Grapholia MS 15W40, Elf Synthetic Pro 10W50, Elf Moto 2T Power, and Elf Moto 4T Power.
Engine Oil Additive - FM is available in two blends: FM-Conditioner and FM-Protect. FM-Conditioner conditions worn engine components over 1,500-2,000 miles prior to using FM-Protect long term. Both blends contain nanodiamonds in a graphene shell that deliver benefits like friction reduction, increased load bearing capability, reduced pollution, temperature stability, and extended engine and oil life. Engine Oil Additive - FM can be added to gasoline or diesel engines and is recommended in amounts ranging from 1.6 to 15 oz depending on engine oil capacity. Independent laboratory testing confirms the product's performance claims.
The document provides an overview of Lupromax, a proprietary lubricant technology that uses heat activated technology. It summarizes the technology, explaining that it plates metal surfaces it contacts, increasing contact area and reducing friction and wear. This allows for reductions in fuel consumption, engine wear, emissions and extended oil change intervals. The document then lists the various Lupromax lubricant products and their applications and specifications. It establishes that the products are NATO compliant and meet European Union Restriction of Hazardous Substances directives.
"AZMOL British Petrochemicals" is a petrochemical company that has been manufacturing high-quality oils, lubricants and various cutting fluids for more than 80 years. Today, the company's activities are focused on the modernization of production, product improvement and expansion of the sales market.
The document discusses the technical advantages of Lukoil Avantgarde motor oils for diesel engines. It provides details on various Lukoil Avantgarde oil products, including their approvals, specifications met, and applications. The oils are formulated to provide protection under severe operating conditions while allowing for extended drain intervals and lower maintenance costs. Performance test results show benefits like reduced wear and cleaner pistons compared to competitor products.
This document provides product listings and descriptions for various marine engine parts and lubricants sold by eGuard, including prices and rewards points. It includes listings for ethanol treatment, lower unit gear lubes, TC-W3 2-cycle oils, 4-stroke engine oils, impellers, water pump kits, and fuel/water separator filters. For each product, it provides the part number, size, OE part number if applicable, price, and rewards points earned per case. It also includes descriptions of the features and benefits of the products.
This document provides product information for various marine engine oils and lubricants sold by Sierra. It includes product numbers, sizes, prices and rewards points for each product. The products are for outboard and inboard marine engines and include oils for 2-stroke and 4-stroke engines, both conventional and synthetic varieties. The document also describes promotions for earning double rewards points on select products during summer months.
This document provides product listings and descriptions for various marine engine parts and lubricants sold by eGuard, including prices and rewards points. It includes listings for ethanol treatment, lower unit gear lubes, TC-W3 2-cycle oils, 4-stroke engine oils, impellers, water pump kits, and fuel/water separator filters. For each product, it provides the part number, size, OE part number if applicable, price, and rewards points earned per case. It also includes descriptions of the features and benefits of the products.
Centrifugal Oil Cleaner removes very fine dirt from oil upto 1u and below, by centrifugal force created in centrifuge rotor. Conventional filters cannot remove such fine dirt form oil. There are no consumables hence no recurring cost. Collected dirt can be easily cleaned and the unit put back to use again. With clean oil, wear of tools and dies is reduced and job finished is improved. The oil need not be replaced frequently, thereby saving substantially on oil expenses and protecting environment.
Centrifugal Oil Cleaner removes very fine dirt from oil upto 1u and below, by centrifugal force created in centrifuge rotor. Conventional filters cannot remove such fine dirt form oil. There are no consumables hence no recurring cost. Collected dirt can be easily cleaned and the unit put back to use again. With clean oil, wear of tools and dies is reduced and job finished is improved. The oil need not be replaced frequently, thereby saving substantially on oil expenses and protecting environment.
The document discusses Champion racing oils formulated for extreme racing conditions. It describes Champion 600 Series DOT 4 Racing Brake Fluid designed to withstand high heat without boiling. It also discusses Champion 75W-90 Synthetic Gear Oil containing Shock Load Inhibitor to absorb load transitions and reduce wear. Finally, it discusses Champion Racing Motor Oils containing zinc and phosphorus additives, which were dyno tested to provide more horsepower and torque than competitors' oils.
This document provides information on lubricants for passenger vehicles produced by AZMOL, including synthetic, semi-synthetic and mineral engine oils, transmission oils, greases, and antifreezes. It lists various products in each category and provides specifications and performance advantages. Application guidelines are given for choosing the proper lubricant based on ambient temperatures and vehicle/engine requirements.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
1. DURONTM -E API CJ-4
HEAVY DUTY ENGINE OILS
Introduction Features and Benefits
Petro-Canada's DURON-E line of premium DURON-E Heavy Duty Engine Oils offer a
performance multigrade engine oils deliver number of premium performance features
industry leading protection against the costly which include:
effects of soot - which can range from • Advanced soot control
increased wear to lower productivity and
impaired fuel economy. They're formulated to • Helps prevent soot agglomeration, Petro-Canada starts
exceed API CJ-4 requirements and are suitable which: with the patented
HT purity process
for use in the latest 2010 EPA compliant low • Minimizes soot related engine wear to produce
crystal-clear, 99.9%
emission engines which employ advanced • Minimizes soot related viscosity pure base oils.
exhaust after treatment devices such as diesel increase, resulting in better The result is a
particulate filters (DPF) with or without diesel maintenance of fuel economy and range of lubricants,
specialty fluids and
oxidation catalysts (DOC), increased rates of cold temperature performance and greases that deliver
Exhaust Gas Recirculation (EGR) and Selective protection maximum
Catalytic Reduction (SCR). DURON-E heavy performance for our
• Maintains shear stability customers.
duty engine oils are suitable for use in engines
powered by both ultra low and low sulphur • High oil film strength for high
diesel fuel. DURON-E is back serviceable and temperature protection
carries the API CI-4 Plus, CI-4, CH-4 licenses • Exceptional after shear viscosity
required by pre-’07 diesel engines. retention helps protect your engine
DURON-E is formulated from one of the purest • Reduced oxidative thickening
base oils in the world; the result of a patented • Extends drain intervals
HT purity process to produce 99.9% pure base
oils. That purity helps maximize the • Maintains low temperature performance
effectiveness of the oil’s soot controlling • Reduced valve train wear
chemistry and high performance additive • Helps extend engine life
system. DURON-E is formulated to the highest
API 4-stroke diesel and gasoline engine oil • Reduced piston deposits
performance standards and is suitable for use • Excellent engine protection
in extended oil drain service. Extending drain • Helps maintain engine power and fuel
intervals should always be undertaken with efficiency
good operating practices and maintenance
• Corrosion protection
programs including a regular oil analysis
program. Contact your Petro-Canada technical • Helps reduce engine corrosion,
representative for additional information and particularly in idling equipment
assistance. • Reduced oil consumption
• Reduces the need for top-up oil
• Emission system friendly
• Low ash formula helps prevent
premature DPF plugging and shortened
maintenance intervals
2. Product Line EXCEPTIONAL WEAR PROTECTION
DURON-E Synthetic 10W-40 IRON (DURON-E SYN 10W-40) SOOT (DURON-E SYN 10W-40)
Full synthetic all-weather heavy duty diesel engine oil.
Formulated with a proprietary additive system, HAULING 140,000 LBS CUMMINS ISX EGR
160 4
DURON-E Synthetic 10W-40 is designed to provide 140 HIGH LEVELS OF IRON
industry leading soot control, which results in 120 3
IRON (PPM)
exceptional protection against engine wear and
SOOT (%)
100
extended drain performance (exceeding OEM standard 80 2
intervals)* even in the harshest operating conditions 60
and maximum allowable load conditions. It combines 40 1
20
superior pumpability at - 35°C (5W grade requirement)
0 0
and excellent shear stability with excellent engine wear 0 10000 20000 30000 40000 50000 60000
6200 12500 18600 24800 31000 37300
control and oil top-up performance. DURON-E Synthetic DURON-E Synthetic 10W-40 consistently shows exceptional iron wear
10W-40 can potentially help improve fuel economy rates and engine protection - even in heavy soot loads and tough
through ease of start-up, lower viscous drag and operating conditions. This includes benefits of longer engine life and
increased reliability on the road.**
avoidance of the need for idling.
DURON-E Synthetic 5W-40 COLD CRANK VISCOSITY
DURON-E Synthetic 5W-40 provides excellent @ -20°C (ASTM D5293)
protection and performance, especially in low 7500
7000
temperature environments. It helps conserve energy 6500 DURON-E
and reduces engine wear through ease of cold weather VISCOSITY, cP 6000 DURON-E
INDUSTRY REQUIREMENT (MAXIMUM 7,000 cP)
start-up and lower viscous drag. 5500
5000
DURON-E XL 15W-40 4500
4000
DURON-E
DURON-E XL is formulated with a synthetic base oil 3500
LOWER IS BETTER
DURON-E XL DURON-E XL DURON-E MAJOR MAJOR MAJOR MAJOR MAJOR MAJOR
blend and high-performance additives to deliver SYNTHETIC 15W-40 15W-40 COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR
10W-40 15W-40 15W-40 15W-40 15W-40 15W-40 15W-40
exceptional soot control and all-weather performance.
Outstanding shear stability and excellent low
temperature pumpability combine with the soot MRV BORDERLINE PUMPABILITY
controlling formulation to deliver comprehensive @ -25°C (ASTM D4684)
LOWER IS BETTER
protection to vital engine parts over a wide range of
60000
operating conditions. And because DURON-E XL keeps
VISCOSITY, cP
50000
its fresh oil properties longer, it can help extend drain
40000
intervals (versus OEM standard intervals)* and reduce
30000
the need for top-up oil. DURON-E
20000
DURON-E DURON-E
INDUSTRY REQUIREMENT (MAXIMUM 60,000 cP)
DURON-E 15W-40 10000
DURON-E XL DURON-E XL DURON-E MAJOR MAJOR MAJOR MAJOR MAJOR MAJOR
SYNTHETIC 15W-40 15W-40 COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR
DURON-E 15W-40 offers advanced soot controlling 10W-40 15W-40 15W-40 15W-40 15W-40 15W-40 15W-40
capabilities. It also demonstrates excellent all-weather
performance including dependable cold start-up VISCOSITY LOSS
performance and exceptional shear stability, AFTER 90-CYCLE K.O. SHEAR TEST (ASTM D7109)
minimizes engine wear and oil consumption. It 3.0
LOWER IS BETTER
demonstrated extended drain capabilities (exceeding
cSt UNITS LOST (@ 100°C)
2.5
OEM standard intervals)* while subjected to severe 2.0
service conditions. 1.5
DURON-E 10W-30 1.0 DURON-E DURON-E DURON-E
0.5
DURON-E 10W-30 delivers advanced soot control, all-
0
weather performance and is field proven to deliver DURON-E XL DURON-E DURON-E MAJOR MAJOR MAJOR MAJOR MAJOR MAJOR
15W-40 15W-40 SYNTHETIC COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR COMPETITOR
similar protection to DURON-E 15W-40. This oil can 10W-40 15W-40 15W-40 15W-40 15W-40 15W-40 15W-40
potentially help increase fuel economy by up to 1%†. It
Gives your engines superior protection in all-weather conditions.
provides CJ-4/SM performance in a 10W-30 viscosity DURON-E consistently outperforms the competition by
grade and protects exhaust catalysts and filters. demonstrating exceptional all-weather performance - including
premium preformance in both high and low temperatures.
†Compared to DURON-E 15W-40 results obtained from VOLVO D12D test.
* Extending drain intervals should always be undertaken in conjunction with a regular oil analysis program.
** Results shown above are based on used oil analysis data from large on-highway fleet Cummins ISX EGR engine. Results are not guaranteed and can vary due
to many factors including, but not limited to: equipment make, model, age and condition; maintenance practices; driver behaviour; load; and operating conditions.
3. Approvals and Recommendations Approved
Suitable For Use
DURON-E DURON-E DURON-E DURON-E DURON-E
Approvals Synthetic Synthetic XL 15W-40 10W-30
10W-40 5W-40 15W-40
ACEA
ACEA E9 - 08
ACEA E7 - 08
ACEA E7 - 04
API
API CJ-4
API CI-4 PLUS
API CI-4
API CH-4
API SM
API SL
Caterpillar
Caterpillar TO-2
Caterpillar ECF-1-a
Caterpillar ECF-2
Caterpillar ECF-3
Caterpillar SEBU 6385
Cummins
Cummins CES 20076
Cummins CES 20077
Cummins CES 20078
Cummins CES 20081
Detroit Diesel
Detroit Diesel Power Guard 93K214
Detroit Diesel Power Guard 93K215
Detroit Diesel Power Guard 93K218
Detroit Diesel, 7SE273 (Series 2000/4000)
Ford
Ford M2C171-C
Ford M2C171-D
Ford WSS-M2C171-E
Mack
Mack EO-M / EO-M Plus
Mack EO-N PP
Mack EO-N PP '03
Mack EO-O PP '07
Volvo
Volvo VDS-2
Volvo VDS-3
Volvo VDS-4
Other
DEUTZ DQC III - 05
General Motors 9985930
JASO DH-1, DH-2
JASO MA, MA2
MAN 3275
MAN 3275-1
MB 228.1 / MB 228.3
MB 228.31
MTU Type 2
MTU Type 2.1
Renault VI RLD-3
* Detroit Diesel recommends an SAE 40 grade only for 2-stroke cycle engines, except where starting aids are not available or at very cold temperatures, when
the use of an SAE 15W-40 or SAE 30 will facilitate starting.
4. Applications
Car and Light Duty Diesel Engines
DURON-E engine oils are also suitable for use in diesel powered engines in smaller vehicles, including passenger cars
and light trucks where API CJ-4, CI-4 Plus, CI-4, CH-4 or earlier specifications are required. Consult your owner’s
manual.
Gasoline and CNG Engines
DURON-E exceeds the latest API SM gasoline engine oil specification and is suitable for gasoline and CNG applications
where API SM or earlier specifications are required. Suitable for use in wet clutch applications where JASO MA or MA2
is recommended.
Typical Performance Data
ASTM DURON-E DURON-E DURON-E DURON-E
DURON-E DURON-E
PROPERTY TEST SYNTHETIC SYNTHETIC SYNTHETIC XL
15W-40 10W-30
METHOD 10W-40 5W-40 0W-40 15W-40
Flash Point, °C / °F D92 233 / 451 229 / 444 239 / 462 235 / 455 235 / 455 235 / 455
Kinematic Viscosity
cSt @ 40°C / SUS @ 100°F 103 / 525 94.4 / 480 82.5 / 418 114 / 586 118 / 609 77.7 / 397
D445
cSt @ 100°C / SUS @ 210°F 15.2 / 79.9 15.4 / 80.5 14.2 / 75.8 15.5 / 81.2 15.6 / 81.5 11.8 / 66.2
Viscosity Index D2270 156 173 180 144 139 146
High Temp/High Shear
D4683 4.3 4.3 4 4.5 4.4 3.6
Viscosity cP @ 150°C
Cold Cranking Viscosity, cP @ °C 6150 5665 5631 5673 6170 5740
D5293 (-25 / -13) (-30 / -22) (-35 / -31) (-20 / -4) (-20 / --4) (-25 / -13)
Borderline Pumping Viscosity D4684 20040 20110 24290 15950 18970 16060
cP @ °C/°F (-30 / -22) (-35 / -31) (-40 / -40) (-25 / -13) (-25 / -13) (-30 / -22)
Sulphated Ash, % wt D874 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0
Total Base No. (TBN), mg KOH/g D2896 10.3 8.8 8.3 10.3 8.3 8.6
The values quoted above are typical of normal production. They do not constitute a specification.
Health and Safety Petro-Canada Europe Lubricants Limited
Wellington House, Starley Way
To obtain Material Health and Safety Data Sheets, Birmingham International Park
contact one of Petro-Canada’s TechData Info Lines. Solihull, B37 7HB, United Kingdom
Telephone. . . . . . . . . . . . . . . +44 (0) 121 781 7264
Fax . . . . . . . . . . . . . . . . . . . +44 (0) 121 781 7401
TechData Info Lines UK Website. . . . . . . . . . . . . . www.petro-canada.co.uk
If you would like to know more about Petro-Canada German Website . . . . . . . . . www.petro-canada.de
DURON-E heavy duty engine oils, or any other product in
PRINTED ON RECYCLABLE PAPER
Petro-Canada America Lubricants
our complete line of quality lubricants, please contact 980 North Michigan Avenue
us at: Suite 1400, #1431
Chicago, Illinois
Lubricants Head Office
USA 60611
Petro-Canada Lubricants Inc.
Phone . . . . . . . . . . . . . . . . . 1-888-284-4572
2310 Lakeshore Road West Fax. . . . . . . . . . . . . . . . . . . . 1-708-246-8994
PRINTED IN CANADA
Mississauga, Ontario
Canada L5J 1K2 Petro-Canada Asia Pacific Holding Company Ltd.
Jia Shi Lubricants Trading (Shanghai) Co. Ltd.
Canada - West. . . . . . . . . . . Phone 1-800-661-1199 1908 World Trade Tower
- East (English) . . . . Phone 1-800-268-5850 500 Guangdong Road, Huangpu District
(French) . . . . Phone 1-800-576-1686 Shanghai, China 200001
Other Areas . . . . . . . . . . . . . Phone (416) 730-2408 Phone . . . . . . . . . . . . . . . . . +86-21-6362-0066
E-mail. . . . . . . . . . . . . . . . . . lubecsr@suncor.com Fax . . . . . . . . . . . . . . . . . . . +86-21-6362-0536
Website . . . . . . . . . . . . . . . . lubricants.petro-canada.ca Website . . . . . . . . . . . . . . . . www.petrocanada.cn
IM-8028E (11.10)
Petro-Canada is a Suncor Energy business
TM
Trademark of Suncor Energy Inc. Used under licence.