The primary person who is responsible for the daily monitoring and remediation of the Maintenance Operations Areas. The area, equipment and associated surfaces are clean, integral and have been inspected for applicable acceptable conditions per SOP in order to ensure they are suitable for their intended use. I am ultimately accountable for executing the Facility Fitness program its assessments and the overall condition of all areas assigned. The process of improving a situation or of correcting a problem, the correction of something defective, in particular of reversing or stopping environmental damage. Notification of remediation, Risk Work Plan, Hot Work Permit, LOTO Plan, etc. These are documents or to information used within a GMP environment that do not provide direction on how perform GMP-related work.

1. Daniel T. Gomez
4919 Patina Ct.
Oceanside CA. 92057
(626) 429-0010
Skills:
Ability to learn methods and procedures quickly and work in fast paced environment
Capable of working in controlled environments requiring special gowning
Enjoys taking on new challenges and responsibilities
Experienced in Manufacturing operations
Knowledge of Microsoft computer applications (SAP, Word, Excel, Powerpoint)
Works well in team environment
Ability to work with microscope
Ability to lift at least 60 lbs
Customer service and communication skills
Supports LEAN concepts and continuous improvement initiatives
Experience:
Genentech, Inc. Oceanside, CA
Maintenance Operations Facility Fitness
09/2015 to Present
The primary person who is responsible for the daily monitoring and remediation of the Maintenance Operations
Areas.
The area, equipment and associated surfaces are clean, integral and have been inspected for applicable
acceptable conditions per SOP in order to ensure they are suitable for their intended use.
I am ultimately accountable for executing the Facility Fitness program its assessments and the overall condition
of all areas assigned.
The process of improving a situation or of correcting a problem, the correction of something defective, in
particular of reversing or stopping environmental damage.
Notification of remediation, Risk Work Plan, Hot Work Permit, LOTO Plan, etc. These are documents or to
information used within a GMP environment that do not provide direction on how perform GMP-related work.
MOC Pacoima, CA
Mechanical Assembler
02/2015 to 06/2015
Performs inspections of assembly machinery
FAI (first article inspection) of newly designed or revised products
Ensure proper paperwork is completed and incoming parts are received and conform to specifications,
engineering and purchase order requirements
In-process inspection of parts being manufactured to ensure quality standards are met
Set up sub-assemblies used in the construction of car products
Inspect and prepare final products for shipment
A & K Service LLC Fairview, MT
Service Mechanic
12/2014 to 02/2015
Maintain and service fleet of Semi trucks
Perform oil changes, replace parts (brake pads and drums, batteries, battery cables, alternators, serpentine
belts, air valves, lights, etc.), and preventive vehicle maintenance per DOT standards
Diagnose and troubleshoot vehicle failure and identify solutions
Remove drilling mud, grease, and grime from fracturing trucking equipment using a high pressure washer
Collection and disposal of material removed from fracturing equipment per OSHA requirements
Baxter Healthcare Los Angeles, CA

2. Manufacturing Technician II
04/2013 to 12/2014
Perform set up and monitor centrifugation processes
Make critical adjustments to process bulks including pH and chemical additions
Perform assembly, disassembly and cleaning of equipment and process rooms per cGMP standards
Assist with training of all department employees according to cGMP and GDP standards
Troubleshoot equipment failure and identify solutions
Spectrolab (A Boeing Company) Sylmar, CA
Manufacturing Processor B
09/2006 to 08/2012
Responsible for bonding and testing diodes for solar cells and solar panels made for powering spacecrafts and
satellites
Construct solar cell assemblies using microscope to interconnect and weld components
Thermal curing of solar assembly components in oven to remove impurities and solidify adhesives
Perform assembly, disassembly and cleaning of equipment per SOP/drawing requirements and GMP standards
Order supplies and chemicals
Maintain VOC logs
Identify and communicate process deviations that may impact quality of product
Deliver high quality products within cycle time
Assist in review of batch records for accuracy and completeness
Troubleshoot equipment failure and identify solutions
Responsible for ensuring that all manufacturing is in compliance with Good Manufacturing Practice regulations,
ISO Standards, and OSHA Standards
Cable Communications Inc. Studio City, CA
Service Technician
11/2004 to 09/2006
Prepare for cable television installations by reviewing orders, gather equipment, supplies, and tools, and
coordinate schedule with customers
Plan installations by evaluating location, locating address, and laying out equipment and wiring plan
Install cable equipment, run and pull cable, program and calibrate equipment while adhering to codes,
regulations and standards
Verify cable television system for functionality and optimal performance by testing equipment and connections
and correcting any issues
Diagnose, troubleshoot, repair, replace or upgrade components
FedEx Los Angeles, CA
Courier/Driver
04/2001 to 10/2004
Responsible for driving the company vehicle to perform pick-up/delivery service for FedEx Office centers and
for customers
Pick-up duties encompass driving to the customer’s place of business (or a FedEx Office store), receiving
completed masters for photocopying orders and picking up supplies and inventory items from vendor’s place of
business
Delivery duties include delivering finished photocopy orders to customers (or a FedEx Office center) and
distributing marketing materials as requested
Receive daily route information from a centralized dispatcher
Responsible for the operation of company Vehicle according to applicable motor vehicle regulations, company
policy and auto insurance guidelines
Ensuring the proper upkeep and maintenance of the vehicle by conducting regular servicing and cleaning
procedures
Responsible for maintaining pick-up/delivery logs and vehicle maintenance logs to document duties performed
Adhere to FedEx company and vehicle safety policies and guidelines
Follow accident procedures and observe traffic laws

3. Responsible for ensuring quality service is provided at each customer interaction by providing efficient and
professional delivery service, answering customer questions, problem resolution and polite and caring
transactions/interactions
Interpret and understand Material Safety Data Sheets (MSDS) for proper handling and delivery of various types
of packages containing such material
Servo Products Los Angeles, CA
Mechanical Technician
01/1998 to 04/2001
Responsible for CNC machine testing and electronic wiring
Responsible for loading and unloading of freight
Performed operations requiring the use of a forklift to lift and store heavy equipment
Education:
Los Angeles Trade Tech College (LATTC)
Los Angeles, CA
Operation and Maintenance Engineering – Steam Plant
Certification expected in 2016
Pasadena City College
Pasadena, CA
Vocational Certificate: Electronic Assembly 4070
Performed troubleshooting and diagnostic of electrical wiring and equipment
Pasadena High School
Pasadena, CA
High School Diploma
Other Interests:
Over 15 years of experience of motorcycle repair work
Ability to perform preventive maintenance, tune-ups, oil changes, valve adjustments, spark plug
replacement, chain adjustments, etc.
Completed total rebuild of several engines including crankshaft, valves, cams, and cylinder
Completed rebuild of an entire motorcycle including the frame, engine, and other parts
Moderate level of understanding of air compressors, pumps, and plumbing components and concepts
References:
Mike Laituri #818-266-4348 (MOC) Supervisor
David Romero #626-710-7778 (A&K) Supervisor
Emmanuel Apolinar #805-813-9738 (Baxter) Supervisor
David Ontano #661-305-1883 (Baxter) Lead operator
Lillian Fonseca #818-359-9832 (Boeing) Supervisor
Myisha Taylor #626-641-2220 (Gilead) Quality Supervisor
Robert Depue #928-527-1154 (Servo Products) Supervisor