1. Presentation for: www.BFSinc.org
Typically, this process is undertaken after a variety of heat exchange loops have
been hydrostatically tested and prior to the first combustion firing or initial hot
exhaust introduction to the HSRG.
2. Dry ice-blasting is a form of abrasive blasting the solid form of carbon oxide directed
at a surface in order to clean it by the BFS Inc. Contact us now: 15855 Mandan Road,
Apple Valley, CA 92307
Dry Ice Blasting
HRSG or Heat Recovery Steam Generator needs to be cleaned periodically in order to
remove any dirt or contaminants that can result in the impairment of heat transfer leading
eventually to the premature failure of pressure-part. A wide array of chemical cleaning
procedures are undertaken in order to remove and clean preservatives, oils, mill scale and
various parts of HRSG. Many times, preservatives and oil is left behind after the process of
manufacturing is over. Periodic HRSG cleaning may be required in the operating units on
the basis of quantity and type of deposits seen in the boiler. Chemical cleaning has gained a
lot of popularity these days.
3. Co2 blasting Rapid vaporization of liquid carbon dioxide is used for dry ice
blasting its cleaning by BFS Inc. Contact us now: 15855 Mandan Road, Apple
Valley, CA 92307
Dry Ice Blasting
For over 22 years we are the people that have
been dedicated to developing and perfecting
environmentally friendly dry ice cleaning
technology and methodology for use in the
Industrial Community..
4. BFS Inc. is providing all types dry ice blaster cleaning services dry ice blaster
form of abrasive blasting. Call us now on: (760) 525-3451
Dry Ice Blasting
How we made dry ice cleaning, more mobile,
affordable and able to travel the USA by flying our
staff and equipment rather than shipping via truck
or having our equipment attached to over the
road travel. BFS can be anywhere in the USA ready
and working within 24/48 hours..
5. Dry ice cleaning is a form of abrasive dry ice blasting the solid form of carbon oxide it’s
is harmful for all of peoples try for cleaning BFS Inc. Contact us now: 15855 Mandan
Road, Apple Valley, CA 92307
Dry Ice Blasting
BFS, Inc. has brought cutting edge technology to the industrial community that both
respects the environment we all live in and offers superior results in almost every
application.
For pressure washing and industrial cleaning, dry ice blasting is being used as the
most preferred method. Some of the most common methods being used are soda
blasting, water blasting and sand blasting.
6. BFS Inc. is providing all types turbine cleaning services it’s is harmful for all of peoples. Contac
us now: 15855 Mandan Road, Apple Valley, CA 92307
Turbine Cleaning
It is the Environmentally Friendly process not
just for the planet but also the worker!
· 3. Dry Ice Blasting Includes:
C02 Blast technology
Hydro-generators
Power Plants
Turbines
Compressors
HRSG Units
Surface Coating
Environmental Assessment
(California registered)
7. BFS Inc. is providing all types turbine cleaning services it’s is harmful for all of peoples.
Contact us now: 15855 Mandan Road, Apple Valley, CA 92307
Dry Ice Cleaning
HRSG or Heat Recovery Steam Generator needs to be cleaned periodically in order to
remove any dirt or contaminants that can result in the impairment of heat transfer
leading eventually to the premature failure of pressure-part. A wide array of chemical
cleaning procedures are undertaken in order to remove and clean preservatives, oils,
mill scale and various parts of HRSG.
HRSG chemical cleaning is needed before combined cycle operation. Typically, this
process is undertaken after a variety of heat exchange loops have been hydrostatically
tested and prior to the first combustion firing or initial hot exhaust introduction to the
HSRG. In preoperational cleaning process, the first step is performing water flush with
high velocity on drums, headers, drain lines and pendant loops. This is done to remove
foreign material that has come loose. Air and water mixtures and detergent addition can
also help in facilitating this process.
8. BFS Inc. is providing cryogenic cleaning directed at a surface in order to clean it. Contact
us now: 15855 Mandan Road, Apple Valley, CA 92307
Many times, preservatives and oil is left behind after the process of manufacturing is over.
Periodic HRSG cleaning may be required in the operating units on the basis of quantity
and type of deposits seen in the boiler. Chemical cleaning has gained a lot of popularity
these days.