Dross grab is fabricated in stabilized stainless steel where possible and sized to suit your galvanizing kettles. Dross grab require minimal maintenance and clearance height from top face of Galvanizing kettles.

1. PNEUMATIC DROSS GRAB
Heavy duty design
Stainless Steel / Mild Steel construction
No “Forced” closure - will not damage lost parts of bucket
Ideal for use with deep kettles
The best solution with enclosures
The dross grab is fabricated in stabilized stainless
steel sized to suit your galvanizing kettle
d ime n s i o n s . T h e two g r a b f l a p s a r e
perforated with suitable sized holes to
allow free molten zinc to run back into the bath.
All parts submerged into the zinc will be fabricated
with welding rods suitable for use with stainless
steel in order to withstand the zinc erosion.
We include for a single point lift only, and so do
not allow for any steelwork i.e. arrestor hooks
or unloading frame to retain the head fabrication
whilst emptying the dross, but can quote for
t h e s e i f r e q u i r e d .
The grab is supplied in self-colour, and will
require minimal maintenance with periodic
inspection of the bucket hinge pins for natural wear.
Required minimum clearance height from top face of kettle to underside of
your lifting hook for moving loaded drossing garb away from kettle is d+780 mm.
NOTE
It is not advisable to use the drossing grab in a zinc temperature exceeding 470
PRECIMAX ENGINEERS LIMITED
?
?
?
?
?
oC.
B-2, Raj Palace Society, Plot- 16, Sector-2, Koper khairane, Navi Mumbai-400 709.
Phone No.: +91-22-64568712/64568714 Fax: 27544917
Email : marketing@precimaxonline.com Website : www.precimaxonline.com