Distribution Rollers Multi Conductor
Multi-Conductor Distribution Rollers The No. 5403 Multi-Conductor Distribution Roller is constructed from light weight, high strength 356-T6 aluminum alloy and may be ordered with any of the following accessories. A - No. 5403 Roller. B - No. 5413 Hook Assembly. C - No. 5423 Cross Arm Bracket. D - No. 5433 Suspension Yoke. E - No. 5443 Up-Lift Roller. G - No. 5463 Running Board. Running Boards are designed for the Lindsey Multi Conductor Distribution Rollers to assure each conductor and pulling line is deposited in the proper sheave groove. Running boards are proof tested at the factory prior to shipment. Swivels may be ordered factory installed. Safe working load is 2,500 pounds. All ferrous materials are hot dip galvanized or electro cadmium plated. Sheaves are mounted on precision ground Conrad type, permanently lubricated and sealed, maintenance-free ball bearings. Weight as shown: 25 pounds.
Recommended
More Related Content
More from Lindsey-USA Transmission and Manufacturing Co.
More from Lindsey-USA Transmission and Manufacturing Co. (13)
Recently uploaded
Recently uploaded (20)
Distribution Rollers Multi Conductor
- 1. Copyright © 2015 Lindsey Manufacturing Co. P.O.Box 877, 760 N. Georgia Av., Azusa, CA 91702 USA Tel. +1(626) 969 3471 Fax. +1(626) 969 3177 www.lindsey-usa.com Distribution Stringing Rollers 5403 Multi-Conductor Distribution Rollers The No. 5403 Multi-Conductor Distribution Roller is constructed from light weight, high strength 356-T6 aluminum alloy and may be ordered with any of the following accessories. A - No. 5403 Roller. B - No. 5413 Hook Assembly. C - No. 5423 Cross Arm Bracket. D - No. 5433 Suspension Yoke. E - No. 5443 Up-Lift Roller. G - No. 5463 Running Board. Running Boards are designed for the Lindsey Multi Conductor Distribution Rollers to assure each conductor and pulling line is deposited in the proper sheave groove. Running boards are proof tested at the factory prior to shipment. Swivels may be ordered factory installed. Safe working load is 2,500 pounds. All ferrous materials are hot dip galvanized or electro cadmium plated. Sheaves are mounted on precision ground Conrad type, permanently lubricated and sealed, maintenance-free ball bearings. Weight as shown: 25 pounds.
- 2. Copyright © 2015 Lindsey Manufacturing Co. P.O.Box 877, 760 N. Georgia Av., Azusa, CA 91702 USA Tel. +1(626) 969 3471 Fax. +1(626) 969 3177 www.lindsey-usa.com