Technodigm offers Fluid Dispensing Systems and Controllers for virtually any dispensing applications. Our wide range of dispensing equipment will help you to dispense virtually any assembly fluid – glue, thin solvents or thick silicones and brazing paste. Our dispensing system apply the fluid quickly, precisely and also minimize waste as well as hand fatigue.
Coating Innovation - Tilt Function Brings More Coverage to Vertical Partsandaautomation
http://anda-automation.com
Brought to you Anda Automation, the specialist in conformal coating and high speed fluid dispensing.
For more articles, visit http://www.anda-automation.com/category/blog/
Coating Innovation - Tilt Function Brings More Coverage to Vertical Partsandaautomation
http://anda-automation.com
Brought to you Anda Automation, the specialist in conformal coating and high speed fluid dispensing.
For more articles, visit http://www.anda-automation.com/category/blog/
Automatic Spray Coating System - Technodimg InnovationHung Nguyen
T o achieve excellent reliability, repeatability and efficiency in conformal coating of spray coating and dispensing applications, the choice is Technodigm Automatic Spray Coating and Conformal Coating System, the ideal coating technology for demanding production requirements.
Technodigm’s automatic coating and dispensing system is the result from our constant effort in designing and manufacturing high performance liquid coating systems. It incorporates both the engineering expertise and application experience that make Technodigm one of the leaders in conformal coating technology in Asia region.
Our spray coating system can be used for acrylic coating, PCB coating or surface coating with various kinds of industrial applications. Our products have been through a lot of tests to prove it reliability during processes. With our spray coating machine, our customers could achieve both better throughput and quality.
With the objective of providing total solution in the area of fluid dispensing and UV curing, Technodigm focus on research and development to build high quality standard platforms to serve customers in various industries. These standard platforms enable users to concentrate on process and product development, and relieve them from finding solutions for complex dispensing and UV curing processes.
Technodigm works with industry material suppliers to better understand material characteristics and application requirement. This provides us with good knowledge and experience to create dispensing platforms that are not only user-friendly, but are also able to handle a wide range of materials with different properties and characteristics. Further research into latest UV technologies enables us to develop effective and powerful UV curing systems to cater to applications that require fast curing to achieve process optimization.
Our dispensing equipment ranges from simple table-top dispensing controllers to fully integrated robotic systems. Each system is designed to meet customer's requirement on volumetric consistency, high throughput, low maintenance, and with a reasonable cost. We provide not only table top models and stand-alone systems, but also fully integrated in-line platforms.
Our UV curing equipment caters primarily to processes that require curing of UV adhesives. Due to the fast curing characteristic of UV adhesive, it has become the preferred material for processes that require fast curing, either for achieving quick fixing of positions, or to achieve high throughput. To cater to different product and process nature, we provide 3 key types of UV equipment; the spot cure, flood cure as well as conveyorized curing system.
With the above range of products, we aspire to be one of the very few companies in this industry to be able to provide total solutions to our customers involved in fluid handling processes.
Prominent trader of a high quality range of Gas Chromatography, Spectrophotometer, Viscometer, Micro - Ultra Micro Balances, Semi Micro Balance, Analytical Balance, High Precision Balance, Precision Balances, Industrial Balance & Scales, Moisture Analyzer, etc.
Incorporated in the year 2013, at Mumbai(Maharashtra, India), we “K Tek Analytics” are known as the prominent trader of a high quality range of Gas Chromatography, Spectrophotometer, Viscometer, Micro - Ultra Micro Balances, Semi Micro Balance, Analytical Balance, High Precision Balance, Precision Balances, Industrial Balance & Scales, Moisture Analyzer, etc.These products are manufactured by our reliable vendors’ in their state-of-the-art manufacturing unit using optimum quality components and cutting-edge technology in adherence to international quality standards. Owning to features such as high accuracy, robust design, easy installation, optimum functionality and longer working life, these products are widely demanded. Furthermore, the offered range of products can be availed in various technical specifications at reasonable prices.
Catalog Frenic-HVAC (Fuji Electric): Biến tần Frenic-HVAC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Reasonable and flexible internal design makes customization realizable. We can provide solutions for you
according to user demand and special working conditions to avoid the embarrassing modification of process
design upon the unsuitability of product. We stick to the principle of providing clients with more professional
and quicker support all the time. Through the experience and accumulation in the past years, we have
comprehended both pumps and the water treatment industry more profoundly. Our strong technical team
can provide individualized products or compact dosing system centering on dosing pump for your production
process according to your particular requirements.
Dosing pump for water treatment
As a senior sourcing expert on water treatment facilities and accessories, our procurement covers a comprehensive range of water treatment facilities and components, mainly including FRP water tanks, membrane housings, membrane elements, cartridges, security filters, metering pumps, etc. These products are widely used in drinking water, commercial water, municipal, medical, food and other fields.
We integrate upstream supply chain products of the water treatment industry. In addition, we work with renowned suppliers and manufacturers. As a result, we can continuously supply high-quality water treatment components and systems for customers across the world to meet the needs of a wide range of applications, thereby optimizing water resources and promoting the sustainable development of the global environment.
If you are looking for water treatment facilities and accessories. Please contact
E-mail: jon@membranehousing.org
Mobile: +86-15633187985 (WhatsApp, WeChat)
The new Carrier Inverter Ducted Air Conditioner
combines the ease of installation of Ducted Air
Conditioners and the performance of 1:1 VRF units
to provide effective cooling without compromise
The Exactus BAM is a real-time beta gauge built to satisfy users, regulators and those from the health community by providing truly accurate, precise, real time measurement of fine particulate matter automatically, it is a permanent installation with the capacity to be portable when needed.
FEATURES & SPECIFICATIONS
Real-time, accurate results without correction factors, regardless of season or geographic location
True ambient sampling provides accurate measurement of semi-volatile nitrates and organic compounds
Lightweight, rugged construction is easily mounted on a tripod in minutes
All-weather construction allows for true ambient sampling
Operates on AC power.
Fuji tu dong hoa catalog frenic-aqua-fuji-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Pacorr Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index
of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a
jet of a particular length and diameter.
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Transcat Presents: The NEW GE Druck DPI 611 Pressure CalibratorTranscat
GE Druck's Tom Reid introduces their exciting new pressure calibrator. Learn how the industry's new workhorse pressure calibrator can replace the DPI610 and DPI615!
Learn more at www.transcat.com
Density Compensation Module for Drexelbrook Universal IV Water Cut MonitorAMETEK STC
Need for density compensation?
Drexelbrook offers a density compensation module (DCM) for its Universal IV in-line water cut monitor (CM). The module automatically compensates for density changes that may occur in the compensation of products and reduces the calibration requirements due to those changes.
Learn more about the density compensation module from Drexelbrook at http://www.drexelbrook.com/Analytical-Products/Universal-IV-CM.aspx
1. Dispensing Systems
Liquid Dispenser AD2000
The AD2000 is a versatile automatic liquid dispenser which is perfectly suited for dispensing a wide variety of materials.
From minute dots of grease to larger volumes of potting materials and silicones, the AD2000 is able to accurately
dispense the desired amount of material. The fine “suck-back” adjuster allows precise and effective control of
dripping when dispensing low viscosity materials. The optional stainless steel one-touch, push-in connector allows easy
attachment of the barrel adaptor with minimal wear and tear.
Features
• Can be used with a wide range of materials
• Fine suck-back adjuster
• Foot pedal or robot-controlled dispensing
Specifications
Selectable Time Range 0.005 – 30sec
Best Achievable Cycle Time 0.1 sec/cycle
Supply Air Pressure 5 – 7 Bar, 70-100 PSI
Output Air Pressure 0.1 – 7 Bar, 1.5-100 PSI
Vacuum Pressure 0.1 – 1 Bar, 1.5-100 PSI
Power 220 VAC
Size 250 X 163 X 68mm
Weight 2.8kg
Digital Dispenser DD2500
With a digital display for time and pressure, DD2500 Digital Dispenser offers users digital time and pressure control for a
more accurate dispensing output. DD2500 also allows users to save and recall up to 10 different programs.
Features
• Digital display of dispensing time
• Digital display of precise pressure control
• Bright LCD
• 10 Memory Locations to automatically cycle 10 user-
taught programs
• Auto cycling mode allows sequencing of a self-taught
program which includes a preset dispense time and
wait duration between cycles
• Manual mode allows user to control precise timing for
dispensing
• Auto mode allows user to preset timing for dispensing
• Convenient operation via foot pedal or front panel
button
• Adjustable suck-back feature
• Complete with accessory dispensing kits
Specifications
Size 130 X 130 X 140mm
Dispense Time 0.005 – 999.999sec
Operation Modes Manual, Auto, Cycle
Internal Memory 10 Memory Locations
Power 110/220VAC
Air Input 5 – 7 Bar, 70~100 PSI
Air Output 0.1 – 7 Bar, 1~100 PSI
Weight 1.8kg
2
www.techno-digm.com
Technodigm Catalogue.indd 2 7/3/12 10:08 AM
2. Precision Digital Dispenser DD3500
When highly accurate dispensing is required, the DD3500
with its precision digital pressure control system can be used.
Incorporating a high precision air regulator with digital read-outs
for both the feed and vacuum pressure settings, together with
digital time control, allows the DD3500 to be fine-tuned to suit
even the most demanding dispensing application.
Features
• Precision pressure control
• Digital display of Pressure and Vacuum settings
• Various selectable display of Pressure units: MPa/kPa, Specifications
kfg/cm3, bar, psi, mmHg, inHg Control Method Microprocessor controlled
• Allow storage for 10 timer-controlled programs Pneumatic Control Precision
• Easy entry of dispensing parameters through front regulator control
panel keyboard Digital ON/OFF Air control
• Simple call of programmed dispense parameters Constant/Pulse vacuum control
• Selection of constant ON/time-control-pulsing for Display Section LED Program No. and Digital
vacuum control Timer Display
• 2 modes of operations: Manual and Auto Digital pressure output display for
• Timer indication for Manual and Auto mode (00.000 air output and vacuum
to 99.999) Selectable display of unit for
• Allow pedal control or press button control of pressure output
dispensing action Memory Function 10 Programs
• Optional Level Sensor & Buzzer for low material level Input/Output Signal Opto-coupler
sensing Supply Pressure Max 10 Bar
• Enhanced feature: stabilize pressure for air output Power 110/220VAC
Power Consumption 45W
Positive Displacement Pump PDP1000
PDP1030/PDP1010 is designed to be different from other dispensers. It utilized direct drive mechanism to deliver precise
amount of epoxy air free. It can be used on any type of epoxy/adhesive that is package in standard 30 and 10cc
industrial barrel. It is especially useful for volumetric dispensing of short pot life material because no moving parties in
contact with the epoxy/adhesive. This ensures that no material will be dried or cured within the equipment. Therefore
it requires little or no maintenance.
PDP1030/PDP1010 is a truth volumetric dispenser because it dispenses the exact volume of programmed epoxy/
adhesive. It is not influenced by the change in viscosity nor is it influenced by any air pressure change. Built in features
ensure that there will be no dripping or drooling of material after dispensed.
Designed to be mounted on dispensing robots, it comes with an easy use and features packed controller, PDP1000.
The controller allows users to enter the volume to be dispensed in a couple of ways. Controlled by microprocessor, it
allows the saving of up to 9 programs.
Features
• Volumetric Dispensing up to 2 – 5% tolerance (depends on the type
• of material.)
• Microprocessor Control (Micro stepping)
• LCD Display
• Easy Programming
• No dripping or drooling of material after dispensed
Specifications
Dispense Resolution 0.001mm (0.0004/ 0.0001cc on a 30/10cc Syringe)
Dispensing Speed Adjustable from 0.5mm/sec (depending on models)
Low Level Sensing Audio Alarm and Automatic Retract
Material Level Graphical display on LCD
Stored Programs 9
Dispensed Volume Direct setting/Stroke setting
Weight(Valve) 1.45kg
Weight(Controller) 3.2kg
* Will be influenced by material used, syringe type/packaging and volume dispensed.
www.techno-digm.com 3
Technodigm Catalogue.indd 3 7/3/12 10:08 AM
3. Peristaltic Pump Dispenser PP1000
The PP1000 Peristaltic Pump Dispenser is perfectly suited to dispense low viscosity materials such as cyanoacrylate glue,
UV adhesives, alkalines, acids, oils and solvents. The system works by applying a controlled positive pressure on the tube
carrying the material. No air pressure is required as the pressure to push out the material is supplied by a turning rotor.
Features
• Air-free dispensing
• Direct dispensing from bottle/container
• Manual or timed dispensing intervals
• 10 step variable pump speed to adjust flow rate
• Reversible pump flow for “vacuum suck-back” &
maintenance
• Consistent dispensed volume
Specifications
Size 190 X 184 X 94mm
Weight 4kg
Power 220VAC
RPM 0-200
Dispensing Range 0-6500 Pulse
Vacuum Range 0-3sec
Shot Size Min 0.0001cc
Viscosity Range Below 10,000 cps
Programmable Digital Dispenser PD4000
Dispensers typically have some difficulty with maintaining a consistence dispensed volume over the entire syringe
of material. Generally the dispensed volume drops as the volume of material decreases in a syringe. How serious
a problem depends on factors like viscosity, dispensed volume, needle sizes etc. PD4000 is designed with feedback
mechanisms that allow it to automatically compensate to rectify the reduction in dispensed volume. It is simple to use
and does not require any special setting or other inputs.
For material that changes viscosity over time, there is a feature that allows user to program pressure changes over
time. Memory functions allow the saving of up to 4 of such program. This function is most suitable for two component
materials.
Features
• Automatic Feedback (for compensation of
dispensing volume).
• Programming of pressures for viscosity changes over
time.
• Micro-Processor control
• Easy to use and no maintenance
• Selection of Bar/PSI for dispensing pressure
• Selection of constant ON/time-control-pulsing for
vacuum control
• Timer indication for Manual and Auto (Timer) Mode
Specifications
Control Method Electro-Pneumatic System
Pneumatic Control Automatic digital air pressure
control
Constant/Pulse vacuum control
Dispensing Pressure Up to 7 Bar/100psi
Dispensing Time 0.01 – 999.99 sec
Display Section LED digital display
Memory Functions 99 Programs plus 4 for pressure/
time programming
Supply Air Pressure > 1 Bar above dispensing pressure
Power 110-220VAC
4
www.techno-digm.com
Technodigm Catalogue.indd 4 7/3/12 10:08 AM