F1012R KNF VacuumPumps
•
0 likes•19 views
This document describes the Ace Glass SC 920 and SC 950 wireless remote control vacuum pump systems. The systems can evacuate a vacuum chamber, maintain a set pressure level, automatically detect a sample's boiling point, and follow a user-defined pressure curve using a wireless remote control. Key features include fast and accurate control, automatic boiling point detection, exceptional solvent recovery, and quiet operation.
Report
Share
Report
Share
Download to read offline
Recommended
Delta ia mds-ct2000_c_en_20160413
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical TransformersAlliance Technical Sales, Inc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.Linha completa de equipamentos #PCB #THT #SMT
The document describes an automatic SMT placement machine that can place up to 30,000 components per hour with high accuracy. It has 8 placement heads with vision systems and places various SMD components from 0603 to 74xx sizes. The machine has dimensions of 2000mm x 1150mm x 1400mm and can handle PCBs up to 1200mm in length.
Auf760 v1.1.8en
This document summarizes the specifications and features of the ALIASONIC Flange Type Ultrasonic Flowmeter Model AUF760 Series. The AUF760 series is a fixed mounted, transit-time ultrasonic flowmeter with flange end transducers for non-invasive liquid measurement. It features a 4 line LCD display, data logging, pulse output, alarms, RS-232 communication and an accuracy of +/-1% of reading. The flowmeter measures flow velocities from 0.01 to +/- 32 m/s in pipe sizes from 100mm to 1000mm and has a response time of less than 1 second.
Catalog mikro mikro mk201a-dienhathe.vn
This document provides technical specifications for an earth fault relay model MK201A. The relay has a rated current of 5A at 50Hz, with thermal withstand of 4 times rated current continuously. It has adjustable settings for low-set and high-set detection ranges, and contactors with a rated capacity of 5A at 250V AC. The relay complies with IEC 60255-26 standards and has microprocessor-based control and measurement of fundamental frequency current.
Introducing the PCM-7140
In this short presentation we'll introduce the PCM-7140 including a product overview, what's in the box, how to set up the PCM-7140 Laser Diode Driver Module and solutions to some common problems.
https://directedenergy.com/product/pcm-7140-1/
https://directedenergy.com/product/pcm-7140-10/
https://directedenergy.com/product/pcm-7140-200/
The PCM-7140 is a series of compact pulsed current sources designed to drive laser diodes, bars, arrays, or any low impedance load. The key specifications are output current from .1 A to 200 A, rise and fall times below 1 μs, pulse widths from 1 μs to 13 ms, pulse repetition rates from single shot to 100 kHz, and forward voltage from 0 V to 60 V.
The PCM-7140 output current may be set with an internal potentiometer or an external analog voltage. The pulse width is controlled with an external trigger source.
The system requires two DC supplies for operation: 12 V for housekeeping and a voltage ≤ 20 V above the laser diode’s forward voltage.
The laser or load is connected to the PCM-7140 with a 100 cm length of 18 AWG twisted pair cable (included). This same cable has the DC input connection from the high voltage power supply.
The PCM-7140 module is liquid cooled with a liquid temperature of 11 °C to 22 °C with a flow rate of 6 liters per minute. The connection type is 3/8” tubing.
Features
Pulsed Current Monitor Output
Liquid cooling for high average power applications
Applications
The PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load with a forward voltage drop up to 60 V for laboratory, research and industrial application.
Recommended
Delta ia mds-ct2000_c_en_20160413
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
Catalog mikro mikro mk203a-dienhathe.vn
The document provides technical specifications for an overcurrent relay rated for 5 amps at 50 Hz. It can monitor currents from 2.0 to 6.0 amps and has adjustable settings for time multiplier and high-set pickup. The relay has indicators and contacts for trip signaling and mounts in a 96x96mm panel. It is designed to protect electrical systems according to IEC standards and operate in temperatures from -5°C to 55°C.
Catalog mikro mikro mk204a-dienhathe.vn
The document provides specifications for the MK204A overcurrent relay, including its ratings, auxiliary supply information, setting ranges, contact specifications, indicators, performance characteristics, mechanical details, environmental conditions, typical wiring diagram, and ordering information. The relay has adjustable settings for low-set and high-set overcurrent protection, with the low-set having an inverse definite time characteristic. It is intended for panel mounting and complies with relevant protection device standards.
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical TransformersAlliance Technical Sales, Inc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.Linha completa de equipamentos #PCB #THT #SMT
The document describes an automatic SMT placement machine that can place up to 30,000 components per hour with high accuracy. It has 8 placement heads with vision systems and places various SMD components from 0603 to 74xx sizes. The machine has dimensions of 2000mm x 1150mm x 1400mm and can handle PCBs up to 1200mm in length.
Auf760 v1.1.8en
This document summarizes the specifications and features of the ALIASONIC Flange Type Ultrasonic Flowmeter Model AUF760 Series. The AUF760 series is a fixed mounted, transit-time ultrasonic flowmeter with flange end transducers for non-invasive liquid measurement. It features a 4 line LCD display, data logging, pulse output, alarms, RS-232 communication and an accuracy of +/-1% of reading. The flowmeter measures flow velocities from 0.01 to +/- 32 m/s in pipe sizes from 100mm to 1000mm and has a response time of less than 1 second.
Catalog mikro mikro mk201a-dienhathe.vn
This document provides technical specifications for an earth fault relay model MK201A. The relay has a rated current of 5A at 50Hz, with thermal withstand of 4 times rated current continuously. It has adjustable settings for low-set and high-set detection ranges, and contactors with a rated capacity of 5A at 250V AC. The relay complies with IEC 60255-26 standards and has microprocessor-based control and measurement of fundamental frequency current.
Introducing the PCM-7140
In this short presentation we'll introduce the PCM-7140 including a product overview, what's in the box, how to set up the PCM-7140 Laser Diode Driver Module and solutions to some common problems.
https://directedenergy.com/product/pcm-7140-1/
https://directedenergy.com/product/pcm-7140-10/
https://directedenergy.com/product/pcm-7140-200/
The PCM-7140 is a series of compact pulsed current sources designed to drive laser diodes, bars, arrays, or any low impedance load. The key specifications are output current from .1 A to 200 A, rise and fall times below 1 μs, pulse widths from 1 μs to 13 ms, pulse repetition rates from single shot to 100 kHz, and forward voltage from 0 V to 60 V.
The PCM-7140 output current may be set with an internal potentiometer or an external analog voltage. The pulse width is controlled with an external trigger source.
The system requires two DC supplies for operation: 12 V for housekeeping and a voltage ≤ 20 V above the laser diode’s forward voltage.
The laser or load is connected to the PCM-7140 with a 100 cm length of 18 AWG twisted pair cable (included). This same cable has the DC input connection from the high voltage power supply.
The PCM-7140 module is liquid cooled with a liquid temperature of 11 °C to 22 °C with a flow rate of 6 liters per minute. The connection type is 3/8” tubing.
Features
Pulsed Current Monitor Output
Liquid cooling for high average power applications
Applications
The PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load with a forward voltage drop up to 60 V for laboratory, research and industrial application.
Magnetostrictive Liquid Level Transmitter for Process Measurement and Control
Magnetostrictive Liquid Level Transmitter for Process Measurement and ControlAlliance Technical Sales, Inc.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environmentJogler magnetic level gauge brochure
Jogler Magnetic Level Gauges are a safe, economical way to measure and control liquid levels in any application. They are suitable for high temperature and/or pressure, full vacuum, low-specific gravity liquids, and more. Jogler magnetic gauges can be used with vessels of almost any size and shape and with any process fluid.
Fred JR - Product Sheet
Designed to be moved and positioned effortlessly, the Fred JR excels at removing weld fumes, dusts, and other airborne contaminants as small as 0.5 micron with our MERV 15 rated Nanofiber filter.
SMC LET Primary Injection Test Sets
The document describes the LET range of primary injection equipment from EuroSMC. The LET range provides high levels of AC or DC current for testing applications, with power ratings ranging from 1,000 to 8,000 VA or watts. The units feature variac-controlled output, built-in ammeters for measuring injected current, and timers for measuring trip times with 1 ms accuracy. Higher power models have two-body constructions and wheels for transportation. The LET range is suited for testing overcurrent protections, circuit breakers, and other applications requiring injection of thousands of amps.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
International Fiber Systems 346A1-R-R/1BXX Data Sheet
Buy the International Fiber Systems 346A1-R-R/1BXX at JMAC Supply.
https://www.jmac.com/IFS_International_Fiber_Systems_346A1_R_R_1BXX_p/ifs-346a1-r-r1bxx.htm?=slideshare
Vaisala HMT330 Series IndustrialTemperature and Humidity Transmitters
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
Hioki Electrical Measuring Instruments in Bangladesh
This document provides an overview of various electrical measuring instruments from Hioki, organized by product category. It includes power analyzers and power meters for measuring power parameters of inverters, motors, and power grids. It also lists current sensors, power quality analyzers, recorderscopes, memory recorders, wireless data loggers, impedance analyzers, and LCR meters. The models highlighted include high accuracy and high speed devices for applications like testing of batteries, capacitors, motors, and inverters.
Auf750 v1.1.8en
The AUF750 series ultrasonic flowmeter uses transit time technology to provide non-invasive liquid flow measurement. It has high accuracy of +/-0.5%, measures a wide range of velocities from 0.01-32 m/s, and can be installed on pipes from 15mm to 6000mm. The flowmeter offers data logging, totalizers, 4-20mA output, and RS-232 communication.
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product l...
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product line 1. ĐT: 028 77727979 - sales@envimart.vn - www.envimart.vn
Multivariable Flowmeters for Process Measurement & Control
Inline and Insertion models of the Azbil Multivariable Vortex Mass Flow Meters employ three sensing elements in a single meter; a vortex shedding velocity sensor, an RTD temperature sensor, and a solid state pressure transducer. This unique combination allows accurate mass flow measurements of gases, liquids and steam.
IGBT Based Static Voltage Regulator
Prima's Static Voltage Regulator is an IGBT-based PWM voltage regulator with tight regulation and fast correction speed of 4000 V/Sec. It has a compact size, silent operation with no moving parts, and is maintenance-free. It can be used for applications such as hospitals, hotels, commercial buildings, industries, and more. It regulates the voltage through IGBT switching without harmonic distortion and maintains a pure sine wave output.
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter. ĐT: 028 77727979 - sales@envimart.vn - www.envimart.vn
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas Applications
Low flow sensitivity means high reliability for flare gas applications. The Thermatel® TA2 thermal dispersion mass flow meter provides reliable mass flow measurement for flare gas applications to comply with monitoring requirements.
FLUXUS F608 Portable Ultrasonic Clamp-on Flow Meter
The FLUXUS F608 is a portable ultrasonic flow meter for measuring liquid flow in pipes. It uses clamp-on transducers and transit time difference measurement to provide precise bidirectional flow measurement of liquids with low gas content. The flow transmitter operates on battery power for up to 14 hours and features an integrated data logger. It is designed for use in hazardous areas and various industries including upstream oil and gas, pipelines, and chemical plants.
Radar Level Indicator for Liquids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Radar Level Indicator for Solids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
I pa series datasheet_v1
The document describes an IPA Series battery portable passive intermodulation analyzer. It is designed for tower climbers to test for passive intermodulation at cell sites. Key features include a 7 inch tablet for remote control, battery power, frequency sweep and time trace modes, and extensive reporting capabilities. It is rugged, portable, and the first battery powered PIM analyzer that supports various test scenarios such as at the top of towers or rooftops.
System Sensor APA151
Buy the System Sensor APA151 at JMAC Supply.
https://www.jmac.com/System_Sensor_APA151_p/system-sensor-apa151.htm?=slideshare
Smart act 1 English
THE WORLD’S FIRST RIFT DRIVEN® ELECTRIC ACTUATOR
For Part Turn & Multi-Turn Applications
The SmartAct®-1 electric valve actuator is the world’s first RIFT DRIVEN® product .
Its revolutionary British design has a single glass reinforced polypropylene housing that contains the RIFT motor system and gearbox. The SmartAct®-1 can be configured to produce a range of output torques up to 100Nm.
Smart, state of the art electronics provide accurate, reliable and repeatable performance characteristics and enables a comprehensive list of standard and optional features to be
offered. Optional extra cost features include failsafe and/ or modulating functionality; speed control and fieldbus communications are available to customer order.
At a time where energy consumption is becoming increasingly important to the world, the SmartAct®-1 actuator takes full advantage of the dramatic reduction in energy that the RIFT DRIVEN® system provides. This creates an electric actuator with the lowest energy usage figures available in the world market.
Standard:
- Universal power supply 12-300V
- Anti-condensation heater
- Over-torque protection
- Torque range 40, 60, 80, 100Nm
- SO5211 / EN15714-2 compliant
- Weatherproof
- Local controls
- 2 x M20 x 1.5 Cable entries
Options:
- Failsafe
- Modulating
- Fieldbus communications
- Speed control
- Data logging
- Torque profiling
- Solenoid Function
- 2 x 1/2” NPT Cable entries
- Of-Grid and Timer Facility
- Multi-Turn Function
MADE IN BRITAIN
The SmartAct®-1 electric actuator was conceived, designed, prototyped, and is being manufactured in Britain.
TH E RIFT DRIVEN® ADVANTAGE
RIFT is a new British innovation; significantly enhancing the motor characteristics resulting in a powerful, light, and yet energy efficient motor driven product.
HUGELY ENERGY EFFICIENT
A RIFT DRIVEN® product contains the RIFT technology that will transform motor driven systems in the future. They show weight and energy savings of over 75% compared to traditional motor driven systems.
In actuator comparison tests the SACO valve actuator is in fact over 90% more energy efficient than the market leading electric actuators it was compared with.
PID CONTROL
Combining PID control with a 10 bit magnetic electronic position sensing system, the SACO S m a r t a c t - 1 actuator gives very accurate positioning and timing capabilities. Part Turn or Multi-Turn applications can be configured with accuracy up to at least ¼ of a degree on most valves.
OPTIONAL SOLENOID FUNCTION
A huge advantage of the SACO actuator is that it is capable of very fast cycle times. This allows it to be used as a direct acting solenoid. Fitted to a full bore ball valve it eliminates the difficulties traditional solenoids face when used with dirty media.
Esco Animal Research Workstation / Animal Transfer Workstation
Animal research, cage changing and bedding disposal procedures are now simpler, safer and more productive with the Esco range of VIVA® Animal Containment Workstations.
With the introduction of the VIVA® range, Esco applies decades of experience in clean air technologies to the animal research laboratory, protecting personnel and the laboratory environment from:
-Hazards related to the equipment, materials and practices used in performing routine animal husbandry;
-Hazards relating directly or indirectly to animal contact;
-Hazards related to the technique or materials or biohazardous substances that may be used during the course of animal research.
WT-050.800.000.-AU-PS-A4-Chloroclam
The Chloroclam water quality monitor continually monitors and reports chlorine residual data from water distribution networks using high accuracy membrane sensing. It accesses the water main via fire hydrants and transmits data via GPRS multiple times per day. The monitor provides real-time chlorine monitoring to allow proactive water quality management.
More Related Content
What's hot
Magnetostrictive Liquid Level Transmitter for Process Measurement and Control
Magnetostrictive Liquid Level Transmitter for Process Measurement and ControlAlliance Technical Sales, Inc.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environmentJogler magnetic level gauge brochure
Jogler Magnetic Level Gauges are a safe, economical way to measure and control liquid levels in any application. They are suitable for high temperature and/or pressure, full vacuum, low-specific gravity liquids, and more. Jogler magnetic gauges can be used with vessels of almost any size and shape and with any process fluid.
Fred JR - Product Sheet
Designed to be moved and positioned effortlessly, the Fred JR excels at removing weld fumes, dusts, and other airborne contaminants as small as 0.5 micron with our MERV 15 rated Nanofiber filter.
SMC LET Primary Injection Test Sets
The document describes the LET range of primary injection equipment from EuroSMC. The LET range provides high levels of AC or DC current for testing applications, with power ratings ranging from 1,000 to 8,000 VA or watts. The units feature variac-controlled output, built-in ammeters for measuring injected current, and timers for measuring trip times with 1 ms accuracy. Higher power models have two-body constructions and wheels for transportation. The LET range is suited for testing overcurrent protections, circuit breakers, and other applications requiring injection of thousands of amps.
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Proportional Accelerator Pedal is mainly used in hydraulic proportional control and variable frequency motor control, such as Rotary Drilling Rig, Aerial Fire Engine, Battery Cars, etc.
International Fiber Systems 346A1-R-R/1BXX Data Sheet
Buy the International Fiber Systems 346A1-R-R/1BXX at JMAC Supply.
https://www.jmac.com/IFS_International_Fiber_Systems_346A1_R_R_1BXX_p/ifs-346a1-r-r1bxx.htm?=slideshare
Vaisala HMT330 Series IndustrialTemperature and Humidity Transmitters
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
Hioki Electrical Measuring Instruments in Bangladesh
This document provides an overview of various electrical measuring instruments from Hioki, organized by product category. It includes power analyzers and power meters for measuring power parameters of inverters, motors, and power grids. It also lists current sensors, power quality analyzers, recorderscopes, memory recorders, wireless data loggers, impedance analyzers, and LCR meters. The models highlighted include high accuracy and high speed devices for applications like testing of batteries, capacitors, motors, and inverters.
Auf750 v1.1.8en
The AUF750 series ultrasonic flowmeter uses transit time technology to provide non-invasive liquid flow measurement. It has high accuracy of +/-0.5%, measures a wide range of velocities from 0.01-32 m/s, and can be installed on pipes from 15mm to 6000mm. The flowmeter offers data logging, totalizers, 4-20mA output, and RS-232 communication.
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product l...
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product line 1. ĐT: 028 77727979 - sales@envimart.vn - www.envimart.vn
Multivariable Flowmeters for Process Measurement & Control
Inline and Insertion models of the Azbil Multivariable Vortex Mass Flow Meters employ three sensing elements in a single meter; a vortex shedding velocity sensor, an RTD temperature sensor, and a solid state pressure transducer. This unique combination allows accurate mass flow measurements of gases, liquids and steam.
IGBT Based Static Voltage Regulator
Prima's Static Voltage Regulator is an IGBT-based PWM voltage regulator with tight regulation and fast correction speed of 4000 V/Sec. It has a compact size, silent operation with no moving parts, and is maintenance-free. It can be used for applications such as hospitals, hotels, commercial buildings, industries, and more. It regulates the voltage through IGBT switching without harmonic distortion and maintains a pure sine wave output.
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter. ĐT: 028 77727979 - sales@envimart.vn - www.envimart.vn
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas Applications
Low flow sensitivity means high reliability for flare gas applications. The Thermatel® TA2 thermal dispersion mass flow meter provides reliable mass flow measurement for flare gas applications to comply with monitoring requirements.
FLUXUS F608 Portable Ultrasonic Clamp-on Flow Meter
The FLUXUS F608 is a portable ultrasonic flow meter for measuring liquid flow in pipes. It uses clamp-on transducers and transit time difference measurement to provide precise bidirectional flow measurement of liquids with low gas content. The flow transmitter operates on battery power for up to 14 hours and features an integrated data logger. It is designed for use in hazardous areas and various industries including upstream oil and gas, pipelines, and chemical plants.
Radar Level Indicator for Liquids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Radar Level Indicator for Solids
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
I pa series datasheet_v1
The document describes an IPA Series battery portable passive intermodulation analyzer. It is designed for tower climbers to test for passive intermodulation at cell sites. Key features include a 7 inch tablet for remote control, battery power, frequency sweep and time trace modes, and extensive reporting capabilities. It is rugged, portable, and the first battery powered PIM analyzer that supports various test scenarios such as at the top of towers or rooftops.
System Sensor APA151
Buy the System Sensor APA151 at JMAC Supply.
https://www.jmac.com/System_Sensor_APA151_p/system-sensor-apa151.htm?=slideshare
What's hot (19)
Magnetostrictive Liquid Level Transmitter for Process Measurement and Control
Magnetostrictive Liquid Level Transmitter for Process Measurement and Control
RunnTech F100 Series Proportional Accelerator Pedal
RunnTech F100 Series Proportional Accelerator Pedal
International Fiber Systems 346A1-R-R/1BXX Data Sheet
International Fiber Systems 346A1-R-R/1BXX Data Sheet
Vaisala HMT330 Series IndustrialTemperature and Humidity Transmitters
Vaisala HMT330 Series IndustrialTemperature and Humidity Transmitters
Hioki Electrical Measuring Instruments in Bangladesh
Hioki Electrical Measuring Instruments in Bangladesh
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product l...
Dynasonics u500w datasheet badger meter ultrasonic cold water meter_product l...
Multivariable Flowmeters for Process Measurement & Control
Multivariable Flowmeters for Process Measurement & Control
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter
Dynasonics dfx datasheet badger meter doppler ultrasonic flow meter
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas Applications
Magnetrol TA2 Thermal Mass Flow Meter for Flare Gas Applications
FLUXUS F608 Portable Ultrasonic Clamp-on Flow Meter
FLUXUS F608 Portable Ultrasonic Clamp-on Flow Meter
Similar to F1012R KNF VacuumPumps
Smart act 1 English
THE WORLD’S FIRST RIFT DRIVEN® ELECTRIC ACTUATOR
For Part Turn & Multi-Turn Applications
The SmartAct®-1 electric valve actuator is the world’s first RIFT DRIVEN® product .
Its revolutionary British design has a single glass reinforced polypropylene housing that contains the RIFT motor system and gearbox. The SmartAct®-1 can be configured to produce a range of output torques up to 100Nm.
Smart, state of the art electronics provide accurate, reliable and repeatable performance characteristics and enables a comprehensive list of standard and optional features to be
offered. Optional extra cost features include failsafe and/ or modulating functionality; speed control and fieldbus communications are available to customer order.
At a time where energy consumption is becoming increasingly important to the world, the SmartAct®-1 actuator takes full advantage of the dramatic reduction in energy that the RIFT DRIVEN® system provides. This creates an electric actuator with the lowest energy usage figures available in the world market.
Standard:
- Universal power supply 12-300V
- Anti-condensation heater
- Over-torque protection
- Torque range 40, 60, 80, 100Nm
- SO5211 / EN15714-2 compliant
- Weatherproof
- Local controls
- 2 x M20 x 1.5 Cable entries
Options:
- Failsafe
- Modulating
- Fieldbus communications
- Speed control
- Data logging
- Torque profiling
- Solenoid Function
- 2 x 1/2” NPT Cable entries
- Of-Grid and Timer Facility
- Multi-Turn Function
MADE IN BRITAIN
The SmartAct®-1 electric actuator was conceived, designed, prototyped, and is being manufactured in Britain.
TH E RIFT DRIVEN® ADVANTAGE
RIFT is a new British innovation; significantly enhancing the motor characteristics resulting in a powerful, light, and yet energy efficient motor driven product.
HUGELY ENERGY EFFICIENT
A RIFT DRIVEN® product contains the RIFT technology that will transform motor driven systems in the future. They show weight and energy savings of over 75% compared to traditional motor driven systems.
In actuator comparison tests the SACO valve actuator is in fact over 90% more energy efficient than the market leading electric actuators it was compared with.
PID CONTROL
Combining PID control with a 10 bit magnetic electronic position sensing system, the SACO S m a r t a c t - 1 actuator gives very accurate positioning and timing capabilities. Part Turn or Multi-Turn applications can be configured with accuracy up to at least ¼ of a degree on most valves.
OPTIONAL SOLENOID FUNCTION
A huge advantage of the SACO actuator is that it is capable of very fast cycle times. This allows it to be used as a direct acting solenoid. Fitted to a full bore ball valve it eliminates the difficulties traditional solenoids face when used with dirty media.
Esco Animal Research Workstation / Animal Transfer Workstation
Animal research, cage changing and bedding disposal procedures are now simpler, safer and more productive with the Esco range of VIVA® Animal Containment Workstations.
With the introduction of the VIVA® range, Esco applies decades of experience in clean air technologies to the animal research laboratory, protecting personnel and the laboratory environment from:
-Hazards related to the equipment, materials and practices used in performing routine animal husbandry;
-Hazards relating directly or indirectly to animal contact;
-Hazards related to the technique or materials or biohazardous substances that may be used during the course of animal research.
WT-050.800.000.-AU-PS-A4-Chloroclam
The Chloroclam water quality monitor continually monitors and reports chlorine residual data from water distribution networks using high accuracy membrane sensing. It accesses the water main via fire hydrants and transmits data via GPRS multiple times per day. The monitor provides real-time chlorine monitoring to allow proactive water quality management.
Brosur Gossen Metrawatt LINAX PQ5000 MOBILE
Brosur Gossen Metrawatt LINAX PQ5000 MOBILE.
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Siemens sitrans LUT400 series
The Siemens Ultrasonic Level Transmitter LUT400 arrangement controllers are conservative single point long-go ultrasonic controllers for constant level or volume estimation of fluids slurries and solids and high precision observing of open channel stream Ultrasonic Level Transmitter.The SITRANS LUT400 comes in three distinct models relying upon the application, level of execution and usefulness required.see more:- www.siemenstransmitter.com
Hallikainen Opacity monitor
The Hallikainen Model 7612 Opacity Monitor is a completely automated process stream analyser.
Its quick and simple maintenance requirements combined with fibre optic technology to improve precision put the 7612 at the forefront for your opacity monitoring needs.
Catalog biến tần Frenic eHVAC - beeteco.com
Catalog biến tần Frenic eHVAC - beeteco.com
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Địa chỉ : Số 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương
FB: www.facebook.com/beeteco
Email: contact@beeteco.com
Tel: 0650 3617 012
Hotline: 0909.41.61.43
Aet series
The document describes the AET series UPS from Nova Electric, which are true online UPS systems available in 1KVA to 3.2KVA capacities. The UPS have a rotatable LCD, are 19-inch rack mountable, include hot-swappable battery packs, and feature user-friendly software. Key specifications include output power ratings, input/output voltage ranges, battery details, communications options, and certifications.
Q46-76-Turbidity-Monitor.pdf
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
Vibrating Tuning Fork Level Switch
Tuning forks, with their stable resonant frequency, have been applied in numerous ways throughout many years. A modern application in industrial process control is the vibrating tuning fork level switch.The Jerguson Series 200 is a single point level switch which may be installed in any position in a pipe or vessel to detect the presence of a liquid.
The Series 200 employs a tuning fork style probe which vibrates at its natural frequency when in air. A piezoelectric crystal-system
is used to create a 1100 Hz vibration in the tuning fork. As the
tuning fork is covered by a liquid or slurry, a corresponding
shift occurs in the vibrating frequency of the tuning fork. This
shift is being monitored continuously and once a present threshold is exceeded, the output changes status.
Plasma Etch / RIE AW-901eR AW-903eR
The AW-901eR & AW-903eR single-wafer dry etchers are automated tools designed as a flexible 13.56MHz RF Parallel Plate plasma etching systems for high-volume wafer fabrication. AW-901eR & AW-903eR are in direct response to manufacturer’s concerns for wafer breakage, Uniformity, Uptime, Reliability, and Production-Proven technology
Fluid Dispensing System
Technodigm offers Fluid Dispensing Systems and Controllers for virtually any dispensing applications. Our wide range of dispensing equipment will help you to dispense virtually any assembly fluid – glue, thin solvents or thick silicones and brazing paste. Our dispensing system apply the fluid quickly, precisely and also minimize waste as well as hand fatigue.
Damper Drive Actuator With Fieldbus Communications
The new PowerVUE™ design utilizes the same rugged Hagan actuator and frame construction, combined with the accuracy and reliability of the Fisher FieldVUE DVC6000 Digital Valve Controller. The pneumatic power positioner remains the most reliable and cost-effective method of actuation. Torque ranges are from 400 ft-lbs to 4,600 ft.-lbs.
Data Teknis Gossen Metrawatt Multimeter METRAHIT : PM TECH, PM XTRA, EBASE, E...
Data Teknis Gossen Metrawatt Special Multimeter : METRAHIT PM TECH, METRAHIT PM XTRA, METRAHIT EBASE, METRAHIT ETECH, METRAHIT EXTRA, METRAHIT ESPECIAL, METRAHIT EU PRO
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Kg catalogue dc electronic load
The document discusses a high-end multi-functional electronic load called the Load Station Series (300W/1000W). It has several key features:
1) It can precisely set current waveforms on a color LCD and has dynamic, sequence, and sweep modes for testing.
2) It has a high-speed current control technology that eliminates overshoot and delivers a smooth current transition.
3) Unlike conventional loads, it acts as a resistive load from 0V so there is no delay between current and voltage, allowing it to test low-voltage devices.
4) It has options like a ripple and noise measurement module, can be remotely controlled, and its units can be connected in
KG Electronic load DC power supply Ripple and Noise meter
This document summarizes the features of the KG Load Station Series 300W/1000W electronic loads. It has a revolutionary UI like an oscilloscope for easy operation. It realizes less 35% weight than previous models. It can operate just like a resistor with no minimum voltage requirement. It has high speed current control and 4 models from 300W to 1000W in 125V and 500V ranges.
Kg catalogue dc electronic load distributed by Nihon Denkei
The document discusses a high-end multi-functional electronic load called the Load Station Series (300W/1000W). It has several key features:
1) It can precisely set current waveforms on a color LCD and has a revolutionary oscilloscope-like user interface for ease of operation.
2) It has high-speed current control technology that eliminates overshoot and delivers an ideal current shape.
3) It offers flexible operation modes including constant current, constant resistance, constant power, constant voltage, external control, and sequence mode. Accessories like a ripple and noise measurement module are also available.
4) The lightweight and compact design incorporates a large LCD, memory functions, multi-
ZIPPTORK Torque controller and monitoring system - 2020 Update
ZIPPTORK Torque controller and monitoring system - 2020 UpdateChina Pneumatic Corporation & ZIPP GROUP
This document introduces ZIPPTORK's wireless torque transducer and torque controller products for bolting applications. The system uses a patented control device, algorithm, and wireless torque transducer to enable real-time torque control and data collection for various power tools. The torque controller can control tools from multiple brands and models to achieve accurate torque control of +/-5-15%. It allows monitoring of the fastening process, recording of torque data, and intelligent compensation of torque loss. The wireless torque transducer transmits torque and rotation data to the controller or mobile devices via Bluetooth.Data Teknis Gossen Metrawatt Earth Ground Clamp : METRACLIP EARTH
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
Testing/Manufacture/ASHRE 52.2 Filter Test Rig
This document provides information on air filter testing equipment from FEC. It describes testing systems that can test various types of air filters, including pocket, cassette, and flat sheet filters, according to standards like EN 779. The systems test parameters like flow rate, differential pressure, dust holding capacity, and efficiency. They include components like test ducts, centrifugal blowers, aerosol generators, and particle counters. FEC offers these systems for testing filters used in applications like cleanrooms.
Similar to F1012R KNF VacuumPumps (20)
Esco Animal Research Workstation / Animal Transfer Workstation
Esco Animal Research Workstation / Animal Transfer Workstation
Damper Drive Actuator With Fieldbus Communications
Damper Drive Actuator With Fieldbus Communications
Data Teknis Gossen Metrawatt Multimeter METRAHIT : PM TECH, PM XTRA, EBASE, E...
Data Teknis Gossen Metrawatt Multimeter METRAHIT : PM TECH, PM XTRA, EBASE, E...
KG Electronic load DC power supply Ripple and Noise meter
KG Electronic load DC power supply Ripple and Noise meter
Kg catalogue dc electronic load distributed by Nihon Denkei
Kg catalogue dc electronic load distributed by Nihon Denkei
ZIPPTORK Torque controller and monitoring system - 2020 Update
ZIPPTORK Torque controller and monitoring system - 2020 Update
Data Teknis Gossen Metrawatt Earth Ground Clamp : METRACLIP EARTH
Data Teknis Gossen Metrawatt Earth Ground Clamp : METRACLIP EARTH
More from Stephen Martinelli
C2000 O-RingChart
This document provides ordering codes for o-rings of various sizes that are compatible with different materials from Ace Glass Inc., including Viton, Silicone, Buna-N, FETFE, EPDM, Chemraz, Kalrez and CAPFE. It lists the size codes, dimensions in inches of the inner diameter and width, and compatible ordering codes for each material for over 50 standard sizes of o-rings ranging from 2.5mm to 215mm inner diameter. It also provides kits containing o-rings of 30 standard sizes.
New Safety_Tips
This document provides safety tips for handling laboratory glassware. It advises that glassware accidents can result in cuts or more serious injuries from flying glass or chemical exposure. The document outlines steps for inspecting glassware for damage before use and cleaning, washing glassware using detergents and distilled water, storing glassware to avoid bumping, and heating glassware below its temperature limits to avoid thermal shock.
OrderOnlineFlyer_update
The document is an advertisement for Ace Glass Incorporated, a company that sells over 13,000 products of laboratory glassware and scientific equipment on their website aceglass.com. Visitors can register on the site to purchase items online through secure ordering with corporate billing or credit cards and view real-time stock levels and order histories. The site allows customers to set up order templates for repeat purchases and place tentative orders to be held for future transmission.
F1036 Filtration Apparatus
Ace Glass manufactures filtration apparatus using their Ace-ThredTM technology which allows the filter funnel and flask to thread together without a clamp. This eliminates leakage issues. Their design also maximizes membrane utilization. They offer complete filtration kits in 25mm, 47mm, and 75mm sizes using removable frits for easy cleaning. Larger volume options include Erlenmeyer flasks and Duran bottles.
F1035R Ready Reactors
This document provides information on two turn-key jacketed reactor systems from Ace Glass: a 20L system and a 50L system. The systems include a jacketed glass vessel, support stand, stir motor, agitator, and other necessary components for immediate operation. Both systems are designed for working temperatures from -60 to 200°C and atmospheric to vacuum pressure ranges. The document lists the components included with each system.
F1032R CARB Octopus
The document describes an air sampling manifold system from Ace Glass that has a four-port glass manifold with heavy duty ports for attaching tubing and instruments. The four-port manifold can be ordered with either a glass cone and cane or a cane with a polyethylene funnel on top. Individual components and complete systems are available.
F1031R YOUTILITY Bottles
The document summarizes Ace Glass's DURAN YOUTILITY Laboratory Bottle System. The system includes borosilicate glass bottles in clear or amber colors available in 125mL, 250mL, 500mL, and 1000mL capacities. The bottles feature an integrated retrace code for traceability. Matching caps have an ergonomic design and integrated retrace code. Accessories include silicone bottle tags for identification, autoclavable polypropylene caps, and polyester labels compatible with autoclaving/sterilization.
F1030R O-Ring Kits
Ace Glass offers O-ring kits containing various sizes of Viton A, Buna-N, FETFE, and mixed material O-rings. The Viton A and Buna-N kits each contain 500 total O-rings in various quantities of sizes ranging from -006 to -327. The FETFE kit contains 216 total O-rings in sizes from -008 to -220. The mixed material kit contains 360 total O-rings of Viton A, silicone, FETFE, and Buna-N in various sizes. All kits package the O-rings in a clear plastic box with an insert listing sizes and Ace part numbers.
F1029R FreezeDryingFlasks
This document provides information on freeze drying flasks and accessories sold by Ace Glass, including:
- Flasks of various sizes from 125mL to 5000mL that are compatible with rotary evaporators and freeze dryers.
- Flasks are available with snap-on rubber caps and PTFE adapter tubes in plain or stopcock configurations.
- Vacuum-tight flasks are also available that connect to adapter heads using an o-ring seal for use in rotary evaporators and freeze dryers.
- Specifications such as height, neck ID, body OD, and adapter tube sizes are provided for each flask and accessory.
F1028R Cell Culture Long Flasks
This document summarizes Ace Glass' line of long neck flasks for cell culture. It describes several types of shaker flasks with varying baffle configurations that enhance gas transfer and mixing when used with shakers. Baffled flasks aid the cell culture process, while non-baffled are ideal for growing and mixing cultures. All flasks have long necks that reduce splashing during shaking and provide a surface for optimal cell attachment. The flasks are designed to be used with separate stainless steel closures suitable for autoclaving.
F1027R Cell Culture Flasks
Fernbach flasks are designed to provide an optimal artificial environment for cell culture. They allow for maximal oxygen transfer to the culture medium and provide a large surface-to-volume ratio to enable increased cell divisions. Fernbach flasks also provide a hydrophilic environment for optimal cell attachment. These plain neck flasks are intended to be used with specific stainless steel or polypropylene closures that are suitable for autoclaving.
F1026R RotaVap Flasks
For safely evaporating solvents, high-quality glass flasks are essential. Pear shaped flasks offer greater surface area than spherical flasks, allowing for faster evaporation. Graduated receiving flasks can be used to determine solvent collection rates and are fitted to rotary evaporators. Poly-coated flasks provide an extra layer of safety against implosion under deep vacuum but cannot be used above 110°C as the coating will soften.
F1025R Traps
1) Ace Glass manufactures bump traps that are inserted between the flask and vapor duct in rotary evaporators to isolate solvents and contain any foam, splashes, or bumped solvents, preventing contamination of the condenser and receiving flask.
2) The bump traps are made of borosilicate glass with reinforced standard taper joints and come in various sizes from 100mL to 500mL capacities to accommodate different flask sizes.
3) Ace Glass offers different styles of bump traps including an elliptical shape that allows for larger flasks and a self-washing Boulanger style that prevents blow-through and enables continuous addition of solvents back to the flask.
F1024R Bench Reactor Stand
This document describes bench-top stands from Ace Glass and Caframo for supporting reactors and flasks. It provides details on several stand models including dimensions, materials, and ordering codes. The stands have adjustable feet and brackets for supporting rods and reactors from 100mL to 6L in size. Accessories like trays and additional support rods are also described.
F1023R Talboys Stirrers
Ace Glass manufactures magnetic stirrers and hotplates under the Talboys brand for various laboratory applications. Their Talboys line includes single and multi-position stirrers for volumes up to 25L with durable stainless steel or nylon plates and precision speed control from 60 to 1800 rpm. They also offer compact mini stirrers and slow speed models for cell culture applications.
F1022R Hi-Vacuum Valves
The document describes different types of hi-vacuum valves sold by Ace Glass, including 90° side-arm stopcocks, easy action stopcocks, and straight-through stopcocks. The stopcocks feature smooth operation, reference marks to aid repetitive settings, and seals made of materials like PTFE, glass, and Teflon that allow varying levels of vacuum from 10-5 to 10-9 torr. The valves isolate samples from corrosive materials and gases with replaceable plugs and non-replaceable O-ring seals.
F1021R Ace-Thred Adapters
1) The document describes various glass adapter products from Ace Glass including twin adapters, angled and offset adapters, straight-through adapters, and giant ground joint adapters.
2) The adapters come with either an Ace-Thred port or ground joint at the top and a bottom joint, and are supplied with nylon bushings and o-rings to form a seal.
3) The document provides product codes for the different sizes and styles of adapters available from Ace Glass.
More from Stephen Martinelli (20)
F1012R KNF VacuumPumps
- 1. www.aceglass.com sales@aceglass.com 1430 Northwest Boulevard P: (800) 223-4524 Vineland, NJ 08360 F: (800) 543-6752 SC 920 w/Wireless Remote Control • Fast and accurate control. • Automatic detection of boiling point. • Wireless remote. • Exceptional solvent recovery. • Quiet operation. • Easy to use and install. Specifications Flow Rate 20 l/min Vacuum 1.5 Torr (2 mbar) Power Connection 100-240 VAC, 50-60 Hz Power Comsumption Max. 135 W Hose Connection, Pneumatic I.D. 10 mm (3/8 in.) Hose Connection, Coolant I.D. 8 mm (1/4 in.) Current Consumption Max. 1.7 A Weight 15 kg (33 lb.) Dimensions H x W x D 423 x 366 x 294 mm (16.6 x 14.4 x 11.6 in.) Control Wireless Remote and Windows® -based software Order Code 13069-02 Four operating modes: • Evacuate: The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. • Pressure Control: The vacuum pump system controls and maintains the vacuum to the set value. • Automatic: The vacuum pump system automatically finds the vapor pressure of the sample. If there are any irregularities in the vacuum curve, the system will adjust the vacuum accordingly. • Individual Pressure Function: The vacuum pump system controls the process according to a user-defined vacuum curve. The setpoint vacuum and the opening and closing of the coolant valve on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed vacuum curve. At any time during an active process, you can switch to manual process control. Functions for evacuate and pressure control will be available simultaneously. QUALIT Y · INNOVATION · S ERVICE 1936 - 2016 Ace Glass Celebrating 80Years VACUUM PUMP SYSTEMwith Wireless Remote Control Create a safer work environment with RF remote control vacuum systems from KNF. Install the vacuum system under your bench or in a safety cabinet and control without the need for cable feed-throughs. Using the remote’s touchscreen and rotary knob, evacuate a chamber, maintain a pressure you set, automatically find a sample’s vapor pressure, or follow a user-defined pressure curve.
- 2. www.aceglass.com sales@aceglass.com 1430 Northwest Boulevard P: (800) 223-4524 Vineland, NJ 08360 F: (800) 543-6752 © 2016 Ace Glass, Inc. All rights reserved. 02/04/2016 F1012R Wireless Remote Control Vacuum Pump System Create a safer work environment with RF remote control vacuum systems from KNF. Install the vacuum system under your bench or in a safety cabinet and control without the need for cable feed-throughs. Using the remote’s touchscreen and rotary knob, evacuate a chamber, maintain a pressure you set, automatically find a sample’s vapor pressure, or follow a user-defined pressure curve. SC 950 w/Wireless Remote Control • Fast and accurate control. • Automatic detection of boiling point. • Wireless remote. • Exceptional solvent recovery. • Quiet operation. • Easy to use and install. Specifications Flow Rate 50 l/min Vacuum 1.5 Torr (2 mbar) Power Connection 100-240 VAC, 50-60 Hz Power Comsumption Max. 150 W Hose Connection, Pneumatic I.D. 10 mm (3/8 in.) Hose Connection, Coolant I.D. 8 mm (1/4 in.) Current Consumption Max. 1.7 A Weight 14.5 kg (32 lb.) Dimensions H x W x D 487 x 246 x 313 mm (19.2 x 9.7 x 12.3 in.) Control Wireless Remote and Windows® -based software Order Code 13069-20 Four operating modes: • Evacuate: The vacuum pump system evacuates a vacuum chamber with adjustable pump capacity. • Pressure Control: The vacuum pump system controls and maintains the vacuum to the set value. • Automatic: The vacuum pump system automatically finds the vapor pressure of the sample. If there are any irregularities in the vacuum curve, the system will adjust the vacuum accordingly. • Individual Pressure Function: The vacuum pump system controls the process according to a user-defined vacuum curve. The setpoint vacuum and the opening and closing of the coolant valve on the high-performance condenser can be easily entered for a range of set times. A repeat function allows successive repetitions of the programmed vacuum curve. At any time during an active process, you can switch to manual process control. Functions for evacuate and pressure control will be available simultaneously.