1. The document provides release notes for multiple firmware versions for a DIR-655 router with hardware version B1. 2. Several firmware versions include fixes for issues related to internet connectivity, virtual server settings, and compatibility with certain 3G adapters and devices. 3. The firmware versions range from v2.01 to v2.02 and include fixes for problems with status pages, scheduling, port filters, and access control settings.
This document is a guide to set-up Mobile App security testing environment and help performing Static and Dynamic security testing. All the information provided in this document is for educational purpose only. The author is not responsible for any misuse of the information or your bricked devices.
This document is a guide to set-up Mobile App security testing environment and help performing Static and Dynamic security testing. All the information provided in this document is for educational purpose only. The author is not responsible for any misuse of the information or your bricked devices.
In This PPT we are discussed about complete details of that product (Use,Operation, Technical details, Dimensions, Wiring, and etc..)
Please Support us and Follow our other Sites
https://automationtechplc2.blogspot.com
https://humidificationcontrol.blogspot.com
https://controlsandsystems.business.site
If you enjoyed this article, share it with your friends and colleagues.
The goal of this test plan is to test SPECTRE and MELTDOWN performance impact on Intel CPU. We will run CPU intensive workloads in Virtual Machine(s) running on non-patched and patched ESXi host and observe performance impact.
We will test impact on network, storage and memory performance because these I/O intensive workloads requires CPU caching which is impacted by vulnerabilities remediation.
Qualification of performance is very specific and hard subject. The performance impact varies across different hardware and software configurations. However, performed tests are very well described in this document so the reader can understand all conditions of the test and observed results. The reader can also perform tests on his specific hardware and software configurations.
Threading Game Engines: QUAKE 4 & Enemy Territory QUAKE Warspsteinb
This talk will briefly discuss performance threading of Quake4 and Quake Wars Engine. It will go over the issues involved parallelizing serial code, working with different backends, load balancing and design considerations. It will also offer some insight into extracting parallelism in game engines on next-generation hardware.Get a first-time look at Havok Behavior 5.5, demonstrating how the Havok Behavior Tool combines the fidelity of traditional animation assets with powerful physical and procedural animation techniques in a single creative environment. View Havok’s extensible end-to-end character content creation pipeline spanning physics, animation, and real-time behavior asset composition and conditioning.
In This PPT we are discussed about complete details of that product (Use,Operation, Technical details, Dimensions, Wiring, and etc..)
Please Support us and Follow our other Sites
https://automationtechplc2.blogspot.com
https://humidificationcontrol.blogspot.com
https://controlsandsystems.business.site
If you enjoyed this article, share it with your friends and colleagues.
The goal of this test plan is to test SPECTRE and MELTDOWN performance impact on Intel CPU. We will run CPU intensive workloads in Virtual Machine(s) running on non-patched and patched ESXi host and observe performance impact.
We will test impact on network, storage and memory performance because these I/O intensive workloads requires CPU caching which is impacted by vulnerabilities remediation.
Qualification of performance is very specific and hard subject. The performance impact varies across different hardware and software configurations. However, performed tests are very well described in this document so the reader can understand all conditions of the test and observed results. The reader can also perform tests on his specific hardware and software configurations.
Threading Game Engines: QUAKE 4 & Enemy Territory QUAKE Warspsteinb
This talk will briefly discuss performance threading of Quake4 and Quake Wars Engine. It will go over the issues involved parallelizing serial code, working with different backends, load balancing and design considerations. It will also offer some insight into extracting parallelism in game engines on next-generation hardware.Get a first-time look at Havok Behavior 5.5, demonstrating how the Havok Behavior Tool combines the fidelity of traditional animation assets with powerful physical and procedural animation techniques in a single creative environment. View Havok’s extensible end-to-end character content creation pipeline spanning physics, animation, and real-time behavior asset composition and conditioning.
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
Hardwear.io 2018 BLE Security Essentials workshopSlawomir Jasek
Bluetooth Low Energy (Smart, 4) is recently gaining more and more traction as one of the most common and rapidly growing IoT technologies. Unfortunatelly the prevalence of technology does not come with security. Alarming vulnerabilities in BLE smart locks, medical devices and banking tokens are revealed day by day. And yet, the knowledge on how to comprehensively assess them seems very uncommon.
In this workshop you will get familiar with the basics of BLE security. We will work on a dedicated, readily available BLE hardware nRF devkit device. You will learn how to program and flash it yourself, using special web interface and ready templates. Such approach allows to better understand how things work “under the hood”, experiment with different options, and then secure the hardware properly.
From attacker’s perspective, we will cover among others: sniffing, spoofing, MITM, replay and relay.
Having enough time, we will play with a collection of vulnerable smart locks, sex toys and other devices.
Research and Presentation of Bluetooth Vulnerabilities at the 23C3 in Berlin. Release of BTCrack a Bluetooth Pin cracker + FPGA Implementation. Remote Root over Bluetooth demonstration.
STONE Tech is a manufacturer of HMI display module(Intelligent TFT LCD). We provide LCD modules/LCD Displays, Graphic LCM, smart Display LCD, TFT LCM, Custom LCD Module Display, and LCD panels. china LCD Manufacturers.
Outdoor LED Billboard IPC --- function introductionMax Dan
One:WiFi/ X86 computer architecture, wireless way for the Bluetooth /3G (similar to Internet cafes in the wired way to change the way)
Two: IPC LED hardware appearance and profile (detailed internal structure and operating instructions see IPC LED manual)
Contact:
Rettar Du
General Manager
Ocolour Technologies Co., Limited
Tel: +86-755-2691 5212
Fax: +86-755-6160 5212
Web: www.ocolour.com
Email/Skype: info@ocolour.com
Mob/Whatsapp: +86-186 6458 8467
Add: Huamei Rd., Songgang Ave.,
Songgang Town, Bao’an District, Shenzhen, China
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
IBC2022: Tips for Media-over-IP Network DesignKoji Oyama
This presentation provides you the design flow and some common pitfalls when broadcast network engineers consider their Media-over IP (MoIP) network architecture and configure its network switches. In addition to the essential technology such as VLAN, VRF, IGMP, PIM, and OSPF I introduced at the NAB 2022 IPShowcase, you can also know how to verity the network design, some issues that have happened in the design so far, and some key points you should be careful about your logical design.
Samsung s8 Custom binary blocked by ERP lock and NMR Recovery Steps (1) (1).pdf
DIR655B1_FW_ReleaseNote
1. Project Name: DIR-655
HW version: B1
Region code: EU
WLAN Domain: 0x30/ETSI
Channel List 2.4G: 1, 2, 3, 4, 5, 6, 7, 8 ,9, 10, 11, 12, 13
Firmware Query URL:
http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DIR-655_Bx_Default
Flash size: 8MB
DRAM size: 64MB
Algorithm: New Algorithm
Reference Mac: Wan Mac.
========================================================================
Release notes history.
Firmware Version: v2.02 Build: 09Beta02
Firmware Date: 22, Sep 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x3358DE75
Problem Resolved:
1. Fixed status page and internet connection LED of PPPoE
2. Fixed webUI setting schedule in Access Control page
3. Fixed weburl log when selected other machine in Access Control
Firmware Version: v2.02 Build: 09Beta01
Firmware Date: 21, Sep 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x33627B17
Problem Resolved:
1. Optimize URL filter
2. Change sessions to 16000
Firmware Version: v2.02 Build: 09
Firmware Date: 11, Aug 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x351549F1
Problem Resolved:
1. Update to v2.02b09 for official release.
Firmware Version: v2.02 Build: 08Beta07
Firmware Date: 10,Aug 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x3517F14F
Problem Resolved:
1. Fixed: base on last version item 1, the “port filter” can’t be work when WAN type is
pppoe.
2. Firmware Version: v2.02 Build: 08Beta06
Firmware Date: 09,Aug 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x33DC7017
Problem Resolved:
1. Fixed web browser can’t access to internet, when setup some steps in Access Control
page, the setup steps as below
a. Choose “Other Machine
b. Choose “Block Some Access” and enable “Apply Advanced Port Filters”
c. setup port filter rules to block all ports except TCP 80, 443 and UDP 53
2. Fixed “allow pc”(as policy 2) can’t access to internet ,on Access control function,
setup some Restricted Website as below and setup policy 1. Block all PC to access
those restricted website and policy 2. that Allow an IP 192.168.0.101 to access to All
Websites without any restriction
www.facebook.com
www.friendster.com
www.jobstreet.com.sg
Firmware Version: v2.02 Build: 08Beta05
Firmware Date: 12,Jul 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x3494C427
Problem Resolved:
1.Added the ipv6-firewall page to support multi-language
Firmware Version: v2.02 Build: 08Beta04
Firmware Date: 12,Jul 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x33699120
Problem Resolved:
3. Fix WAN type set static IP will cause NTP function fail.
Firmware Version: v2.02 Build: 08Beta03
Firmware Date: 07,Jul 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x335F2B86
Problem Resolved:
3. 4. Fix WAN type set static IP will cause NTP function fail.
Steps 1. Reset to Default, setup with Static IP wan mode and then save.
Steps 2. Change timezone, enable NTP Server option.
Steps 3. Check the time, It’s correct.
Steps 4. to System page, click reboot button
Steps 5. wait to complete, and then go to Time page
Result : Time do not update.
Firmware Version: v2.02 Build: 08Beta02
Firmware Date: 30,Jun 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x336A273E
Problem Resolved:
1. Fix virtual server issue : set a virtual rule and SAVE change, and then disable
previous virtual server rule, leave blank for “Name” and “IP Address” and
“Uncheck”, SAVE change, After finish LAN PC can’t access to internet.
Firmware Version: v2.02 Build: 08
Firmware Date: 23,Jun 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x34894220
Problem Resolved:
1. Fix oray status can’t refresh automatically.
2. Fix RTSP can’t work with Ericsson MOD-2 Trial test.
Firmware Version: v2.02 Build: 08Beta
Firmware Date: 17,Jun 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x3341EB8B
Problem Resolved:
1. Fix Atheros Driver addba action frame issue with SONY TV.
2. Fix RTSP issue with Darwin streaming server.
3. update IPv6 code to the newest.
4. Fix Teredo server issue.
5. Fix IGMP frames to wlan.
Firmware Version: v2.02 Build: 07Beta02
Firmware Date: 8,Jun 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x34B40B8E
Problem Resolved:
1. Add ALG item
4. Firmware Version: v2.02 Build: 07Beta01
Firmware Date: 8,June 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x3321B642
Problem Resolved:
1. Fix Atheros Driver addba action frame issue with SONY TV.
Firmware Version: v2.02 Build: 07Beta
Firmware Date: 12,May 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0050, Date: Tue, 10, May, 2011
CheckSum: 0x33469F5A
Problem Resolved:
1. Fix Vitual Server with schedule Fail when schedule name have blank.
Firmware Version: v2.02 Build: 06
Firmware Date: 06,May 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x333FE62B
Problem Resolved:
1. TOOLS DDNS add IPv6 DDNS
2. Fix MTU issue
3. Different Configuration don’t need restore to default.
Firmware Version: v2.02 Build: 05Beta
Firmware Date: 20, Apr 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x334E573A
Problem Resolved:
1. SharePort and printing problem with a Canon MP360
Firmware Version: v2.02 Build: 04
Firmware Date: 20, Apr 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x33267899
Problem Resolved:
1. Routing rules and WAN status issue : if set more routing rules than 25, the
WAN status display incorrect. And it cause DUT cant browser internet.
Firmware Version: v2.02 Build: 04Beta
Firmware Date: 15, Apr 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
5. CheckSum: 0x330A92B2
Problem Resolved:
1. 3G adapter DWM-156 A3 couldn't connect issue.
Test Steps
(1). Restore DUT to default
(2). Configured internet as 3G
(3). Plug-in DWM-156 A3
(4). Make sure lan client could connect to internet
(5). TOOLS-> SYSTEM -> Reboot the Device
(6). DUT couldn't connect internet
Firmware Version: v2.02 Build: 03Beta
Firmware Date: 13, Apr 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x330BFE97
Problem Resolved:
1. 3G adapter DWM-156 A3 couldn't connect issue.
Test Steps
(7). Restore DUT to default
(8). Configured internet as 3G
(9). Plug-in DWM-156 A3
(10). Make sure lan client could connect to internet
(11). Try to power off then power on DUT
(12). DUT couldn't connect internet
Firmware Version: v2.02 Build: 02
Firmware Date: 01, Apr 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x331C270B
Problem Resolved:
1. Fix nvram configuration version control when upgrade new firmware
2. Fix can not eliminate none zero bits that behind prefix_len in 6rd prefix
Firmware Version: v2.02 Build: 01
Firmware Date: 29, Mar 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x3311891A
Problem Resolved:
1. Support IPv6 Spec 1.16R(Not support IPv6 Multicast stream)
2.Add status IPv6 routing table
3.Support DNSSL (RFC6106)
Firmware Version: v2.01 Build: 10
Firmware Date: 4, Mar 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
6. CheckSum: 0x3202E6A1
Problem Resolved:
1. Remove ipv6 auto detect item.
2. Add log for sending mail.
Firmware Version: v2.01 Build: 09
Firmware Date: 3, Mar 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x31FC0B3E
Problem Resolved:
1.fix https bug.
2.fix Oray DDNS problem.
Firmware Version: v2.01 Build: 08
Firmware Date: 1, Mar 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0049, Date: Fri, 25, Feb, 2011
CheckSum: 0x32051446
Problem Resolved:
1.Support 3G dongle DWM-156A2.
2.Syslog didn't display update log for oray ddns.
3.Access control and log issue :
Fix When select the filtering method as "Block All Access", the rule "Logged"
display "Yes" in Policy Table.
4."Don't Save Setting" button didn't work in "SETUP->USB SETTING" issue
Test Steps as below,
(1). Configured "My USB type" as "SharePort" then click "Save Settings" button.
(2). After the configuration be saved then try to select another type, such as "WCN
Configuration"
(3). Click "Don't Save Settings" button, it didn't pop-up any message.
(4). Click another function, such as "WIRELESS SETTINGS", it also didn't pop-up
any message.
5."Don't Save Setting" behavior issue in SETUP -> INTERNET
Test Steps as below,
(1). Restore to Default.
(2). Change WAN type to others from DHCP mode.
(3). Input any settings INFO.
(4). Click "Don't Save Settings" button.
The settings page SHOULD change back to old settings page. (DHCP mode)
Notes,
Configured WAN type to another types then changed to different WAN type also has
this issue.
6.Remove PPPoe pass through
7. 7.Enhance the throughput of PPPoE pass through.
Firmware Version: v2.01 Build: 07
Firmware Date: 27, Jan 2011
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0048, Date: Thu, 27, Jan, 2011
CheckSum: 0x31E872F6
Problem Resolved:
1.Support Oray DDNS.
Firmware Version: v2.01 Build: 06
Firmware Date: 23, Dec 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0046, Date: Thu, 23, Dec, 2010
CheckSum: 0x3358D8E0
Problem Resolved:
1.Support 3G dongle DWM-156A2.
Firmware Version: v2.01 Build: 05
Firmware Date: 15, Nov 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0043, Date: Thu, 11, Nov, 2010
CheckSum: 0x3341111A
Problem Resolved:
1.Fixed: The login timeout failed. (It can access web page when key in webpage
name (ex. lan.asp))
2.Fixed: There is change IP address notification when save MAC filter and
Schedule.
3.Fixed: Date format display issue on Information firmware.
Firmware Version: v2.01 Build: 04
Firmware Date: 10, Nov 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0042, Date: Tue, 09, Nov, 2010
CheckSum: 0x3336A8B9
Problem Resolved:
1.Fixed TCP connection be disconnected when Enable SPI
2.Follow SPE ChklstForMP_v114, change language pack version in chklst.txt
3.Fixed TSD#7: IP 0.0.0.0 is displayed in Status-> LAN Computer.
4.Fixed TSD#8: Website filter 'allow' URL/Domain can not given empty.
5.Fixed TSD#14:Description issue for Setup -> Internet -> L2TP at Support menu.
6.Fixed TSD#17: Schedule be disabled issue at E-mail Settings.
7.Fixed TSD#19: WAN LED bright incorrect issue.
8. 8.Fixed TSD#20: Tcp port scan fail in port 0 and 1 by using
www.grc.com/default.htm test tool.
9.Fixed TSD#23: When WAN type is PPPoE and then Enable/Disable QoS function,
the count-down value is only 15 seconds. The GUI CAN'T change direction correct.
10.Fixed TSD#24: When modified Schedule rule, the behavior incorrect
11.Fixed TSD#25: Guset Zone security issue.
12.Fixed TSD#26: Website filter rules: Only the first tenth entries on both columns
work.
13.Fixed TSD#29: Network filter issue with Wireless client setting as static IP
14.Support Configuration Version Control.
Firmware Version: v2.01 Build: 03
Firmware Date: 21, Sep 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0038, Date: Tue, 21, Sep, 2010
CheckSum: 0x339AAA15
Problem Resolved:
15.Fixed TCP connection be disconnected when Enable SPI
16.Follow SPE ChklstForMP_v114, change language pack version in chklst.txt
old:Language-Version: verWW.XXbZZ
new: Language-Version: verWW.XXYYbZZ
YY: language
17.Fixed TSD#7: IP 0.0.0.0 is displayed in Status-> LAN Computer.
18.Fixed TSD#8: Website filter 'allow' URL/Domain can not given empty.
19.Fixed TSD#15:
Firmware Version: v2.01 Build: 02
Firmware Date: 15, Sep 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0037, Date: Wed, 15, Sep, 2010
CheckSum: 0x33A01FF4
Problem Resolved:
1.Modify "Checksum" to "checksum" in chklst.txt
2.Fixed bug: URL with capitalization cannot be blocked.
Firmware Version: v2.01 Build: 02Beta
Firmware Date: 10, Sep 2010
Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0036, Date: Fri, 10, Sep, 2010
CheckSum: 0x33BE27D7
Problem Resolved:
1. Fixed can not support special character password and security for HNAP.
Firmware Version: v2.01 Build: 01
Firmware Date: 31, Aug 2010
9. Hardware: B1
KERNEL version: 2.6.28,SDK: 1.0, Build: 0035, Date: Tue, 31, Aug, 2010
CheckSum: 0x3393106F
Problem Resolved:
1.Follow the SPEC for D-link HNAP support the special character.
2.Fixed routing page can't save setting without typing any rule name.
3.Update Kcodes lib to support USB and Fixed the USB Led can’t blink.
Firmware: v2.00 Build: 08Beta03
Hardware: B1
Date: 24, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0034, Date: Fri, 13, Aug, 2010
CheckSum: 0x34F31C2C
1. Fixed bug: IPv6 PPPoE can not save IPv6 address range.(Stateful DHCPv6)
Firmware: v2.00 Build: 08Beta02
Hardware: B1
Date: 19, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0034, Date: Thu, 13, Aug, 2010
CheckSum: 0x34F3651A
1.Fixed bug: IPv6 Static mode : no send RA packet .
2.Fixed bug:IPv6 PPPoE (Share with IPv4) no show wan / gateway ipv6 address after
connected and dns address
3.Fixed bug:IPv6 PPPoE (create a new one ), Manual mode , use the following DNS
address don’t work
4.Fixed bug:Fixed bug:IPv6 PPPoE (Share with IPv4),no way to connect after disconnect
5.Fixed bug:6rd fail
Firmware: v2.00 Build: 08Beta01
Hardware: B1
Date: 18, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0034, Date: Thu, 13, Aug, 2010
CheckSum: 0x34F29510
6.Fixed bug:static / autoconfiguarion mode , IPv6 DNS SETTINGS can't change to "use the
following DNS address"
7.Fixed bug:6rd IPv6 Prefix field can only enter the 9-bit uplink
8.Fixed bug:IPv6 PPPoE (create a new one ) don't work
9.Fixed bug:IPv6 PPPoE (Share with IPv4),no way to connect after disconnect
10. 10.Fixed bug:IPv6 PPPoE (create a new one ) button erro
Firmware: v2.00 Build: 08Beta
Hardware: B1
Date: 13, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0034, Date: Thu, 13, Aug, 2010
CheckSum: 0x34E47126
11.Support IPv6 Spec 1.12R
Firmware: v2.00 Build: 07
Hardware: B1
Date: 12, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0033, Date: Thu, 12, Aug, 2010
CheckSum: 0x3373A109
1.Fix bug:QRS v5.04b06 dns ip can’t be shown in wan status.
2.Fix bug:DCC 4.0 auto-channel check mark be removed after set wireless security via DCC, but
wireless channel still use auto-channel function.
Firmware: v2.00 Build: 06
Hardware: B1
Date: 12, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0033, Date: Thu, 12, Aug, 2010
CheckSum: 0x33981778
1.Fix QRS v5.04b06 and DCC v4.0 failed when set wan setting.
Firmware: v2.00 Build: 05
Hardware: B1
Date: 04, Aug 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0031, Date: Wed, 04, Aug, 2010
CheckSum: 0x3373A109
1.Fix QoS will let wan on demand not work.
2.Fix guest zone ssid has special character, "STATUS/DEVICE INFO" display error.
3.Fix ddns failed when DDNS Server Address is upper case string.
4.Fix Port Forwarding TCP and UDP port not single one, the configuration couldn't be
saved.
5.Fixed Language-Version info in chklst.txt issue.
6.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for
IPv6 firewall should start from "1"
7.Test DCC 4.0
11. Firmware: v2.00 Build: 04
Hardware: B1
Date: 29, Jul 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0030, Date: Thu, 29, Jul, 2010
CheckSum: 0x3375B924
1.Fixed bug: WISH can’t work.
2.Fixed bug: USB Setting and WISH can’t show help file.
3.Fix sometimes display wrong name for LAN Computers at "STATUS/DEVICE INFO"
4.Fixed BT issue. Start BT and run 7 hours , DUT WAN will disconnected then connected
again.
5.Add European 3G ISP list.
6.Follow Specification of D-Link AP and Router Reset and Recovery Mode v1.0
Restore to factory default after reset button is pressed 5 seconds.
7.add USB 3G support DWM-152/156A3
8.Fixed WLAN PC's(static IP) hostname can not displayed for LAN Computers at
"STATUS/DEVICE INFO".
9.Fixed version.txt needs login and chklst.txt does not need to login.
10.Fixed GuestZone SSID not display on Device Info when SSID include special
character().
11.Fix wrong strings "Low/option>" for "Transmit Power" at "Advanced Wireless
Settings".
12.Fix bug: Wireless setting can not saved after save the configuration file.
13.Fix bug: Wireless wizard security 64 describes display error.
14.Fix bug: WCN configuration saves failed.
15.Fix bug: USB settings cannot save when 3G change to network/WCN.
16.Fix bug: Default port number issue for IPv6 firewall(TSD),The default port range for
IPv6 firewall should start from "1"
17.Fix bug: IPv6 firewall all not work when schedule applied at any of rule.
18.Fix bug: DDNS not check public IP(DLinkDDNS.com/No-Ip.com)
19.Fix bug: QRS can save advanced DNS.
20.Add Language Pack info in chklst.txt.
Firmware: v2.00 Build: 03
Hardware: B1
Date: 09, Jul 2010
Firmware Version: ver2.00b03
Firmware Date:Fri, 09,Jul, 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0029, Date: Fri, 9, Jul, 2010
CheckSum: 0x33789CE9
1.Support IPv6 spec 1.10
2.Fix the blank characters in port settings at port forwarding function,it will casue router
NAT failed.
3.Fix warning message display incorrect for settings Device Name in lan.asp
4.Fix the blank characters in port settings at port forwarding function,it will casue router
NAT failed.
12. 5.IP address for Wake-On-LAN function should allow "x.x.x.255" to be saved
6.Remark printk MTD_KERN_NOTICE
7.Fix DCC security hole : users can set and get setting or reboot from DCC protocol.
Firmware: v2.00 Build: 02
Hardware: B1
Date: 11, Jun 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0026, Date: Fri, 11, Jun, 2010
CheckSum: 0x31FCDED4
1.Fix bug - 3G can not work.
2.Fix bug - Guest zone GUI issue on WPA-PSK/EAP mode after saved settings.
3.Fix bug - Guest Zone Routing between Zones enable, Guest clients can access Ethernet (Host)
clients but cannot access Wireless (Host) clients.
4.Fix bug - Failed to add the wireless device messenger not follow spec, should be: If users fail to
press the button, display the below message and let users to do it again.
5.Fix bug - SMTP Server Port default is empty at Email settings - please reset to default.
6.Fix bug - QoS page not WISH item on Left-Menu.
7.Fix bug - Wireless LED solid green when Internet port plugs in cable.
8.Fix bug - Network Status connect/disconnect should be +"ed" on IPv6/Status.
9.Fix bug - XMLAgent: dhcp_server (no dhcpd_domain_name value)
10.Fix bug - QRS can save advance DNS settings.
11.Fix bug - wireless page will show security key from page source.
12. Fix bug - There is no status note at DDNS support (help file) via SPEC1.05.
13. Fix bug - Port range warning message error at WISH page.
14. Fix bug - User account can control firmware page.
15. Fixed the Wireless LED gpio behavior issue. When connect wireless, let Wireless LED
blink.
Firmware: v2.00 Build: 01
Hardware: B1
Date: 01, Jun 2010
Firmware Version: ver2.00b01
Firmware Date:Tue, 01,Jun, 2010
KERNEL: 2.6.28
SDK: 1.0, Build: 0024, Date: Tue, 01, Jun, 2010
CheckSum: 0x31E19FB4
1. New released wireless router firmware.
8.Supporting non-zero MAC ID.
9.Supporting DLink 404
10.Supporting 12/24 time format
11.Supporting SharePort/Kcode
12.Supporting http://router.dlink.com
13.Remove advanced DNS service
14.pass HNAP tool