Deva Kumar Ande has over 7 years of experience as a service engineer specializing in environmental testing chambers. He has worked with design teams to define test strategies and procedures and has experience setting up, operating, and maintaining environmental test equipment from Japan and the USA. Some of his responsibilities include assisting with test preparation and execution, maintaining the test laboratory, collecting and reporting test data, and ensuring customer requirements are met. He aims to support engineers in design validation and verification through accurate testing.
Ansys Reliability Engineering Services (RES) is the leader in delivering comprehensive reliability solutions to the electronics industry. Ansys RES leverages a team of reliability experts with a 20,000 sq. ft. laboratory to accurately predict the robustness of a device and investigate failures through physical testing and analysis paired with simulation and modeling. Ansys RES routinely helps clients improve product reliability, time-to-market and customer satisfaction.
Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.
Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
Involved in Equipment & Instrument selection and procurement activities
Commissioning Experience of Testing Lab
Having good working knowledge with different sensors and Instrumentation
Hand on experience in designing signal conditioning and driver hardware circuits
Good team player, keen learner, problem solving ability and effective communicator
Experience with electronic circuitry (Analog/Digital)
Fluent in schematics diagram/circuitry and components specs.
Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
Installing Production Support Software’s and Application tool.
Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.
Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.
Report bugs to developers and maintains documentation of test results and ensure closure.
Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
Ansys Reliability Engineering Services (RES) is the leader in delivering comprehensive reliability solutions to the electronics industry. Ansys RES leverages a team of reliability experts with a 20,000 sq. ft. laboratory to accurately predict the robustness of a device and investigate failures through physical testing and analysis paired with simulation and modeling. Ansys RES routinely helps clients improve product reliability, time-to-market and customer satisfaction.
Undergone on-job training in various streams of Test (Labview & Test stand Application development,NPI, Test Engineering, Manufacture Engineering and Diagnostic Engineering) for a period of a year in last 13 years.
Very Strong Programming knowledge in LabVIEW – NI-DAQ - Teststand
Hand on experience in executing project with NI DAQ system (PCI,PXI NI-DAQ,
RS-232 and GPIB instruments
Involved in Equipment & Instrument selection and procurement activities
Commissioning Experience of Testing Lab
Having good working knowledge with different sensors and Instrumentation
Hand on experience in designing signal conditioning and driver hardware circuits
Good team player, keen learner, problem solving ability and effective communicator
Experience with electronic circuitry (Analog/Digital)
Fluent in schematics diagram/circuitry and components specs.
Deploy myself to Plan, establish, and maintain Test & Debug setup in India Factory and get certified by the customer.
Installing Production Support Software’s and Application tool.
Follow quality policies like “Gauge Repeatability & Reproducibility (GRR), Calibration, Correlation principles” for qualifying the test setup.
Maintain DPHU (Defects per Hundred units) rate under control, yield rate, production down time by stabilizing the test setup and troubleshooting the problems that arise during the production.
Report bugs to developers and maintains documentation of test results and ensure closure.
Knowledge to handle and utilize compensate techniques in ICT (Agilent i3070).
SUMMARY OF SKILLSAn experienced professional with a divers.docxpicklesvalery
SUMMARY OF SKILLS
An experienced professional with a diversified skill set, demonstrated knowledge, and proven leadership skills. Perform as a cooperative team player focused on exceeding objectives, achieving immediate/long term goals, and meeting operational deadlines. An industrious mission-support/ project management professional with the ability to provide operational support in government and/or corporate environments. Perform well under challenging and rigorous conditions. Possess the highest level of integrity, professionalism, perseverance, and personal accountability. Proficiency in 3 written/spoken languages (English, French and Haitian Creole) and possess superior verbal/written, interpersonal & communications skills, presentation skills & analytical skills.
· Over 6 years’ experience assembling, troubleshooting, repairing and effectively maintain hardware configurations and electronics aviation support equipment. Performed electronics, electrical, mechanical, sheet metal and hydraulic work on board USS Iwo Jima (lhd-7) and USS George Washington (CVN-73).
· Experience with software programs including MS Office (Word, Excel, Power Point, Project, Access, and Outlook), PeopleSoft, Oracle, QuickBooks, and Windows. Familiar with Agile, SAP, Math lab, Minitab, Multisim Electronics software, and Packet Tracer networking software.
· Technical skills include analog and digital electronics, schematics (reading and drawing), oscilloscopes, LC filters, function generators, rectifiers, network analyzers, transistors, JFET, capacitors, microscope-level testing, MOSFETS, diodes, YIG technology and hardware configuration. Ability to read and interpret (Geometric Dimensioning and Tolerance (GD&T) and Electrical drawings), troubleshoot automated control panels. Knowledge of PLC programming and AutoCAD. Also familiar with UL 508 and 698 control panels. Quick to master new skills.
· Knowledge of the standards, methods and processes used for the development, production, management, and revision of drawings and other design documents, including ability to use CAD Micro station equipment and software tools.
· Knowledge of FDA (21 CFR Part 820) and ISO 9000, 9001 & ISO 13485:2003. Process Review, Product Examination and Quality Management System Audit. Knowledge of Continuous improvements process and implementation of lean manufacturing initiatives: lean, six sigma, gage R&R concepts, Kaizan, 5s and statistical analysis.
EDUCATION / TRAINING COURSES
November 2009-2011 ECPI College of Technology Newport News, VA
Bachelor Degree in Electronics Engineer
Major: Electronics Engineer GPA: 3.50
December 2007 ECPI College of Technology Virginia Beach, VA
Associates Degree in Computer and Information Science
Major: Biomedical Equipment RepairGPA: 3.32
INTERNSHIP EXPERIENCE
Portsmouth Naval Hospital Portsmouth, VA
October 2007-November 2007
Completed 135 internship hours
· Performed preventativ ...
1. CURRICULUM VITAE
DEVA KUMAR ANDE
Contact No : 0564691158
devakumar.ande@gmail.com
Expertise : ETC –Service Engineer
Experience : 7+ Years
Career Objective
To support environment engineers in the preparation, performance and reporting of design
assurance, qualification and certification testing in accordance with internal/external
customer requirements and business needs, whilst meeting quality, cost and schedule
requirements.
Professional Summary
• Experience on Japan and USA Environmental climatic chambers.
• Liaise with design engineering teams to agree and define test strategies and
procedures
• Strictly follow test procedures in the execution of required tests
Set-up and operation of environmental test equipment
• Assist environmental test team in the preparation and execution of test regimes
Support in the maintenance and control of the environmental test laboratory.
• Log all test data and results
• To ensure proper operation and maintenance of test equipment and PC in
laboratories (Software and Hardware) in association with the concerned service
• Support of design engineering team to achieve robust design validation and
verification using accurate and representative test techniques.
• Support project manager, to meet the required project timescales and budgetary
requirements.
• Ensure customer requirements and expectations are met.
• Experience of working within test laboratory, working with oven, climatic chambers,
etc.
• Self-sufficient in the execution of environmental test regimes and able to guide or
propose improvements.
• Able to independently and accurately compile test reports.
• Ability to design and optimize test fixtures and test set-ups.
• On site validation testing and performance mapping
2. Educational Qualification:
QUALIFICATION COLLEGE/INSTITUTE YEAR PERCENTAGE
B.TECH Khader Memorial College of Engineering 2008 65%
DEEE
Sri VasavikanyakaParameshwari
Polytechnic
2004 61%
SSC RCM high School, Guntur 2000 69%
Experience Summary
• Working as Service Engineer in SAMS Advance Climatic Technologies Pvt Ltd from
2008 – till date [7+ Years].
Skills Summary
Equipment Startup Technical Support Equipment relocation
Preventive Maintenance MSDS Preparation
Installation &
Commissioning
Refrigerant Modification Instrumentation Upgrades
Temperature & Humidity
assessment
Instrument Calibrations
Emergency Service
Handling
Refrigeration retrofits
Equipment Modification Part replacement Training Services
AMC Follow ups Customer satisfaction Progress & Design reviews
Endurance Testing,
Vibration and
Mechanical Shock
Data acquisition, Signal
processing & Analysis tools
Understanding of
the environmental life cycle
3. Personal Details
Name : Deva Kumar Ande
Date of Birth : 16 November 1983
Father’s Name : Yesuratnam
Mother’s Name : Nayomi
Passport No. : L7095779
Passport date of issued : 11/02/2014
Passport date of Expiry : 10/02/2024
Presently staying : In Dubai ,Hor al anz
RESIDENCIALADDRESS:
RB 45 BESIDE, FILTER HOUSE , NAGARJUNA SAGAR , VIJAYAPURI SOUTH
,GUNTUR ,
PIN:522439 ,ANDHRA PRADESH, INDIA.
Languages known
To read : English,Hindiand Telugu
To write : English,Hindi and Telugu
To speak : English, Hindi, Teluguand Kannada
Declaration:
I hereby declare that all the information mentioned above is true to the best of my knowledge.
Deva kumarAnde