Joe Greaves is an experienced Electrical Engineer with over 10 years experience working in the mining industry. He holds qualifications including an HNC/HND in Electrical and Electronic Engineering. His career includes roles as a Class 1 Electrical Craftsman, Infrastructure/Face Electrician, Heading Electrician, and Face Electrician. He has experience installing, maintaining, and repairing electrical equipment while ensuring safety and regulatory compliance. He is seeking a new challenging opportunity to make use of his skills and continue developing professionally.
Qualified senior engineer with 5 years of progressive experience in analysis, setup, implementation, maintenance, repair of medical equipment, facilities, and support systems. Possess exceptional team building and leadership skills, as well as interpersonal relations, written and verbal communication abilities. Service Engineer with strategic planning, and cost-benefit analysis capabilities.
Qualified senior engineer with 5 years of progressive experience in analysis, setup, implementation, maintenance, repair of medical equipment, facilities, and support systems. Possess exceptional team building and leadership skills, as well as interpersonal relations, written and verbal communication abilities. Service Engineer with strategic planning, and cost-benefit analysis capabilities.
SUMMARY OF SKILLSAn experienced professional with a divers.docxpicklesvalery
SUMMARY OF SKILLS
An experienced professional with a diversified skill set, demonstrated knowledge, and proven leadership skills. Perform as a cooperative team player focused on exceeding objectives, achieving immediate/long term goals, and meeting operational deadlines. An industrious mission-support/ project management professional with the ability to provide operational support in government and/or corporate environments. Perform well under challenging and rigorous conditions. Possess the highest level of integrity, professionalism, perseverance, and personal accountability. Proficiency in 3 written/spoken languages (English, French and Haitian Creole) and possess superior verbal/written, interpersonal & communications skills, presentation skills & analytical skills.
· Over 6 years’ experience assembling, troubleshooting, repairing and effectively maintain hardware configurations and electronics aviation support equipment. Performed electronics, electrical, mechanical, sheet metal and hydraulic work on board USS Iwo Jima (lhd-7) and USS George Washington (CVN-73).
· Experience with software programs including MS Office (Word, Excel, Power Point, Project, Access, and Outlook), PeopleSoft, Oracle, QuickBooks, and Windows. Familiar with Agile, SAP, Math lab, Minitab, Multisim Electronics software, and Packet Tracer networking software.
· Technical skills include analog and digital electronics, schematics (reading and drawing), oscilloscopes, LC filters, function generators, rectifiers, network analyzers, transistors, JFET, capacitors, microscope-level testing, MOSFETS, diodes, YIG technology and hardware configuration. Ability to read and interpret (Geometric Dimensioning and Tolerance (GD&T) and Electrical drawings), troubleshoot automated control panels. Knowledge of PLC programming and AutoCAD. Also familiar with UL 508 and 698 control panels. Quick to master new skills.
· Knowledge of the standards, methods and processes used for the development, production, management, and revision of drawings and other design documents, including ability to use CAD Micro station equipment and software tools.
· Knowledge of FDA (21 CFR Part 820) and ISO 9000, 9001 & ISO 13485:2003. Process Review, Product Examination and Quality Management System Audit. Knowledge of Continuous improvements process and implementation of lean manufacturing initiatives: lean, six sigma, gage R&R concepts, Kaizan, 5s and statistical analysis.
EDUCATION / TRAINING COURSES
November 2009-2011 ECPI College of Technology Newport News, VA
Bachelor Degree in Electronics Engineer
Major: Electronics Engineer GPA: 3.50
December 2007 ECPI College of Technology Virginia Beach, VA
Associates Degree in Computer and Information Science
Major: Biomedical Equipment RepairGPA: 3.32
INTERNSHIP EXPERIENCE
Portsmouth Naval Hospital Portsmouth, VA
October 2007-November 2007
Completed 135 internship hours
· Performed preventativ ...
Upskill with PMV to Start a Career in Instrumentation and Control.pdfProjectManagementVis
With the growing popularity of a career in instrumentation and control, it is essential to combine your engineering knowledge or electrical trade skills with practical instrumentation & control skills.
Fairdeal Power is hiring fresh talent(Btech Electrical/Electronics) Batch 2016 Salary 2.4 lacs to 3.2 lacs,please mail us hr@fairdealpower.com or call us @8528476050(Sanjeev Sharma),,,,
Fairdeal Power is hiring fresh talent(Btech Electrical/Electronics) Batch 2016 Salary 2.4 lacs to 3.2 lacs,please mail us hr@fairdealpower.com or call us @8528476050(Sanjeev Sharma),,,,
1. Joe Greaves
36 Stratton Road, Bolsover, Chesterfield, Derbyshire. S44 6DR.
Telephone: 07979 606482 (Mobile); Home: 01246 822040
Email: joe934@btinternet.com
Professional Profile
A resourceful, hardworking and dedicated Electrical Engineer, with over ten year’s engineering expertise in
the mining industry. High Voltage authorised and trained with the ability to demonstrate excellent leadership
and knowledge of health and safety guidelines. Able to work effectively independently and as part of a
productive team, demonstrating the motivation and multi- tasking abilities required to achieve demanding
deadlines.
Objective
I am currently looking for a new and challenging opportunity, one which will make best use of existing skills
and qualifications whilst enabling further personal and professional development.
Career Summary
2003 – Date Class 1 Electrical Craftsman, UK Coal, Thoresby Colliery
• Personally tasked with the installation, maintenance and repair of electrical equipment.
• Successfully achieving time served apprenticeship and progression to HND qualification with
responsibility for the examination and signing off of equipment on the PM scheme.
• Safely operating electrical plant equipment in accordance with Health and Safety procedures, methods
of work, risk assessments, Planned Job Instruction Sheets and the Permit to Work procedures.
• Complying with company’s requirements by following instructions and accurately documenting
activities, carrying out specified testing to improve the process yield and quality.
• Complying with company’s policies, safety and environmental requirements to ensure equipment
performance and process continuity are maintained.
• Demonstrating effective problem solving through using experience and diagnostic skills to identify
equipment and process problems and identify modes of failure, deviations or root causes.
• Ensuring accurate documentation through completing records accurately and in a timely manner
ensuring compliance with policies, laws and regulations, collaborating with various teams and experts.
• Playing a pivotal role in improvement projects by assisting with the installation and upgrading of
equipment as well as with the development of operating procedures together with a team of six including
a mechanical and a deputy supervisor.
• Working within safety guidelines including operating and maintaining the plant in accordance with the
H&S department, reporting of incidents and participating in root cause investigations of
countermeasures to prevent recurrence.
• Utilising information technology through using process control system and business systems to support
administrative tasks and reacting in a timely manner to changes by using various techniques.
• Developing training plans, sharing specialist skills and information gained through experience to others,
coaching and mentoring colleagues and receiving the same from superior technicians.
Key Achievements
• Directly contributing to improving productivity through the maintenance of machines.
• Installation projects for production, development and infrastructure areas of the company.
2014 – 2015 Infrastructure/Face Electrician (Production)
• Conveyor and infrastructure electrician responsible for the safe installation, commissioning and
systematic inspection, examination, testing and maintaining of the equipment including PLCs and PLC
controlled equipment, plant and machinery.
• Production electrician
Page 1
2. Career summary continued…………………………………………………………………………………………….
2010 – 2014 Heading Electrician (Tunnelling)
• Managing engineering activities ensuring that all equipment is safely installed and commissioned and
then systematically inspecting, examining, testing and maintaining ensuring that an acceptable quality
levels are maintained and quality documentation is filled in accurately, effective team co-operation, with
a requirement to work overtime and shifts as and when required
• Supporting and developing the health, safety and environmental culture, supporting the site in delivering
the requirements of its stakeholders and delivering world class engineering standards and perform
2008 – 2010 Face Electrician (Coal Production)
• Ensuring that an acceptable quality levels are maintained and quality documentation is filled in
accurately, effective team co-operation, with a requirement to work overtime and shifts as and when
required
• Recording exact time against relevant jobs, assisting in the identification of future training needs and
identifying and reporting of any noticeable defects to equip maintenance
2004 – 2008 Mining Electrical Craftsman Apprenticeship
Professional Development
Safety courses approved by IOSH
HV Test Equipment trained
Permit to Work system authorised including isolation for self and others.
Education and Qualifications
HNC/HND
NVQ 2
Electrical and Electronic Engineering with Distinction (2013)
Mining Operations (2010)
Class 1 HSE Electricians Certificate (2009)
Advanced Electrical Craftsman (Mining) (2008)
NVQ Level 3
BTEC
Engineering Maintenance Electrical (2006)
Engineering (2006)
NVQ Level 2
Level 2
Performing Engineering Operations (2005)
Key Skills Application of Number and Key Skills IT (2005)
NVQ Level 4 AAT Accounting Technician (2002)
3 A Levels
8 GCSEs
Including Mathematics (2000)
Including English and Mathematics at Grade A – C (1998)
Personal Details
IT Proficiency: Microsoft Office Suite
Driving Licence:
Interests include:
Full/Clean
Family, Football, Fishing and Horseracing
References are available on request
Page 2