Worldwide sea water desalination has been a very effective and economical way of producing potable water for drinking and industries. It is a myth that, sea water desalination is exorbitantly expensive. But the fact that it is affordable.
The document describes several solar-powered reverse osmosis desalination systems produced by Vertence Technologies for producing fresh drinking water. The systems, trademarked MiD, MeD, and MaxD, are suitable for small islands, ships, and emergencies and can produce between 1-50 tons of fresh water per day. The systems use reverse osmosis powered by photovoltaic solar panels to remove over 90% of salts and microorganisms from brackish or seawater in a low energy and economical process.
On a searing summer day, a swimming pool is a welcome respite from the heat. But before you can dive into its cool blue water, you have to perform all the maintenance drudgery that prolongs its crystal-clear perfection.
Spray cooling uses atomized liquid droplets to efficiently cool electronics through conduction and evaporation on impact. Studying individual droplet behavior on impact can provide insight into spray cooling dynamics and opportunities for innovation. The document describes experiments to better understand multiple droplet impacts by developing mechanisms to generate consecutive, similarly sized water droplets. Methods tested include single and dual valves, pre-separation in a tube, a droplet chopper, and a piezoelectric droplet generator. Future work involves estimating optimal frequencies for multiple droplet studies and producing repeatable, consistently sized successive droplets to analyze fluid behavior after impact.
Thermal modelling of solar still and different desalinationShantam Warkad
Thermal modelling of solar still can be done manually using a model or can be don on comparative basis using different software and compilers like ANSYS, C, MATLAB and different desalination
The document discusses evaporation and the factors that affect the rate of evaporation, including temperature, surface area, humidity, and air movement. It explains that evaporation is a cooling process where fast-moving liquid particles escape at the surface and enter the vapor phase, lowering the temperature of the remaining liquid. Condensation is described as the opposite process of evaporation. Examples are provided to illustrate how to calculate the energy required for evaporation and the increase in body temperature if that energy was not removed through sweating during exercise.
Welcome to Care-Free Water Conditioners, the market leader in natural water treatment for your Home, Farm or Industry. Our proven technology has made life easier for over 100,000 people by getting rid of their hard water problems and improving their water quality. Our water solutions can do the same for you. After 30 years, Care-Free is still unequalled in performance, price and guarantee.
The document discusses water resources and desalination needs in GCC countries. It notes that while GCC countries have oil wealth, they lack fresh water. Only 1% of global water is fresh, and GCC countries rely on desalination for two-thirds of their supply. However, desalination is energy intensive and expensive. Rapid population growth in GCC countries is increasing water demand significantly at the same time that per capita freshwater availability is projected to decline by half by 2030 due to limited renewable resources and population increases. The document examines water usage and conservation needs in GCC countries to develop sustainable water resources for the future.
Desalination: The future of Water Security in Saudi ArabiaSarbartho Mukherjee
Saudi Arabia faces severe water scarcity due to limited surface water and irregular rainfall, but demand is growing rapidly due to population growth, industrialization, and tourism. To address this, Saudi Arabia has greatly expanded desalination capacity, led by reverse osmosis plants. However, rising costs and environmental impacts require a shift to more sustainable technologies like solar and nuclear powered desalination. If Saudi Arabia continues to invest in private sector partnerships and new technologies, the desalination industry has strong potential for high profits and meeting the country's critical water needs.
The document describes several solar-powered reverse osmosis desalination systems produced by Vertence Technologies for producing fresh drinking water. The systems, trademarked MiD, MeD, and MaxD, are suitable for small islands, ships, and emergencies and can produce between 1-50 tons of fresh water per day. The systems use reverse osmosis powered by photovoltaic solar panels to remove over 90% of salts and microorganisms from brackish or seawater in a low energy and economical process.
On a searing summer day, a swimming pool is a welcome respite from the heat. But before you can dive into its cool blue water, you have to perform all the maintenance drudgery that prolongs its crystal-clear perfection.
Spray cooling uses atomized liquid droplets to efficiently cool electronics through conduction and evaporation on impact. Studying individual droplet behavior on impact can provide insight into spray cooling dynamics and opportunities for innovation. The document describes experiments to better understand multiple droplet impacts by developing mechanisms to generate consecutive, similarly sized water droplets. Methods tested include single and dual valves, pre-separation in a tube, a droplet chopper, and a piezoelectric droplet generator. Future work involves estimating optimal frequencies for multiple droplet studies and producing repeatable, consistently sized successive droplets to analyze fluid behavior after impact.
Thermal modelling of solar still and different desalinationShantam Warkad
Thermal modelling of solar still can be done manually using a model or can be don on comparative basis using different software and compilers like ANSYS, C, MATLAB and different desalination
The document discusses evaporation and the factors that affect the rate of evaporation, including temperature, surface area, humidity, and air movement. It explains that evaporation is a cooling process where fast-moving liquid particles escape at the surface and enter the vapor phase, lowering the temperature of the remaining liquid. Condensation is described as the opposite process of evaporation. Examples are provided to illustrate how to calculate the energy required for evaporation and the increase in body temperature if that energy was not removed through sweating during exercise.
Welcome to Care-Free Water Conditioners, the market leader in natural water treatment for your Home, Farm or Industry. Our proven technology has made life easier for over 100,000 people by getting rid of their hard water problems and improving their water quality. Our water solutions can do the same for you. After 30 years, Care-Free is still unequalled in performance, price and guarantee.
The document discusses water resources and desalination needs in GCC countries. It notes that while GCC countries have oil wealth, they lack fresh water. Only 1% of global water is fresh, and GCC countries rely on desalination for two-thirds of their supply. However, desalination is energy intensive and expensive. Rapid population growth in GCC countries is increasing water demand significantly at the same time that per capita freshwater availability is projected to decline by half by 2030 due to limited renewable resources and population increases. The document examines water usage and conservation needs in GCC countries to develop sustainable water resources for the future.
Desalination: The future of Water Security in Saudi ArabiaSarbartho Mukherjee
Saudi Arabia faces severe water scarcity due to limited surface water and irregular rainfall, but demand is growing rapidly due to population growth, industrialization, and tourism. To address this, Saudi Arabia has greatly expanded desalination capacity, led by reverse osmosis plants. However, rising costs and environmental impacts require a shift to more sustainable technologies like solar and nuclear powered desalination. If Saudi Arabia continues to invest in private sector partnerships and new technologies, the desalination industry has strong potential for high profits and meeting the country's critical water needs.
Desalination- Purification of saline waterZuhha Taqdees
This document discusses desalination as a way to provide fresh water as Earth's fresh water supply dwindles. It outlines several procedures for desalination including multi-stage flash distillation, reverse osmosis, and electrodialysis. The largest desalination plant is located in Saudi Arabia and produces 150 million cubic meters of fresh water per year at a cost of $1.06 billion. While desalination ensures a source of clean water, it is an expensive process that requires a significant amount of energy.
The document discusses various methods for desalination of water, including distillation, freezing, and reverse osmosis. It provides details on solar distillation, including that it is inexpensive but produces low volumes of water. It also notes that desalination by distillation produces water without chemical salts and is effective at removing various impurities. The document compares passive and active solar distillation, and discusses different designs of solar stills as well as methods for increasing their productivity and efficiency. It also provides an overview of desalination by freezing, including direct and indirect freezing processes.
Desalination can be defined as any process that removes salts from water. Desalination processes may be used in municipal, industrial, or commercial applications. With improvements in technology. Today there are two main types of desalination technologies – membrane (RO) and thermal (MED, MVC and MSF) desalination.
This document discusses various technologies for treating unconventional oil and gas wastewater, specifically flowback and produced water. It outlines six main categories of water treatment - bulk filtration, lime softening, sulfate addition, nanofiltration, reverse osmosis, and thermal technologies. For each category, it explains what contaminants the treatment removes. The document also discusses challenges with reverse osmosis including high reject rates as salt concentrations increase. It provides an overview of other desalination technologies like membrane distillation, electrodialysis, and various thermal processes. In summary, while many technologies are used conventionally, few have proven effective for treating oil and gas wastewater at scale, with limited cost and performance data from field applications
This document discusses various methods for concentrating liquids in food processing, including evaporation, membrane separation, and freeze concentration. Evaporation involves boiling off water and is commonly used for fruit juices, tomatoes, and dairy. Membrane separation uses semipermeable membranes to separate water from other molecules based on size. Reverse osmosis and ultrafiltration are described. Freeze concentration partially freezes a product to form ice crystals that are then separated, leaving a concentrated liquid. The techniques each have advantages and limitations for different food applications.
This document discusses solar desalination technologies. It begins by introducing conventional desalination methods like multi-stage flash distillation and reverse osmosis that are energy intensive. It then explains that solar desalination can help address future challenges of energy and water shortage. Solar desalination techniques include direct methods like solar stills and indirect methods that combine solar energy with conventional distillation. Both direct and indirect solar collection systems are discussed along with technologies like humidification-dehumidification that improve thermal efficiency. In conclusion, solar desalination offers a promising way to meet power and water needs in remote regions by providing alternatives to fossil fuel-driven processes.
This document outlines and compares three common methods for desalination of seawater: multiple effect distillation (MED), multi-stage flash distillation (MSF), and reverse osmosis (RO). MED uses a series of distillation columns to purify water through evaporation and condensation. MSF uses a succession of chambers where portions of heated seawater flash into vapor due to pressure changes. RO uses pressure to force seawater through a permeable membrane to separate freshwater. The document discusses the process, advantages, and outputs of each method. MED is highlighted as being very power efficient compared to MSF and RO, with the capacity to produce 68,000 m3 of freshwater per day.
Fresh water generator, one of the important machinery on board a ship, is something that cannot be done without. Fresh water produced from fresh water generator is used for drinking, cooking, washing and even running other important machinery which use fresh water as a cooling medium.
Thermal desalination involves evaporating saline water using heat to produce distilled water. There are three main types: multi-effect distillation uses steam from one effect to heat the next in a series, multi-stage flash distillation flashes hot saline water into lower pressure stages to evaporate it, and thermal vapor compression uses a compressor to pressurize evaporated vapor and transfer heat to more saline water. Thermal desalination provides reliable fresh water but uses significant energy and produces brine requiring disposal. Ongoing research focuses on improving efficiency and sustainability through renewable energy integration and innovative brine management.
This document provides information about power plant cooling water systems. It discusses the types of cooling water systems, including once-through and recirculating systems. It describes the components of cooling water systems, such as cooling towers and how they function using evaporation to cool water. It also discusses problems that can occur in cooling water systems, such as scale formation and corrosion, and methods to control these issues. The document is written by Umar Farooq, a chemist, and provides technical details on cooling water chemistry.
Falling film evaporators are commonly used in the sugar industry to evaporate water from sugar cane juice. Multiple effect evaporators use steam sequentially across several effects to efficiently concentrate the juice through evaporation. In each subsequent effect, steam from the previous effect is used to heat and evaporate more water from the thickening juice, with vacuum applied to lower the boiling point. This allows for high evaporation rates with low energy use.
The document discusses desalting, which is the removal of salts from crude oil. It describes the purpose and types of desalters, which are equipment used to remove salts, sediments, and metals from crude. The main types are natural desalters, chemical desalters, and electrochemical desalters. Electrochemical desalters use chemicals and an electric field to break emulsions and cause salt droplets to coalesce and settle. Key parameters that affect desalting include temperature, electric field strength, pressure across the mixing valve, water level, and flow velocity. Maintaining proper operating conditions is important for effective desalting.
Distillation is a method to separate mixtures based on differences in volatility. It involves boiling the mixture and condensing the vapor produced. Simple distillation produces an impure distillate while fractional distillation uses a fractionating column for multiple vaporization-condensation cycles, allowing better separation. Vacuum distillation uses reduced pressure for distillation at lower temperatures to prevent degradation. Batch distillation processes mixtures in batches while continuous distillation constantly feeds and removes fractions.
This document provides an overview of desalination including an introduction, various desalination methods, preferred technologies, and the state of reverse osmosis technology. It introduces desalination as a process to remove salt and minerals from water to make it suitable for consumption. The main methods discussed are thermal (MSF, MED, VC) and membrane based (RO, ED, EDR), with MSF and RO identified as preferred technologies. The document then goes into detail on the reverse osmosis process, including pre-treatment, post-treatment, cleaning processes, and energy recovery methods.
Evaporation involves boiling a liquid food to remove water vapor, increasing its solids content and preserving it. It differs from dehydration which produces a solid product and distillation which separates vapor fractions. A common example is concentrating tomato juice to 35-37% solids for paste. Evaporation reduces costs, improves food stability and appearance, and acts as a pre-treatment for other preservation methods. Various evaporator types are used depending on factors like heat transfer rate and food properties.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Desalination- Purification of saline waterZuhha Taqdees
This document discusses desalination as a way to provide fresh water as Earth's fresh water supply dwindles. It outlines several procedures for desalination including multi-stage flash distillation, reverse osmosis, and electrodialysis. The largest desalination plant is located in Saudi Arabia and produces 150 million cubic meters of fresh water per year at a cost of $1.06 billion. While desalination ensures a source of clean water, it is an expensive process that requires a significant amount of energy.
The document discusses various methods for desalination of water, including distillation, freezing, and reverse osmosis. It provides details on solar distillation, including that it is inexpensive but produces low volumes of water. It also notes that desalination by distillation produces water without chemical salts and is effective at removing various impurities. The document compares passive and active solar distillation, and discusses different designs of solar stills as well as methods for increasing their productivity and efficiency. It also provides an overview of desalination by freezing, including direct and indirect freezing processes.
Desalination can be defined as any process that removes salts from water. Desalination processes may be used in municipal, industrial, or commercial applications. With improvements in technology. Today there are two main types of desalination technologies – membrane (RO) and thermal (MED, MVC and MSF) desalination.
This document discusses various technologies for treating unconventional oil and gas wastewater, specifically flowback and produced water. It outlines six main categories of water treatment - bulk filtration, lime softening, sulfate addition, nanofiltration, reverse osmosis, and thermal technologies. For each category, it explains what contaminants the treatment removes. The document also discusses challenges with reverse osmosis including high reject rates as salt concentrations increase. It provides an overview of other desalination technologies like membrane distillation, electrodialysis, and various thermal processes. In summary, while many technologies are used conventionally, few have proven effective for treating oil and gas wastewater at scale, with limited cost and performance data from field applications
This document discusses various methods for concentrating liquids in food processing, including evaporation, membrane separation, and freeze concentration. Evaporation involves boiling off water and is commonly used for fruit juices, tomatoes, and dairy. Membrane separation uses semipermeable membranes to separate water from other molecules based on size. Reverse osmosis and ultrafiltration are described. Freeze concentration partially freezes a product to form ice crystals that are then separated, leaving a concentrated liquid. The techniques each have advantages and limitations for different food applications.
This document discusses solar desalination technologies. It begins by introducing conventional desalination methods like multi-stage flash distillation and reverse osmosis that are energy intensive. It then explains that solar desalination can help address future challenges of energy and water shortage. Solar desalination techniques include direct methods like solar stills and indirect methods that combine solar energy with conventional distillation. Both direct and indirect solar collection systems are discussed along with technologies like humidification-dehumidification that improve thermal efficiency. In conclusion, solar desalination offers a promising way to meet power and water needs in remote regions by providing alternatives to fossil fuel-driven processes.
This document outlines and compares three common methods for desalination of seawater: multiple effect distillation (MED), multi-stage flash distillation (MSF), and reverse osmosis (RO). MED uses a series of distillation columns to purify water through evaporation and condensation. MSF uses a succession of chambers where portions of heated seawater flash into vapor due to pressure changes. RO uses pressure to force seawater through a permeable membrane to separate freshwater. The document discusses the process, advantages, and outputs of each method. MED is highlighted as being very power efficient compared to MSF and RO, with the capacity to produce 68,000 m3 of freshwater per day.
Fresh water generator, one of the important machinery on board a ship, is something that cannot be done without. Fresh water produced from fresh water generator is used for drinking, cooking, washing and even running other important machinery which use fresh water as a cooling medium.
Thermal desalination involves evaporating saline water using heat to produce distilled water. There are three main types: multi-effect distillation uses steam from one effect to heat the next in a series, multi-stage flash distillation flashes hot saline water into lower pressure stages to evaporate it, and thermal vapor compression uses a compressor to pressurize evaporated vapor and transfer heat to more saline water. Thermal desalination provides reliable fresh water but uses significant energy and produces brine requiring disposal. Ongoing research focuses on improving efficiency and sustainability through renewable energy integration and innovative brine management.
This document provides information about power plant cooling water systems. It discusses the types of cooling water systems, including once-through and recirculating systems. It describes the components of cooling water systems, such as cooling towers and how they function using evaporation to cool water. It also discusses problems that can occur in cooling water systems, such as scale formation and corrosion, and methods to control these issues. The document is written by Umar Farooq, a chemist, and provides technical details on cooling water chemistry.
Falling film evaporators are commonly used in the sugar industry to evaporate water from sugar cane juice. Multiple effect evaporators use steam sequentially across several effects to efficiently concentrate the juice through evaporation. In each subsequent effect, steam from the previous effect is used to heat and evaporate more water from the thickening juice, with vacuum applied to lower the boiling point. This allows for high evaporation rates with low energy use.
The document discusses desalting, which is the removal of salts from crude oil. It describes the purpose and types of desalters, which are equipment used to remove salts, sediments, and metals from crude. The main types are natural desalters, chemical desalters, and electrochemical desalters. Electrochemical desalters use chemicals and an electric field to break emulsions and cause salt droplets to coalesce and settle. Key parameters that affect desalting include temperature, electric field strength, pressure across the mixing valve, water level, and flow velocity. Maintaining proper operating conditions is important for effective desalting.
Distillation is a method to separate mixtures based on differences in volatility. It involves boiling the mixture and condensing the vapor produced. Simple distillation produces an impure distillate while fractional distillation uses a fractionating column for multiple vaporization-condensation cycles, allowing better separation. Vacuum distillation uses reduced pressure for distillation at lower temperatures to prevent degradation. Batch distillation processes mixtures in batches while continuous distillation constantly feeds and removes fractions.
This document provides an overview of desalination including an introduction, various desalination methods, preferred technologies, and the state of reverse osmosis technology. It introduces desalination as a process to remove salt and minerals from water to make it suitable for consumption. The main methods discussed are thermal (MSF, MED, VC) and membrane based (RO, ED, EDR), with MSF and RO identified as preferred technologies. The document then goes into detail on the reverse osmosis process, including pre-treatment, post-treatment, cleaning processes, and energy recovery methods.
Evaporation involves boiling a liquid food to remove water vapor, increasing its solids content and preserving it. It differs from dehydration which produces a solid product and distillation which separates vapor fractions. A common example is concentrating tomato juice to 35-37% solids for paste. Evaporation reduces costs, improves food stability and appearance, and acts as a pre-treatment for other preservation methods. Various evaporator types are used depending on factors like heat transfer rate and food properties.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Easily Verify Compliance and Security with Binance KYCAny kyc Account
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...Aleksey Savkin
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Desalinationcanadianclear
1.
2.
3. Introduction
Many regions in the world do not have easy access to
fresh drinking water
Desalination process helps remove salts from sea
water to make it drinkable
Pros: Brings drinking water to many dry regions
Cons: Expensive
In some parts of Middle East, a liter of water is more
expensive than a liter of gasoline
5. Reverse Osmosis
Water pressure increased
Pumped through permeable membranes
Salts separated from water due to membranes
Most desalination plants utilize this technology
6. Multi Stage flash
Steam is used to heat tubes of saline water
Heated water flows into “stages” that are at lower
pressure
Water boils rapidly and “flashes” into steam
7. Generally, only a small amount converts to steam
since rapid vaporization results in cooling of water
Thus water is flashed multiple times in different
stages at lower pressures, requiring no extra heat
But, multi stage flashing reduces thermal efficiency
85% of world’s desalinated water is generated
through MSF
Recently the equipment has become cheaper
Multi Stage flash (cont…)
8. Shoaiba Desalination Plant
Largest desalination plant in the world
Produces 450,000 m³/day
Per year
150 million m³ of water is
desalinated
Total cost is $1.06 billion
To increase the thermal efficiency of this plant, the
maximum number of stages is set to 25 (MSF)
Research in the field is resulting in more plants
coming up in Florida and California
9. Shivsu canadian clear
For more detail contact us.,
No.149, Poonamallee High Road, (E.V.R Lane) Kilpauk,
Chennai-600 010,
India. 1-800-425-20000 +91-44-28362461 - 71 +91-44-28362470
Mail Id:
http://www.canadianclear.com/
support@canadianclear.com
info@canadianclear.com
10. Shivsu canadian clear
For more detail contact us.,
No.149, Poonamallee High Road, (E.V.R Lane) Kilpauk,
Chennai-600 010,
India. 1-800-425-20000 +91-44-28362461 - 71 +91-44-28362470
Mail Id:
http://www.canadianclear.com/
support@canadianclear.com
info@canadianclear.com