The new PMT series of panel mount power supplies is the latest offering from one of the world's largest power supply manufacturers and solution providers.
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite Tripp Lite
Tripp Lite's high-density fiber cassette solutions offer scalability through the modular design, giving you the ability to modify, upgrade or expand the fiber infrastructure by simply adding or swapping cassettes.
For more information, visit: http://www2.tripplite.com/malp/fiber-cassette-solutions
AOA industrial fiber media converters provide Ethernet to fiber solutions which be designed to work in harsh environments of temperature extremes, humidity, and vibration that exceed the ranges
For more details on our products and services, please feel free to visit us at Fiber Optic Patch Cable, Cat6 Patch Cables, Fiber Media Converters, QSFP+ Transceiver, SFP+ Transceiver
For more details :- http://cablexa.com/
Delta Electronics adds two Redundancy Modules, DRR-20A and DRR-40A to its
CliQ II series of DIN Rail power management products. They are compatible with
both 24Vdc and 48Vdc power supplies, offering redundancy functionality. These
modules can also be used for Parallel operation.
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's
ABB TTR 4x MV Medium Voltage MV Current Transformers CT's
3.3kV/3.6kV - 11kV/12kV Medium Voltage MV Bushing Current Transformers
ABB Power Products
ABB TTR6x medium voltage current transformers are cast in epoxy resin for MV insulation up to 25kV - ABB TTR6x medium voltage transformers are configured as bar-type, with either one or more transformer ratios (possibility to change over the meddium voltage MV secondary side) and perform the function of a bushing when installed on the switchboard.
The ABB TTR6x indoor bushing current transformer is designed with either 1 or 2 secondary transformer windings and depending on the combinagtion of parameters (accuracy class, burden, short circuit current, overcurrent factor) with the possibility to choose from various sizes of the medium voltage transformer.
The secondary MV transformer windings are used for measurement or protection purposes - one transformer terminal of each secondary transformer winding in use and one terminal of short-circuited and not used medium voltage winding have to be earthed during the transformer operation. The seoondary windings are lead out into a cast-type secondary terminal board, covered with plastic cover which may be sealed. The ABB transformer can be mounted in any position for efficient and reliable MV medium voltage performance. The ABB transformer is fixed by using four screws.
ABB TTR 4x Current Transformers CT
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's - ABB TTR Features
Transformer rated primary medium voltages : 17.5kV to 25kV
Transformer rated current : 100, 150, 200, 300, 400, 500, 600, 750, 1000, 1250, 1500, 2000 and 2500Amps
Transformer rated frequency : 50 Hz ; 60 Hz (Herz)
ABB indoor bushing current transformers for MV medium voltage service are conformant to following specifications : IEC, VDE, ANSI, BS, GOST and CSN.
FIBER-MART based in Hong Kong & U.S., a worldwide leading supplier in a fiber-optic network, FTTx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.
Based on our decades of operations in Indian low voltage switchgear applications it is apparent that Indian industrial conditions are extremely harsh and demanding in nature. We understand the significance and need for a device which seamlessly, effortlessly and reliably delivers the best performance in varied applications.
Interconnect 10, 40 and 100/120Gb Networks with Tripp Lite Tripp Lite
Tripp Lite's high-density fiber cassette solutions offer scalability through the modular design, giving you the ability to modify, upgrade or expand the fiber infrastructure by simply adding or swapping cassettes.
For more information, visit: http://www2.tripplite.com/malp/fiber-cassette-solutions
AOA industrial fiber media converters provide Ethernet to fiber solutions which be designed to work in harsh environments of temperature extremes, humidity, and vibration that exceed the ranges
For more details on our products and services, please feel free to visit us at Fiber Optic Patch Cable, Cat6 Patch Cables, Fiber Media Converters, QSFP+ Transceiver, SFP+ Transceiver
For more details :- http://cablexa.com/
Delta Electronics adds two Redundancy Modules, DRR-20A and DRR-40A to its
CliQ II series of DIN Rail power management products. They are compatible with
both 24Vdc and 48Vdc power supplies, offering redundancy functionality. These
modules can also be used for Parallel operation.
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's
ABB TTR 4x MV Medium Voltage MV Current Transformers CT's
3.3kV/3.6kV - 11kV/12kV Medium Voltage MV Bushing Current Transformers
ABB Power Products
ABB TTR6x medium voltage current transformers are cast in epoxy resin for MV insulation up to 25kV - ABB TTR6x medium voltage transformers are configured as bar-type, with either one or more transformer ratios (possibility to change over the meddium voltage MV secondary side) and perform the function of a bushing when installed on the switchboard.
The ABB TTR6x indoor bushing current transformer is designed with either 1 or 2 secondary transformer windings and depending on the combinagtion of parameters (accuracy class, burden, short circuit current, overcurrent factor) with the possibility to choose from various sizes of the medium voltage transformer.
The secondary MV transformer windings are used for measurement or protection purposes - one transformer terminal of each secondary transformer winding in use and one terminal of short-circuited and not used medium voltage winding have to be earthed during the transformer operation. The seoondary windings are lead out into a cast-type secondary terminal board, covered with plastic cover which may be sealed. The ABB transformer can be mounted in any position for efficient and reliable MV medium voltage performance. The ABB transformer is fixed by using four screws.
ABB TTR 4x Current Transformers CT
ABB Medium Voltage MV Indoor Bushing Current Transformers CT's - ABB TTR Features
Transformer rated primary medium voltages : 17.5kV to 25kV
Transformer rated current : 100, 150, 200, 300, 400, 500, 600, 750, 1000, 1250, 1500, 2000 and 2500Amps
Transformer rated frequency : 50 Hz ; 60 Hz (Herz)
ABB indoor bushing current transformers for MV medium voltage service are conformant to following specifications : IEC, VDE, ANSI, BS, GOST and CSN.
FIBER-MART based in Hong Kong & U.S., a worldwide leading supplier in a fiber-optic network, FTTx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing & integrated network solutions. Devoting on the research & development, design, manufacture, and fiber connectivity network solutions for carriers, ISPs, content providers and networks, has always engaged in high-performance and innovation.
Based on our decades of operations in Indian low voltage switchgear applications it is apparent that Indian industrial conditions are extremely harsh and demanding in nature. We understand the significance and need for a device which seamlessly, effortlessly and reliably delivers the best performance in varied applications.
Polyduct cable protection duct is manufactured in MDPE or HDPE and is a class 3 product which is available in both straight lengths and coils. Polyduct can be used for either open trench or trenchless applications.
Key benefits - Polypipe Cable Ducting - Polyduct Power
High impact cable duct for underground cable protection
Ease of use and transportation
Flexibility of coiled duct eliminating the need for special bends
Exceptional durability for direct burial cable ducting
Can be used for trenchless applications
Meets ENATS requirements for underground cable protection
power relays, a compact and small in size with high dielectric strength of 2000V. Designed applying Maximum function minimum space principles. 22 series are suitable for both 50Hz & 60Hz. Available with a contact capacity of 10 Amps. All fixed contacts powered by WERNER AFT (Anti-Fuse-Technology)
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Atomic Layer Deposition solutions for SiC Power ElectronicsBeneq
Power Electronics International
Brussels, Belgium
19.04.2023
Atomic Layer Deposition solutions for SiC Power Electronics
Integrated ALD passivation/gate dielectric stack for SiC MOSFET
Presented by Mikko Söderlund from Beneq Oy
Automotive Infotainment systems demand more from their components. Getting high performance parts found in smartphones with the quality expected of the automotive industry is a challenge.
KEMET's latest technology breakthrough with Low Voltage DC T591 Polymer Capacitors enables them to pass lifetime requirements targeted for Automotive applications.
Additionally there is a roadmap to getting to full AEC-Q200 qualifications with this same technology block.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 675LR Connector
1250A 11kV Dead Break Connectors 35-800sqmm
Nexans Euromold 675LR connector suits 11kV/12kV polymeric insulated cables (XLPE EPR), rated up to 1250amps with copper or aluminium conductors 35-800sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 1250amp (copper stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" copper, 600 series bushings.
Nexans Euromold Connectors Interface D 600 Series
Nexans Euromold 650LR Connector
800A 11kV Dead Break Connectors 35-630sqmm
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold K650LR connector suits 24kV polymeric insulated cables (XLPE EPR), rated up to 800amps with copper or aluminium conductors 35-630sqmm.
Interface type D Nexans Euromold 5/8" bolted tee connector, for high voltage cable connecting and termination applications up to 24kV. 800amp (aluminium stud) application separable Nexans Euromold connector is designed to connect polymeric (XLPE EPR) cables to a 5/8" aluminium stud, 600 series bushings.
Nexans Euromold 600 series screened separable connectors are EPDM pre-moulded, high voltage cable terminations for 6.6kV, 11kV, 15kV and 24kV electrical equipment including switchgear, transformers and motors.
Nexans Euromold 600 series separable connectors include Nexans Euromold bolted tee connectors and Nexans Euromold bushings (oil and air insulated) for electrical equipment up to 24kV - 1250A. Nexans Euromold 600 series connectors are specified to terminate and connect polymeric (XLPE or EPR) screened (copper tape and wire) cables to ANSI-style Interface Type D (800amp) bushings with either copper or aluminium 5/8" bolted connection.
Similar to New Product : PMT Panel Mount Power Supply Series (20)
Pollution Degree (PD) is an important classification for the clearance & creepage distances of electrical insulation, such as distance between components, PCB traces and power supply enclosure.
Parallel or Series? In general, when selecting a power supply, it is important to choose one with appropriate voltage and current rating to support the system requirements. Typically, power supplies are connected in parallel to increase the power/current rating and also to increase the system reliability by providing redundancy function. Series connection of power supplies can cater to special needs of the system when requiring higher output voltages.
Power disruption and shutdown can be very annoying and may even be costly at times. There are various methods to maintain zero down time for a system like adding backup powers by using generators or adding Uninterruptible Power Supply (UPS). Click to view more.
Delta Electronics has added a new DRC-12V100W1AZ model to the Chrome DIN rail power supply series with 12V/6A output. The compact Class II double isolation power supply is designed for use in small cabinets.
The CliQ M series has the highest power density among the CliQ family and also the first series in the CliQ family to feature Advanced Power Boost (APB).
Delta Electronics is extending the 24V Lyte DIN rail power supply series with power rating of 240W and 480W, namely, DRL-24V240W1A☐ and DRL-24V480W1A☐. Despite the competitive price for the Lyte series of products, the series more than fulfill the essential needs in many general industrial applications without compromising on reliability and performance.
Delta Electronics is introducing the new DRS-30W series to the ultra compact Sync DIN rail power supply series. The new models of 24V/1.25A output (DRS-24V30W1NZ) and 5V/3A output (DRS-5V30W1NZ) are competitively priced and have improved performance at low temperatures (-20°C @ 80% load).
Delta Electronics extends the CliQ II DIN rail power supply series with 24V/10A output. The DRP-24V240W2BN features wide AC input voltage for single or two phase range.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!