Datasheet EnGenius EGS2110P
•
0 likes•172 views
The document is a datasheet for the EGS2110P switch made by EnGenius Europe. It has 8 Gigabit Ethernet ports that support Power over Ethernet (PoE) along with 2 SFP slots. It can provide up to 61.6 watts of PoE power budget to connected devices like IP phones, cameras and wireless access points. The switch also supports management features including quality of service, voice VLANs, IGMP snooping, VLANs, and port-based controls.
Report
Share
Report
Share
Download to read offline
Recommended
Datasheet EnGenius EGS5110P
The document describes the EnGenius EGS5110P switch. It has 8 Gigabit ports that support IEEE802.3at/af Power over Ethernet (PoE), providing up to 30W per port and a total PoE budget of 130W. It also has 2 small form-factor pluggable (SFP) slots. The switch is designed for small to medium sized businesses needing to connect and power IP phones, cameras, and wireless access points throughout their facilities. It includes features such as quality of service, voice VLAN, port trunking, VLAN, and storm control.
Datasheet EnGenius EGS2108P
The document provides details about the EGS2108P switch from EnGenius Europe, including its key features. It is an 8-port Gigabit Ethernet switch that provides Power over Ethernet (PoE) on ports 1-4, allowing it to connect and power devices like IP phones and wireless access points. It offers management functions like QoS, voice VLANs, and IGMP snooping. The switch provides Gigabit connectivity and PoE power for small businesses needing to connect and power devices on their network.
Datasheet EnGenius ECB300
The document provides information on the EnGenius ECB300 wireless access point/client bridge. It lists the key features and specifications of the ECB300 including that it operates in the 2.4GHz frequency band, has a data rate up to 300Mbps, includes two external 5dBi antennas, has various operation modes, supports WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS. It also provides details on the hardware, interfaces, power requirements, and packaging contents of the ECB300.
Datasheet EnGenius ENH1750EXT
The document provides information on the ENH1750EXT outdoor wireless access point, including its key features, specifications, and compliance. The ENH1750EXT has dual-band 802.11ac and 802.11n wireless with speeds up to 1300Mbps, supports PoE, has two Gigabit Ethernet ports, and has an IP68-rated waterproof housing designed for harsh outdoor environments. It provides flexibility through its ability to configure each radio into different modes and supports various security and authentication standards to enforce security.
Datasheet ENS1200
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
EnGenius Europe Datasheet ECB1750
Datasheet of the EnGenius ECB1750 - 802.11ac/a/b/g/n dual radio concurrent Access Point/Client Bridge/WDS
Datasheet EWS510AP
The EnGenius EWS510AP is a dual-band wireless access point and 4-port switch that is designed to be installed in wall plates for providing wireless and wired connectivity in hotel rooms, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and has internal antennas. It can operate as a standalone access point or be centrally managed as part of a larger wireless network. The device has one uplink port, three downstream ports, and a Power over Ethernet port to power devices like phones.
Datasheet EnGenius EnStation5
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
Recommended
Datasheet EnGenius EGS5110P
The document describes the EnGenius EGS5110P switch. It has 8 Gigabit ports that support IEEE802.3at/af Power over Ethernet (PoE), providing up to 30W per port and a total PoE budget of 130W. It also has 2 small form-factor pluggable (SFP) slots. The switch is designed for small to medium sized businesses needing to connect and power IP phones, cameras, and wireless access points throughout their facilities. It includes features such as quality of service, voice VLAN, port trunking, VLAN, and storm control.
Datasheet EnGenius EGS2108P
The document provides details about the EGS2108P switch from EnGenius Europe, including its key features. It is an 8-port Gigabit Ethernet switch that provides Power over Ethernet (PoE) on ports 1-4, allowing it to connect and power devices like IP phones and wireless access points. It offers management functions like QoS, voice VLANs, and IGMP snooping. The switch provides Gigabit connectivity and PoE power for small businesses needing to connect and power devices on their network.
Datasheet EnGenius ECB300
The document provides information on the EnGenius ECB300 wireless access point/client bridge. It lists the key features and specifications of the ECB300 including that it operates in the 2.4GHz frequency band, has a data rate up to 300Mbps, includes two external 5dBi antennas, has various operation modes, supports WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS. It also provides details on the hardware, interfaces, power requirements, and packaging contents of the ECB300.
Datasheet EnGenius ENH1750EXT
The document provides information on the ENH1750EXT outdoor wireless access point, including its key features, specifications, and compliance. The ENH1750EXT has dual-band 802.11ac and 802.11n wireless with speeds up to 1300Mbps, supports PoE, has two Gigabit Ethernet ports, and has an IP68-rated waterproof housing designed for harsh outdoor environments. It provides flexibility through its ability to configure each radio into different modes and supports various security and authentication standards to enforce security.
Datasheet ENS1200
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
EnGenius Europe Datasheet ECB1750
Datasheet of the EnGenius ECB1750 - 802.11ac/a/b/g/n dual radio concurrent Access Point/Client Bridge/WDS
Datasheet EWS510AP
The EnGenius EWS510AP is a dual-band wireless access point and 4-port switch that is designed to be installed in wall plates for providing wireless and wired connectivity in hotel rooms, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and has internal antennas. It can operate as a standalone access point or be centrally managed as part of a larger wireless network. The device has one uplink port, three downstream ports, and a Power over Ethernet port to power devices like phones.
Datasheet EnGenius EnStation5
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
Quick Installation Guide EnStationAC English
This document provides instructions for installing and setting up the EnStationAC device. It includes a list of package contents and minimum requirements. It then provides step-by-step instructions for connecting the EnStationAC device, setting up the computer network configuration, accessing the EnStationAC's web interface, and selecting an operating mode. It also includes instructions for wall mounting or pole mounting the EnStationAC unit.
Product Catalogue 2015 EnGenius Europe
The document is a product catalogue from EnGenius that includes:
- An index listing various product series such as outdoor business solutions, indoor business solutions, PoE switches, and digital cordless phones.
- Information about EnGenius and their expertise in long range wireless solutions.
- Descriptions and specifications for several product series, including custom series for unique deployments, outdoor access points, indoor access points, and PoE switches.
- An example use case of EnGenius wireless products providing a reliable network for a music festival organization.
Datasheet EAP1200H
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
Sales presentation EnStation2 - EnStation 5
The document provides information about EnStation2 and EnStation5 wireless outdoor CPE products, including key specifications, features, selling points, and target markets. The EnStation series features high gain directional antennas, high output power, long transmission ranges up to 10km, various operation modes, and management via EZ Controller software. They are suited for applications requiring long range point-to-point wireless links such as internet access, surveillance cameras, and industrial IoT devices.
Quick Installation Guide EWS300AP English
This document provides instructions for quickly installing an EnGenius EWS300AP managed indoor access point. It lists the package contents and minimum requirements. The steps explain how to connect the access point to a computer via an EnGenius wireless management switch in order to obtain an IP address for configuration. It also provides instructions for mounting the access point to a wall or ceiling using either a mounting bracket or T-rail connectors.
Datasheet EnGenius EnStation2
The EnStation2 is an outdoor wireless device from EnGenius Europe that provides wireless connectivity of up to 300Mbps. It has a high gain directional antenna, supports four operation modes, and can be managed through EZ Controller software. The EnStation2 offers security features like WEP, WPA, WPA2 encryption as well as authentication protocols to enforce security.
Quick Installation Guide EWS350AP English
This document provides installation instructions for the EnGenius EWS350AP managed indoor access point. It describes how to connect the access point to a computer or EnGenius wireless management switch to configure it. It also explains how to mount the access point to a wall or ceiling using the included mounting bracket or T-rail connectors. Setup steps include configuring the computer's IP address, logging into the access point's web interface using the default credentials, and selecting the access point operation mode.
Datasheet EnGenius EGS7228P
The document describes the EnGenius EGS7228P 24-port Gigabit Ethernet switch. It has 24 ports that support 802.3at/af Power over Ethernet (PoE), 4 SFP slots, a 185W PoE budget, and Layer 2 management features. It is designed to support wireless access points and IP surveillance applications for small and medium businesses.
Datasheet EWS300AP
The document describes the EnGenius Neutron EWS300AP wireless access point. It is an affordable single-band 802.11n access point that can operate as a standalone device or as part of a scalable EnGenius Neutron wireless network management solution. It provides wireless speeds up to 300Mbps for large homes and small businesses. Key features include support for 802.11b/g/n, Power over Ethernet, two internal antennas, a Gigabit Ethernet port, and ceiling or wall mounting. It can be centrally managed by EnGenius' ezMaster software.
Datasheet EPE4818G
The EnGenius EPE-4818G is a PoE injector that provides power and network connectivity to PoE devices over Ethernet cables up to 300 feet long. It has one Gigabit Ethernet port to connect to a network switch and one PoE output port, and can supply up to 24W of power through the cable. This allows wireless access points and other PoE devices to be installed in places without access to power outlets.
Datasheet EPA2406FP
The document describes the EnGenius EPA2406FP PoE adapter, which provides power and networking over a single Ethernet cable. It can power devices up to 100 meters away, reducing installation costs and time. Key features include compatibility with passive 24V devices, overcurrent protection, and the ability to power devices that require up to 24V/0.6A of power, such as wireless access points or IP cameras. Specifications include an input voltage of 100-240V AC, output of up to 14.4W, operating temperature range of 0-40°C, and dimensions of 100x58.4x33.4mm.
Datasheet EWS350AP
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
EnGenius Europe Datasheet EPG5000
The document provides information about the EnGenius EPG5000 wireless gateway. It has the latest 802.11ac technology and can deliver wireless speeds up to 1.75Gbps. It supports the next generation IPv6 standard and includes security features like WPA/WPA2 encryption. The EPG5000 also functions as an Internet of Things gateway and works with EnGenius' cloud service to remotely monitor and configure connected devices over a home network through mobile apps.
Datasheet EnGenius EAP1750H
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
Datasheet EnGenius EWS660AP
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
Datasheet EnGenius ENH900EXT
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
Datasheet EnGenius EAP300
The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
Datasheet EnGenius EGS1005
The EnGenius EGS1005 is a 5-port gigabit Ethernet switch designed for connecting home entertainment devices like game consoles, set-top boxes, and Blu-ray players to a home network and the Internet. It provides plug-and-play installation and gigabit speeds for fast file transfers and streaming. The switch supports up to 5 devices and requires only a power connection to enable networking between devices.
Datasheet EnGenius EWS210AP
This document provides information on the EWS210AP access point, including its key features and specifications. The EWS210AP supports IEEE 802.11b/g/n wireless standards at up to 300Mbps, has a high power 2.4GHz radio, and supports fast roaming with a RADIUS server. It can operate as a standalone access point but includes firmware to enable discovery, configuration, monitoring and management from EnGenius Neutron-series switches. Operating in the 2.4GHz spectrum with 802.11b/g/n support, it has a Gigabit port and MIMO antennas, making it suitable for spaces like homes, SMBs, offices and hospitals. The E
EnGenius Europe Sales presentation EAP900H and EAP1750H
The document provides product information and specifications for the EAP900H and EAP1750H ceiling mount dual band concurrent access points. It includes details on their key features such as supporting up to 16 SSIDs, traffic shaping, fast client handover, band steering, RADIUS accounting, CLI support, and various security features. Application scenarios mentioned include small offices, coffee shops, hospitals, and classrooms. A product comparison table outlines the differences between the EAP300, EAP350, EAP600, EAP900H and EAP1750H models.
Datasheet EnGenius EGS5212FP
This document provides information about the EnGenius EGS5212FP switch, including its key features and specifications. The EGS5212FP is a full-featured, managed Gigabit Ethernet switch that provides 8 Gigabit PoE+ ports, 2 Gigabit uplink ports, and 2 SFP slots. It offers comprehensive Layer 2 switching capabilities along with PoE+ support and a 130W PoE budget. Some of its main features include IGMP and MLD snooping, VLAN support, QoS, port security, and SNMP management.
Datasheet EnGenius EGS7228FP
The document provides information about the EnGenius EGS7228FP 24-port Gigabit Ethernet switch, including its key features and specifications. The switch has 24 Gigabit Ethernet ports that support Power over Ethernet, along with 4 SFP slots. It provides layer 2 switching functions including VLAN, QoS, IGMP snooping, port security, and SNMP management. The switch is designed for small to medium businesses to cost-effectively expand their network infrastructure with reliable performance.
More Related Content
What's hot
Quick Installation Guide EnStationAC English
This document provides instructions for installing and setting up the EnStationAC device. It includes a list of package contents and minimum requirements. It then provides step-by-step instructions for connecting the EnStationAC device, setting up the computer network configuration, accessing the EnStationAC's web interface, and selecting an operating mode. It also includes instructions for wall mounting or pole mounting the EnStationAC unit.
Product Catalogue 2015 EnGenius Europe
The document is a product catalogue from EnGenius that includes:
- An index listing various product series such as outdoor business solutions, indoor business solutions, PoE switches, and digital cordless phones.
- Information about EnGenius and their expertise in long range wireless solutions.
- Descriptions and specifications for several product series, including custom series for unique deployments, outdoor access points, indoor access points, and PoE switches.
- An example use case of EnGenius wireless products providing a reliable network for a music festival organization.
Datasheet EAP1200H
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
Sales presentation EnStation2 - EnStation 5
The document provides information about EnStation2 and EnStation5 wireless outdoor CPE products, including key specifications, features, selling points, and target markets. The EnStation series features high gain directional antennas, high output power, long transmission ranges up to 10km, various operation modes, and management via EZ Controller software. They are suited for applications requiring long range point-to-point wireless links such as internet access, surveillance cameras, and industrial IoT devices.
Quick Installation Guide EWS300AP English
This document provides instructions for quickly installing an EnGenius EWS300AP managed indoor access point. It lists the package contents and minimum requirements. The steps explain how to connect the access point to a computer via an EnGenius wireless management switch in order to obtain an IP address for configuration. It also provides instructions for mounting the access point to a wall or ceiling using either a mounting bracket or T-rail connectors.
Datasheet EnGenius EnStation2
The EnStation2 is an outdoor wireless device from EnGenius Europe that provides wireless connectivity of up to 300Mbps. It has a high gain directional antenna, supports four operation modes, and can be managed through EZ Controller software. The EnStation2 offers security features like WEP, WPA, WPA2 encryption as well as authentication protocols to enforce security.
Quick Installation Guide EWS350AP English
This document provides installation instructions for the EnGenius EWS350AP managed indoor access point. It describes how to connect the access point to a computer or EnGenius wireless management switch to configure it. It also explains how to mount the access point to a wall or ceiling using the included mounting bracket or T-rail connectors. Setup steps include configuring the computer's IP address, logging into the access point's web interface using the default credentials, and selecting the access point operation mode.
Datasheet EnGenius EGS7228P
The document describes the EnGenius EGS7228P 24-port Gigabit Ethernet switch. It has 24 ports that support 802.3at/af Power over Ethernet (PoE), 4 SFP slots, a 185W PoE budget, and Layer 2 management features. It is designed to support wireless access points and IP surveillance applications for small and medium businesses.
Datasheet EWS300AP
The document describes the EnGenius Neutron EWS300AP wireless access point. It is an affordable single-band 802.11n access point that can operate as a standalone device or as part of a scalable EnGenius Neutron wireless network management solution. It provides wireless speeds up to 300Mbps for large homes and small businesses. Key features include support for 802.11b/g/n, Power over Ethernet, two internal antennas, a Gigabit Ethernet port, and ceiling or wall mounting. It can be centrally managed by EnGenius' ezMaster software.
Datasheet EPE4818G
The EnGenius EPE-4818G is a PoE injector that provides power and network connectivity to PoE devices over Ethernet cables up to 300 feet long. It has one Gigabit Ethernet port to connect to a network switch and one PoE output port, and can supply up to 24W of power through the cable. This allows wireless access points and other PoE devices to be installed in places without access to power outlets.
Datasheet EPA2406FP
The document describes the EnGenius EPA2406FP PoE adapter, which provides power and networking over a single Ethernet cable. It can power devices up to 100 meters away, reducing installation costs and time. Key features include compatibility with passive 24V devices, overcurrent protection, and the ability to power devices that require up to 24V/0.6A of power, such as wireless access points or IP cameras. Specifications include an input voltage of 100-240V AC, output of up to 14.4W, operating temperature range of 0-40°C, and dimensions of 100x58.4x33.4mm.
Datasheet EWS350AP
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
EnGenius Europe Datasheet EPG5000
The document provides information about the EnGenius EPG5000 wireless gateway. It has the latest 802.11ac technology and can deliver wireless speeds up to 1.75Gbps. It supports the next generation IPv6 standard and includes security features like WPA/WPA2 encryption. The EPG5000 also functions as an Internet of Things gateway and works with EnGenius' cloud service to remotely monitor and configure connected devices over a home network through mobile apps.
Datasheet EnGenius EAP1750H
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
Datasheet EnGenius EWS660AP
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
Datasheet EnGenius ENH900EXT
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
Datasheet EnGenius EAP300
The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
Datasheet EnGenius EGS1005
The EnGenius EGS1005 is a 5-port gigabit Ethernet switch designed for connecting home entertainment devices like game consoles, set-top boxes, and Blu-ray players to a home network and the Internet. It provides plug-and-play installation and gigabit speeds for fast file transfers and streaming. The switch supports up to 5 devices and requires only a power connection to enable networking between devices.
Datasheet EnGenius EWS210AP
This document provides information on the EWS210AP access point, including its key features and specifications. The EWS210AP supports IEEE 802.11b/g/n wireless standards at up to 300Mbps, has a high power 2.4GHz radio, and supports fast roaming with a RADIUS server. It can operate as a standalone access point but includes firmware to enable discovery, configuration, monitoring and management from EnGenius Neutron-series switches. Operating in the 2.4GHz spectrum with 802.11b/g/n support, it has a Gigabit port and MIMO antennas, making it suitable for spaces like homes, SMBs, offices and hospitals. The E
EnGenius Europe Sales presentation EAP900H and EAP1750H
The document provides product information and specifications for the EAP900H and EAP1750H ceiling mount dual band concurrent access points. It includes details on their key features such as supporting up to 16 SSIDs, traffic shaping, fast client handover, band steering, RADIUS accounting, CLI support, and various security features. Application scenarios mentioned include small offices, coffee shops, hospitals, and classrooms. A product comparison table outlines the differences between the EAP300, EAP350, EAP600, EAP900H and EAP1750H models.
What's hot (20)
EnGenius Europe Sales presentation EAP900H and EAP1750H
EnGenius Europe Sales presentation EAP900H and EAP1750H
Similar to Datasheet EnGenius EGS2110P
Datasheet EnGenius EGS5212FP
This document provides information about the EnGenius EGS5212FP switch, including its key features and specifications. The EGS5212FP is a full-featured, managed Gigabit Ethernet switch that provides 8 Gigabit PoE+ ports, 2 Gigabit uplink ports, and 2 SFP slots. It offers comprehensive Layer 2 switching capabilities along with PoE+ support and a 130W PoE budget. Some of its main features include IGMP and MLD snooping, VLAN support, QoS, port security, and SNMP management.
Datasheet EnGenius EGS7228FP
The document provides information about the EnGenius EGS7228FP 24-port Gigabit Ethernet switch, including its key features and specifications. The switch has 24 Gigabit Ethernet ports that support Power over Ethernet, along with 4 SFP slots. It provides layer 2 switching functions including VLAN, QoS, IGMP snooping, port security, and SNMP management. The switch is designed for small to medium businesses to cost-effectively expand their network infrastructure with reliable performance.
Datasheet EPE5818Gaf
This document provides information on the EPE-5818Gaf Gigabit PoE Injector from EnGenius Europe. It is compliant with 802.3af PoE standards and can provide 48V DC power and up to 1000Mbps data transmission over Ethernet cables. The injector measures 84 x 47 x 25mm, includes an AC power adapter, and can power devices like wireless access points, IP phones, and webcams remotely via the Ethernet cable.
Datasheet EnGenius EGS7252FP
This document provides information on the EnGenius EGS7252FP layer 2 switch, including its key features and specifications. The switch has 48 Gigabit PoE+ ports with PoE budget of 740W, 4 SFP slots, rich layer 2 features, easy network management through web interface, support for VLANs, multicast, QoS, security, and energy saving features. It provides switching capacity of 104Gbps and is suitable for businesses, schools, and other network deployments.
Datasheet EnStationAC
The EnStationAC is a high-powered outdoor wireless access point/client bridge that offers dual PoE Gigabit ports and high-gain directional antennas. It provides 11ac wireless speeds up to 867Mbps over long distances up to 8km point-to-point. It has an IP55-rated waterproof and dustproof casing and two PoE ports to connect and power additional network devices in remote locations. Key features include powerful 5GHz wireless, quality of service for prioritizing applications, and remote monitoring and configuration via EZ Controller software.
Datasheet EnGenius ENS202EXT
Datasheet, specifications of the EnGenius ENS202EXT - long range 2.4GHz Wireless N300 Outdoor Access Point
Datasheet EWS500AP
The EnGenius EWS500AP is a wall plate access point and switch that provides wireless connectivity, Power-over-Ethernet, and wired ports for in-room devices in hotels, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and can operate as a standalone access point or be centrally managed. The compact design mounts onto a standard junction box and includes antennas, PoE ports, and additional ports to support IPTVs, phones, and other wired devices without extra equipment.
Datasheet EWS2910P-Kit-300
The document describes the EnGenius Neutron EWS2910P-Kit-300 WLAN starter kit which includes an EWS2910P WLAN controller PoE switch and two EWS300AP indoor managed access points. The kit is designed to create or expand a high-powered Wi-Fi network in large homes or small businesses. The EWS2910P can manage up to 20 access points and provides 8 PoE ports. The EWS300AP supports PoE and ceiling or wall mounting, and connects to the EWS2910P for management and configuration. Key features of the devices include wireless speeds up to 300Mbps, centralized management software, and support for multiple SSIDs and VLANs.
Datasheet EPE4818
The document describes the EPE-4818, a standalone Power over Ethernet device that delivers 48V power through Ethernet cables to remotely power devices like wireless access points, IP phones, and webcams. It has a compact brick design, takes in 48V/0.375A power, and outputs 48V/1A power through pins 4, 5, 7, and 8 of an RJ45 connector while still allowing data transmission through pins 1, 2, 3, and 6. The EPE-4818 is designed for powering outdoor networking equipment and installations with low port density.
Datasheet EnGenius ENH202
The ENH202 is a high-speed, long-range outdoor wireless access point or bridge that operates on the 2.4GHz band and supports IEEE 802.11b/g/n standards. It features an integrated 10dBi dual polarization antenna and can transmit wireless data at up to 300Mbps. The ENH202 has a high power output of up to 800mW, enabling connectivity over an extended range. It can function as an access point, client bridge, client router, or wireless distribution system bridge.
Datasheet ENH710EXT
The document provides information on the EnGenius ENH710EXT, a dual-band wireless access point with speeds up to 300Mbps on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE and remote reset functionality. It also supports AP, client bridge and WDS modes for flexible deployment and can be managed through a web interface or EnGenius Zone Controller software.
Datasheet EPE48GR
The document provides information about the EPE-48GR PoE injector from EnGenius Europe. It can provide up to 48V/0.8A of power over Ethernet to remotely power devices like wireless access points, IP phones, and webcams. It supports speeds up to 1000Mbps and is designed for outdoor use with low port density installations. Key features include transforming AC power to 48V DC power to inject over CAT5 cable and supporting models ENH210, ENH210EXT, ENH700EXT, EAP600, and ECB600.
Datasheet EnGenius EWS7928P
The document provides information on the EnGenius EWS7928P, a 24-port Gigabit PoE+ Layer 2 switch with 4 dual-speed SFP ports. It can discover, configure, manage and monitor up to 50 EnGenius Neutron-series wireless access points through its browser-based GUI. Key features include wireless management capabilities, 56Gbps switching capacity, 185W PoE budget, and support for VLANs, QoS, ACLs, and other standard Layer 2 functions.
Datasheet EPA5006GAT
The EnGenius 802.3at/af Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single CAT5/6 cable. It delivers up to 30W of power for devices like access points, IP cameras, and VoIP phones. The compact adapter has surge protection and supports both 10/100/1000 Ethernet and Power over Ethernet for flexible deployment of network devices in locations without power outlets.
Datasheet EnGenius ENS202
The ENS202 is a high-power, long-range wireless access point with a built-in 8dBi dual-polarity directional antenna. It provides wireless speeds up to 300Mbps and a range of up to 400m. The device has advanced security features, multi-operation modes, and is designed for reliable outdoor use in harsh environments. It can be used to build scalable wireless networks for applications like surveillance and industrial IoT.
Datasheet ENH220EXT
The document provides information on the EnGenius ENH220EXT outdoor wireless access point. It has the following key features:
- Provides wireless connectivity at speeds up to 300Mbps with 2.4GHz 802.11b/g/n support.
- Has an IP68-rated waterproof enclosure and flexible mounting options to operate in harsh outdoor environments.
- Includes two Gigabit Ethernet ports that support Power over Ethernet (PoE) for power and remote reset functionality.
- Can be configured through a web interface or EnGenius Zone Controller software for centralized management of multiple devices.
Datasheet EnGenius ECB350
The EnGenius ECB350 is a wireless-n multi-function gigabit access point that delivers data transfer rates up to 300Mbps. It offers extended wireless coverage through external 5dBi antennas, secure network management through multiple SSIDs and VLANs, and flexible power options through 802.3af PoE support. The ECB350 provides 8 operation modes and is suitable for expanding existing networks or increasing bandwidth for additional users.
Datasheet EnGenius ENH700EXT
The document is a datasheet for the EnGenius ENH700EXT wireless outdoor access point. It provides high-level details about the access point's frequency bands, data rates, security features, operating modes, and environmental specifications. The ENH700EXT operates on both 2.4GHz and 5GHz bands, supports data rates up to 600Mbps, and has certified IP-68 protection for outdoor use. It offers various security protocols, up to 8 SSIDs per radio, and quality of service features.
Datasheet EnGenius EWS5912FP
The document provides information on the EnGenius EWS5912FP wireless management switch. It can manage up to 50 wireless access points and provides 8 Gigabit PoE ports. It offers an intuitive GUI for easily monitoring and configuring a wireless network, including features like topology view, floor plan view, map view, and remote access point rebooting and firmware upgrades. The switch integrates seamlessly into existing networks and provides advanced wireless capabilities such as band steering, fast roaming, and mesh networking.
Datasheet EnGenius EWS7952FP
The document describes the EnGenius EWS7952FP, a centralized wired/wireless management system for small to medium businesses. It can manage up to 50 wireless access points through a single web interface without additional costs. It functions as both a wireless controller and PoE gigabit switch, providing robust management of the network. It has an intuitive interface for easy configuration and monitoring of clients, access points, and traffic. It also supports advanced wireless features like band steering, fast roaming, and guest networks.
Similar to Datasheet EnGenius EGS2110P (20)
More from EnGenius Europe
Datasheet EWS650AP
The EWS650AP is an outdoor dual-band 11ac wireless access point that provides speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. It has a high power transmitter and internal antennas for extended outdoor wireless coverage. The access point can operate as a standalone device or be centrally managed as part of a scalable wireless network solution using EnGenius management software and switches. It features an IP55-rated weatherproof enclosure to withstand harsh outdoor environments.
Datasheet EPA5006GP
The EnGenius passive 54V Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single cable. It provides up to 32.8 watts of power for devices like access points and IP cameras while also supporting high-speed Gigabit Ethernet connectivity. The compact adapter has surge protection to safeguard connected equipment from power issues and includes wall mounting hardware for flexible installation.
Quick Installation Guide EWS650AP English
This document provides installation instructions for the EnGenius EWS650AP managed indoor access point. It outlines how to connect the access point to a computer or EnGenius wireless management switch to configure its IP address and settings. Instructions are given for stand-alone installation without a management switch as well as mounting options including wall mounting and pole mounting.
ezMaster User manual
This document provides an overview and instructions for installing and using ezMaster, a centralized network management system for EnGenius Neutron Series access points. It describes the ezMaster software, compatible access points, deployment scenarios, system requirements, and instructions for importing the ezMaster virtual machine image. It also outlines the main dashboard, device management features, monitoring, visualization, statistics, and maintenance capabilities available in ezMaster.
ezMaster Neutron solution Datasheet
The Neutron-series distributed network management solution from EnGenius offers complete scalability, unlimited flexibility, and lower costs compared to other solutions. It allows users to manage from 1 to 1,000+ access points and switches, with 10,000+ concurrent users across unlimited distributed networks. The solution includes Neutron managed access points, Neutron WLAN controller switches, and ezMaster centralized network management software. It provides simplified deployment and management, optimized wireless performance, and enterprise-class features at an affordable price point with no access point licensing fees.
Datasheet EWS2910P
The document provides information about the EnGenius Neutron EWS2910P WLAN controller switch, which is an 8-port Gigabit PoE Layer 2 switch with two dual-speed SFP fiber uplink ports. It can discover, configure, manage and monitor up to 20 EnGenius Neutron access points through its web-based interface. Key features include wireless management capabilities, Layer 2 features, and technical specifications such as 802.3af PoE support and an operating temperature range of 0 to 50°C.
Quick Installation Guide EWS500AP English
This document provides instructions for quickly installing an EnGenius EWS500AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or outlet box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through the swift setup and deployment of the new access point.
Quick Installation Guide EWS510AP English
This document provides instructions for quickly installing an EnGenius EWS510AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or electrical box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through a simple installation process.
Quick Installation Guide EWS2910P English
The document is a quick installation guide for an EnGenius EWS2910P wireless management switch. It includes instructions on unpacking the package contents, installing the switch on a flat surface or wall, connecting the switch to a computer and access points, configuring the IP addresses, accessing the management interface, locating and managing connected access points, and managing the switch configuration. Setup and management can be done through a web browser-based graphical user interface.
Quick Installation Guide EWS2910P-Kit-300 English
This document provides instructions for installing and setting up an EnGenius EWS2910P wireless management switch and associated access points. It includes unpacking the switch and contents, installation instructions for mounting the switch on a surface or wall, connecting the switch to a computer and access points, and configuring basic network and device settings through the switch's web interface. Setup of a single access point is also outlined, covering physical connection to the switch, IP configuration, and wall or ceiling mounting of the access point.
More from EnGenius Europe (18)
Recently uploaded
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Available 24/7
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
Recently uploaded (20)
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Call Girls Chandigarh🔥7023059433🔥Agency Profile Escorts in Chandigarh Availab...
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Datasheet EnGenius EGS2110P
- 1. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands 0900-9434222 (0900-WIFIABC) | www.engenius-europe.com Disclaimer: Information may be subject to changes without prior notification https://www.linkedin.com/company/engeniuseurope https://plus.google.com/+EngeniusEuropeBVDeMeern https://www.youtube.com/user/engeniuseuropebv https://twitter.com/engeniuseu Datasheet EGS2110P • 8 Gigabit ports with IEEE802.3af PoE support • 2 SFP slots • External power adapter with 61.6w PoE budget • IGMP Snooping PoE to power and connect devices and Gigabit speed for small businesses. Gigabit speed for small businesses The EGS2110P is a Smart PoE switch that offers 8 Gigabit ports with IEEE802.3af PoE support on all its ports and 2 SFP slots for fiber uplinks. Power over Ethernet (PoE) EnGenius smart PoE (Power-over-Ethernet) Gigabit switches are specifically designed to meet the needs of start-up and small-to-medium sized businesses. It’s ideal for companies that need a way to connect and power VoIP phone systems, IP cameras and wireless access points throughout their facilities. These robust and fully-managed, yet cost-effective switches will help to keep their employees connected, safe and productive. The EGS2110P delivers upto 15.4 watts over connected Ethernet cables to powered devices. Total PoE budget is 61.6 watts. Management EnGenius switches also include embedded QoS intelligence to prioritize delay-sensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone into your IP telephony network and receive an immediate dial tone. Key features
- 2. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands 0900-9434222 (0900-WIFIABC) | www.engenius-europe.com Disclaimer: Information may be subject to changes without prior notification https://www.linkedin.com/company/engeniuseurope https://plus.google.com/+EngeniusEuropeBVDeMeern https://www.youtube.com/user/engeniuseuropebv https://twitter.com/engeniuseu Datasheet EGS2110P Standard Switching capacity: 16 Gbps Max. Forwarding rate (64kBytes): 14.88Mpps Forwarding mode: Store and Forward Packet buffer memory: 512K Bytes Flash memory: 4 MB Port functions 8* 10/100/1000Mbps Ports in the front panel 2* 1000Mbps SFP slot PoE capability PoE standard: Port 1~8 support IEEE 802.3af PoE capable ports: Port 1~8 can output up to 15.4W PoE budget: 61.6 Watts LED indicator Device: 1* Power LED 1* Fault LED 1* PoE max LED 1* LAN mode LED 1* PoE mode LED 1* SFP/Copper ports: 1* LAN/PoE mode, Link/Act Environment & mechanical Temperature range Operating: 32 to 104°F / 0 to 40°C Storage: -40 to 158°F / -40 to 70 °C Humidity (non-condensing) 5% - 95% L2 features Loopback detection IGMP snooping v1/v2 Port mirroring: one to one and many to one Static MAC address Dynamic MAC list Bandwidth control 802.1Q VLAN Port-based VLAN Storm Control PoE management Power on/off per port Power class configuration Power feeding with priority User defined power limit BootP/DHCP Client Firmware burn-proof Cable diagnostic