Find a Chinese DALI constant current dimming driver supplier fast. Shanghai Euchips provides all kinds of DALI constant current dimming driver for customers at home and abroad.
1. Available to dimming the lights brightness
2. Constant current output, current level selectable by internal jumpers
3. Using 2.4GHz RF remote control
4. Wide range of input voltage 100VAC ~ 240VAC
5. High efficiency up to 80%
6. Protections: SCP.
7. Suitable for indoor LED lighting application
Find a Chinese DALI constant current dimming driver supplier fast. Shanghai Euchips provides all kinds of DALI constant current dimming driver for customers at home and abroad.
1. Available to dimming the lights brightness
2. Constant current output, current level selectable by internal jumpers
3. Using 2.4GHz RF remote control
4. Wide range of input voltage 100VAC ~ 240VAC
5. High efficiency up to 80%
6. Protections: SCP.
7. Suitable for indoor LED lighting application
Your intelligent electrical devices - also in your garden!
Popp controlled IP44 socket is suited for indoor and outdoor use. Simply placed between the wall socket and the set to be controlled. It is an easy drive to use, a basic component of its smart home really important. All electrical equipment in and around your home can be controlled by the on / off controls and become more intelligent.
This takeover can control any load up to 3500 W. A multi-color LED indicates the output status, and the user can set the same color. The button to control functions on / off locally, but can also be used to control other functions of the Z-Wave network. In fact, the single and double clicks are distinguished. The machine indicates any change in the connection status of the controller box or home automation, whatever the origin of the order (local or Z-Wave).
The device is rated IP44 and therefore can be used in both wet and dry environments, whether inside or outside. A virtual power meter is integrated for reporting energy consumption of the connected load. However, the user must configure the module with constant power load.
The device is certified and tested to comply with all relevant European safety standards and is fully compatible with the Z-Wave Plus standard. The device supports secure communication and firmware can be updated via the Z-Wave network (OTA).
CHARACTERISTICS:
Place a lamp or a remote device
Integration module taken directly from an electrical outlet and charge control
Power on / off to control lights or appliances (unchanged)
Control of local support through integrated button
Status LED
Integrated virtual power meter
It supports secure communications
The Z-Wave technology +
IP44 protection for use in damp areas (bathroom, garden, ...)
Firmware Update (OTA)
TECHNICAL CHARACTERISTICS :
Module Type: Z-Wave receiver
Power supply: 230 V, 50 Hz
Maximum power (any load): 3500W (16A)
Fuse: T 1.25 AH
Frequency: 868.42 Mhz
Range: Up to 100 m outdoors, up to 30 m in buildings
Protection: IP44
Display: LED multicolor
find the top supplier of constant current dali decoder. Shanghai Euchips' constant current dali decoder supports Touch DIM function, and can be dimmed manually.
Mini jack On / Off is designed to control the switching on and off lighting and electrical equipment in your home. With a voltage of 220 - 240 V, this socket can withstand loads up to 1500W (resistance), 800W (incandescent), 200W (motor, fluorescent, LED)
Mini Socket Dimmer is designed to control the switching on and off lighting and electrical equipment in your home. It also enables a dimming function that is only compatible with the bulbs. With a voltage of 220 - 240 V, this jack converter can support a
Shanghai Euchips 12-24VDC 180-360W 0-10V/1-10V constant voltage dimmer DIM151A-DIN. This constant voltage dimmer supports 0-10v/1-10v active dimming and touch dim function.
Facebook is a great way for animal shelters and rescues to interface with the public, get the word out about adoptable pets, and attract support and volunteers. But it also results in increased scrutiny, from situations taken out of context to tragic mistakes that can’t be undone. In this webinar you’ll learn tips and best practices for how to handle those situations on social media as they arise, learn from them, and prevent them in the future.
Note-This presentation is for organizations active on social media platforms Facebook and Twitter.
Your intelligent electrical devices - also in your garden!
Popp controlled IP44 socket is suited for indoor and outdoor use. Simply placed between the wall socket and the set to be controlled. It is an easy drive to use, a basic component of its smart home really important. All electrical equipment in and around your home can be controlled by the on / off controls and become more intelligent.
This takeover can control any load up to 3500 W. A multi-color LED indicates the output status, and the user can set the same color. The button to control functions on / off locally, but can also be used to control other functions of the Z-Wave network. In fact, the single and double clicks are distinguished. The machine indicates any change in the connection status of the controller box or home automation, whatever the origin of the order (local or Z-Wave).
The device is rated IP44 and therefore can be used in both wet and dry environments, whether inside or outside. A virtual power meter is integrated for reporting energy consumption of the connected load. However, the user must configure the module with constant power load.
The device is certified and tested to comply with all relevant European safety standards and is fully compatible with the Z-Wave Plus standard. The device supports secure communication and firmware can be updated via the Z-Wave network (OTA).
CHARACTERISTICS:
Place a lamp or a remote device
Integration module taken directly from an electrical outlet and charge control
Power on / off to control lights or appliances (unchanged)
Control of local support through integrated button
Status LED
Integrated virtual power meter
It supports secure communications
The Z-Wave technology +
IP44 protection for use in damp areas (bathroom, garden, ...)
Firmware Update (OTA)
TECHNICAL CHARACTERISTICS :
Module Type: Z-Wave receiver
Power supply: 230 V, 50 Hz
Maximum power (any load): 3500W (16A)
Fuse: T 1.25 AH
Frequency: 868.42 Mhz
Range: Up to 100 m outdoors, up to 30 m in buildings
Protection: IP44
Display: LED multicolor
find the top supplier of constant current dali decoder. Shanghai Euchips' constant current dali decoder supports Touch DIM function, and can be dimmed manually.
Mini jack On / Off is designed to control the switching on and off lighting and electrical equipment in your home. With a voltage of 220 - 240 V, this socket can withstand loads up to 1500W (resistance), 800W (incandescent), 200W (motor, fluorescent, LED)
Mini Socket Dimmer is designed to control the switching on and off lighting and electrical equipment in your home. It also enables a dimming function that is only compatible with the bulbs. With a voltage of 220 - 240 V, this jack converter can support a
Shanghai Euchips 12-24VDC 180-360W 0-10V/1-10V constant voltage dimmer DIM151A-DIN. This constant voltage dimmer supports 0-10v/1-10v active dimming and touch dim function.
Facebook is a great way for animal shelters and rescues to interface with the public, get the word out about adoptable pets, and attract support and volunteers. But it also results in increased scrutiny, from situations taken out of context to tragic mistakes that can’t be undone. In this webinar you’ll learn tips and best practices for how to handle those situations on social media as they arise, learn from them, and prevent them in the future.
Note-This presentation is for organizations active on social media platforms Facebook and Twitter.
Theoretische maar toch praktisch gebruik van de osmolaliteitsmeter en pipet. kom in één dag alles te weten over osmolaliteitsbepaling met een deel theorie en praktijk, waarbij ook aandacht voor het nauwkeurig pipetteren van monsters. Voor gebruikers van de osmometer in de farmacie, klinische chemie, biotechnologie en andere industrieën.
iLumTech have developed a range of devices for the professional lighting market with the aim of being inimitable and simple to install for lighting manufacturers, installers, electrical engineers, and even end users. All of the devices were created by our own optical, thermal, and electronic engineers, and produced locally. We are sure you will be satisfied with their user-friendly and intelligent functionality, offered at an appealing price level. Our portfolio is divided into three groups: Connected Lighting, LED Units, and Optical Solutions.
Find a good 1-10v constant current led dimmable driver fast. Shanghai Euchips' 1-10v led dimmable driver supports 1-10V analog dimming signal, passive or active signal.
1. Single-channel constant current output, selected by Dip-switch 2. Support Leading edge (Triac) and Trailing edge (ELV) dimming 3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker z High efficiency up to 82%.
5. Short current protection
6. Suitable for indoor LED lighting application, such as down light, panel light, and so on
The brochure Connected lighting introduces devices which iLumTech presents under the brand Connected lighting - several lighting control components (fully DALI compatible) for small and middle size installations. All of these devices have the common aim: to deliver to customers the most often functions from the intelligents lighting management products for a reasonable price with an easy installation. “Connected lighting” devices are developed by iLumTech combined cleverly together with the aim of offering customers maximum satisfaction and enjoyment while operating tailored lighting installation.
• One4all design(DALI-2, Push-DIM, 0-10V, 10V PWM)
• DALI member, compatible with universal DALI masters
• Tested in DALI house according to IEC 62386 Part 101,102(DALI-2), 207
• ENEC, CE, CB approved by TUV SUD, SAA, Ctick qualified
• Adjustable constant current output from 650 to 1100 mA(Preselected 650mA), and 250mA to 600mA(Preselected 250mA)
• Reliable, Class II, SELV according EN 61347
• Independent ECG and with strain-relief.
• Permissible AC cable 0.5-1.5mm² wire gauge, 3.5~8mm PVC jacket diameter
• Working Ta=-25°C ~ +45°C
• 50,000 hrs nominal lifespan
• 5-year factory guarantee
• Flicker Free(less than 3% flicker percentage)
• Built-in active PFC
• Built--in with permanent memory for DALI and Push-DIM, 100,000 times memory
• Grow wire tested 650° for 30S and 850° for 5S
• Push-DIM, from 100% to 1.5% dimming range
1. Single-channel constant current output, selected by Dip-switch
2. Support Leading edge (Triac) and Trailing edge (ELV) dimming
3. Dimming range from 40VAC to 240V AC.
4. Dimming effect smooth, no flicker
5. High efficiency up to 81%.
6. Short current protection
7. Suitable for indoor LED lighting application, such as down light, panel light, and so on
1. Analog Signal driver, receive 1-10V dim signal.
2. Single channel output, Max.5A .
3. Input & Output isolated electrically
4. Support active&passive dim signal
5. Support SCP and OCP
Shanghai Euchips 200-240VAC 40W Constant Voltage Triac Driver EUP40T-1W12V-0 supports leading edge and trailing edge dimming. The max efficiency is 85%. The dimming effect is smooth and no flicker.
Shanghai Euchips 12-24VDC 180-360W 0-10V constant voltage dimmer Multidim-15v-0. This is a multi-functional LED dimmer, dimming mode, dimming curve, min brightness level all can be selected by dip switch. sales@euchips.com
Mini Zipato drive with energy measurement allows the variation in your interior lighting to create a pleasant atmosphere in your home and also help you to reduce your energy consumption. Actually it is able to transmit the instantaneous power consumption (W) and cumulative (KWh) of equipment attached to it.
Similar to dali cosntant current led dimmable driver (20)
1. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42D-1HMC-0 User Manual V01.1 1 www.euchips.com
EUP42D-1HMC-0
DALI Constant Current Dimming Driver
Product Features
Single channel output, output current level selectable by DIP S.W.
Meet DALI Protocol IEC 62386
Support Touch-DIM function
High input voltage of 200VAC ~ 240VAC
High efficiency up to 85%
Built-in active PFC function
100% output when no dimming signal input,
can be used as normal power supply
Dimming effect smooth, no flicker
Protections: Over load
Suitable for indoor LED lighting application,
such as down light, panel light, and so on
Technical Parameters
Model EUP42D-1HMC-0
Output
Current 900mA 1050mA 1200mA
Voltage 3-47VDC 3-40VDC 3-35VDC
Power 42.3W 42W 42W
Current Accuracy ±5%
Maximum Output Voltage 50VDC
R & N (Max) 200mVp-p
Channels 1
Input
Voltage 200– 240VAC
Frequency 50/60Hz
Power Factor(Typ) ≥0.9
Efficiency(Typ) 85%
Current 0.3Amax@230VAC
Inrush Current 30A@230VAC
Protection Over Load Close output,recovers automatically after fault removed
Function Dimming DALI /Touch DIM
Others
Dimension 122*78*32 mm(L*W*H)
G.W 190g
Working temp. -20℃ ~ 40℃
Relative humidity 20~90% RH
2. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42D-1HMC-0 User Manual V01.1 2 www.euchips.com
Dimension(mm)
Wiring Diagram
Current Selection Table
EUP42D-1HMC-0 is a multi-current dimming driver, output current level selectable by DIP S.W., as the following:
Current DIP-1 DIP-2
900mA OFF OFF
1050mA ON OFF
1200mA ON ON
Remark: Function default setting is: 900mA (@switch are all OFF state)
DALI Diagram
3. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42D-1HMC-0 User Manual V01.1 3 www.euchips.com
Touch DIM diagram
Remark: Only use open push button without indicator light. Maximum cable length between each Unit: 20 meters.
Touch DIM function
1. Short press the Touch DIM switch (<0.5s) to control the lamp on or off.
2. Long press the Touch DIM switch (>0.5s) to dim the brightness of light. The dimming direction will change every
time after pressing switch.
4. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42D-1HMC-0 User Manual V01.1 4 www.euchips.com
3. Double-click the Touch DIM switch (<0.3s), then all lamps connected on the device will be set maximum
brightness.
4. The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when doing
the adjustment with long pressing Touch DIM switch.
5. With the Power off memory function, the power-down state will be recovered when power on again.
Cautions
1. This unit must be installed by a qualified electrician.
2. DALI and Touch DIM functions cannot be used simultaneously, which can be controlled respectively by using
DALI controllers or the equipments with Touch DIM function.
3. Please read the wiring diagram before installation.
4. Use suitable mounting tools to do the wiring and mounting.
5. Please check the connecting method is correct or not before connecting the power.