Find a 1-10v constant current dimmable driver fast. Shanghai Euchips offer customers all sorts of 1-10v constant current dimmable driver.

1. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP30A-1HMC-1 User Manual V01.1 1 www.euchips.com
EUP30A-1HMC-1
1-10V Constant Current Dimming Driver
Product Features
Single channel output, output current level selectable by DIP S.W.
Support 1-10V analog dimming signal, passive or active signal
High input voltage of 200VAC ~ 240VAC
High efficiency up to 83%
Built-in active PFC function
100% output when no dimming signal input,
can be used as normal power supply
Dimming effect smooth, no flicker
Protections: Over load, short circuit
Suitable for indoor LED lighting application,
such as down light, panel light, and so on
Technical Parameters
Model EUP30A-1HMC-0
Output
Current 600mA 700mA 800mA 900mA
Voltage 3-50VDC 3-43VDC 3-37VDC 3-34VDC
Power 30W 30.1W 30.1W 30.6W
Current accuracy ±3%
Maximum output voltage 58VDC
R & N (Max) 300mVp-p
Channels 1
Input
Voltage 200– 240VAC
Frequency 50/60Hz
Power factor（Typ） ≥0.9
Efficiency(Typ) 83%
Current 0.2Amax@230VAC
Inrush current 20A@230VAC
Protection
Short circuit Close output，recovers automatically after fault removed
Over power
Above 110%-150% of rated output power, constant voltage
limiting
Function Dimming 1-10V dimming (Passive or active)
Others
Dimension 150*43*29 mm（L*W*H）
G.W 150g
Working temp. -20℃ ~ 40℃
Relative humidity 20~90% RH

2. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP30A-1HMC-1 User Manual V01.1 2 www.euchips.com
Dimension(mm)
Wiring Diagram
Current Selection Table
EUP30A-1HMC-0 is a multi-current dimming driver, output current level selectable by DIP S.W., as the following:
Current DIP-1 DIP-2
600mA OFF OFF
700mA ON OFF
800mA OFF ON
900mA ON ON
Remark: Function default setting is 600mA (@switch are all OFF state)