This document is a shop manual for maintaining a Doosan DX19 compact excavator. It provides safety instructions for maintenance and repair, including warnings about avoiding silica dust, preventing fires during maintenance, operation and fueling, and dangers of electrical components and batteries. Serial number locations for the excavator and engine are identified. The manual contents section lists the various systems covered in the manual, including hydraulic, undercarriage, electrical, and engine systems.
El presente documento expone una descripción completa de las distintas partes de un módulo solar fotovoltaico así como las distintas tipologías más usadas en las instalaciones de producción de energía (monocristalina, policristalina y silicio amorfo). También se describe la influencia que factores como la temperatura y la irradiancia solar tienen sobre los principales parámetros eléctricos del módulo.
The document contains technical specifications for various engine parts including cylinders, pistons, and rotors. It lists the part numbers, whether they are domestic or imported, specifications like diameter and quantity of pistons, and associated new and old part numbers. The specifications are organized into multiple series indicating different models.
The document discusses Delphi's products and services for diesel applications in vehicles. It highlights Delphi's complete solutions for fuel systems, engine management, injection, air conditioning and cooling, diagnostics equipment, training and technical support, steering and suspension, and ignition. It emphasizes Delphi's high quality standards from the original equipment market and its ability to provide 100% guarantees on products. It also discusses Delphi's extensive training programs for technicians.
This document provides technical specifications for a meat grinder in Portuguese. It lists dimensions of 415mm height, 315mm width, and 715mm length, weighing 43kg. It can produce approximately 300kg/hour of ground meat. Power consumption is 0.92kW/hour, running on 110/220 volts. The motor is 1.25hp single phase 50-60Hz. It includes a list and diagram of 31 component parts.
The document summarizes the EMPULSE clinical trial which evaluated the use of empagliflozin in patients hospitalized for acute heart failure. The trial randomized approximately 500 patients within 5 days of hospitalization to empagliflozin 10mg or placebo once daily. The primary endpoint was a composite of death, heart failure events and change in symptoms after 90 days. Key results showed the primary endpoint was met with empagliflozin reducing the risk of the composite endpoint compared to placebo. Empagliflozin also showed benefits on secondary endpoints including time to cardiovascular death or heart failure event and was found to have an excellent safety profile in acute heart failure patients.
Siemens s7 300-400-standard software for s7-300 and s7-400 standard functions...Dien Ha The
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Este documento presenta información sobre la energía eólica en América Central. Explica que la energía eólica se puede usar para aplicaciones mecánicas y generación eléctrica a pequeña y gran escala. Además, describe brevemente la historia y estado actual de la energía eólica a nivel mundial y en la región centroamericana. El objetivo del manual es informar al lector sobre esta tecnología renovable en el contexto centroamericano.
XIII Reunión anual de la sección de Insuficiencia Cardiaca de la SEC
OVIEDO, 16-18 JUNIO 2016 HOSPITAL UNIVERSITARIO CENTRAL DE ASTURIAS (HUCA)
http://secardiologia.es/insuficiencia/cientifico/ic-oviedo-2016
Utilidad de las técnicas de imagen de la insuficiencia cardiaca y trasplante ¿Qué técnica debemos utilizar y qué nos aporta en cada situación clínica?
VIERNES, 17 DE JUNIO 10:30-12:15 SALÓN DE ACTOS
Cardiopatías con función sistólica preservada
Violeta Sánchez Sánchez, Madrid
El presente documento expone una descripción completa de las distintas partes de un módulo solar fotovoltaico así como las distintas tipologías más usadas en las instalaciones de producción de energía (monocristalina, policristalina y silicio amorfo). También se describe la influencia que factores como la temperatura y la irradiancia solar tienen sobre los principales parámetros eléctricos del módulo.
The document contains technical specifications for various engine parts including cylinders, pistons, and rotors. It lists the part numbers, whether they are domestic or imported, specifications like diameter and quantity of pistons, and associated new and old part numbers. The specifications are organized into multiple series indicating different models.
The document discusses Delphi's products and services for diesel applications in vehicles. It highlights Delphi's complete solutions for fuel systems, engine management, injection, air conditioning and cooling, diagnostics equipment, training and technical support, steering and suspension, and ignition. It emphasizes Delphi's high quality standards from the original equipment market and its ability to provide 100% guarantees on products. It also discusses Delphi's extensive training programs for technicians.
This document provides technical specifications for a meat grinder in Portuguese. It lists dimensions of 415mm height, 315mm width, and 715mm length, weighing 43kg. It can produce approximately 300kg/hour of ground meat. Power consumption is 0.92kW/hour, running on 110/220 volts. The motor is 1.25hp single phase 50-60Hz. It includes a list and diagram of 31 component parts.
The document summarizes the EMPULSE clinical trial which evaluated the use of empagliflozin in patients hospitalized for acute heart failure. The trial randomized approximately 500 patients within 5 days of hospitalization to empagliflozin 10mg or placebo once daily. The primary endpoint was a composite of death, heart failure events and change in symptoms after 90 days. Key results showed the primary endpoint was met with empagliflozin reducing the risk of the composite endpoint compared to placebo. Empagliflozin also showed benefits on secondary endpoints including time to cardiovascular death or heart failure event and was found to have an excellent safety profile in acute heart failure patients.
Siemens s7 300-400-standard software for s7-300 and s7-400 standard functions...Dien Ha The
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Este documento presenta información sobre la energía eólica en América Central. Explica que la energía eólica se puede usar para aplicaciones mecánicas y generación eléctrica a pequeña y gran escala. Además, describe brevemente la historia y estado actual de la energía eólica a nivel mundial y en la región centroamericana. El objetivo del manual es informar al lector sobre esta tecnología renovable en el contexto centroamericano.
XIII Reunión anual de la sección de Insuficiencia Cardiaca de la SEC
OVIEDO, 16-18 JUNIO 2016 HOSPITAL UNIVERSITARIO CENTRAL DE ASTURIAS (HUCA)
http://secardiologia.es/insuficiencia/cientifico/ic-oviedo-2016
Utilidad de las técnicas de imagen de la insuficiencia cardiaca y trasplante ¿Qué técnica debemos utilizar y qué nos aporta en cada situación clínica?
VIERNES, 17 DE JUNIO 10:30-12:15 SALÓN DE ACTOS
Cardiopatías con función sistólica preservada
Violeta Sánchez Sánchez, Madrid
Ticagrelor and Aspirin or Aspirin alone in Acute Ischmic Stroke or TIA(THALES...Diptiman Behera
This document summarizes the results of the THALES clinical trial which compared ticagrelor plus aspirin to aspirin alone for preventing stroke in patients with minor acute ischemic stroke or high-risk transient ischemic attack (TIA). The trial found that ticagrelor plus aspirin reduced the risk of the primary outcome of stroke or death compared to aspirin alone, with rates of 5.5% vs 6.6% respectively. Rates of the secondary outcome of subsequent ischemic stroke were also lower in the ticagrelor group. Rates of disability did not differ between groups. Severe bleeding was higher with ticagrelor but intracranial hemorrhage was similar between groups. The study demonstrates
Catálogo m80,m85,m90 id e m93 id diesel explodidoJunior Iung
Este documento lista os componentes do sistema de motor, incluindo o bloco do motor, sistema de partida auxiliar, sistema de regulagem de RPM, sistema de cilindro, pistão e anéis. São listados 68 itens individuais com seus respectivos códigos e descrições.
Natriuretic peptides like BNP and NT-proBNP are important biomarkers for the diagnosis and management of congestive heart failure (CHF). BNP is released from cardiac ventricles in response to increased wall stress and levels correlate with left ventricular dysfunction. While both BNP and NT-proBNP can help diagnose CHF, NT-proBNP is more stable and its levels better predict mortality and rehospitalization risk in patients with CHF. The diagnostic accuracy of BNP and NT-proBNP can be affected by factors like renal function, obesity, and atrial fibrillation.
JCB 526S Telescopic Handler Service Repair Manual SN:1182000 Onwardsfjsekkdmmem
This is the Highly Detailed factory service repair manual for theJCB 526S TELESCOPIC HANDLER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 526S TELESCOPIC HANDLER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Steering
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 526S TELESCOPIC HANDLER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
El documento describe diferentes tipos de cajas registro Condulets utilizadas en sistemas de tubería conduit para facilitar la instalación y mantenimiento de conductores eléctricos. Las cajas registro están disponibles en varias series, tamaños y materiales como aluminio, fundición de hierro o feraloy, y cuentan con tapas, empaques y tornillos para proteger los conductores. Las cajas registro Condulets facilitan la instalación de conductores eléctricos en sistemas de tubería conduit y el acceso futuro para mantenimiento.
Recent advances in the management of pulmonary arterial hypertensionDr Siva subramaniyan
This document summarizes recent advances in the management of pulmonary arterial hypertension (PAH). It discusses the pathophysiology and classification of PAH and outlines treatment approaches including nonspecific supportive therapies, prostacyclin pathway drugs, endothelin receptor antagonists, phosphodiesterase-5 inhibitors, and combination therapy regimens. Non-medical therapies like atrial septostomy and lung transplantation are also reviewed. Recent research focuses on restoring BMPR-II signaling, targeting inflammation, and cell-based therapies for PAH.
Jcb dieselmax engine (sa sc build) service repair manualfujjdjjkskemme
This document is a service manual for the JCB Dieselmax mechanical engine. It contains sections on general information, care and safety, maintenance, systems descriptions, fault finding, test procedures, and information on the fuel, cooling, lubrication and electrical systems. It provides identification information for engine components, technical specifications, torque settings, recommended lubricants and capacities, service tools, repair parts and kits, lifting instructions, and starting and operating procedures.
Este documento establece los requisitos y métodos para realizar exámenes visuales. Describe que debe haber un procedimiento escrito para los exámenes visuales que incluya detalles como la técnica utilizada, preparación de superficies, equipo requerido, y documentación de resultados. También establece requisitos para el personal autorizado a realizar exámenes visuales, como una evaluación anual de la vista. Finalmente, detalla diferentes técnicas de examen visual como directa, remota y translúcida.
Takeuchi tl230 track loader parts catalogue manual (serial no. 223100001 and up)ujfjjskekmemm
This document provides parts information for a TL230 crawler excavator. It includes exploded diagrams and part lists for various assemblies of the excavator, including the undercarriage, frame, hydraulic components, and electrical system. The parts are identified by number, with corresponding part names and quantities listed. Service and remark columns are included. The document contains detailed technical specifications for maintenance and repair of the excavator.
Takeuchi tl230 track loader parts catalogue manual (serial no. 223000001 and up)ujfjjskekmemm
This document provides parts lists and diagrams for components of a TL230 excavator with serial numbers 223000001-223000110. It includes sections on track rollers, idlers, travel devices, frames, stoppers, hooks, and operation levers/stands with diagrams labeling each individual part and providing part numbers and quantities. Measurement units are provided in Japanese (mm).
Takeuchi tl230 track loader operator manual serial no. 223000859 and upujfjjskekmemm
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating temperature limits, preventing fire hazards, and knowing emergency procedures in case of fire or other accidents. Proper maintenance is emphasized to prevent combustible debris buildup that could cause fires.
New holland 9070 l grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing CNH Industrial grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. It provides removal and installation instructions as well as specifications for servicing various components of the harvesters.
New holland 9070 grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing CNH Industrial grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. It provides removal and installation instructions as well as specifications for servicing various components of the harvesters.
New holland 9050 ll grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and platform/bodywork. It provides repair and maintenance instructions intended for qualified dealership personnel and includes safety warnings.
New holland 9050 l high grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
New holland 9050 l grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 950 rough terrain fork lift service repair manual serial no. 1483230 onwardsujfjjskekmemm
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 940 rough terrain fork lift service repair manual serial no. 1280000 onwardsujfjjskekmemm
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Clark gpx 50 e forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark gpx 40 forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark gpx 35 forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Caterpillar cat m314 f wheeled excavator (prefix fb4) service repair manual (...ujfjjskekmemm
This document provides instructions for removing and installing the rear axle on a M314F wheeled excavator. The removal procedure involves draining the axle oil, disconnecting hoses and harnesses, lifting the axle and transmission out of the machine using lifting devices, and removing the transmission bolts. The installation procedure specifies installing the rear axle in reverse order of removal. Additionally, the document provides instructions for disassembling and assembling the front axle, including removing bearing cups and cones, differential components, and installing bearings and seals. Precise measurements and ordering of parts is required to correctly assemble the front axle.
Ticagrelor and Aspirin or Aspirin alone in Acute Ischmic Stroke or TIA(THALES...Diptiman Behera
This document summarizes the results of the THALES clinical trial which compared ticagrelor plus aspirin to aspirin alone for preventing stroke in patients with minor acute ischemic stroke or high-risk transient ischemic attack (TIA). The trial found that ticagrelor plus aspirin reduced the risk of the primary outcome of stroke or death compared to aspirin alone, with rates of 5.5% vs 6.6% respectively. Rates of the secondary outcome of subsequent ischemic stroke were also lower in the ticagrelor group. Rates of disability did not differ between groups. Severe bleeding was higher with ticagrelor but intracranial hemorrhage was similar between groups. The study demonstrates
Catálogo m80,m85,m90 id e m93 id diesel explodidoJunior Iung
Este documento lista os componentes do sistema de motor, incluindo o bloco do motor, sistema de partida auxiliar, sistema de regulagem de RPM, sistema de cilindro, pistão e anéis. São listados 68 itens individuais com seus respectivos códigos e descrições.
Natriuretic peptides like BNP and NT-proBNP are important biomarkers for the diagnosis and management of congestive heart failure (CHF). BNP is released from cardiac ventricles in response to increased wall stress and levels correlate with left ventricular dysfunction. While both BNP and NT-proBNP can help diagnose CHF, NT-proBNP is more stable and its levels better predict mortality and rehospitalization risk in patients with CHF. The diagnostic accuracy of BNP and NT-proBNP can be affected by factors like renal function, obesity, and atrial fibrillation.
JCB 526S Telescopic Handler Service Repair Manual SN:1182000 Onwardsfjsekkdmmem
This is the Highly Detailed factory service repair manual for theJCB 526S TELESCOPIC HANDLER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 526S TELESCOPIC HANDLER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Care and Safety
Routine Maintenance
Attachments
Body and Framework
Electrics
Controls
Hydraulics
Transmission
Brakes
Steering
Engine
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 526S TELESCOPIC HANDLER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
El documento describe diferentes tipos de cajas registro Condulets utilizadas en sistemas de tubería conduit para facilitar la instalación y mantenimiento de conductores eléctricos. Las cajas registro están disponibles en varias series, tamaños y materiales como aluminio, fundición de hierro o feraloy, y cuentan con tapas, empaques y tornillos para proteger los conductores. Las cajas registro Condulets facilitan la instalación de conductores eléctricos en sistemas de tubería conduit y el acceso futuro para mantenimiento.
Recent advances in the management of pulmonary arterial hypertensionDr Siva subramaniyan
This document summarizes recent advances in the management of pulmonary arterial hypertension (PAH). It discusses the pathophysiology and classification of PAH and outlines treatment approaches including nonspecific supportive therapies, prostacyclin pathway drugs, endothelin receptor antagonists, phosphodiesterase-5 inhibitors, and combination therapy regimens. Non-medical therapies like atrial septostomy and lung transplantation are also reviewed. Recent research focuses on restoring BMPR-II signaling, targeting inflammation, and cell-based therapies for PAH.
Jcb dieselmax engine (sa sc build) service repair manualfujjdjjkskemme
This document is a service manual for the JCB Dieselmax mechanical engine. It contains sections on general information, care and safety, maintenance, systems descriptions, fault finding, test procedures, and information on the fuel, cooling, lubrication and electrical systems. It provides identification information for engine components, technical specifications, torque settings, recommended lubricants and capacities, service tools, repair parts and kits, lifting instructions, and starting and operating procedures.
Este documento establece los requisitos y métodos para realizar exámenes visuales. Describe que debe haber un procedimiento escrito para los exámenes visuales que incluya detalles como la técnica utilizada, preparación de superficies, equipo requerido, y documentación de resultados. También establece requisitos para el personal autorizado a realizar exámenes visuales, como una evaluación anual de la vista. Finalmente, detalla diferentes técnicas de examen visual como directa, remota y translúcida.
Takeuchi tl230 track loader parts catalogue manual (serial no. 223100001 and up)ujfjjskekmemm
This document provides parts information for a TL230 crawler excavator. It includes exploded diagrams and part lists for various assemblies of the excavator, including the undercarriage, frame, hydraulic components, and electrical system. The parts are identified by number, with corresponding part names and quantities listed. Service and remark columns are included. The document contains detailed technical specifications for maintenance and repair of the excavator.
Takeuchi tl230 track loader parts catalogue manual (serial no. 223000001 and up)ujfjjskekmemm
This document provides parts lists and diagrams for components of a TL230 excavator with serial numbers 223000001-223000110. It includes sections on track rollers, idlers, travel devices, frames, stoppers, hooks, and operation levers/stands with diagrams labeling each individual part and providing part numbers and quantities. Measurement units are provided in Japanese (mm).
Takeuchi tl230 track loader operator manual serial no. 223000859 and upujfjjskekmemm
The document provides safety instructions and guidelines for operating heavy equipment, including wearing proper protective equipment, following operating temperature limits, preventing fire hazards, and knowing emergency procedures in case of fire or other accidents. Proper maintenance is emphasized to prevent combustible debris buildup that could cause fires.
New holland 9070 l grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing CNH Industrial grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. It provides removal and installation instructions as well as specifications for servicing various components of the harvesters.
New holland 9070 grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing CNH Industrial grape harvesters. The manual is divided into sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and platform/bodywork. It provides removal and installation instructions as well as specifications for servicing various components of the harvesters.
New holland 9050 ll grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning and destemming, crop storage and unloading, accessories, tools, and platform/bodywork. It provides repair and maintenance instructions intended for qualified dealership personnel and includes safety warnings.
New holland 9050 l high grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
New holland 9050 l grape harvester service repair manualujfjjskekmemm
This service manual provides information for servicing and repairing grape harvesters including models 9050L, 9070L, 9070M, and 9090LL. The manual is divided into sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, cleaning, secondary cleaning, crop storage, accessories, tools, and bodywork. It provides detailed information on maintenance, repairs, and specifications for each system.
Jcb 950 rough terrain fork lift service repair manual serial no. 1483230 onwardsujfjjskekmemm
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Jcb 940 rough terrain fork lift service repair manual serial no. 1280000 onwardsujfjjskekmemm
This document provides information about identifying JCB machines, including identification plates, serial numbers, and certification plates. It discusses the machine identification plate and where to find the serial numbers of major components. It also outlines standard torque settings for different types of fasteners used on JCB machines.
Clark gpx 50 e forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark gpx 40 forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark gpx 35 forklift service repair manualujfjjskekmemm
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V6 engines and new truck specifications. The manual contains sections on safety, planned maintenance, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Caterpillar cat m314 f wheeled excavator (prefix fb4) service repair manual (...ujfjjskekmemm
This document provides instructions for removing and installing the rear axle on a M314F wheeled excavator. The removal procedure involves draining the axle oil, disconnecting hoses and harnesses, lifting the axle and transmission out of the machine using lifting devices, and removing the transmission bolts. The installation procedure specifies installing the rear axle in reverse order of removal. Additionally, the document provides instructions for disassembling and assembling the front axle, including removing bearing cups and cones, differential components, and installing bearings and seals. Precise measurements and ordering of parts is required to correctly assemble the front axle.
Caterpillar cat m314 f wheeled excavator (prefix f4a) service repair manual (...ujfjjskekmemm
The document provides instructions for removing the front housing on a C4.4 engine. Key steps include:
1. Removing various external components like the fan, pulley, oil pan, and gears.
2. Disconnecting electrical and coolant components from the front housing.
3. Removing several bolts of different lengths that secure the front housing to the engine block.
4. Removing the front housing and gasket from the engine block. Proper identification of removed parts is important for reinstallation.
Caterpillar cat d11 r track type tractor (prefix aaf) service repair manual (...ujfjjskekmemm
This document provides instructions for removing and installing an axle on a D11R track-type tractor. It involves the following steps:
1) Removing bolts and covers to access the axle.
2) Using lifting tools to remove the inner and outer axles, which weigh 28 kg and 48 kg respectively.
3) Reversing the process to install new axles, ensuring proper alignment and installation of seals and covers.
Caterpillar cat d11 r track type tractor (prefix 9xr) service repair manual (...ujfjjskekmemm
The document provides instructions for removing and installing various components of a Caterpillar D11R track-type tractor engine, including:
1) Removing and installing the rear power take-off by disassembling bearings and gears;
2) Removing and installing the vibration damper and pulley by removing bolts, spacers, and lifting components;
3) Removing and installing two vibration dampers, an adapter, and pulley by sliding components forward, lifting with bolts and spacers, and reinstalling.
Caterpillar cat d11 r track type tractor (prefix 9tr) service repair manual (...ujfjjskekmemm
The document provides instructions for servicing components of a Caterpillar D11R track-type tractor powered by a 3508 engine. It describes procedures for removing and assembling parts of the cylinder head and front accessory drive. The cylinder head assembly and disassembly procedures involve installing valve lifters, guides, seats and valves. The front accessory drive removal requires removing covers and bolts to detach the rear and front adapter assemblies.
The document provides instructions for installing a fuel injection pump gear on a Caterpillar 320D2 excavator. It describes:
1) Ensuring the number one piston is at top dead center and locking the crankshaft and camshaft with tools.
2) Installing the fuel pump gear on the fuel injection pump shaft while aligning timing marks.
3) Tightening the nut on the fuel injection pump shaft and unlocking the fuel injection pump.
Caterpillar cat 305 e mini hydraulic excavator (prefix xsc) service repair ma...ujfjjskekmemm
The document provides instructions for disassembling the final drive and travel motor of a 305E Mini Hydraulic Excavator. It lists the required tools and gives 33 steps to remove components like gears, seals, springs, pins and bearings. Personal safety warnings are included to release spring pressures carefully. Dismantling allows inspection and replacement of parts for repair.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. 1-1
MAINTENANCE SAFETY
Never service the Doosan
Excavator without instructions.
Have good ventilation when
welding or grinding painted parts.
Wear dust mask when grinding
painted parts. Toxic dust and gas
can be produced.
Stop, cool and clean engine of
flammable materials before
checking fluids.
Never service or adjust machine
with the engine running unless
instructed to do so in the
manual.
Avoid contact with leaking
hydraulic fluid or diesel fuel
under pressure. It can penetrate
the skin or eyes.
Never fill fuel tank with engine
running, while smoking, or when
near open flame.
Always lower the bucket and
blade to the ground before doing
any maintenance.
Never modify equipment or add
attachments not approved by
Doosan Company.
Keep body, jewelry and clothing
away from moving parts, electrical
contact, hot parts and exhaust.
Wear eye protection to guard from
battery acid, compressed springs,
fluids under pressure and flying
debris when engines are running
or tools are used. Use eye
protections approved for type of
welding.
Keep tailgate closed except for
service. Close and latch tailgate
before operating the excavator.
Vent exhaust to outside when
engine must be run for service.
Exhaust system must be tightly
sealed. Exhaust fumes can kill
without warning.
Cleaning and maintenance are
required daily.
MSW28-0409
Use the correct procedure to lift
and support the excavator.
Lead-acid batteries produce
flammable and explosive gases.
Keep arcs, sparks, flames and
lighted tobacco away from
batteries.
Batteries contain acid which
burns eyes or skin on contact.
Wear protective clothing. If acid
contacts body, flush well with
water. For eye contact flush well
and get immediate medical
attention.
WARNING
Instructions are necessary before operating or servicing machine. Read and
understand the Operation & Maintenance Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals
when making repairs, adjustments or servicing. Check for correct function after
adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death. W-2003-0807
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/
operator without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance
Manual must be performed ONLY BY QUALIFIED DOOSAN SERVICE PERSONNEL. Always use genuine Doosan
replacement parts. The Service Safety Training Course is available from your Doosan dealer.
Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is
involved!” Carefully read the message that follows.
P-90216
CORRECT
B-19964
CORRECT CORRECT
B-19959
B-19965
WRONG WRONG
B-19960 B-19966
WRONG
WRONG
B-19962 B-19958
WRONG
B-19798
WRONG
5. 1-7 DX19 Service Manual
FOREWORD
This manual is for the Doosan excavator mechanic. It provides necessary servicing and adjustment
procedures for the Doosan excavator and its component parts and systems. Refer to the Operation &
Maintenance Manual for operating instructions, starting procedure, daily checks, etc.
A general inspection of the following items must be made after the excavator has had service or repair:
FW EXC-0509 SM
1. Check that the ROPS/TOPS/
FOPS is in good condition
and is not modified.
9. Safety treads must be in good
condition.
2. Check that ROPS/TOPS
mounting hardware is
tightened and is Doosan
approved.
10. Check for correct function of
indicator lamps.
3. The seat belt must be
correctly installed, functional
and in good condition.
11. Check hydraulic fluid level,
engine oil level and fuel
supply.
4. Machine signs (decals) must
be legible and in the correct
location.
12. Inspect for fuel, oil or
hydraulic fluid leaks.
5. Travel levers, control levers
and foot pedals must return to
neutral. Check that the pedal
locks are in working order.
13. Lubricate the excavator.
6. Check for correct function of
the work lights.
14. Check the condition of the
battery and cables.
7. Enclosure door latches must
open and close freely.
15. Inspect the air cleaner for
damage or leaks. Check the
condition of the element.
8. Attachment locking pins must
function correctly and be in
good condition.
16. Check the electrical charging
system.
6. 1-8 DX19 Service Manual
FW EXC-0509 SM
17. Check tracks for wear and
tension. Use only approved
tracks.
21. Check the control console
interlocks for correct function.
18. Inspect for loose or broken
parts or connections.
22. Inspect the X-Change™ for
wear or damage. Repair or
replace damaged parts.
19. Check for any field
modification not completed.
23. Check function or condition of
all equipped options and
accessories (examples:
special applications kit,
motion alarm, etc.).
20. Operate the machine and
check all functions.
24. Recommend to the owner
that all necessary corrections
be made before the machine
is returned to service.
7. 1-9 DX19 Service Manual
SAFETY INSTRUCTIONS
WARNING
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
IMPORTANT
This notice identifies procedures which must be
followed to avoid damage to the machine.
I-2019-0284
DANGER
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
D-1002-1107
WARNING
The signal word WARNING on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
W-2044-1107
The following publications provide information on the
safe use and maintenance of the Doosan machine and
attachments:
• The Delivery Report is used to assure that complete
instructions have been given to the new owner and
that the machine is in safe operating condition.
• The Operation & Maintenance Manual delivered with
the machine or attachment contains operating
information as well as routine maintenance and
service procedures. It is a part of the machine and can
be stored in a container provided on the machine.
Replacement Operation & Maintenance Manuals can
be ordered from your Doosan dealer.
• Machine signs (decals) instruct on the safe operation
and care of your Doosan machine or attachment. The
signs and their locations are shown in the Operation
& Maintenance Manual. Replacement signs are
available from your Doosan dealer.
• An Operator’s Handbook fastened to the operator
cab. It’s brief instructions are convenient to the
operator. The handbook is available from your dealer
in an English edition or one of many other languages.
See your Doosan dealer for more information on
translated versions.
• The Service Manual and Parts Manual are available
from your dealer for use by mechanics to do shop-
type service and repair work.
The dealer and owner / operator review the
recommended uses of the product when delivered. If the
owner / operator will be using the machine for a different
application(s) he or she must ask the dealer for
recommendations on the new use.
Avoid Silica Dust
Cutting or drilling concrete containing sand or rock
containing quartz may result in exposure to silica dust.
Use a respirator, water spray or other means to control
dust.
SI EXC EMEA-1114 SM
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
8. 1-10 DX19 Service Manual
FIRE PREVENTION
Maintenance
The machine and some attachments have components
that are at high temperatures under normal operating
conditions. The primary source of high temperatures is
the engine and exhaust system. The electrical system, if
damaged or incorrectly maintained, can be a source of
arcs or sparks.
Flammable debris (leaves, straw, etc.) must be removed
regularly. If flammable debris is allowed to accumulate, it
can cause a fire hazard. Clean often to avoid this
accumulation. Flammable debris in the engine
compartment is a potential fire hazard.
The operator’s area, engine compartment and engine
cooling system must be inspected every day and cleaned
if necessary to prevent fire hazards and overheating.
All fuels, most lubricants and some coolants mixtures are
flammable. Flammable fluids that are leaking or spilled
onto hot surfaces or onto electrical components can
cause a fire.
Operation
Do not use the machine where exhaust, arcs, sparks or
hot components can contact flammable material,
explosive dust or gases.
Electrical
Check all electrical wiring and connections for damage.
Keep the battery terminals clean and tight. Repair or
replace any damaged part or wires that are loose or
frayed.
Battery gas can explode and cause serious injury. Use
the procedure in the Operation & Maintenance Manual
for connecting the battery and for jump starting. Do not
jump start or charge a frozen or damaged battery. Keep
any open flames or sparks away from batteries. Do not
smoke in battery charging area.
Hydraulic System
Check hydraulic tubes, hoses and fittings for damage
and leakage. Never use open flame or bare skin to check
for leaks. Hydraulic tubes and hoses must be properly
routed and have adequate support and secure clamps.
Tighten or replace any parts that show leakage.
Always clean fluid spills. Do not use petrol or diesel fuel
for cleaning parts. Use commercial nonflammable
solvents.
Fueling
Stop the engine and let it cool before adding fuel. No
smoking! Do not refuel a machine near open flames or
sparks. Fill the fuel tank outdoors.
Ultra Low Sulfur Diesel (ULSD) poses a greater static
ignition hazard than earlier diesel formulations with
higher Sulfur content. Avoid death or serious injury from
fire or explosion. Consult with your fuel or fuel system
supplier to ensure the delivery system is in compliance
with fueling standards for proper grounding and bonding
practices.
Starting
Do not use ether or starting fluids on any engine that has
glow plugs or air intake heater. These starting aids can
cause explosion and injure you or bystanders.
Use the procedure in the Operation & Maintenance
Manual for connecting the battery and for jump starting.
Spark Arrester Exhaust System
The spark arrester exhaust system is designed to control
the emission of hot particles from the engine and exhaust
system, but the muffler and the exhaust gases are still
hot.
Check the spark arrester exhaust system regularly to
make sure it is maintained and working properly. Use the
procedure in the Operation & Maintenance Manual for
cleaning the spark arrester muffler (if equipped).
SI EXC EMEA-1114 SM
9. 1-11 DX19 Service Manual
FIRE PREVENTION (CONT’D)
Welding And Grinding
Always clean the machine and attachment, disconnect
the battery, and disconnect the wiring from the Doosan
controllers before welding. Cover rubber hoses, battery
and all other flammable parts. Keep a fire extinguisher
near the machine when welding.
Have good ventilation when grinding or welding painted
parts. Wear dust mask when grinding painted parts.
Toxic dust or gas can be produced.
Dust generated from repairing nonmetallic parts such as
hoods, fenders or covers can be flammable or explosive.
Repair such components in a well ventilated area away
from open flames or sparks.
Fire Extinguishers
Know where fire extinguishers and first aid kits are
located and how to use them. Inspect the fire
extinguisher and service the fire extinguisher regularly.
Obey the recommendations on the instructions plate.
SI EXC EMEA-1114 SM
10. 1-12 DX19 Service Manual
SERIAL NUMBER LOCATIONS
Always use the serial number of the excavator when
requesting service information or when ordering parts.
Early or later models (identification made by serial
number) may use different parts, or it may be necessary
to use a different procedure in doing a specific service
operation.
Excavator Serial Number
Figure 1
The excavator serial number plate (Item 1) [Figure 1] is
located on the frame of the machine in the location
shown.
Figure 2
Explanation of excavator Serial Number [Figure 2]:
Module 1: the first four digits identify the manufacturing
location
Module 2: the next five digits identify the model
production code.
Module 3: the next digit give random check number.
Module 4: the last part of digit give production sequence
number
Engine Serial Number
Figure 3
The engine serial number is located on the top cover
(Item 1) or on the side of the engine block (Item 2)
[Figure 3] above the fuel pump.
P113376
1
P-90175Module 4: serial number
Module 3: check digit
Module 2: model production code
Module 1: manufacturing location
P113547
1
P113543
2
11. 1-13 DX19 Service Manual
EXCAVATOR IDENTIFICATION
[A] BUCKET - Several different buckets and other attachments are available for the Doosan excavator.
[B] ROPS, TOPS - (Roll-Over Protective Structure / Tip-Over Protective Structure) as standard equipment.
The ROPS / TOPS meets ISO 12117-2 AND ISO 12117.
ITEM DESCRIPTION ITEM DESCRIPTION
1 Operator’s Handbook (optional) 15 Cab / Canopy (ROPS / TOPS) [B]
2 Arm Cylinder 16 Rear Cover
3 Auxiliary Quick Couplers 17 Counterweight
4 Boom 18 Tracks
5 Arm 19 Tie Downs (Both Sides)
6 Bucket Cylinder 20 Track Frames
7 Bucket Link / Attachment Coupler (If Equipped) 21 Blade
8 Bucket [A] 22 Right Side Cover
9 Boom Cylinder 23 Lift Point
10 Tie Downs / Lift Points
11 Blade Cylinder
12 Upperstructure
13 Control Levers (Joysticks)
14 Operator’s Seat with Seat Belt
NA9366
NA9367
23
9
4
6
5
7
8
15
16
14
13
20
1918
17
22
1
2
12
3
11
10
19
21
15. 10-10-1 DX19 Shop Manual
LIFTING AND BLOCKING THE EXCAVATOR
Procedure
Always park the machine on a level surface.
WARNING
AVOID INJURY OR DEATH
Instructions are necessary before operating or
servicing machine. Read and understand the
Operation & Maintenance Manual, Operator’s
Handbook and signs (decals) on machine. Follow
warnings and instructions in the manuals when
making repairs, adjustments or servicing. Check for
correct function after adjustments, repairs or
service. Untrained operators and failure to follow
instructions can cause injury or death.
W-2003-0807
WARNING
Put jackstands under the blade and rear corners of
the undercarriage before working under the machine.
Failure to block up the machine may allow it to move
or fall and result in injury or death.
W-2218-1195
Figure 10-10-1
Figure 10-10-2
Raise one side of the machine (approximately 101,6 mm
(4 in)) using the boom and arm [Figure 10-10-1] and
[Figure 10-10-2].
Raise the blade fully and install jack stands under the
blade and track frame (Item 1) [Figure 10-10-1] and
[Figure 10-10-2]. Raise the boom until all machine
weight is on the jack stands.
Repeat the procedure for the other side.
Stop the engine.
P113459
1
P113460
1
16. 10-20-1 DX19 Shop Manual
LIFTING THE EXCAVATOR
Procedure
Figure 10-20-1
Fully extend the cylinders of the bucket, arm, and boom
so that the excavator is in the position as shown [Figure
10-20-1].
Raise the blade all the way.
Put all the control levers in neutral.
WARNING
AVOID INJURY OR DEATH
• Use chains and lifting equipment with sufficient
capacity for the weight of the excavator plus any
added attachments.
• Maintain center of gravity and balance when
lifting.
• Do not swing boom or upperstructure.
• Never lift with operator on machine.
• Never lift with the blade angled (if equipped).
W-2800-0709
Figure 10-20-2
Figure 10-20-3
Fasten chains to the ends of the blade (Item 1) [Figure
10-20-1] and [Figure 10-20-2] and up to a lifting fixture
above the canopy / cab. The lifting fixture must extend
over the sides of the canopy / cab to prevent the chains
from hitting the ROPS / TOPS.
Fasten a chain (Item 1) [Figure 10-20-3] from the rod to
the lift fixture.
NOTE: Depending on the type of chain hooks, it may
be necessary to install a clevis at the lift
points and then hook to the clevis.
P113577
1
P113424
1
1
P113425
1
17. 10-30-1 DX19 Shop Manual
OPERATOR CAB (ROPS / TOPS)
Description
The Doosan excavator has an optional operator cab
(ROPS / TOPS) as standard equipment to protect the
operator if the excavator is tipped over. The seat belt
must be worn for ROPS / TOPS protection.
Check the ROPS / TOPS cab, mounting, and hardware
for damage. Never modify the ROPS / TOPS cab.
Replace the cab and hardware if damaged.
ROPS / TOPS - Roll-Over Protective Structure per ISO
12117-2, and Tip-Over Protective Structure per ISO
12117.
WARNING
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat Company. Changes to
the cab can cause loss of operator protection from
rollover and falling objects, and result in injury or
death.
W-2069-0200
OPERATOR CAB (ROPS / TOPS) (CONT’D)
Cab Door
Figure 10-30-1
The cab door can be locked (Item 1) [Figure 10-30-1]
with the same key as the starter switch. Pull on the latch
to open the door.
Figure 10-30-2
Push the door all the way open until the latch post (Item
1) engages in the latch (Item 2) [Figure 10-30-2] to hold
the door in the open position.
P113387
1
P113388
1 2
18. 10-30-2 DX19 Shop Manual
Figure 10-30-3
When the door is in the open position, push on the latch
(Item 1) [Figure 10-30-3] and close the door.
Figure 10-30-4
From inside the cab, push on the latch (Item 1) [Figure
10-30-4] and close the door.
Figure 10-30-5
From inside the cab, to open the door, pull on the latch
(Item 1) [Figure 10-30-5] and open the door.
OPERATOR CAB (ROPS / TOPS) (CONT’D)
Front Window
Opening The Front Window
Figure 10-30-6
Press the window latch button (Item 1) [Figure 10-30-6]
(both sides).
Figure 10-30-7
Use both window grab handles (Item 1) [Figure 10-30-7]
to pull the top of the window in.
Continue moving the window in and up over the
operator’s head until the window is fully raised.
P113389
1
P113390
1
P113391
1
P113392
1
P113393
1
19. 10-30-3 DX19 Shop Manual
Figure 10-30-8
When the window is fully raised, the latch (Item 1)
[Figure 10-30-8] (both sides) will close on the bracket in
the latched position.
Pull down and forward slightly on the window to make
sure it is fully latched.
Closing The Front Window
Use both window grab handles to support the window
while pressing the window latch button (Item 2) [Figure
10-30-8] (both sides).
Use both window grab handles (Item 1) [Figure 10-30-7]
to pull the window down fully.
Press the top of the window in until the latch locks into
the latched position (both sides) [Figure 10-30-6].
Pull inward and upward slightly on the window to make
sure it is fully latched in the closed position.
OPERATOR CAB (ROPS / TOPS) (CONT’D)
Front Wiper
Figure 10-30-9
The front window is equipped with a wiper (Item 1)
[Figure 10-30-9] and washer.
P113394
1
2
P113395
1
20. 10-30-4 DX19 Shop Manual
Window Washer Reservoir
Figure 10-30-10
The window washer reservoir (Item 1) [Figure 10-30-10]
is located on the right side cover.
NOTE: When temperatures are to reach below
freezing, use a washer fluid that is
recommended for use in cold temperatures to
avoid damage to the washer reservoir.
OPERATOR CAB (ROPS / TOPS) (CONT’D)
Right Side Window
Opening The Right Front Window
Figure 10-30-11
Press down on the latch (Item 1) [Figure 10-30-11]
located at the front of the front window.
Figure 10-30-12
Pull the latch (Item 1) [Figure 10-30-12] backward to
open the window until the desired stop. Release the latch
and latch the window in place.
Closing The Right Front Window
Press down on the latch (Item 1) [Figure 10-30-11] and
push the latch forward to close the window.
P113570
1
P113397
1
P113398
1
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 10-30-5 DX19 Shop Manual
Heating And Ventilation Ducting
Figure 10-30-13
The heating and ventilation louvers (Item 1) [Figure 10-
30-13] can be positioned as needed to direct the air flow
to various areas in the cab.
P113381
1
1
23. 10-31-1 DX19 Shop Manual
OPERATOR CANOPY (ROPS / TOPS)
Description
The Doosan excavator has an operator canopy (ROPS /
TOPS) as standard equipment to protect the operator if
the excavator is tipped over. The seat belt must be worn
for ROPS / TOPS protection.
Check the ROPS / TOPS canopy, mounting, and
hardware for damage. Never modify the ROPS / TOPS
canopy. Replace the canopy and hardware if damaged.
ROPS / TOPS - Roll-Over Protective Structure per ISO
12117-2, and Tip-Over Protective Structure per ISO
12117.
WARNING
Never modify operator cab by welding, grinding,
drilling holes or adding attachments unless
instructed to do so by Bobcat Company. Changes to
the cab can cause loss of operator protection from
rollover and falling objects, and result in injury or
death.
W-2069-0200
24. 10-40-1 DX19 Shop Manual
TRANSPORTING THE EXCAVATOR ON A TRAILER
Loading And Unloading
When transporting the machine, observe the rules, motor
vehicle laws, and vehicle limit ordinances. Use a
transport and towing vehicle of adequate length and
capacity.
Secure the parking brakes and block the wheels of the
transport vehicle.
Align the ramps with the center of the transport vehicle.
Secure the ramps to the truck bed and be sure ramp
angle does not exceed 15 degrees.
Use metal loading ramps with a slip resistant surface.
Use ramps that are the correct length and width and can
support the weight of the machine.
The rear of the trailer must be blocked or supported when
loading or unloading the machine to prevent the front of
the transport vehicle from raising.
Determine the direction of the track movement before
moving the machine (blade forward).
Disengage the auto idle feature and move the two speed
travel to the low range position.
Figure 10-40-1
Move the machine forward onto the transport vehicle
[Figure 10-40-1].
Do not change direction of the machine while it is on the
ramps.
Lower the boom, arm, bucket, and blade to the transport
vehicle.
Stop the engine and remove the key (if equipped).
Put blocks at the front and rear of the tracks.
Fastening
Figure 10-40-2
Figure 10-40-3
Fasten chains to the front corners of the blade (Item 1)
[Figure 10-40-2] (or the front corner of the
upperstructure) and to the tie down loop at both sides of
the track frame (Item 1) [Figure 10-40-3] (or the tie down
on the rear of the upperstructure) to prevent it from
moving when going up or down slopes or during sudden
stops.
Use chain binders to tighten the chains and then safely tie
the chain binder levers to prevent loosening.
WARNING
AVOID SERIOUS INJURY OR DEATH
Adequately designed ramps of sufficient strength are
needed to support the weight of the machine when
loading onto a transport vehicle. Wood ramps can
break and cause personal injury.
W-2058-0807
P113426B
P113429
1
1
1
P113428
1
1