CZY-G is based on the balling method, and the primary adhesive property of adhesive tapes could be obtained by observing adhesive effect occurred immediately after rolling ball and adhesive specimen come into contact.
The PARAM® CZY-G Primary Adhesive Tester uses the rolling ball method to test the instant adhesive properties of specimens by observing the adhesive effect when steel balls contact adhesive tapes. It conforms to Chinese and Japanese standards. The instrument can adjust its angle of inclination to meet test requirements and determines the primary adhesive properties of various adhesives like tapes, patches, and films. It has a testable area width of 80mm and can test steel balls ranging from 1/32 inch to 1 inch in size.
maqterial science.. various NDT inspectuion of matarials
by
Engr Mahmud Hasan
Assistant proffessor
Shahjalal University of Science & technology
Bangladesh
i-Strentek 1200 Auto Tensile Tester is designed to determine the tensile, peeling, tearing, heat sealing, adhesive, piercing, opening, low speed unwrapping and pulling force of the plastic film, composite material, flexible packaging material, plastic tube, adhesives, adhesive tapes, medical plasters, release paper, protective films, combination caps, aluminum foils, diaphragm, back sheets, non-woven fabrics, rubber and paper etc.
MXD-01A Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
This document provides information about Best Technology Co., Ltd., including:
- The company was established in 2006 and is located in Shenzhen, China, specializing in metal dome arrays and die cutting.
- It has over 100 employees and 3000 square meters of factory space, with ISO certifications for quality management.
- The company offers a variety of metal dome array and die cutting products and services for industries like mobile phones and electronics.
- It describes the production process and quality control procedures to ensure high quality products and customer satisfaction.
MXD-01 Coefficient of Friction Tester can be used for static and kinetic coefficient of friction tests to plastic films, sheets, rubber, paper, PP woven bags, fabric (fabric styles test), metal-plastic composite strip/belt for communication cable, conveyor belt, wood, coating, brake pads, windshield wiper, shoe material, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
Shanghai DaLong Special Steel Tube Co., Ltd. is located in Shanghai and produces various stainless steel, duplex steel, nickel alloy, and titanium alloy seamless pipes and fittings. It has a large production facility with advanced equipment and provides products for various industries. DaLong has certifications for quality management and pressure equipment and exports products internationally known for quality and timely delivery.
Leghe Leggere Lavorate is an Italian contract manufacturer specializing in medical device manufacturing. They offer integrated capabilities from design and development through validation, production, packaging, and logistics. Their facilities include CNC machining centers, injection molding machines, and finishing departments. They produce a range of orthopedic and dental implants and instruments from biomaterials like titanium alloys, stainless steel, and polymers. Leghe Leggere Lavorate aims to exceed customer expectations while reducing costs through quality management systems and eco-friendly practices.
The PARAM® CZY-G Primary Adhesive Tester uses the rolling ball method to test the instant adhesive properties of specimens by observing the adhesive effect when steel balls contact adhesive tapes. It conforms to Chinese and Japanese standards. The instrument can adjust its angle of inclination to meet test requirements and determines the primary adhesive properties of various adhesives like tapes, patches, and films. It has a testable area width of 80mm and can test steel balls ranging from 1/32 inch to 1 inch in size.
maqterial science.. various NDT inspectuion of matarials
by
Engr Mahmud Hasan
Assistant proffessor
Shahjalal University of Science & technology
Bangladesh
i-Strentek 1200 Auto Tensile Tester is designed to determine the tensile, peeling, tearing, heat sealing, adhesive, piercing, opening, low speed unwrapping and pulling force of the plastic film, composite material, flexible packaging material, plastic tube, adhesives, adhesive tapes, medical plasters, release paper, protective films, combination caps, aluminum foils, diaphragm, back sheets, non-woven fabrics, rubber and paper etc.
MXD-01A Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
This document provides information about Best Technology Co., Ltd., including:
- The company was established in 2006 and is located in Shenzhen, China, specializing in metal dome arrays and die cutting.
- It has over 100 employees and 3000 square meters of factory space, with ISO certifications for quality management.
- The company offers a variety of metal dome array and die cutting products and services for industries like mobile phones and electronics.
- It describes the production process and quality control procedures to ensure high quality products and customer satisfaction.
MXD-01 Coefficient of Friction Tester can be used for static and kinetic coefficient of friction tests to plastic films, sheets, rubber, paper, PP woven bags, fabric (fabric styles test), metal-plastic composite strip/belt for communication cable, conveyor belt, wood, coating, brake pads, windshield wiper, shoe material, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.
Shanghai DaLong Special Steel Tube Co., Ltd. is located in Shanghai and produces various stainless steel, duplex steel, nickel alloy, and titanium alloy seamless pipes and fittings. It has a large production facility with advanced equipment and provides products for various industries. DaLong has certifications for quality management and pressure equipment and exports products internationally known for quality and timely delivery.
Leghe Leggere Lavorate is an Italian contract manufacturer specializing in medical device manufacturing. They offer integrated capabilities from design and development through validation, production, packaging, and logistics. Their facilities include CNC machining centers, injection molding machines, and finishing departments. They produce a range of orthopedic and dental implants and instruments from biomaterials like titanium alloys, stainless steel, and polymers. Leghe Leggere Lavorate aims to exceed customer expectations while reducing costs through quality management systems and eco-friendly practices.
This document contains the resume of Karin Simonsen, who has over 10 years of experience in non-destructive testing including radiography, ultrasonic testing, magnetic particle inspection, and penetrant testing. She has worked as a Level II Technician for Mistras Group and Team Industrial Services, and also has experience as a teacher for safety management and special education. Her education includes a Bachelor's degree in Exceptional Child Education from Jacksonville University and training in non-destructive testing and commercial diving.
Due to their optimised micrometre-accurate precision grinding, FEATHER surgical scalpels offer outstanding quality and performance. The double-honing process ensures ultra-sharp cutting edges of superb durability. The standard surgical instrument portfolio includes; standard, mini and long scalpels, safety scalpels, a variety of surgical blades & handles and a blade plier & remover.
SML Engineering Inc. provides precision CNC machining services for industries including aerospace, medical, and automotive. They have extensive machining capabilities and certifications to aerospace standards, and produce complex parts from various materials with tight tolerances and assemblies. SML aims to be a trusted source for critical quality precision machining applications through their experienced team and wide range of equipment and processes.
Material identification and verification of metals and alloys is critical for safety, performance, and liability reasons. Traditional metallurgical analysis methods like melting parts are complex and time-consuming, so most machine shops guess materials. Precision Products invested in X-Ray fluorescence equipment to non-destructively test metals and alloys in seconds and determine exact compositions, ensuring parts are correct and minimizing customer risk and liability while ensuring performance. The portable XRF device also tests incoming raw materials to identify any mislabeling which could be disastrous depending on the part's application.
This document discusses different types of inspections used during the manufacturing process. It outlines floor inspection, fixed inspection, key point inspection, and final inspection. It then describes various inspection methods like visual testing, liquid penetrant testing, magnetic particle testing, ultrasonic testing, and radiographic testing. The objective of inspection is to check that a component works as intended, check the acceptability of manufactured products, and measure quality against predetermined standards. Inspection helps reduce defects, eliminate defective components, and ensure product quality.
Leghe Leggere Lavorate is an Italian contract manufacturer specializing in precision turned metal parts for the medical device industry since 1951. They offer integrated manufacturing services from design and development through validation, production, packaging, and logistics. Their capabilities include CNC machining, finishing, cleaning rooms, and packaging sterilized products. They produce parts from various biocompatible materials for applications in orthopedics, spine, dental, and more. Sustainability is also important to them as they work to reduce environmental impact.
The TABER Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping,
engraving and other similar physical damage not classified as ordinary wear.
Vetorix Engineering is an Italian company specialized in advanced non-destructive inspection (NDI) of metallic and composite materials. It emerged from an independent research program in 2003 to transfer NDI technology from metals to composites. The company has a team of expertise technicians and provides reliable NDI solutions using latest technologies for industries like aeronautics, automotive, and marine. It aims to accurately evaluate materials and structures to assess defects and ensure integrity through customized leading-edge NDI methods and systems.
Presentation on Technique of Engin Inspection(1)Ferdous Kabir
This presentation summarizes techniques for inspecting engines, including dye penetrant testing and magnetic particle testing. Dye penetrant testing uses cleaner, penetrant, and developer liquids to detect surface cracks. Magnetic particle testing detects cracks by magnetizing an area and observing iron particles clustering at defects. It can find surface and subsurface defects in ferromagnetic metals like iron and is commonly used to detect welding flaws. The presentation demonstrates these methods and shows examples of defects found during engine inspections.
180 Degree Peel Tests on Syringe Blister PacksAMETEK STC
The document discusses performing a 180 degree peel test on syringe blister packs using a motorized force tester to verify the integrity of the packaging. The proper grips and testing procedure are important to get accurate results. A self-tightening wedge grip with serrated faces is recommended to prevent premature failure and ensure the small tabs are centered during testing. The tester provides load and displacement data during the peel to measure the maximum adhesion force.
The BLJ-02 Disk Stripping Tester is used to test the ink fastness of printed plastic films and glass paper decorating materials made using intaglio printing. It can also test the adhesion of vacuum coated surfaces. The instrument strips adhesive tape applied to printed surfaces at controlled pressure and speed to observe ink peeling. It conforms to national and international standards for testing ink fastness. The instrument is computer controlled with an LCD interface and alerts users when tests are complete.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 Disk Stripping Tester is professionally used to test ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could also be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination.
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
The YGJ-02 is a device for testing ink fastness on printed materials like plastic films and glass paper. It determines adhesion by rolling an adhesive tape under a specified load and speed and then peeling it to observe ink removal. The YGJ-02 can test adhesion of surface coatings and follows standards like GB/T 7707. It is controlled by a microcomputer and is useful for testing adhesives and other applications.
HTT-L1 is designed for hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
This document contains the resume of Karin Simonsen, who has over 10 years of experience in non-destructive testing including radiography, ultrasonic testing, magnetic particle inspection, and penetrant testing. She has worked as a Level II Technician for Mistras Group and Team Industrial Services, and also has experience as a teacher for safety management and special education. Her education includes a Bachelor's degree in Exceptional Child Education from Jacksonville University and training in non-destructive testing and commercial diving.
Due to their optimised micrometre-accurate precision grinding, FEATHER surgical scalpels offer outstanding quality and performance. The double-honing process ensures ultra-sharp cutting edges of superb durability. The standard surgical instrument portfolio includes; standard, mini and long scalpels, safety scalpels, a variety of surgical blades & handles and a blade plier & remover.
SML Engineering Inc. provides precision CNC machining services for industries including aerospace, medical, and automotive. They have extensive machining capabilities and certifications to aerospace standards, and produce complex parts from various materials with tight tolerances and assemblies. SML aims to be a trusted source for critical quality precision machining applications through their experienced team and wide range of equipment and processes.
Material identification and verification of metals and alloys is critical for safety, performance, and liability reasons. Traditional metallurgical analysis methods like melting parts are complex and time-consuming, so most machine shops guess materials. Precision Products invested in X-Ray fluorescence equipment to non-destructively test metals and alloys in seconds and determine exact compositions, ensuring parts are correct and minimizing customer risk and liability while ensuring performance. The portable XRF device also tests incoming raw materials to identify any mislabeling which could be disastrous depending on the part's application.
This document discusses different types of inspections used during the manufacturing process. It outlines floor inspection, fixed inspection, key point inspection, and final inspection. It then describes various inspection methods like visual testing, liquid penetrant testing, magnetic particle testing, ultrasonic testing, and radiographic testing. The objective of inspection is to check that a component works as intended, check the acceptability of manufactured products, and measure quality against predetermined standards. Inspection helps reduce defects, eliminate defective components, and ensure product quality.
Leghe Leggere Lavorate is an Italian contract manufacturer specializing in precision turned metal parts for the medical device industry since 1951. They offer integrated manufacturing services from design and development through validation, production, packaging, and logistics. Their capabilities include CNC machining, finishing, cleaning rooms, and packaging sterilized products. They produce parts from various biocompatible materials for applications in orthopedics, spine, dental, and more. Sustainability is also important to them as they work to reduce environmental impact.
The TABER Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping,
engraving and other similar physical damage not classified as ordinary wear.
Vetorix Engineering is an Italian company specialized in advanced non-destructive inspection (NDI) of metallic and composite materials. It emerged from an independent research program in 2003 to transfer NDI technology from metals to composites. The company has a team of expertise technicians and provides reliable NDI solutions using latest technologies for industries like aeronautics, automotive, and marine. It aims to accurately evaluate materials and structures to assess defects and ensure integrity through customized leading-edge NDI methods and systems.
Presentation on Technique of Engin Inspection(1)Ferdous Kabir
This presentation summarizes techniques for inspecting engines, including dye penetrant testing and magnetic particle testing. Dye penetrant testing uses cleaner, penetrant, and developer liquids to detect surface cracks. Magnetic particle testing detects cracks by magnetizing an area and observing iron particles clustering at defects. It can find surface and subsurface defects in ferromagnetic metals like iron and is commonly used to detect welding flaws. The presentation demonstrates these methods and shows examples of defects found during engine inspections.
180 Degree Peel Tests on Syringe Blister PacksAMETEK STC
The document discusses performing a 180 degree peel test on syringe blister packs using a motorized force tester to verify the integrity of the packaging. The proper grips and testing procedure are important to get accurate results. A self-tightening wedge grip with serrated faces is recommended to prevent premature failure and ensure the small tabs are centered during testing. The tester provides load and displacement data during the peel to measure the maximum adhesion force.
The BLJ-02 Disk Stripping Tester is used to test the ink fastness of printed plastic films and glass paper decorating materials made using intaglio printing. It can also test the adhesion of vacuum coated surfaces. The instrument strips adhesive tape applied to printed surfaces at controlled pressure and speed to observe ink peeling. It conforms to national and international standards for testing ink fastness. The instrument is computer controlled with an LCD interface and alerts users when tests are complete.
BLJ-02 is designed for the determination of ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
BLJ-02 Disk Stripping Tester is professionally used to test ink fastness of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It could also be used to test adhesion condition of surface layers formed by the techniques of vacuum coating, surface coating and lamination.
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
The YGJ-02 is a device for testing ink fastness on printed materials like plastic films and glass paper. It determines adhesion by rolling an adhesive tape under a specified load and speed and then peeling it to observe ink removal. The YGJ-02 can test adhesion of surface coatings and follows standards like GB/T 7707. It is controlled by a microcomputer and is useful for testing adhesives and other applications.
HTT-L1 is designed for hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
VAC-V1 is applicable to the determination of gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, sheeting, foils and finished packages, etc.
BLJ-02 Disk Stripping Tester is professionally applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coated films, surface coating and composite.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
LSSD-01 is designed for leak detection and seal strength test, including creep test and burst test in one instrument. It can be used for measurement of heat seal edge of flexible packages that are made by heat seal and adhesive processing.
CHY-CA is based on mechanical contacting method and applicable to thickness test for plastic films, sheets,paper, foils and other materials within specified range. CHY-CA has auto sampling mechanism.
Similar to CZY-G Rolling Ball Tack Tester for Adhesives (20)
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
1. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85812140
www.labthinkinter n atio n al.com.cn
Professional Technology
Based on the rolling ball method and test instant adhesive property of specimens
Testing steel balls are designed strictly according to national standards, which ensure the accuracy of test data
Angle of inclination could be adjusted freely to meet customer test requirements
Test Principle
The instrument is designed based on the balling method, and primary adhesive property of tapes could be obtained by observing adhesive effect occurred immediately after rolling ball and adhesive specimen come into contact.
This test instrument conforms to the standards: GB/T 4852, JIS Z0237
Applications
CZY-G is professionally applicable to the determination of primary adhesive property of:
Basic Applications
Adhesives
Including various adhesives, e.g. pressure-sensitive tapes, medical patches, adhesive labels, and protection films
Technical Specifications
Items
Specifications
Angle Range
0 ~ 60°
Panel Width
120 mm
Testable Area Width
80 mm
Standard Steel Ball
1/32 inch ~ 1 inch
Instrument Dimension
320 mm (L) x140 mm (W) x 180 mm (H)
Net Weight
6 kg
Please Note: Labthink is always dedicated to the innovation and improvement of product performance function. Therefore, technical specifications are subject to change without further notice. Please visit our website at www.labthinkinternational.com.cn for the latest updates. Labthink reserves rights of final interpretation and revision.
CZY-G Primary Adhesive Tester
PARAM®