CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
The YGJ-02 is a device for testing ink fastness on printed materials like plastic films and glass paper. It determines adhesion by rolling an adhesive tape under a specified load and speed and then peeling it to observe ink removal. The YGJ-02 can test adhesion of surface coatings and follows standards like GB/T 7707. It is controlled by a microcomputer and is useful for testing adhesives and other applications.
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
Labthink Instruments Co., Ltd. produces a falling dart impact tester that can automatically test specimens using one of two methods (A or B) and determine impact resistance. The tester uses electromagnetic suspension and automatic release of the falling dart to reduce errors from manual operation. It has pneumatic clamping, dual start modes, and an observation light for user convenience. Test results are displayed and data can be exported via the included printer or Lab Data Sharing System software. The falling dart impact tester conforms to various international standards and can test properties like impact resistance of films, paper, aluminum, and composites.
This document provides information on an abrasion tester manufactured according to ASTM C-704:2014 standards. It describes the equipment purpose, structure, accessories, operating procedure, calibration certificates, user guidelines, terms and conditions, and warranty. The abrasion tester is used to measure the abrasion resistance of refractory materials according to ASTM C-704:2014 procedures and includes components like pressure gauges, a vacuum gauge, regulator, and accessories needed to perform abrasion tests on samples.
The TABER Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping,
engraving and other similar physical damage not classified as ordinary wear.
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. Their Ross Flex Tester can simultaneously test six pairs of samples (12 pieces total) for rubber thickness ranging from 1/8 to 1/2 inches. The flex tester has an adjustable flexing angle of 90 degrees, test speeds from 100 to 300 cycles per minute, and an LCD counter that reads up to 999,999. The machine measures 58x60x32 centimeters and weighs 62 kilograms, operating on 220V or 110V power. The Ross Flex Tester conforms to standards including ASTM D 1052, ISO 4643, and SATRA TM 60 for rubber flexibility testing.
FEC is an ISO 9001 certified company that manufactures and sells world class filter testing equipment from their sales office in New Delhi, India. Their Ross Flex Tester can simultaneously test six pairs of samples (12 pieces total) for rubber thickness ranging from 1/8 to 1/2 inches. The flex tester has an adjustable flexing angle of 90 degrees, test speeds from 100 to 300 cycles per minute, and an LCD counter that reads from 0 to 999,999. The machine measures 58x60x32 centimeters and weighs 62 kilograms, operating on 220V/50Hz or 110V/60Hz power. The Ross Flex Tester conforms to standards ASTM D 1052, ISO 4643, and
This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
The YGJ-02 is a device for testing ink fastness on printed materials like plastic films and glass paper. It determines adhesion by rolling an adhesive tape under a specified load and speed and then peeling it to observe ink removal. The YGJ-02 can test adhesion of surface coatings and follows standards like GB/T 7707. It is controlled by a microcomputer and is useful for testing adhesives and other applications.
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
Labthink Instruments Co., Ltd. produces a falling dart impact tester that can automatically test specimens using one of two methods (A or B) and determine impact resistance. The tester uses electromagnetic suspension and automatic release of the falling dart to reduce errors from manual operation. It has pneumatic clamping, dual start modes, and an observation light for user convenience. Test results are displayed and data can be exported via the included printer or Lab Data Sharing System software. The falling dart impact tester conforms to various international standards and can test properties like impact resistance of films, paper, aluminum, and composites.
This document provides information on an abrasion tester manufactured according to ASTM C-704:2014 standards. It describes the equipment purpose, structure, accessories, operating procedure, calibration certificates, user guidelines, terms and conditions, and warranty. The abrasion tester is used to measure the abrasion resistance of refractory materials according to ASTM C-704:2014 procedures and includes components like pressure gauges, a vacuum gauge, regulator, and accessories needed to perform abrasion tests on samples.
The TABER Multi-Finger Scratch / Mar Tester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping,
engraving and other similar physical damage not classified as ordinary wear.
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. Their Ross Flex Tester can simultaneously test six pairs of samples (12 pieces total) for rubber thickness ranging from 1/8 to 1/2 inches. The flex tester has an adjustable flexing angle of 90 degrees, test speeds from 100 to 300 cycles per minute, and an LCD counter that reads up to 999,999. The machine measures 58x60x32 centimeters and weighs 62 kilograms, operating on 220V or 110V power. The Ross Flex Tester conforms to standards including ASTM D 1052, ISO 4643, and SATRA TM 60 for rubber flexibility testing.
FEC is an ISO 9001 certified company that manufactures and sells world class filter testing equipment from their sales office in New Delhi, India. Their Ross Flex Tester can simultaneously test six pairs of samples (12 pieces total) for rubber thickness ranging from 1/8 to 1/2 inches. The flex tester has an adjustable flexing angle of 90 degrees, test speeds from 100 to 300 cycles per minute, and an LCD counter that reads from 0 to 999,999. The machine measures 58x60x32 centimeters and weighs 62 kilograms, operating on 220V/50Hz or 110V/60Hz power. The Ross Flex Tester conforms to standards ASTM D 1052, ISO 4643, and
This document provides information on the Neobiotech CAD/CAM system, including specifications for its milling machines, furnaces, and materials. Key details include:
- The CM3i, CM4i, and CM5i milling machines with their axis configurations, spindle power, sizes, and material milling times.
- The module upgrade system that allows axis upgrading from 3 to 5 axes for increased accuracy and efficiency.
- Compatible materials that can be milled including zirconia, titanium, PMMA, and resin, as well as a sintering furnace for final processing.
- Associated tools, blocks, links, and scan bodies made from materials like titanium,
The CAMeleon CS is a 5-axis milling machine capable of high-precision machining of dental materials like zirconia, glass ceramics, composite resins, and PMMA. It features a 500W spindle that can reach speeds up to 100,000 RPM, allowing it to mill materials both dry and wet. The machine has a 6-tool automatic changer and accuracy of ±0.001mm via servo motors and harmonic drives installed on all axes. It is suitable for milling dental copings, crowns, and other small dental parts at a high capacity of 700-1000 parts per month.
FEC manufactures a Benne wart flex tester intended to determine the resistance of components and materials to crack growth during repeated flexing. The tester can flex samples at 90 degrees up to 150 cycles per minute using a 30mm diameter mandrel. It is powered by a 1/2 HP single phase motor and has a six digit counter. The flex tester is commonly used to test the resistance to cuts and cracks of shoe outsoles during flexing according to various international standards.
FEC manufactures a Benne wart flex tester intended to determine the resistance of components and materials to crack growth during repeated flexing. The tester can flex samples at 90 degrees up to 150 cycles per minute using a 30mm diameter mandrel. It is powered by a 1/2 HP single phase motor and has a six digit counter. The flex tester is commonly used to test the resistance to cuts and cracks of shoe outsoles during flexing according to various international standards.
The document describes a crush strength tester made by FEC. It tests the crush strength and adhesion strength of corrugated board. The tester has a precise ball screw that steadily compresses specimens. A load cell detects the compression signal and displays test results on an indicator. Key features include a 200 kg capacity, adjustable fixtures up to 200 mm, digital readout, safety switches, and peak hold functionality.
The document describes a crush strength tester made by FEC. It can test the crush strength and adhesion strength of corrugated board. The tester has a precise ball screw that steadily compresses specimens. A load cell detects the compression signal which is analyzed by a test program to display results on an indicator. Key features include a 200 kg capacity, adjustable fixtures up to 200 mm diameter, digital readout display, safety limit switches, and load/unload switching.
This document summarizes product testing results for a model OC-K68 office chair. It includes:
1. Testing was conducted from November 10-13, 2014 at the Fo Shan Rocco Furniture Co., Ltd. Product Testing Center in Foshan City, China.
2. The chair passed all tests including backrest strength, base strength, drop test, stability, arm strength, and compression test according to ANSI/BIFMA X5.1-2011 standards.
3. The test report provides results for sample #1 and applies only to the items tested.
Effects of machining on the mechanical propertis of Ixef® PARARose Catherin
This document summarizes a study on the effects of machining on the mechanical properties of Ixef® polyarylamide (PARA), a glass-filled nylon. Tensile test samples were prepared from both injection molded and extruded stock shapes of Ixef® PARA. Testing found that the tensile strength and modulus of machined samples were significantly lower than molded samples, with strengths reduced by up to 80% in extruded samples. Although machined parts have acceptable dimensions, their mechanical properties are compromised due to the lack of fiber orientation in extruded stock shapes. The document concludes that while extruded Ixef® PARA can be machined for form and fit, it should not be used to evaluate performance
Universal abrasion resistant Tester can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials.
This document describes a digital tensile testing machine that measures the tensile strength of various materials like paper, rubber, and polymers. It has features like a microprocessor, safety limit switches, auto tare function, peak hold display, and touch control. It can test samples at various capacities from 10,000 kg to 10 kg with 1% accuracy. The machine can test in load/elongation, load/time, and elongation/time modes and generates test reports with serial numbers, load and elongation values, and time intervals.
180 Degree Peel Tests on Syringe Blister PacksAMETEK STC
The document discusses performing a 180 degree peel test on syringe blister packs using a motorized force tester to verify the integrity of the packaging. The proper grips and testing procedure are important to get accurate results. A self-tightening wedge grip with serrated faces is recommended to prevent premature failure and ensure the small tabs are centered during testing. The tester provides load and displacement data during the peel to measure the maximum adhesion force.
This document discusses tire testing and the manufacturing process. It covers:
- Tire manufacturing is a complex process involving over 200 raw materials. Quality control and R&D are critical.
- Common tire tests include tension, adhesion, tear, fatigue and wear tests. Tension tests are often done according to ASTM D412 or ISO 37 standards using dumbbell or ring specimens at 500mm/min.
- Proper gripping, extensometers, and environmental controls are needed to get accurate tension test results, especially for rubber's high elongations. Both contacting and non-contacting extensometers are used.
This document provides specifications for the JMC Products 40x50x32 counter rotating fan. Key details include dimensions of 40mm x 50mm x 32mm, a maximum speed of 10,200 RPM at 12VDC, airflow of 18.5 CFM, and weight of 41.5 grams. JMC Products is a thermal solutions provider headquartered in Austin, Texas with manufacturing in Dongguan, China and application centers in Europe and Taiwan. They develop fans and cooling solutions for electronics applications.
Trecho do livro “Sinergia Fator de Sucesso nas Realizações Humanas”
Sérgio Lins editado pela Campus-Elsevier em 2005
Operação é o ato de processar ou realizar um trabalho de forma ordenada, visando a produção de algo útil. A operação está sujeita a uma direção e responsabilidade, levando em conta o sentido da capacidade de responder por atos e decisões com competência e eficácia.[20] Neste sentido, o trabalho colaborativo exige que cada decisão seja tomada com total independência dos interesses pessoais, visando o aproveitamento da diversidade complementar das competências, de modo a produzir resultados de maneira eficaz.
Este documento descreve o modelo de dados de uma biblioteca universitária, incluindo entidades como publicações, autores e alunos, bem como suas propriedades e relacionamentos. Ele representa fichas de empréstimo, livros e outros materiais, seus autores, e estudantes cadastrados na biblioteca com seus respectivos dados.
O documento descreve a evolução da moeda ao longo do tempo, começando com a troca direta de mercadorias sem uma medida comum de valor, evoluindo para a moeda-mercadoria, depois moeda metálica, moeda papel e finalmente moeda escritural atual.
La biología es una ciencia que estudia los seres vivos desde las células hasta los seres humanos, describiendo las características y comportamientos de cada especie. Además, la biología es importante porque examina la vida en todos sus niveles, desde lo microscópico hasta lo macroscópico.
This document provides information on the Neobiotech CAD/CAM system, including specifications for its milling machines, furnaces, and materials. Key details include:
- The CM3i, CM4i, and CM5i milling machines with their axis configurations, spindle power, sizes, and material milling times.
- The module upgrade system that allows axis upgrading from 3 to 5 axes for increased accuracy and efficiency.
- Compatible materials that can be milled including zirconia, titanium, PMMA, and resin, as well as a sintering furnace for final processing.
- Associated tools, blocks, links, and scan bodies made from materials like titanium,
The CAMeleon CS is a 5-axis milling machine capable of high-precision machining of dental materials like zirconia, glass ceramics, composite resins, and PMMA. It features a 500W spindle that can reach speeds up to 100,000 RPM, allowing it to mill materials both dry and wet. The machine has a 6-tool automatic changer and accuracy of ±0.001mm via servo motors and harmonic drives installed on all axes. It is suitable for milling dental copings, crowns, and other small dental parts at a high capacity of 700-1000 parts per month.
FEC manufactures a Benne wart flex tester intended to determine the resistance of components and materials to crack growth during repeated flexing. The tester can flex samples at 90 degrees up to 150 cycles per minute using a 30mm diameter mandrel. It is powered by a 1/2 HP single phase motor and has a six digit counter. The flex tester is commonly used to test the resistance to cuts and cracks of shoe outsoles during flexing according to various international standards.
FEC manufactures a Benne wart flex tester intended to determine the resistance of components and materials to crack growth during repeated flexing. The tester can flex samples at 90 degrees up to 150 cycles per minute using a 30mm diameter mandrel. It is powered by a 1/2 HP single phase motor and has a six digit counter. The flex tester is commonly used to test the resistance to cuts and cracks of shoe outsoles during flexing according to various international standards.
The document describes a crush strength tester made by FEC. It tests the crush strength and adhesion strength of corrugated board. The tester has a precise ball screw that steadily compresses specimens. A load cell detects the compression signal and displays test results on an indicator. Key features include a 200 kg capacity, adjustable fixtures up to 200 mm, digital readout, safety switches, and peak hold functionality.
The document describes a crush strength tester made by FEC. It can test the crush strength and adhesion strength of corrugated board. The tester has a precise ball screw that steadily compresses specimens. A load cell detects the compression signal which is analyzed by a test program to display results on an indicator. Key features include a 200 kg capacity, adjustable fixtures up to 200 mm diameter, digital readout display, safety limit switches, and load/unload switching.
This document summarizes product testing results for a model OC-K68 office chair. It includes:
1. Testing was conducted from November 10-13, 2014 at the Fo Shan Rocco Furniture Co., Ltd. Product Testing Center in Foshan City, China.
2. The chair passed all tests including backrest strength, base strength, drop test, stability, arm strength, and compression test according to ANSI/BIFMA X5.1-2011 standards.
3. The test report provides results for sample #1 and applies only to the items tested.
Effects of machining on the mechanical propertis of Ixef® PARARose Catherin
This document summarizes a study on the effects of machining on the mechanical properties of Ixef® polyarylamide (PARA), a glass-filled nylon. Tensile test samples were prepared from both injection molded and extruded stock shapes of Ixef® PARA. Testing found that the tensile strength and modulus of machined samples were significantly lower than molded samples, with strengths reduced by up to 80% in extruded samples. Although machined parts have acceptable dimensions, their mechanical properties are compromised due to the lack of fiber orientation in extruded stock shapes. The document concludes that while extruded Ixef® PARA can be machined for form and fit, it should not be used to evaluate performance
Universal abrasion resistant Tester can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials.
This document describes a digital tensile testing machine that measures the tensile strength of various materials like paper, rubber, and polymers. It has features like a microprocessor, safety limit switches, auto tare function, peak hold display, and touch control. It can test samples at various capacities from 10,000 kg to 10 kg with 1% accuracy. The machine can test in load/elongation, load/time, and elongation/time modes and generates test reports with serial numbers, load and elongation values, and time intervals.
180 Degree Peel Tests on Syringe Blister PacksAMETEK STC
The document discusses performing a 180 degree peel test on syringe blister packs using a motorized force tester to verify the integrity of the packaging. The proper grips and testing procedure are important to get accurate results. A self-tightening wedge grip with serrated faces is recommended to prevent premature failure and ensure the small tabs are centered during testing. The tester provides load and displacement data during the peel to measure the maximum adhesion force.
This document discusses tire testing and the manufacturing process. It covers:
- Tire manufacturing is a complex process involving over 200 raw materials. Quality control and R&D are critical.
- Common tire tests include tension, adhesion, tear, fatigue and wear tests. Tension tests are often done according to ASTM D412 or ISO 37 standards using dumbbell or ring specimens at 500mm/min.
- Proper gripping, extensometers, and environmental controls are needed to get accurate tension test results, especially for rubber's high elongations. Both contacting and non-contacting extensometers are used.
This document provides specifications for the JMC Products 40x50x32 counter rotating fan. Key details include dimensions of 40mm x 50mm x 32mm, a maximum speed of 10,200 RPM at 12VDC, airflow of 18.5 CFM, and weight of 41.5 grams. JMC Products is a thermal solutions provider headquartered in Austin, Texas with manufacturing in Dongguan, China and application centers in Europe and Taiwan. They develop fans and cooling solutions for electronics applications.
Trecho do livro “Sinergia Fator de Sucesso nas Realizações Humanas”
Sérgio Lins editado pela Campus-Elsevier em 2005
Operação é o ato de processar ou realizar um trabalho de forma ordenada, visando a produção de algo útil. A operação está sujeita a uma direção e responsabilidade, levando em conta o sentido da capacidade de responder por atos e decisões com competência e eficácia.[20] Neste sentido, o trabalho colaborativo exige que cada decisão seja tomada com total independência dos interesses pessoais, visando o aproveitamento da diversidade complementar das competências, de modo a produzir resultados de maneira eficaz.
Este documento descreve o modelo de dados de uma biblioteca universitária, incluindo entidades como publicações, autores e alunos, bem como suas propriedades e relacionamentos. Ele representa fichas de empréstimo, livros e outros materiais, seus autores, e estudantes cadastrados na biblioteca com seus respectivos dados.
O documento descreve a evolução da moeda ao longo do tempo, começando com a troca direta de mercadorias sem uma medida comum de valor, evoluindo para a moeda-mercadoria, depois moeda metálica, moeda papel e finalmente moeda escritural atual.
La biología es una ciencia que estudia los seres vivos desde las células hasta los seres humanos, describiendo las características y comportamientos de cada especie. Además, la biología es importante porque examina la vida en todos sus niveles, desde lo microscópico hasta lo macroscópico.
Gilberto Dominguez introduces himself in a letter to Mrs. Sanchez as a certified Airfield Operations Specialist. He has six years of experience with Paredes Company where he received introductory training. He also has three years with Vale Company acquiring three levels of preparation and four years of field experience with Hanna Company. Dominguez includes a copy of his resume and contact information, offering his services as an Airfield Operations Specialist.
Es gibt viele schöne Orte auf der Welt, aber die Keralas Schönheit ist unbeschreiblich. Wenn Sie für einen Urlaub planen, dann müssen Kerala Tour-Paket sofort erfolgen.
LUCKY TRIMMER Tanz Performance Serie #12, 2008Lucky Trimmer
LUCKY TRIMMER Dance Performance Series
- since 2004 presented twice yearly in Berlin
Spotlighting both emerging and established performing artists presenting works with a length of 10 minutes maximum, LUCKY TRIMMER represents a broad vision of what contemporary dance is today, encouraging performance-makers of all kinds to experiment, question, dare and most importantly, to dance.
Making the case. Making the case for comms, workshop, 22 October 2014.CharityComms
This document discusses the challenges of marketing for charities compared to commercial brands. It notes that charities have fewer resources and must appeal to causes, beneficiaries, donors, and influencers rather than just customers and competitors. The document also shows data on marketing spending, with commercial brands spending much more than top charities. It advocates that charities should focus on increasing their penetration of the "Middle Ground" population, who donate occasionally but could give more. The case study of Prostate Cancer UK is presented as an example of a successful campaign that improved awareness, engagement, and donations through an effective media strategy.
A mensagem pede para a pessoa reenviar para 10 amigas mulheres para alegrá-las, dizendo que elas foram consideradas entre as 10 mulheres mais belas e que devem "encantar" suas amigas também. A mensagem é atribuída a um autor desconhecido e pede para manter os créditos e contato do tradutor ao repassar.
El modelo entidad-relación permite representar las entidades y relaciones relevantes de un sistema de información. Las entidades representan objetos del mundo real con atributos que los identifican de forma única. Las relaciones describen dependencias entre entidades. El modelo se completa con diagramas, listas de atributos y restricciones como las correspondencias de cardinalidad entre entidades relacionadas.
YP-S3 ist so schoen bunt und gerade mal so gross wie ein Eis am Stil. Spass soll er machen, Musik, Videos und auch Spiele fuer die Unterhaltung liefern.
IBM Smarter care - Impact at Point of CareIBM Government
Health and social care systems are interdependent and each critically affects the other. The ability to transcend these traditional boundaries and work toward the common goal of holistic and individual care is called Smarter Care. For more details click here http://ibm.co/1n3LJio
NLW-20 Adhesive Tensile & Shear Tester is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives.
XLW (B) Auto Tensile Tester can be used to measure physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive, and open force, etc.
Standard test plates and weights ensure the accuracy of test data
Six testing stations could test groups of specimens simultaneously
Auto timing and locking functions provide higher accuracy of test results
The instrument is controlled by micro-computer, with PVC operation panel, membrane switches and LCD, which is convenient for customers to operate and view test data
The document describes an automatic tensile tester manufactured by Labthink Instruments Co. Ltd. of China. It has a load cell capacity of 100N, 200N or 500N and can test at speeds of 50-500mm/min. The instrument has 7 test modes and over 100 grips to test a wide range of materials. It provides accurate and flexible material testing with automated functions and data analysis software.
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges.
XLW (PC) Auto Tensile Tester can be used to determine physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage (plaster) etc.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation.
The document describes the Labthink XLW (M) Auto Tensile Tester, which is used to test the tensile, tear, and puncture strength of various flexible packaging materials. It can test over 100 different materials using interchangeable grips and has 7 test modes and speeds. It collects and analyzes force and displacement data during tests and includes software for statistical analysis and report generation. Common applications include testing the strength of films, adhesive tapes, rubber closures, and more. It adheres to various industry standards and has configurable load cell capacities, clamping systems, and output options.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
BLD-200N Bonding Force Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protection films, release paper, laminated films, leatheroid, woven bags and paper.
The XLW (EC) Auto Tensile Tester from Labthink Instruments measures the tensile, peeling, deformation and other performance properties of various materials like plastics, composites, films and more. It has 8 test modes, bidirectional testing capabilities, precision load cells and integrated software for analysis. The instrument conforms to industry standards and is suitable for applications in fields like packaging and medical materials testing.
NJY-20 Digital Torque Tester can be used to measure the open force and lock force of the caps of bottles, suction and flexible tube packages. The open and lock forces of bottle caps are important online and offline technical parameters of production.
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
Labthink Instruments Co. produces a falling dart impact tester (FDI-01) that measures the impact resistance of materials like plastic films, aluminum foils, paper, and more. The FDI-01 uses one of two test methods (A or B) to determine the number of specimen failures from a falling dart, then calculates the impact resistance result automatically. It has features like a touch screen interface, electromagnetic dart suspension, and data export functions. The FDI-01 adheres to international testing standards and is suitable for both basic impact resistance testing and extended applications like shoulder lining evaluation.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
Similar to CZY-6S-Adhesive Label Lasting Adhesive Tester (20)
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalRPeter Gallagher
In this session delivered at NDC Oslo 2024, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
1. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85812140
www.labthinkinter n atio n al.com.cn
Professional Technology
Standard test plates and weights ensure the accuracy of data
Six testing stations could test groups of specimens simultaneously
Auto timing and locking functions provide higher accuracy of test results
The instrument is controlled by micro-computer, with PVC operation panel, membrane switches and LCD, which is convenient for customers to operate and view test data
Test Principle
The test plate with adhesive specimen is vertically hanged on the stand and its bottom attached with a standard weight. The lasting adhesive property could be obtained by measuring the displacement of specimen on vertical test plate or the time to failure at such load.
This test instrument conforms to the standards: GB/T 4851, ASTM D3654, JIS Z0237
Applications
CZY-6S is professionally applicable to the determination of lasting adhesive property of:
Basic Applications
Adhesives
Including various adhesives, e.g. pressure-sensitive tapes, medical patches, adhesive labels, and protection films.
Technical Specifications
Items
Specifications
Standard Roller
2000 g ± 50 g
Weight
1000 g ± 10g (with load plate)
Test Plate
60 mm (L) x 40 mm (W) x 1.5 mm (D)
Timing Range
0~100 h (standard)
0~10000 h (optional)
Number of Stations
6
Instrument Dimension
600 mm (L) x 240 mm (W) x 400 mm (H)
Power Supply
AC220V 50Hz
Net Weight
20 kg
Please Note: Labthink is always dedicated to the innovation and improvement of product performance function. Therefore, technical specifications are subject to change without further notice. Please visit our website at www.labthinkinternational.com.cn for the latest updates. Labthink reserves rights of final interpretation and revision.
CZY-6S Lasting Adhesive Tester
PARAM®