CV englais
•Download as DOCX, PDF•
0 likes•125 views
Nadjib Cherait is an Algerian automation and instrumentation engineer with over 30 years of experience. He has worked as a project engineer for companies in Algeria and the US, managing automation and instrumentation projects for various industrial facilities. He is proficient in automation systems from manufacturers such as DeltaV, Siemens, Schneider, and Endress+Hauser.
Report
Share
Report
Share
Recommended
Resume M. Noyola _ 2016
Matias Noyola Moran has over 20 years of experience in automation engineering, process engineering, and manufacturing engineering. He is currently working as an Automation Engineer for IIMCO/Davol Surgical, where he is responsible for installation of automation equipment for catheter production lines, mix preparation rooms, and distillation units. Previously he held process engineering and manufacturing engineering roles at companies like Federal Mogul Lighting and Grupo Dekko Mexico.
Scada Systems
This certificate certifies that Mr. X has successfully completed an industrial automation training course covering PLCs, remote data acquisition systems, and SCADA software. The course was held from date 1 to date 2 at Prolific Systems and Technologies Pvt. Ltd. in Thane.
Janet Coppola
Janet L. Coppola has over 25 years of experience assembling test fixtures and microelectronic components. She has worked as a Senior Assembly Technician at ANADIGICS Inc. for over 24 years, where she assembled RF test fixtures, wrote assembly documentation, and trained other technicians. Prior to that, she spent 16 years at Lockheed Electronics Co. Inc. in various microelectronics assembly roles, including Die mounting, wire bonding, and soldering of components. She has extensive education in microelectronics assembly, Microsoft Office, AutoCAD, and as an Electronic Technician.
Raja CV Instrument
This document provides a summary of S Raja's qualifications and experience as an instrumentation engineer. It includes details about his 9 years of experience in instrumentation projects for oil, gas and utility companies. It also lists his areas of expertise, such as maintenance, commissioning, automation, and handling a variety of instrumentation equipment. His core competencies include working with DCS, PLC, SCADA and safety systems from manufacturers like Yokogawa, ABB and Siemens.
Norsok standards oil&gas 2019
The document outlines various NORSOK standards for equipment and operations used in the oil and gas industry. There are over 50 standards listed organized into categories including subsea production systems, drilling facilities, materials, piping, structures, process systems, lifting equipment, instrumentation, electrical systems, telecommunications, and health and safety. The NORSOK standards provide requirements for equipment, design, fabrication, installation and operation. They aim to reduce risk and improve safety and integrity for offshore and onshore oil and gas systems.
Sheik Nizamuddin CV
This document contains the resume of Nizamuddin Sheik, who has over 8 years of experience working with analytical instrumentation. It lists his educational background, including a diploma in electronics and communication engineering and ITI in instrument mechanics. It also outlines his extensive training experience with various AMETEK analyzer models. The resume describes his work history maintaining and servicing analytical instruments for oil, gas, and industrial companies in Qatar, India, and the UAE. It provides details of his responsibilities in installation, commissioning, troubleshooting and maintenance of various gas detection, moisture, and oxygen analyzers.
Roy N. San Pedro - Curriculum Vitae
This document contains the resume of Roy Narvaez. It summarizes his professional experience working in instrumentation for over 15 years, including roles as an Instrumentation Lead and Instrument Supervisor. It also lists his educational background in Instrumentation and Process Control Technology. His technical skills include pneumatics, hydraulics, sensors, industrial controls, PLCs, and calibration.
Servotech overview
Three case studies are summarized:
1. A company saved thousands of pounds by having an obsolete digital engine management unit reverse engineered and its components replaced.
2. A wiring harness for a gas engine was replaced within three days after being destroyed in a fire, compared to a two week delivery time from the OEM.
3. A power supply failure taking six gas engines offline for five days was collected, repaired, and returned within 24 hours, restoring the engines to operation.
Recommended
Resume M. Noyola _ 2016
Matias Noyola Moran has over 20 years of experience in automation engineering, process engineering, and manufacturing engineering. He is currently working as an Automation Engineer for IIMCO/Davol Surgical, where he is responsible for installation of automation equipment for catheter production lines, mix preparation rooms, and distillation units. Previously he held process engineering and manufacturing engineering roles at companies like Federal Mogul Lighting and Grupo Dekko Mexico.
Scada Systems
This certificate certifies that Mr. X has successfully completed an industrial automation training course covering PLCs, remote data acquisition systems, and SCADA software. The course was held from date 1 to date 2 at Prolific Systems and Technologies Pvt. Ltd. in Thane.
Janet Coppola
Janet L. Coppola has over 25 years of experience assembling test fixtures and microelectronic components. She has worked as a Senior Assembly Technician at ANADIGICS Inc. for over 24 years, where she assembled RF test fixtures, wrote assembly documentation, and trained other technicians. Prior to that, she spent 16 years at Lockheed Electronics Co. Inc. in various microelectronics assembly roles, including Die mounting, wire bonding, and soldering of components. She has extensive education in microelectronics assembly, Microsoft Office, AutoCAD, and as an Electronic Technician.
Raja CV Instrument
This document provides a summary of S Raja's qualifications and experience as an instrumentation engineer. It includes details about his 9 years of experience in instrumentation projects for oil, gas and utility companies. It also lists his areas of expertise, such as maintenance, commissioning, automation, and handling a variety of instrumentation equipment. His core competencies include working with DCS, PLC, SCADA and safety systems from manufacturers like Yokogawa, ABB and Siemens.
Norsok standards oil&gas 2019
The document outlines various NORSOK standards for equipment and operations used in the oil and gas industry. There are over 50 standards listed organized into categories including subsea production systems, drilling facilities, materials, piping, structures, process systems, lifting equipment, instrumentation, electrical systems, telecommunications, and health and safety. The NORSOK standards provide requirements for equipment, design, fabrication, installation and operation. They aim to reduce risk and improve safety and integrity for offshore and onshore oil and gas systems.
Sheik Nizamuddin CV
This document contains the resume of Nizamuddin Sheik, who has over 8 years of experience working with analytical instrumentation. It lists his educational background, including a diploma in electronics and communication engineering and ITI in instrument mechanics. It also outlines his extensive training experience with various AMETEK analyzer models. The resume describes his work history maintaining and servicing analytical instruments for oil, gas, and industrial companies in Qatar, India, and the UAE. It provides details of his responsibilities in installation, commissioning, troubleshooting and maintenance of various gas detection, moisture, and oxygen analyzers.
Roy N. San Pedro - Curriculum Vitae
This document contains the resume of Roy Narvaez. It summarizes his professional experience working in instrumentation for over 15 years, including roles as an Instrumentation Lead and Instrument Supervisor. It also lists his educational background in Instrumentation and Process Control Technology. His technical skills include pneumatics, hydraulics, sensors, industrial controls, PLCs, and calibration.
Servotech overview
Three case studies are summarized:
1. A company saved thousands of pounds by having an obsolete digital engine management unit reverse engineered and its components replaced.
2. A wiring harness for a gas engine was replaced within three days after being destroyed in a fire, compared to a two week delivery time from the OEM.
3. A power supply failure taking six gas engines offline for five days was collected, repaired, and returned within 24 hours, restoring the engines to operation.
Veracel andritz - i io-t - online wirelless vibration project implementa...
Veracel implemented a wireless online monitoring system from Smart Diagnostics to monitor equipment reliability and prevent unexpected failures. They installed over 100 sensors across critical assets without using cables. This allowed for fast and low-cost installation. During testing and after implementation, the system accurately identified equipment issues from vibration data, helping Veracel avoid production losses through quicker fault detection and repairs. Veracel plans to expand the monitoring system to more assets and new sensor types to further improve process reliability.
High-performance Controller for Industrial Weighing
There's a new industrial force measurement and weighing controller setting performance standards designed to meet tomorrow’s ever expanding industrial weighing requirements.
The BLH Nobel G5 process control instrument offers high speed and high-performance control for industrial weighing and force measurement. G5 offers a highly flexible instrument for your process automation needs.
Prozess Technologie REVEAL Platform
A Flexible, Customized Platform to Give You Just What You Need. The Reveal platform gives you a customized solution along with flexibility on how to operate and integrate it. You have choice with Reveal. We can do the application modeling for you, or you can build your own.
Kes Us Intel Presentation 2008 Smaller Version
KESU Systems and Service Inc. is a division of Sunright Ltd with operations in Tempe, Chandler, Arizona and Austin, Texas. It provides burn-in, testing, and repair services for printed circuit boards and has over 2,000 employees operating across 7 countries. Its facilities in Arizona and Texas offer various reliability testing and repair services, including burn-in testing, environmental testing, and load board and test interface unit repair. KESU works with Intel in Costa Rica and has received Intel's Preferred Quality Supplier Award for four consecutive years for supporting its operations in Singapore.
7 - Encardio Rite ONLINE WATER QUANTITY AND QUALITY MONITORING-Sep-15
The document is a corporate presentation from Encardio-rite Geosystems that discusses their services related to water resources monitoring and management. It outlines their vision to be a global leader in water level and quality monitoring. It also describes their capabilities such as manufacturing facilities, products and services offered, global presence and projects completed. They provide turnkey solutions for water level and quality monitoring using various sensors and online data collection and monitoring systems.
Process Gas Chromatograph for Industrial Use
Yokogawa has a long history of supplying process gas chromatographs to the oil & gas, refining and petrochemical industries around the world. The new process GC that meets the ever growing demands for analytical reliability and precision while improving the total cost-of ownership through built-in automated maintenance functions never seen before.
From the innovative 12-inch color touch screen HMI to the powerful predictive diagnostics, the GC8000 is truly a process GC for the 21st century. But the GC8000 is not just all about new electronics; it also brings a number of important innovations in gas chromatograph analytical capabilities. For the first time, parallel chromatography is made practical with the introduction of the GC Module (GCM) concept. By setting up virtual GCs within a single analyzer, all chromatograph settings, displays, and data are truly segregated for easy understanding and maintenance. There are even built-in graphical overview screens showing each of the individual GC Modules.
The GC8000 sets new standards for process gas chromatography while at the same time offering hardware and electronics that are recognized for robust and reliable operation.
Hazardous Area for Dust - Proconics
The document provides an introduction to hazardous area classification and intrinsic safety audits/assessments. It discusses the importance of maintaining the integrity of hazardous area installations for safety reasons. Throughout the lifecycle of hazardous area installations, from classification to maintenance, standards such as SANS 60079 must be followed to ensure compliance. Periodic inspections are required to verify that installations continue to comply with requirements to preserve safety.
resume
Sagar Ennam is seeking a position as an analyzer and instrumentation technician with over 5 years of experience calibrating, testing, and maintaining various process and analytical instruments. He has worked on gas chromatography, cloud point analyzers, TOC analyzers, pH and conductivity instruments, oxygen analyzers, moisture analyzers, and gas detectors. Sagar also has experience installing, commissioning, and testing process instrumentation including pressure, temperature, level, and flow transmitters, control valves, and sensors. He is proficient in DCS and PLC systems and has participated in several plant startups and commissioning activities. Sagar holds a BTech in electrical engineering and a diploma in electronics and instrumentation engineering.
Sajjad QC Engineer
Sajjad Abdul Shukoor has over 10 years of experience in electrical and instrumentation installations, testing, pre-commissioning, and inspections for oil and gas projects in the Middle East. He holds a B.Tech in Electrical and Electronics Engineering and is COMPEX certified. His experience includes inspection and testing of electrical equipment, cables, instruments, and fire and gas systems; loop checking; calibration; and ensuring compliance with standards.
Absolute Quality
Absolute Quality Mfg. Inc. is an expert manufacturer of wire harnesses, cable assemblies, and electromechanical assemblies. They offer full quality control testing and inspection including 100% inspection of materials. They serve a wide range of industries such as automotive, medical, and telecommunications. Absolute Quality has extensive tooling and manufacturing capabilities and facilities to support customer needs.
RobertoRReyesResume
Roberto Reyes has over 20 years of experience in semiconductor processing and fabrication of III-V substrates. He has worked for several companies processing materials like InP wafers used for applications such as sensors, cameras, and telecommunications. His experience includes tasks like metal deposition, etching, polishing, photolithography, and ensuring process parameters and equipment are functioning properly. He is skilled with process development, integration, troubleshooting, and training other engineers.
Engineering_capabilities_2015
Seminet provides engineering design and manufacturing services including vacuum chamber design and build, precision air handling systems, enclosures, and electro-mechanical assembly and integration. Located in San Jose, CA, Seminet has 65,000 square feet of facilities for engineering analysis, custom manufacturing, and vertically integrated system integration and testing. Seminet specializes in semiconductor and environmental equipment and has patents for precise environmental control and nitrogen purging systems.
Jaime alvarez2
El documento describe las características y funciones de un supervisor. Un supervisor debe planificar, organizar, dirigir y controlar el trabajo de los empleados para mejorar la productividad. También es responsable de desarrollar a los empleados de manera integral y monitorear su desempeño y actitudes. Entre las características clave de un supervisor se encuentran el conocimiento del trabajo y los procesos, habilidades para instruir al personal, dirigirlos y mejorar continuamente los métodos. Sus principales funciones incluyen proyectar metas, dirig
AEUTS--Plan--071110
This document provides a situation analysis and marketing plan for an event called "An Evening Under the Stars" being organized by the East Village Arts District Merchants. The analysis examines demand trends, target markets including upper-income women and donors under 45, and competitors. The plan outlines objectives like increasing brand awareness for merchants and raising funds for the Arts Council. Elements discussed include advertising, selling tickets for $100 each with proceeds split between promotion costs, commissions, and charity. The goal is to profitably promote local businesses and support the arts district.
Administración de operaciones
El documento habla sobre la administración de operaciones y los inventarios. Explica que la administración de operaciones se encarga de planificar, organizar y controlar la producción de bienes y servicios para aumentar la productividad y calidad. También describe los diferentes tipos de inventarios como inventario inicial, periódico, final, perpetuo y más. Finalmente, clasifica los inventarios según su forma en materias primas, productos en proceso, productos terminados y suministros.
Shrink sleeve labels
This document discusses considerations for designing shrink sleeve labels, noting that it is important to determine the location of the label within the seam and that the exact location is relevant to the orientation, layout, placement, and application content of the label.
ROSE PUB--25 Ideas by D_Thorwart
The document provides 25 steps for a successful product launch for Aspire Press, a division of Rose Publishing. It discusses the importance of planning, conducting marketing research through focus groups and surveys, building on past experience, targeting specific customer segments, and developing a strong marketing mix. The marketing consultant recommends Aspire Press target Christian women by partnering with local church women's ministries, conducting focus groups and surveys, and using direct marketing approaches to build long-term customer relationships. The document outlines strategies for each step of the marketing process to help Aspire Press successfully launch new products.
VPPR Training Module
This document provides guidance for a Vice President of Public Relations on promoting a Toastmasters club to local media. It recommends targeting an audience, developing a media list, and introducing the club to media contacts. The VPPR is advised to send promotional materials like press kits and news releases to media members and be available to give interviews. The document also covers creating a club newsletter or website to inform members and visitors, attending Toastmasters events, and maintaining standards at club meetings.
CV englais
Nadjib Cherait is an Algerian automation and instrumentation engineer with over 30 years of experience. He has worked as a project engineer for companies in Algeria and the US, managing automation and instrumentation projects for various industrial facilities. His areas of expertise include DCS, PLC, instrumentation, fire detection and suppression systems. He is proficient in automation software and protocols like DeltaV, Siemens PCS7, Schneider Premium, and programming languages including Pascal and Visual Basic.
Omni-Channel Projelendirme Süreçleri
Dijital dönüşümdeki perakende markaları için omni-channel projelerinin süreçlendirilmesi
More Related Content
What's hot
Veracel andritz - i io-t - online wirelless vibration project implementa...
Veracel implemented a wireless online monitoring system from Smart Diagnostics to monitor equipment reliability and prevent unexpected failures. They installed over 100 sensors across critical assets without using cables. This allowed for fast and low-cost installation. During testing and after implementation, the system accurately identified equipment issues from vibration data, helping Veracel avoid production losses through quicker fault detection and repairs. Veracel plans to expand the monitoring system to more assets and new sensor types to further improve process reliability.
High-performance Controller for Industrial Weighing
There's a new industrial force measurement and weighing controller setting performance standards designed to meet tomorrow’s ever expanding industrial weighing requirements.
The BLH Nobel G5 process control instrument offers high speed and high-performance control for industrial weighing and force measurement. G5 offers a highly flexible instrument for your process automation needs.
Prozess Technologie REVEAL Platform
A Flexible, Customized Platform to Give You Just What You Need. The Reveal platform gives you a customized solution along with flexibility on how to operate and integrate it. You have choice with Reveal. We can do the application modeling for you, or you can build your own.
Kes Us Intel Presentation 2008 Smaller Version
KESU Systems and Service Inc. is a division of Sunright Ltd with operations in Tempe, Chandler, Arizona and Austin, Texas. It provides burn-in, testing, and repair services for printed circuit boards and has over 2,000 employees operating across 7 countries. Its facilities in Arizona and Texas offer various reliability testing and repair services, including burn-in testing, environmental testing, and load board and test interface unit repair. KESU works with Intel in Costa Rica and has received Intel's Preferred Quality Supplier Award for four consecutive years for supporting its operations in Singapore.
7 - Encardio Rite ONLINE WATER QUANTITY AND QUALITY MONITORING-Sep-15
The document is a corporate presentation from Encardio-rite Geosystems that discusses their services related to water resources monitoring and management. It outlines their vision to be a global leader in water level and quality monitoring. It also describes their capabilities such as manufacturing facilities, products and services offered, global presence and projects completed. They provide turnkey solutions for water level and quality monitoring using various sensors and online data collection and monitoring systems.
Process Gas Chromatograph for Industrial Use
Yokogawa has a long history of supplying process gas chromatographs to the oil & gas, refining and petrochemical industries around the world. The new process GC that meets the ever growing demands for analytical reliability and precision while improving the total cost-of ownership through built-in automated maintenance functions never seen before.
From the innovative 12-inch color touch screen HMI to the powerful predictive diagnostics, the GC8000 is truly a process GC for the 21st century. But the GC8000 is not just all about new electronics; it also brings a number of important innovations in gas chromatograph analytical capabilities. For the first time, parallel chromatography is made practical with the introduction of the GC Module (GCM) concept. By setting up virtual GCs within a single analyzer, all chromatograph settings, displays, and data are truly segregated for easy understanding and maintenance. There are even built-in graphical overview screens showing each of the individual GC Modules.
The GC8000 sets new standards for process gas chromatography while at the same time offering hardware and electronics that are recognized for robust and reliable operation.
Hazardous Area for Dust - Proconics
The document provides an introduction to hazardous area classification and intrinsic safety audits/assessments. It discusses the importance of maintaining the integrity of hazardous area installations for safety reasons. Throughout the lifecycle of hazardous area installations, from classification to maintenance, standards such as SANS 60079 must be followed to ensure compliance. Periodic inspections are required to verify that installations continue to comply with requirements to preserve safety.
resume
Sagar Ennam is seeking a position as an analyzer and instrumentation technician with over 5 years of experience calibrating, testing, and maintaining various process and analytical instruments. He has worked on gas chromatography, cloud point analyzers, TOC analyzers, pH and conductivity instruments, oxygen analyzers, moisture analyzers, and gas detectors. Sagar also has experience installing, commissioning, and testing process instrumentation including pressure, temperature, level, and flow transmitters, control valves, and sensors. He is proficient in DCS and PLC systems and has participated in several plant startups and commissioning activities. Sagar holds a BTech in electrical engineering and a diploma in electronics and instrumentation engineering.
Sajjad QC Engineer
Sajjad Abdul Shukoor has over 10 years of experience in electrical and instrumentation installations, testing, pre-commissioning, and inspections for oil and gas projects in the Middle East. He holds a B.Tech in Electrical and Electronics Engineering and is COMPEX certified. His experience includes inspection and testing of electrical equipment, cables, instruments, and fire and gas systems; loop checking; calibration; and ensuring compliance with standards.
Absolute Quality
Absolute Quality Mfg. Inc. is an expert manufacturer of wire harnesses, cable assemblies, and electromechanical assemblies. They offer full quality control testing and inspection including 100% inspection of materials. They serve a wide range of industries such as automotive, medical, and telecommunications. Absolute Quality has extensive tooling and manufacturing capabilities and facilities to support customer needs.
RobertoRReyesResume
Roberto Reyes has over 20 years of experience in semiconductor processing and fabrication of III-V substrates. He has worked for several companies processing materials like InP wafers used for applications such as sensors, cameras, and telecommunications. His experience includes tasks like metal deposition, etching, polishing, photolithography, and ensuring process parameters and equipment are functioning properly. He is skilled with process development, integration, troubleshooting, and training other engineers.
Engineering_capabilities_2015
Seminet provides engineering design and manufacturing services including vacuum chamber design and build, precision air handling systems, enclosures, and electro-mechanical assembly and integration. Located in San Jose, CA, Seminet has 65,000 square feet of facilities for engineering analysis, custom manufacturing, and vertically integrated system integration and testing. Seminet specializes in semiconductor and environmental equipment and has patents for precise environmental control and nitrogen purging systems.
What's hot (12)
Veracel andritz - i io-t - online wirelless vibration project implementa...
Veracel andritz - i io-t - online wirelless vibration project implementa...
High-performance Controller for Industrial Weighing
High-performance Controller for Industrial Weighing
7 - Encardio Rite ONLINE WATER QUANTITY AND QUALITY MONITORING-Sep-15
7 - Encardio Rite ONLINE WATER QUANTITY AND QUALITY MONITORING-Sep-15
Viewers also liked
Jaime alvarez2
El documento describe las características y funciones de un supervisor. Un supervisor debe planificar, organizar, dirigir y controlar el trabajo de los empleados para mejorar la productividad. También es responsable de desarrollar a los empleados de manera integral y monitorear su desempeño y actitudes. Entre las características clave de un supervisor se encuentran el conocimiento del trabajo y los procesos, habilidades para instruir al personal, dirigirlos y mejorar continuamente los métodos. Sus principales funciones incluyen proyectar metas, dirig
AEUTS--Plan--071110
This document provides a situation analysis and marketing plan for an event called "An Evening Under the Stars" being organized by the East Village Arts District Merchants. The analysis examines demand trends, target markets including upper-income women and donors under 45, and competitors. The plan outlines objectives like increasing brand awareness for merchants and raising funds for the Arts Council. Elements discussed include advertising, selling tickets for $100 each with proceeds split between promotion costs, commissions, and charity. The goal is to profitably promote local businesses and support the arts district.
Administración de operaciones
El documento habla sobre la administración de operaciones y los inventarios. Explica que la administración de operaciones se encarga de planificar, organizar y controlar la producción de bienes y servicios para aumentar la productividad y calidad. También describe los diferentes tipos de inventarios como inventario inicial, periódico, final, perpetuo y más. Finalmente, clasifica los inventarios según su forma en materias primas, productos en proceso, productos terminados y suministros.
Shrink sleeve labels
This document discusses considerations for designing shrink sleeve labels, noting that it is important to determine the location of the label within the seam and that the exact location is relevant to the orientation, layout, placement, and application content of the label.
ROSE PUB--25 Ideas by D_Thorwart
The document provides 25 steps for a successful product launch for Aspire Press, a division of Rose Publishing. It discusses the importance of planning, conducting marketing research through focus groups and surveys, building on past experience, targeting specific customer segments, and developing a strong marketing mix. The marketing consultant recommends Aspire Press target Christian women by partnering with local church women's ministries, conducting focus groups and surveys, and using direct marketing approaches to build long-term customer relationships. The document outlines strategies for each step of the marketing process to help Aspire Press successfully launch new products.
VPPR Training Module
This document provides guidance for a Vice President of Public Relations on promoting a Toastmasters club to local media. It recommends targeting an audience, developing a media list, and introducing the club to media contacts. The VPPR is advised to send promotional materials like press kits and news releases to media members and be available to give interviews. The document also covers creating a club newsletter or website to inform members and visitors, attending Toastmasters events, and maintaining standards at club meetings.
CV englais
Nadjib Cherait is an Algerian automation and instrumentation engineer with over 30 years of experience. He has worked as a project engineer for companies in Algeria and the US, managing automation and instrumentation projects for various industrial facilities. His areas of expertise include DCS, PLC, instrumentation, fire detection and suppression systems. He is proficient in automation software and protocols like DeltaV, Siemens PCS7, Schneider Premium, and programming languages including Pascal and Visual Basic.
Omni-Channel Projelendirme Süreçleri
Dijital dönüşümdeki perakende markaları için omni-channel projelerinin süreçlendirilmesi
Television Programming
The document discusses various aspects of television programming and syndication. It begins by explaining that the most important aspects of programming are entertaining and informing audiences. It then discusses how programming is used to attract large audiences to view advertisements. The document covers programming evaluation criteria, different types of programming, the roles of executives like producers and syndicators, and considerations for purchasing syndicated shows like costs and time slots. It also briefly discusses arguments around television content standards and possible future trends in programming and syndication.
Viewers also liked (12)
Similar to CV englais
Curriculum Vitae
Yousef Mohamed Yousef ElBaradei is an automation engineer seeking a position that allows him to utilize his skills and continue developing professionally. He has a post-graduate diploma in computer control engineering and a bachelor's degree in electrical engineering from Menofia University. His skills include designing automation systems using Siemens software, installing PLCs, HMIs, and SCADA systems, networking industrial control systems, and troubleshooting various hardware and software issues. He has experience as an automation engineer and installation engineer for several companies, working on projects involving PLCs, SCADA, instrumentation, and more.
CV 2016 SALAH
Salah Mohamed Mohamed Ibrahim Taman is currently the Head Manager of the Instrumentation and Control Department at ELDelta Co. for Fertilizers Chemical Industries in Egypt. He has over 20 years of experience in instrumentation, control systems, electronics, networking and communication engineering. He received a B.Sc. in Electronics Engineering from Mansoura University in Egypt, specializing in computers and control systems. He has extensive experience working with DCS, PLC, SCADA and other process control systems. He also has skills in maintenance, calibration, programming and troubleshooting of various field instrumentation.
Cv modifeid final version
Najeeb-ur-Rehman is an industrial electronics engineer with over 5 years of experience seeking a mid to senior level position. He has a B.E. in Electronics and is currently pursuing an M.E. in Industrial Electronics. He is currently working as a senior electrical/electronics engineer at General Tyre And Rubber Company where he is responsible for plant maintenance, improvements, troubleshooting electrical problems, and health and safety. Prior to this, he worked as an electronic engineer at Danpak Food Industry where he maintained and repaired food processing equipment. He has expertise in PLCs, drives, HMIs, troubleshooting, and design.
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
Allwin21 Corp. has been focusing on providing solutions and enhancements to plasma Etch RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been Process-Proven. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid 3-axis robotic wafer transfer system, and new critical components to achieve the goal of giving our customers a production edge.
Please help fill in the RFQ at our website for suitable model and configuration for your applications. Appreciate your time.
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
SPIE Automation Solutions for Steel Industry
Automation, Electric Arc Furnace, Ladle Furnace, Electrode Regulation, Electrode Regulator, Control Systems, Melting Shops, EAF, LF
SPIE Automation Solutions for Steel Industry
Automation, Electric Arc Furnace, Ladle Furnace, Electrode Regulation, Electrode Regulator, Control Systems, Melting Shops, EAF, LF
sobhycv
Mohamed Sobhy Ahmed is an Instrument and Control Engineer seeking a challenging position. He has over 20 years of experience in power stations and currently works as a Senior I&C Engineer at a 2*364MW Steam Power Station in Egypt. He has extensive experience with distributed control systems including Bailey INFI90, Power Alspa P320, and Toshiba tosmap.
sayed bessat cv last rev (2)
1) Sayed Bessat Eid El kady is an Egyptian instrumentation and control engineer with over 15 years of experience working in power plants.
2) He has worked on numerous projects in Egypt and Saudi Arabia, holding positions like I&C commissioning engineer, instrument maintenance engineer, and construction engineer.
3) His experience includes working with control systems from companies like Siemens, GE, Alstom, and Emerson, as well as instrumentation including transmitters, valves, vibration monitoring, and DCS.
Siemens simatic st 70 news 2006, simatic s7
Siemens,
Catalog Thiết Bị Tự Động Siemens,
Catalog Phụ Kiện Siemens,
Catalog Siemens,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Setpoint Process Automation Overview
This document summarizes Setpoint Integrated Solutions, a company that provides process automation solutions. It states that Setpoint's mission is to be a premier process solutions partner by bringing together industry expertise and world-class products into fully integrated solutions. Setpoint has engineers, technicians, and subject matter experts to ensure customer automation needs are fully realized and supported throughout projects. It also provides state-of-the-art training facilities and an integrated technology center for hands-on experience with new technologies.
CAM Tools_Presentation_18.07.2015
CAM Tools provides precision molds, tooling, and molding services. It has capabilities in mold design, manufacturing, trials, and part assembly. Key services include product design, prototyping, precision mold production, and injection molding. CAM Tools has 40 employees and facilities of 7,800 square feet including CNC machines, EDM machines, and a 550-ton injection molding machine for trials. It serves industries such as automotive, medical, electrical, and aerospace.
Resume
Mohammed Abdou Helal is seeking a position as an instruments and automation engineer with over 12 years of experience in instrumentation, control systems, and project management. He has extensive skills in DCS, PLC, SCADA systems, field instruments, control valves and loops. His career includes roles with Kindasa Water Services, RIO Trading, and Delta Fertilizers where he maintained, calibrated and troubleshot various control systems, analyzers and field devices.
Nagy_CV_Docx
Nagy Ibraheem Abo El-Khair is an automation engineer with over 10 years of experience working with Schneider Electric and other companies. He has extensive experience designing, implementing, and commissioning control systems using PLCs and HMIs from manufacturers such as Siemens, Omron, Schneider Electric, and Wonderware. Nagy has managed numerous process automation projects in various industries and countries, specializing in fire and gas safety systems. He is proficient in electrical and automation engineering, project management, and multiple programming languages.
Mohamed Zakaria 01-2017
Mohamed Zakaria Kamel is an Automation and Control Engineer seeking a new role. He has over 7 years of experience working with Siemens automation systems, including designing, installing, and commissioning PLC, HMI, and SCADA systems. He has a B.Sc. in Electrical Engineering and is proficient in Siemens Step 7, TIA Portal, WinCC, and AutoCAD.
Nagy_CV_Docx
Nagy Ibraheem Abo El-Khair is a control systems engineer with over 10 years of experience in automation projects. He has extensive experience designing and implementing safety instrumented systems using Triconex and Trident controllers. Some of his project experience includes fire and gas, ESD, and shutdown systems for oil and gas facilities in Qatar, Saudi Arabia, and Egypt. He is proficient in automation software like TriStation 1131, InTouch, and various PLC platforms.
CV_Sandeep Anugade
This document contains a resume for Sandeep L. Anugade, an automation professional with over 10 years of experience in hardware engineering, designing, commissioning, and executing automation projects for various industrial domains. It lists his technical skills and experience programming PLCs from Siemens and Allen-Bradley, along with HMIs, drives, and other industrial software. It also provides details on several automation projects he has worked on, including for power plants, hydroelectric plants, and automotive manufacturing facilities.
BEAMIT aeronautics
Beamit Group is a leading additive manufacturing company with over 50 materials, 5 plants, and 65 machines. In 2019, Sandvik Group acquired a stake in Beamit. Beamit aims to provide a fully integrated value chain for additive manufacturing, including powder production, design and simulation, printing, heat treatment, machining, inspection, and more. Beamit has various innovations like its μ-LITE digital surface finishing and HYPER advanced heat treatment. It also has patented alloys and a process for embedding sensors in 3D metal parts. Going forward, Beamit plans to further digitally integrate its supply chain and expand geographically through acquisitions.
BEAMIT aeronautics final
BEAMIT Group is a leading additive manufacturing company with over 50 materials, 5 plants, and 65 machines. In 2019, Sandvik Group acquired a stake in BEAMIT. BEAMIT aims to provide a fully integrated value chain for additive manufacturing, including powder production, design and simulation, printing, heat treatment, machining, inspection, and more. The company has various innovations like its μ-LITE digital surface finishing and HYPER advanced heat treatment. Going forward, BEAMIT plans to further digitally integrate its supply chain and expand geographically through acquisitions.
Cpu226
The document provides an overview of Siemens' products for automation and drives. It introduces their Totally Integrated Automation and Totally Integrated Power platforms which integrate planning, configuration, products, systems, and communication across industrial automation and building technology. The catalog then summarizes some of their key products, including the LOGO! logic module for simple control tasks, the SIMATIC S7-200 Micro PLC, and the SIMATIC S7-300 modular and expandable PLC system.
Skn Electronics presentation
SKN Electronics is a contract electronics manufacturer located in Birmingham, UK that has been in business since 1986. They have a 13,000 square foot facility with 50-55 employees. They specialize in surface mount technology and have automatic and manual assembly lines. Their customers are in various sectors including telecommunications, automotive, security, and more.
Similar to CV englais (20)
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
CV englais
- 1. NADJIB CHERAIT Algerian nationality. Office address: N °32 gouasmi amar ANNABA ALGERIE Mobile +213 50531271 cherait karim@yahoo.fr 2007-2008 Equipment & Controls Africa (Pittsburg USA) Project Engineer Automation and instrumentations Techno-commercial engineer Elaboration of technical and commercial bids for : System testing command DCS Programmable logic controller Proposed materials DeltaV Emerson Fisher Rosemount instrumentation Fisher valve study and engineering of detections systems and fire extinguishing Proposed materials Fenwal, Det-Tronics fire detection and extinguishing CURRICULUM VITAE
- 2. 2000-2007 7 YEARS SIDER AUTOMATION OF GROUP SIDER ANNABA Section Chief of Operation Dept Automation and instrumentations department Project Engineer Automation and instrumentations and caring out. Mittal steel Company, Annaba City o Unite Hot laminar: metal hot rolling LAC. o Unite cold laminar: metal cold rolling.LAF o Unite oxygen central, azot, argon COX o Pipe test rig 500 t TSS o Unite metal oxygen cutting N 1-2 ACOI-II Ethylene ENGI Skikda Industrial oil refinery ENCG ORAN Glass trade of composition shop CHLEF Cleaning in place CIP dairy Constantine Instrumentation acquisition water/milk temperature and level dairy Annaba 14 YEARS OF INDUSTRIAL PROFESSIONAL EXPERIENCE
- 3. 1998-2000 2 YEARS Chief engineer Automation and Maintenance Dept of Sider Automation Company This department included all automation, programmation, regulation, troubleshooting and new automation system and instrumentation. 1993-1998 5 YEARS Section Chief, for the process computer Dept at Sider plant. This service included all industrial automation, programmation, maintenance (working on telemecannique, Schneider, Siemens, Leeds, Endress+Hauser systems). Automation Supervisor Engineer for the Start Up and Commissioning of a DCS System (Max-1) and field instrument for the different units of the plant. Supervision and maintenance systems : Micro max Leeds Max-1 Leeds Video micon Schneider Siemens COMPUTING AND AUTOMATION KNOWLEDGE
- 4. Programmation Language : Pascal. Visual basic Control-Command : Telemecanique 27-10-20, 47 411-415-420-620 Schneider premium 50-m103 Siemens s7-300 s7-400. Software : Telemecanique pl7-2-3, Xbtl150 Schneider pl7-pro, vijeo look, monitor pro, Xbtl1000, OFS-OPC Siemens step5/step 7/HDMI, protocol/pro Instrumentation : Endress+Hauser, Telemecanique, Siemens, Valves Samson, Hart instrumentation, Analogic Transmitter Operating systems : Windows XP/seven/8, Windows 98, Windows NT, Office 2003/2007/2010 Networks; Ethernet, Control Net. OPC-Ofs Modbus, Profibus DP, Fipway.
- 5. Automation Engineer 1986-1991 University Sidi amar Annaba (BAC+5) DeltaV (2007) Instrumentation Endress+Hauser, Viga (2004) DCS Siemens PCs7 (2003) Windows NT Network. Ethernet ( 2002) PLC Telemecanique ,Siemens, Schneider (1998) French good level English medium Tennis: beach, swimming, cinema, music Travel: France, Italia, morocco, Tunisia, Gabon: DEGREE ADDITIONAL TRAINING LANGUAGE PROFICIENCY MISCELLENEOUS