Presented by Roberto Magliulo of CTPOPtotec during the GlobalChannelPartnersForum 2015 @ Graph Expo, Chicago

1. The easy
innovation

2. The story of CtpOptotec
 2006: born of project «Ctp One» S1
 2008 first presence at Drupa
 2011 born of S2 second generation of Ctp One
 2012 second presence at Drupa
 2015 acquisition CtpOptotec by

3. Versatility: a big
opportunity
The print market
needs versatility.
The more you give,
the better your
customers are
satisfied
Ctp One®: many
functions and uses

5.  Thermal CTP plates for waterless offset printing
 Supported plate types include: Toray TAC, Presstek PearlDry, Zahara
 Available resolutions: 2540 / 7620 dpi
 Max. output for 4-page format: 41 plates / hour
 Application range: Waterless offset printing, label printing, printing on
non-absorbent plastics, security printing, plastic card printing, etc
 Thermal CTP plates for conventional offset printing
 Printing plates: any thermal plate for 830 Nm
 Available resolutions: 2540 / 7620 dpi
 Max. output for 4-page format: 41 plates / hour
 Thermal IR films
 Supported film types include: Kodak DITR Film
 Required resolution: 7620 dpi
 Max. output for 4-page format: 6 films / hour
 Application range: Screen printing films, films for analogue
Flexo and Letterset plates, films for tampon printing plates,
analogue plate copy, embossing films.

6.  Digital CTP varnishing plates
 Supported plates include: Toyobo, Toray
Torelief, Nyloprint
 Required resolution: 7620 dpi
 Max. output for 4-page format: 6 films / hour
 Application range: coating units
 Digital CTP letterset plates
 Supported plates include: Toyobo,Toray Torelief, Nyloprint
 Required resolution: 7620 dpi
 Max. output for 4-page format: 6 plates / hour
 Application range: Indirect and direct letterpress printing
(Letterset), coating units
 Digital CTP flexo plates
 Supported plates include: Toyobo, Toray Torelief, Nyloprint
 Required resolution: 7620 dpi
 Max. output for 4-page format: 6 plates / hour
 Application range: Flexo printing, coating units

8. Multiple Laser Module
 Performance Improvement
 Our patented method (EP2392462) allows us to put two heads
side by side
 The MLM improves the productivity of almost 100% using 128
instead of 64 laser channels.
 This configuration enables us to increase the productivity on allall
allowable plate sizesallowable plate sizes, without drawbacks.

9. Laser UV
 Easy upgrade from thermal technology to UV
 High reliability and replaceability of every single diode
 Upgradable up to 64 diodes
 Chance to use the cheapest plates in the market
 The best value for money

10. Flexo Print Improvements
 Through our UV laser, due to its high emitting power
(10.000 mW), it will be possible to print directly on flexo
plates, avoiding the masking process.
 Advantages:
 Increasing of printing quality
 Time savings thanks to the reduction of the printing process

11. Thanks
Roberto Magliulo
Chairman
www.ctpoptotec.com
sales@ctpoptotec.com