The CPM-700 Deluxe is a portable device that can detect and locate electronic surveillance devices like bugs and transmitters up to 12 GHz. It responds to RF, carrier current, and infrared transmitters, as well as acoustic leakage. The device comes with a variety of probes and accessories to detect different types of transmitters and evaluate structures for audio leakage vulnerabilities.
Instrumentation: Test and Measurement Methods and Solutions - VE2013Analog Devices, Inc.
ย
Tilt Measurement: Tilt measurement is fast becoming a fundamental analysis tool in many fields including automotive, industrial, and healthcare. Navigation, vehicle dynamic control, building sway indication, and motion detection systems all rely on this simple, cheap, and precise way of angle monitoring. MEMS accelerometers are better suited to inclination measurement than other methodologies. This session will address the challenges encountered when designing a dual-axis tilt sensor using a MEMS accelerometer including measurement resolution, signal conditioning, single- vs. dual-axis, angle computation, and calibration.
Impedance Measurement: The measurement of complex impedance is widely used across industrial, commercial, automotive, healthcare, and consumer markets, and can include applications such as proximity sensing, inductive transducers, metallurgy and corrosion detection, loudspeaker impedance, biomedical, virus detection, blood coagulation factor, and network impedance analysis. This session will cover the concepts, approaches, and challenges of performing complex impedance measurements and will present a system-level solution for impedance conversion.
Weigh Scale Measurement: Most common industrial weigh scale applications use a bridge-type load-cell sensor, with a voltage output that is directly proportional to the load weight placed on it. This session examines the basic parameters of a bridge-type load-cell sensor, such as the number of varying elements, impedance, excitation, sensitivity (mV/V), errors, and drift. It will also discuss the various components of the signal conditioning chain and present solutions with high dynamic range.
Instrumentation: Test and Measurement Methods and Solutions - VE2013Analog Devices, Inc.
ย
Tilt Measurement: Tilt measurement is fast becoming a fundamental analysis tool in many fields including automotive, industrial, and healthcare. Navigation, vehicle dynamic control, building sway indication, and motion detection systems all rely on this simple, cheap, and precise way of angle monitoring. MEMS accelerometers are better suited to inclination measurement than other methodologies. This session will address the challenges encountered when designing a dual-axis tilt sensor using a MEMS accelerometer including measurement resolution, signal conditioning, single- vs. dual-axis, angle computation, and calibration.
Impedance Measurement: The measurement of complex impedance is widely used across industrial, commercial, automotive, healthcare, and consumer markets, and can include applications such as proximity sensing, inductive transducers, metallurgy and corrosion detection, loudspeaker impedance, biomedical, virus detection, blood coagulation factor, and network impedance analysis. This session will cover the concepts, approaches, and challenges of performing complex impedance measurements and will present a system-level solution for impedance conversion.
Weigh Scale Measurement: Most common industrial weigh scale applications use a bridge-type load-cell sensor, with a voltage output that is directly proportional to the load weight placed on it. This session examines the basic parameters of a bridge-type load-cell sensor, such as the number of varying elements, impedance, excitation, sensitivity (mV/V), errors, and drift. It will also discuss the various components of the signal conditioning chain and present solutions with high dynamic range.
This session combines the high speed analog signal chain from RF to baseband with FPGA-based digital signal processing for wireless communications. Topics include the high speed analog signal chain, direct conversion radio architecture, the high speed data converter interface, and FPGA-based digital signal processing for software-defined radio. The demo board uses the latest generation of Analog Devicesโ high speed data converters, RF, and clocking devices, along with the Xilinx Zynq-7000 SoC. Other topics of discussion include the imperfections introduced by the modulator/demodulator with particular focus on the effect of temperature and frequency changes. In-factory and in-field algorithms that reduce the effect of these imperfections, with particular emphasis on the efficacy of in-factory set-and-forget algorithms, are examined.
The A75x series offers simplicity and reliability in a point to point wireless system. The A753 transmitter and A750 receiver transmit a 4-20mA, thermocouple, or RTD signal and two dis- crete (switch) inputs. Switch inputs can be wet or dry. One A753 transmitter can communicate with multiple A750 receiv- ers for redundancy. A repeater can be added simply by placing in between transmitter and receiver, no programming required. Three radio options are available: long range 900MHz 1W, 900MHz 50mW and 2.4GHz 63mW. The A753 can operate in multipoint mode when coupled with the A750-MOD receiver. Analog and digital inputs and outputs are expandable at both the transmitter and receiver utilizing A0000 modules and AnaBus.
International Fiber Systems 350A1-R-R/1BAP Data SheetJMAC Supply
ย
Buy the International Fiber Systems 350A1-R-R/1BAP at JMAC Supply.
https://www.jmac.com/IFS_International_Fiber_Systems_350A1_R_R_1BAP_p/ifs-350a1-r-r-1bap.htm?=slideshare
zBoost creates an indoor cell zone (quantum-wireless.com)Ari Zoldan
ย
Boosts indoor signal up to 10,000 square feet!
Works with all U.S phones, smart phones, and wireless data cards.
Supports multiple users simultaneously.
Improves battery life.
1 year manufacturer warranty.
This session combines the high speed analog signal chain from RF to baseband with FPGA-based digital signal processing for wireless communications. Topics include the high speed analog signal chain, direct conversion radio architecture, the high speed data converter interface, and FPGA-based digital signal processing for software-defined radio. The demo board uses the latest generation of Analog Devicesโ high speed data converters, RF, and clocking devices, along with the Xilinx Zynq-7000 SoC. Other topics of discussion include the imperfections introduced by the modulator/demodulator with particular focus on the effect of temperature and frequency changes. In-factory and in-field algorithms that reduce the effect of these imperfections, with particular emphasis on the efficacy of in-factory set-and-forget algorithms, are examined.
The A75x series offers simplicity and reliability in a point to point wireless system. The A753 transmitter and A750 receiver transmit a 4-20mA, thermocouple, or RTD signal and two dis- crete (switch) inputs. Switch inputs can be wet or dry. One A753 transmitter can communicate with multiple A750 receiv- ers for redundancy. A repeater can be added simply by placing in between transmitter and receiver, no programming required. Three radio options are available: long range 900MHz 1W, 900MHz 50mW and 2.4GHz 63mW. The A753 can operate in multipoint mode when coupled with the A750-MOD receiver. Analog and digital inputs and outputs are expandable at both the transmitter and receiver utilizing A0000 modules and AnaBus.
International Fiber Systems 350A1-R-R/1BAP Data SheetJMAC Supply
ย
Buy the International Fiber Systems 350A1-R-R/1BAP at JMAC Supply.
https://www.jmac.com/IFS_International_Fiber_Systems_350A1_R_R_1BAP_p/ifs-350a1-r-r-1bap.htm?=slideshare
zBoost creates an indoor cell zone (quantum-wireless.com)Ari Zoldan
ย
Boosts indoor signal up to 10,000 square feet!
Works with all U.S phones, smart phones, and wireless data cards.
Supports multiple users simultaneously.
Improves battery life.
1 year manufacturer warranty.
Moore Industries is proud to announce the new SFY Functional Safety Frequency-to-DC Transmitter with display including SIL 3 capability. The 2-wire (loop-powered) SFY is ideal for use in your Safety Instrumented System (SIS) in a wide range of process and factory automation monitoring applications and as part of the FS Functional Safety Series providing reliable and accurate monitoring of frequency or pulse signals in SIS. The SFY is approved for single use in SIS up to SIL 2 and in a redundant architecture (1oo2, 2oo3, etc.) up to SIL 3.
Site hawk is Best Cable Analyzer And Antenna Analyzer - Site Hawk AnalyzerAimil Ltd
ย
Analyze cable and antennas with analyser device Site Hawk Analyzer. Determine early faults in cables with site hawks. Model number - SiteHawk Analyser - SK-4000-TC, SK-200-TC. Applications are Worldwide Cellular, PCS/DCS, CDMA, GSM, LTE Protocols, 3G, Broadcast, Government, and Tactical Military, Microwave, Paging, Public Safety, Trunking, WLAN, TETRA, WLL
The microBloxโข (uB) family of analog I/O modules and back-panel carriers offer a modern and flexible space-saving
solution for isolating and monitoring common analog industrial I/O signals for interface with industry-standard analog
data acquisition systems. Although smaller than their analog counterparts, microBloxโข modules include a digital
interface, 16-bit A/D & D/A conversion, plus optional support for Bluetooth wireless technology re-programmability and
recalibration.
A full line of microBloxโข isolated signal conditioning modules are now available from Acromag. microBloxโข uB Signal Conditioning ModuleOffering over 175 models, microBlox uB modules can safely interface a wide variety of voltage, current, temperature, frequency, and other field signals with a ยฑ5V or 0-5V DC output to host measurement & control systems. Users can select modules with fixed ranges or wireless configuration via Bluetoothยฎ wireless technology on an Androidโข or iOSยฎ mobile device.
1. CPM-700 DELUXE
Detect & locate electronic surveillance devices...
Such as room, phone, and body bug transmitters, up to 12 GHz! The CPM-700 Deluxe
responds to RF, carrier current, and infrared transmitters, as well as acoustic leakage.
Research Electronics Intlยฎ
TECHNICAL SECURITY SPECIALISTS
455 Security Place โข Algood, TN 38506 USA โข TEL +1 931.537.6032
800.824.3190 (US ONLY) โข FAX +1 931.537.6089 โข www.reiusa.net
ยฉ Copyright Research Electronics International 2009
* Product specifications and descriptions subject to change without notice.
โข Detect and locate sophisticated eavesdropping
transmitters (digital & analog) including RF (audio, video,
data, etc), Infrared, and Carrier Current transmitters.
โข Test telephones and miscellaneous wiring for โhot mics,โ
hookswitch bypass, and โinfinityโ bugs with the Amplified
Audio Auxiliary Input (100dB of gain).
โข Evaluate structure bound audio leakage integrity (walls,
glass, etc.) and vulnerability against laser listening
devices using the active Acoustic Leakage Probe.
โข Detect low power transmitters using active probes with
built-in pre-amps for increased sensitivity.
โข Wide Band Coverage - from 15kHz to 12GHz.
1 2 3 4 5 6 7
8 9 10 11 12
1. PHONES
Headphone output for silent operation,
disconnects internal speaker.
2. AUDIO GAIN
Controls the audio gain (volume) to the speaker
or headphone output.
3. THRESHOLD
Sets the trip point for the Monitor mode.
4. ALERT LED
Flashes red when input level exceeds trip point
of Monitor mode.
5. INPUT LEVEL
Bar graph indicates signal strength of Probe or
Auxiliary inputs.
6. PULSING SEGMENT
Indicates alarm trip point in the Monitor mode,
activates Alarm and Remote output.
7. PROBE INPUT
Provides input and power for active probes.
8. FILTER
Audio filter used to accentuate voice
frequencies and remove noise.
9. MODE
Search or Monitor mode is for performing a
sweep. Monitor mode sets the Alarm.
10. ALERT
Selects either audible Tone alarm or Silent
flashing LED output from Monitor mode.
11. STATUS DISPLAY
Shows unit operating conditions made by
button selections.
12. PROBE GAIN
Adjusts the internal sensitivity of the Detector
and Audio systems.
COUNTERSURVEILLANCE PROBE/MONITOR
Up to 12GHz
Professional TSCM Tools in a Portable Sweep Kit
2. ยฉ Copyright Research Electronics International 2009
CPM-700 DELUXE Accessories
BROADBAND MICROWAVE PROBE
Directional probe detects
modern surveillance devices
including frequency hopping
transmitters up to 12GHz.
Frequency Response:
2GHz - 12GHz ยฑ3dB
Antenna Gain: 7dB Nominal
Sensitivity: -65dBm (1 segment)
Audible Sensitivity: -70dBm
Min. Discernible Signal Level (MDSL)
RF SNIFFER PROBE
ACOUSTIC LEAKAGE PROBE
Probe for use in RF rich envi-
ronments where the standard
probe may be oversaturated.
Frequency Response:
10MHz - 3GHz
Preamp Gain: 20dB Nominal
Sensitivity:
-35dBm (8cm from target)
Audible Sensitivity:
-55dBm (8cm from target) MDSL
Evaluates structure bound acous-
tic leakage (walls, windows, etc.)
Frequency Response:
50Hz - 10kHz (surface dependant)
Impedance: 47K Ohm
STANDARD RF PROBE
MODULAR PHONE ADAPTER
AUDIO AUXILIARY INPUT
Nearfield Active RF Probe for
locating transmitters up to
3GHz.
Frequency Response:
50kHz - 3GHz ยฑ3dB
Preamp Gain: 20dB Nominal
Sensitivity: -62dBm (1 segment)
Audible Sensitivity:
-85dBm MDSL
INFRARED PROBE
Frequency Response:
10kHz - 5MHz
Wavelength: 725 - 1150nM
Viewing Angle: ยฑ40 deg
VLF CARRIER CURRENT PROBE
Frequency Response:
15kHz - 2.5MHz ยฑ3dB
Sensitivity: -38dBm (1 segment)
Audible Sensitivity: -50dBm MDS
Max Input Voltage:
300VAC 50 - 60Hz
Allows easy access to phone
and network wiring to test
for transmitting surveillance
devices.
CIGARETTE LIGHTER ADAPTER
PATCH CORDS
NiMH BATTERIES
Provides 12VDC power from
automobile socket.
Used to test miscellaneous
wiring and to connect the
CPM-700 to a tape recorder for
recording audio output.
2300 mAh (8 qty.):
8 - 12 hours per charge
Recharge Time: 6 - 8 hours
Input Impedance: 50K ฮฉ
AGC Dynamic Range:
110dB 3ยตV - 1V p-p
Frequency Response:
100Hz - 15kHz ยฑ3dB
(filtered 500Hz - 2.5Khz)
CARRYING CASE
Size: 18.5 in x 6 in x 14.5 in
(47 cm x 15.3 cm x 36.8 cm)
Weight:
10.3 lbs (4.7 kg) with all items
CPM-700 DELUXE
Provides a wide range of professional
countersurveillance tools in an easy-to-use portable kit.
RECORD OUTPUTHEADPHONE OUTPUT
Record Out:
25mV p-p nominal with AGC
Headphone Output:
5V p-p 220ฮฉ
The CPM-700 is available in multiple package configurations depending on user needs.
Contact REI for the package that best meets your needs.
* The effectiveness of any surveillance countermeasure is dependent on the threat level and the userโs ability to properly
deploy the appropriate countermeasure. Product specifications and descriptions subject to change without notice.