Cost effective link building becomes a piece of cake 1
•
0 likes•88 views
Link Liberation is a link building course offered by Dan Thies, it's The secret to getting more links that can be summed up in one word: Leverage!
Report
Share
Report
Share
Download to read offline
Recommended
Cost-effective Green Building Design and Construction
SunSource Homes Inc. increases the efficiency of your building by improving its architectural design. Visit http://www.sunsourcehomes.net/ to find more ideas on green building designs.
Natural building 1
The document describes how earth ships use recycled materials, solar and thermal energy, water harvesting, wastewater treatment, and food production. Specifically, it discusses using tires, cans, bottles for construction materials. It also explains how earth ships use solar and thermal energy for heating, cooling, and electricity. Additionally, it covers harvesting water and treating wastewater on site. Finally, it mentions using the structures for food production.
Natural building in permaculture systems
Natural building architectural styles and techniques: cob, clay straw, strawbale, rammed earth, timber frame, stone, etc.
Laurie Baker
Laurie Baker was a British-born Indian architect known for his cost-effective and sustainable designs. He lived and worked in India for over 50 years, designing many low-cost homes and buildings using local materials. His work emphasized passive climate control, maximizing natural light and ventilation, and reusing salvaged materials. Notable projects included fishermen's villages, institutional buildings for the Centre for Development Studies, and churches that demonstrated his unique style of organic architecture suited to local needs.
Materials Matter - Construction Materials and their Environmental Costs
This presentation will show how the life cycle assessment makes it easier for architects to incorporate environmental considerations into their building material selection. It will discuss the life cycle impacts of wood, concrete and steel and demonstrate that over its life cycle, wood is better for the environment than steel or concrete in terms of embodied energy, air and water pollution and greenhouse gas emissions. In addition, this presentation will highlight the advances each industry is making toward sustainability.
Recycle material used in road construction
As the world population grows, so do the amount and type of waste being generated.Many of the waste produced today will remain in environment.The creation of non decaying waste material, combined with a growing consumer population, has resulted in a waste disposal crisis.
One solution to this crisis lies in recycling waste into useful products.
It is try to match society need for safe and economic disposal of waste material with highway industry need for better and more cost effective construction material.
Cost effective roofs
This document discusses various types of roof coverings and structures, including:
- Earth reel roofs which use reels made of rolled vegetation fibers and clay around a wooden spindle.
- Clay tile roofs which are suitable for sloping roofs between 20-50 degrees and come in shapes suited to different slopes.
- Ferrocement, fibre concrete, and corrugated metal sheet roofing.
- Pole timber roof structures which use whole roundwood poles rather than sawn timber, reducing costs and waste. Connections can be made with dowels or bolts.
- Space frame structures made of short pole timber segments connected by steel connectors for large covered areas.
Low cost houisng and alternate building materials
This document summarizes a presentation on using prefabricated and alternate building materials for low-cost housing. Some key points:
- Prefabricated components like precast concrete planks, panels, and lintels can reduce construction costs by eliminating shuttering and scaffolding. Standardizing components increases speed and productivity.
- Alternate materials like fly ash bricks, hollow concrete blocks, and lime can also reduce costs when used for walls. Larger wall blocks use less mortar.
- A demonstration housing project in Bangalore used materials like solid concrete blocks, RCC slabs, and precast doors to build 252 units for Rs. 60,000 each. Overall costs were reduced by 30-50
Recommended
Cost-effective Green Building Design and Construction
SunSource Homes Inc. increases the efficiency of your building by improving its architectural design. Visit http://www.sunsourcehomes.net/ to find more ideas on green building designs.
Natural building 1
The document describes how earth ships use recycled materials, solar and thermal energy, water harvesting, wastewater treatment, and food production. Specifically, it discusses using tires, cans, bottles for construction materials. It also explains how earth ships use solar and thermal energy for heating, cooling, and electricity. Additionally, it covers harvesting water and treating wastewater on site. Finally, it mentions using the structures for food production.
Natural building in permaculture systems
Natural building architectural styles and techniques: cob, clay straw, strawbale, rammed earth, timber frame, stone, etc.
Laurie Baker
Laurie Baker was a British-born Indian architect known for his cost-effective and sustainable designs. He lived and worked in India for over 50 years, designing many low-cost homes and buildings using local materials. His work emphasized passive climate control, maximizing natural light and ventilation, and reusing salvaged materials. Notable projects included fishermen's villages, institutional buildings for the Centre for Development Studies, and churches that demonstrated his unique style of organic architecture suited to local needs.
Materials Matter - Construction Materials and their Environmental Costs
This presentation will show how the life cycle assessment makes it easier for architects to incorporate environmental considerations into their building material selection. It will discuss the life cycle impacts of wood, concrete and steel and demonstrate that over its life cycle, wood is better for the environment than steel or concrete in terms of embodied energy, air and water pollution and greenhouse gas emissions. In addition, this presentation will highlight the advances each industry is making toward sustainability.
Recycle material used in road construction
As the world population grows, so do the amount and type of waste being generated.Many of the waste produced today will remain in environment.The creation of non decaying waste material, combined with a growing consumer population, has resulted in a waste disposal crisis.
One solution to this crisis lies in recycling waste into useful products.
It is try to match society need for safe and economic disposal of waste material with highway industry need for better and more cost effective construction material.
Cost effective roofs
This document discusses various types of roof coverings and structures, including:
- Earth reel roofs which use reels made of rolled vegetation fibers and clay around a wooden spindle.
- Clay tile roofs which are suitable for sloping roofs between 20-50 degrees and come in shapes suited to different slopes.
- Ferrocement, fibre concrete, and corrugated metal sheet roofing.
- Pole timber roof structures which use whole roundwood poles rather than sawn timber, reducing costs and waste. Connections can be made with dowels or bolts.
- Space frame structures made of short pole timber segments connected by steel connectors for large covered areas.
Low cost houisng and alternate building materials
This document summarizes a presentation on using prefabricated and alternate building materials for low-cost housing. Some key points:
- Prefabricated components like precast concrete planks, panels, and lintels can reduce construction costs by eliminating shuttering and scaffolding. Standardizing components increases speed and productivity.
- Alternate materials like fly ash bricks, hollow concrete blocks, and lime can also reduce costs when used for walls. Larger wall blocks use less mortar.
- A demonstration housing project in Bangalore used materials like solid concrete blocks, RCC slabs, and precast doors to build 252 units for Rs. 60,000 each. Overall costs were reduced by 30-50
Building Materials And Construction - steel interiors
This document discusses the use of steel and stainless steel in building construction. It provides details on:
- Steel is commonly used as the structural skeleton of buildings to hold everything up and together. Stainless steel is an alloy of iron and chromium that is corrosion resistant and attractive.
- Stainless steel has various properties including malleability, ductility, elasticity, hardness, and conductivity that make it useful for building interiors.
- Examples of interior uses of steel include ceilings, walls, kitchen interiors, flooring, furniture, staircases, and fireplaces. Various finishes can be applied to stainless steel like brushed, polished, patterned, and decorative finishes.
Advanced Building Materials
The document provides an introduction to advanced building materials. It discusses how materials are becoming more intelligent, interactive and responsive. It then classifies advanced building materials into intelligent materials that can sense and respond on their own, and interactive materials that require external commands to function. The document lists several material trends and properties of advanced materials, and outlines the aims and scope of studying these materials for sustainable construction. It provides examples of specific advanced materials like aerogel, lotusan paint and others, describing their composition, characteristics and applications.
Filler Slab Roofs
Many building materials are used for construction and different methods are followed. Each of these building materials has a unique embodied energy. Out of these materials, Roofing material constitute one of the major energy consuming components of the building. Effective utilization of available energy and its conservation is global challenge. For a developing country like India, the increasing demand of energy has created a scope for the study embodied energy of alternative roofing technique and their advantages for the sustainable building construction. The total embodied energy of a building can be reduced significantly by using alternate roofing technique such as RCC Filler slab which has lower embodied energy value.
Filler slab technology is a simple and a very innovative technology for a slab construction. The filler slab is based on the principle that for roofs which are simply supported, the upper part of the slab is subjected to compressive forces and the lower part of the slab experience tensile forces. Concrete is very good in withstanding compressive forces and steel bears the load due to tensile forces. Thus the lower tensile region of the slab does not need any concrete except for holding the steel reinforcements together. Hence concrete in the bottom region of solid RCC slab is replaced by an energy efficient and cost effective material. With reduced consumption of building material for roofing, the cost of the building can be reduced predominantly.
Low Cost Housing Presentation
The document describes an alternative village housing concept that provides dignity to people. Each village contains 24 semi-detached houses sharing communal amenities including ablutions, laundry, recycling, and gardens powered by solar energy. The village aims to provide permanent housing through off-grid and sustainable infrastructure like solar power, hot water, grey water harvesting and organic food gardens. The goal is to develop rural housing that does not financially burden poor rural communities.
reuse and recycle of construction material
This document discusses construction waste recycling. It notes that construction generates a significant amount of waste and that recycling can reduce environmental impacts. It identifies several materials commonly recovered from construction sites, such as asphalt, wood, gypsum wallboard, metals, concrete, brick, and roofing. Recycling these materials provides benefits like reducing pollution, conserving landfill space and resources, and creating jobs. However, barriers to recycling include a lack of facilities, technologies, awareness, and proper waste separation at job sites. The document advocates developing markets for recycled products, education and training, and policies to promote greater recycling in the construction industry.
LOW COST HOUSING
The document discusses the environmental impacts of the construction industry and proposes more sustainable alternatives. It notes that the construction industry accounts for significant global resource use and pollution. Specifically:
- It uses over one-sixth of global freshwater withdrawals and one-quarter of wood harvest. Cement production alone contributes 5% of man-made CO2 emissions.
- Construction and demolition waste makes up 10-40% of solid waste in most countries.
- Many building materials emit VOCs that contribute to greenhouse gases and global warming.
To address these issues, the document recommends more sustainable materials like hollow interlocking compressed stabilized earth blocks, which use local soil and less energy and resources compared to conventional bricks. These
13 construction material from the future
The document summarizes 13 emerging construction materials, including translucent concrete that uses glass fibers to allow light transmission, sensiTiles with embedded fiber optics that twinkle as people walk on them, and electrified wood that incorporates wiring to power devices. It also discusses flexible honeycomb structures, paper-based countertops, self-repairing cement with microcapsules that seal cracks, strong yet lightweight carbon fiber, and bendable concrete reinforced with fibers.
Innovative Building Materials
This document presents an overview of innovative building materials being researched and developed. It describes 16 new materials including translucent concrete made with optical fibers, sensi tiles that guide light through floors, radiant barriers for insulation, solar panel roofing tiles to generate electricity, and ultra touch jeans insulation made from recycled denim. Other materials discussed are electrified wood, flexicomb honeycomb structures, kinetic glass that opens and closes, unfired clay bricks, richlite made from recycled paper, carbon fiber, self-repairing cement, liquid granite, and bendable concrete reinforced with fibers. The conclusion states that replacing old materials with these innovations could improve recycling, save energy and resources, and make construction simpler and stronger.
Aranya Low Cost Housing
The Aranya Low-Cost Housing project in Indore, India provided serviced housing plots and infrastructure for 6,500 low-income families. The project was led by architect Balkrishna Doshi and included mixed income neighborhoods organized around a central spine. It featured a hierarchy of pedestrian-prioritized roads and distributed open spaces to improve accessibility. Climate-responsive design like north-south orientation and shared walls minimized solar heat gain. The "site and service" approach provided basic infrastructure like water, sewer, and electricity to allow residents to construct homes appropriate to their needs.
Low cost housing India
Present solutions for low cost housing in India keeping in mind speed of construction and strength of conventional buildings.
Building construction
We are also known as green smart and environment friendly builders in the area of Victoria and make available beautiful homes located in the area of Victoria.
2014.12.01 - NAEC-Strategic Foresight Workshop_Session 5_Paul Ormerod
1) The ECB Governor found conventional economic models provided limited help during the financial crisis as they failed to predict or explain what was happening.
2) He welcomed inspiration from other disciplines like physics, engineering, psychology and biology to develop new tools to improve the robustness of their framework.
3) A multi-disciplinary group at UCL is developing approaches using narratives and emotions extracted from big data sources like news to provide early warnings and better understand economic uncertainties.
5. construction equipment Building Construction
The document discusses various types of construction equipment used on building sites, including earthmoving equipment like excavators and bulldozers, construction vehicles like dump trucks and trailers, material handling equipment like cranes and forklifts, and other equipment like concrete mixers and compactors. It provides details on the purpose and function of each type of equipment, with examples of specific models within each category. The goal is to classify the wide variety of machines commonly found on construction sites based on their application and use.
low cost construction
The document proposes several low-cost construction techniques to reduce costs compared to conventional construction methods. These include using thinner foundations with rubble masonry, reducing wall thicknesses, employing rat-trap bond for walls, using concrete blocks or soil-cement blocks instead of burnt bricks, and utilizing precast components and alternative materials for doors, windows and shutters. Adopting these techniques could achieve an overall cost savings of 15-25% compared to conventional construction.
Belapur Incremental housing - A case study
The document summarizes Charles Correa's incremental housing project in CBD Belapur, India. It describes the project's low-cost housing typologies designed around communal courtyards. Housing was organized into clusters of 7-12 pairs of freestanding homes arranged around shared spaces. This allowed residents to independently modify their own homes over time. While many original structures have been replaced, the hierarchy of community spaces remains intact decades later. The project demonstrated high-density affordable housing built at a human scale with simple materials. However, maintaining common spaces and adapting to changing aspirations have presented challenges over time.
Cost effective construction techniques
The document discusses various cost-effective construction techniques that can be used in India to reduce building costs. Some techniques mentioned include using stabilized compressed earth blocks, fly ash bricks, rat-trap bond brickwork, filler slabs for roofs, and replacing concrete lintels with brick arches. Adopting these alternative materials and construction methods can save 15-40% on building costs while still providing durable structures. Proper selection of materials suited to the local area is important for developing cost-effective construction techniques.
Green Building Materials
Green building is the practice of increasing building efficiency and reducing environmental impacts. It involves using renewable materials, efficient technologies, and water and energy conservation practices. Some benefits are lower costs, improved indoor air quality, energy efficiency, and healthier lifestyles. While initial costs may be higher, there are long-term savings. In India, various agencies promote green building standards and top cities have implemented policies and codes to encourage more sustainable construction.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
More Related Content
Viewers also liked
Building Materials And Construction - steel interiors
This document discusses the use of steel and stainless steel in building construction. It provides details on:
- Steel is commonly used as the structural skeleton of buildings to hold everything up and together. Stainless steel is an alloy of iron and chromium that is corrosion resistant and attractive.
- Stainless steel has various properties including malleability, ductility, elasticity, hardness, and conductivity that make it useful for building interiors.
- Examples of interior uses of steel include ceilings, walls, kitchen interiors, flooring, furniture, staircases, and fireplaces. Various finishes can be applied to stainless steel like brushed, polished, patterned, and decorative finishes.
Advanced Building Materials
The document provides an introduction to advanced building materials. It discusses how materials are becoming more intelligent, interactive and responsive. It then classifies advanced building materials into intelligent materials that can sense and respond on their own, and interactive materials that require external commands to function. The document lists several material trends and properties of advanced materials, and outlines the aims and scope of studying these materials for sustainable construction. It provides examples of specific advanced materials like aerogel, lotusan paint and others, describing their composition, characteristics and applications.
Filler Slab Roofs
Many building materials are used for construction and different methods are followed. Each of these building materials has a unique embodied energy. Out of these materials, Roofing material constitute one of the major energy consuming components of the building. Effective utilization of available energy and its conservation is global challenge. For a developing country like India, the increasing demand of energy has created a scope for the study embodied energy of alternative roofing technique and their advantages for the sustainable building construction. The total embodied energy of a building can be reduced significantly by using alternate roofing technique such as RCC Filler slab which has lower embodied energy value.
Filler slab technology is a simple and a very innovative technology for a slab construction. The filler slab is based on the principle that for roofs which are simply supported, the upper part of the slab is subjected to compressive forces and the lower part of the slab experience tensile forces. Concrete is very good in withstanding compressive forces and steel bears the load due to tensile forces. Thus the lower tensile region of the slab does not need any concrete except for holding the steel reinforcements together. Hence concrete in the bottom region of solid RCC slab is replaced by an energy efficient and cost effective material. With reduced consumption of building material for roofing, the cost of the building can be reduced predominantly.
Low Cost Housing Presentation
The document describes an alternative village housing concept that provides dignity to people. Each village contains 24 semi-detached houses sharing communal amenities including ablutions, laundry, recycling, and gardens powered by solar energy. The village aims to provide permanent housing through off-grid and sustainable infrastructure like solar power, hot water, grey water harvesting and organic food gardens. The goal is to develop rural housing that does not financially burden poor rural communities.
reuse and recycle of construction material
This document discusses construction waste recycling. It notes that construction generates a significant amount of waste and that recycling can reduce environmental impacts. It identifies several materials commonly recovered from construction sites, such as asphalt, wood, gypsum wallboard, metals, concrete, brick, and roofing. Recycling these materials provides benefits like reducing pollution, conserving landfill space and resources, and creating jobs. However, barriers to recycling include a lack of facilities, technologies, awareness, and proper waste separation at job sites. The document advocates developing markets for recycled products, education and training, and policies to promote greater recycling in the construction industry.
LOW COST HOUSING
The document discusses the environmental impacts of the construction industry and proposes more sustainable alternatives. It notes that the construction industry accounts for significant global resource use and pollution. Specifically:
- It uses over one-sixth of global freshwater withdrawals and one-quarter of wood harvest. Cement production alone contributes 5% of man-made CO2 emissions.
- Construction and demolition waste makes up 10-40% of solid waste in most countries.
- Many building materials emit VOCs that contribute to greenhouse gases and global warming.
To address these issues, the document recommends more sustainable materials like hollow interlocking compressed stabilized earth blocks, which use local soil and less energy and resources compared to conventional bricks. These
13 construction material from the future
The document summarizes 13 emerging construction materials, including translucent concrete that uses glass fibers to allow light transmission, sensiTiles with embedded fiber optics that twinkle as people walk on them, and electrified wood that incorporates wiring to power devices. It also discusses flexible honeycomb structures, paper-based countertops, self-repairing cement with microcapsules that seal cracks, strong yet lightweight carbon fiber, and bendable concrete reinforced with fibers.
Innovative Building Materials
This document presents an overview of innovative building materials being researched and developed. It describes 16 new materials including translucent concrete made with optical fibers, sensi tiles that guide light through floors, radiant barriers for insulation, solar panel roofing tiles to generate electricity, and ultra touch jeans insulation made from recycled denim. Other materials discussed are electrified wood, flexicomb honeycomb structures, kinetic glass that opens and closes, unfired clay bricks, richlite made from recycled paper, carbon fiber, self-repairing cement, liquid granite, and bendable concrete reinforced with fibers. The conclusion states that replacing old materials with these innovations could improve recycling, save energy and resources, and make construction simpler and stronger.
Aranya Low Cost Housing
The Aranya Low-Cost Housing project in Indore, India provided serviced housing plots and infrastructure for 6,500 low-income families. The project was led by architect Balkrishna Doshi and included mixed income neighborhoods organized around a central spine. It featured a hierarchy of pedestrian-prioritized roads and distributed open spaces to improve accessibility. Climate-responsive design like north-south orientation and shared walls minimized solar heat gain. The "site and service" approach provided basic infrastructure like water, sewer, and electricity to allow residents to construct homes appropriate to their needs.
Low cost housing India
Present solutions for low cost housing in India keeping in mind speed of construction and strength of conventional buildings.
Building construction
We are also known as green smart and environment friendly builders in the area of Victoria and make available beautiful homes located in the area of Victoria.
2014.12.01 - NAEC-Strategic Foresight Workshop_Session 5_Paul Ormerod
1) The ECB Governor found conventional economic models provided limited help during the financial crisis as they failed to predict or explain what was happening.
2) He welcomed inspiration from other disciplines like physics, engineering, psychology and biology to develop new tools to improve the robustness of their framework.
3) A multi-disciplinary group at UCL is developing approaches using narratives and emotions extracted from big data sources like news to provide early warnings and better understand economic uncertainties.
5. construction equipment Building Construction
The document discusses various types of construction equipment used on building sites, including earthmoving equipment like excavators and bulldozers, construction vehicles like dump trucks and trailers, material handling equipment like cranes and forklifts, and other equipment like concrete mixers and compactors. It provides details on the purpose and function of each type of equipment, with examples of specific models within each category. The goal is to classify the wide variety of machines commonly found on construction sites based on their application and use.
low cost construction
The document proposes several low-cost construction techniques to reduce costs compared to conventional construction methods. These include using thinner foundations with rubble masonry, reducing wall thicknesses, employing rat-trap bond for walls, using concrete blocks or soil-cement blocks instead of burnt bricks, and utilizing precast components and alternative materials for doors, windows and shutters. Adopting these techniques could achieve an overall cost savings of 15-25% compared to conventional construction.
Belapur Incremental housing - A case study
The document summarizes Charles Correa's incremental housing project in CBD Belapur, India. It describes the project's low-cost housing typologies designed around communal courtyards. Housing was organized into clusters of 7-12 pairs of freestanding homes arranged around shared spaces. This allowed residents to independently modify their own homes over time. While many original structures have been replaced, the hierarchy of community spaces remains intact decades later. The project demonstrated high-density affordable housing built at a human scale with simple materials. However, maintaining common spaces and adapting to changing aspirations have presented challenges over time.
Cost effective construction techniques
The document discusses various cost-effective construction techniques that can be used in India to reduce building costs. Some techniques mentioned include using stabilized compressed earth blocks, fly ash bricks, rat-trap bond brickwork, filler slabs for roofs, and replacing concrete lintels with brick arches. Adopting these alternative materials and construction methods can save 15-40% on building costs while still providing durable structures. Proper selection of materials suited to the local area is important for developing cost-effective construction techniques.
Green Building Materials
Green building is the practice of increasing building efficiency and reducing environmental impacts. It involves using renewable materials, efficient technologies, and water and energy conservation practices. Some benefits are lower costs, improved indoor air quality, energy efficiency, and healthier lifestyles. While initial costs may be higher, there are long-term savings. In India, various agencies promote green building standards and top cities have implemented policies and codes to encourage more sustainable construction.
Viewers also liked (17)
Building Materials And Construction - steel interiors
Building Materials And Construction - steel interiors
2014.12.01 - NAEC-Strategic Foresight Workshop_Session 5_Paul Ormerod
2014.12.01 - NAEC-Strategic Foresight Workshop_Session 5_Paul Ormerod
Recently uploaded
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsPushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Recently uploaded (20)
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices