This is how to connect your PC to Internet using your Phone as Modem.
NOTE: If you are connecting using USB then you may need USB Driver for that specific phone.
If you are connecting via Bluetooth, then no need of anything.
There are two ways to connect an Epson XP-900 printer to a computer via Wi-Fi: manually or using WPS (Push & PIN). The manual method involves selecting the Wi-Fi setup option on the printer, choosing the desired Wi-Fi network from the list, entering the password, installing the printer driver on the computer, and selecting the Wi-Fi connection during installation. Alternatively, Wi-Fi Direct allows direct connection between the printer and computer by displaying the printer's Wi-Fi Direct credentials for the computer to connect to without an intermediary network. The document then offers contact information for technical assistance connecting the printer via Wi-Fi.
This document provides instructions for connecting a CCTV camera to the internet using either a WiFi or 3G connection. It lists supported WiFi and 3G modules, and provides a 3-step process for connecting via each: 1) plug in the module, 2) configure the network settings, and 3) restart and access the camera remotely using the IP address.
This document provides instructions for installing and configuring an ADSL broadband internet connection using a Huawei EchoLife HG-510 modem. The steps include physically connecting the modem to the phone line and computer, configuring the modem's network settings including entering the username and password provided by the internet service provider, and configuring the computer's TCP/IP settings. Following these steps will allow the user to establish an ADSL broadband internet connection and start browsing the web.
This document provides instructions for configuring a 3G gateway. It includes an introduction to gateways and their role in networks. It then lists the package contents and features of the gateway, including its LED indicators, browser-based configuration, and support for wireless standards. The overview section describes the gateway components. Step-by-step instructions are provided for connecting the gateway to a PC and modem, and accessing the web interface to configure the basic and security settings. Finally, contact information is given for the manufacturer.
There are two ways to connect an Epson XP-900 printer to a computer via Wi-Fi: manually or using WPS (Push & PIN). The manual method involves selecting the Wi-Fi setup option on the printer, choosing the desired Wi-Fi network from the list, entering the password, installing the printer driver on the computer, and selecting the Wi-Fi connection during installation. Alternatively, Wi-Fi Direct allows direct connection between the printer and computer by displaying the printer's Wi-Fi Direct credentials for the computer to connect to without an intermediary network. The document then offers contact information for technical assistance connecting the printer via Wi-Fi.
This document provides instructions for connecting a CCTV camera to the internet using either a WiFi or 3G connection. It lists supported WiFi and 3G modules, and provides a 3-step process for connecting via each: 1) plug in the module, 2) configure the network settings, and 3) restart and access the camera remotely using the IP address.
This document provides instructions for installing and configuring an ADSL broadband internet connection using a Huawei EchoLife HG-510 modem. The steps include physically connecting the modem to the phone line and computer, configuring the modem's network settings including entering the username and password provided by the internet service provider, and configuring the computer's TCP/IP settings. Following these steps will allow the user to establish an ADSL broadband internet connection and start browsing the web.
This document provides instructions for configuring a 3G gateway. It includes an introduction to gateways and their role in networks. It then lists the package contents and features of the gateway, including its LED indicators, browser-based configuration, and support for wireless standards. The overview section describes the gateway components. Step-by-step instructions are provided for connecting the gateway to a PC and modem, and accessing the web interface to configure the basic and security settings. Finally, contact information is given for the manufacturer.
1) Smoking is linked to tobacco and was originally used by Native Americans, but spread worldwide during imperialism as many governments relied on tobacco tax revenue.
2) Tobacco smoking causes numerous health issues like lung cancer, heart disease, and other cancers due to chemicals like tar and nicotine. It increases blood pressure and negatively impacts fetal development.
3) Tobacco kills over 6 million people worldwide annually, draining $500 billion from the global economy. Banning tobacco advertisements and prohibiting smoking in public places in many countries has helped reduce smoking, but stronger implementation of laws is still needed.
Julien LeClec'h is a 30-year-old French engineer with 8 years of experience in research, engineering, and applications roles. He has a PhD in physics and materials science. He is currently an application engineer at Synova SA in Lausanne, Switzerland. His background includes modeling, characterization, and optimization of materials, processes, and products for applications such as laser diodes. He is interested in developing new skills through diverse projects and collaborating with multidisciplinary teams.
The Chrysler Technology Center is Chrysler's main research and development facility. Located in Auburn Hills, Michigan, it employs over 2,000 engineers and scientists who work on developing new automotive technologies like electric vehicles, autonomous driving systems, and advanced safety features. Their goal is to create innovative transportation solutions that improve people's lives.
This document provides instructions for installing a 4G wireless security solution using a ZTE 4G wireless router, SIM card, Skywatch cameras, and an iPad. The setup involves inserting the SIM card into the router, connecting the cameras and power cords, powering on the extension cord to activate the router, connecting the iPad to the router's wireless network, and using the Skywatch app to view live video streams and cloud recordings from the cameras. The solution allows for wireless security monitoring without a fixed internet connection.
Alessandro Magnani, Data Scientist, @WalmartLabs at MLconf SF - 11/13/15MLconf
- Classifying products in a fast-changing environment poses challenges for accurately evaluating classification models over time. Labeling products is expensive so labels must be used optimally.
- An evaluation framework is proposed that stores the sampling profile (probability pi of each item i being selected) for labeled items. Accuracy is calculated based on these sampling probabilities to account for non-uniform sampling.
- Given an existing sampling and extra budget, new items can be sampled optimally to minimize accuracy variance while satisfying budget constraints. This allows for better reuse of existing labels over time as products and models change.
The document provides a broadband troubleshooting guide for users experiencing issues connecting to or using their Celcom broadband connection. It outlines 7 basic steps to troubleshoot connection issues, including ensuring the SIM card and modem are inserted properly, checking for network signal and connection status. It also provides guidance on troubleshooting disconnection, inability to browse, and slow browsing issues, recommending steps like testing the SIM card and modem on different devices, checking firewall and antivirus settings, and contacting customer support if problems persist.
Laptop configuration through dialup connection (telenor)gemini2050
The document provides step-by-step instructions for configuring a PC or laptop to connect to the internet via a GPRS connection through a GSM phone. It details setting the phone modem properties, adding an initialization command, creating a new dialup connection and selecting options to connect using the GSM phone with a Telenor number and access point name. Users are advised to check settings if unable to connect and provided tips to troubleshoot connection issues.
The document provides instructions for registering a Grandstream BT-200 phone with a PBXware server using either manual configuration, auto-provisioning, or auto-configuration. It outlines the requirements and steps to configure the UAD settings and create an extension on the PBXware server. The instructions also describe how to configure the Grandstream phone by accessing its web interface and setting the TFTP server. Once completed, the phone should successfully register with the PBXware system and be ready for use.
This document provides instructions for configuring a mobile device to use a JMeter HTTP proxy server for load testing mobile web applications. It describes starting the JMeter HTTP proxy server on a computer, getting the computer's IP address, and then configuring the mobile device's network settings to use that computer as a proxy. Finally, it notes that the mobile web application can then be accessed normally through the proxy to simulate user actions for load testing purposes.
1. There are three basic methods for connecting a mobile phone to a PC: using an infrared port, USB or serial cable, or Bluetooth.
2. The document provides instructions for configuring PC settings and establishing a GPRS connection in Windows 98, 2000, XP by installing mobile device drivers, creating a new dial-up connection, and entering login credentials.
3. To use the Opera web browser on a mobile device, download Opera onto a PC or directly onto the mobile device, align infrared ports during installation, and Opera will be available once detection and setup are complete.
1. The document provides solutions for resolving internet connection problems including confirming your internet subscription and performing a power cycle by turning off the modem for 30 seconds and restarting it.
2. It discusses key components of a Wi-Fi connection including wireless routers, antennas, and client devices. Being closer to the router or antenna results in faster connection speeds.
3. The document also covers mobile network technologies used in Tanzania such as CDMA, GSM, and avoidance of carrier locked international smartphones that may not be compatible with local networks.
This document provides installation instructions for a TP-LINK Wireless N Access Point model TL-WA701ND. It includes the following steps: 1) Connect the Access Point to a computer or wireless network using an Ethernet cable or wirelessly; 2) Log into the Access Point's web interface using the default username and password; 3) Select an operation mode such as Access Point, Repeater, or Client mode; 4) Configure wireless and network settings; 5) Reboot the Access Point to apply the new configuration. Troubleshooting tips are provided at the end to restore default settings or access the web interface.
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
The document provides instructions for manually installing and configuring various ADSL modems, including the 2Wire 2701-A, SpeedTouch 530/510, Siemens Speedstream 4200, and SpeedTouch 536 modems. It describes connecting the modems, installing drivers, entering login credentials in the modem interface, and testing the connection. Auto-setup instructions are provided for the 2Wire 2701-A modem which guide the user through installation with a setup CD. Troubleshooting tips are also included.
This document provides instructions for installing and configuring the AirGateMax outdoor wireless access point. It includes details on the hardware components, mounting the device outdoors, making connections to an indoor network via an Ethernet over powerline adapter, and accessing the device's web-based interface using its IP address to configure settings. Basic information on the device's status indicators and administrative login is also provided.
1) The document provides instructions for setting up a modem router by connecting it to a computer, wall jack, and other network devices.
2) It describes powering on the devices and checking that the LED lights display properly on the router. If not, the connections should be checked.
3) The setup can be done by running a setup CD or accessing the router's web interface. The document then outlines the steps to configure the router's internet, wireless, and other settings.
The document provides an installation guide for an outdoor 4G CPE device. It includes:
- An overview of the device's features such as its high gain antenna, rugged IP67 enclosure, operating temperature range, and PoE support.
- Steps for installing the device including mounting, grounding, connecting the antenna and Ethernet port, and accessing the device's web interface.
- Instructions for initial configuration like setting the APN, timezone and passwords.
- Troubleshooting tips for issues like the device not powering on or being unable to access connected devices.
GSM GPRS SIM900A Module with Stub Antenna and SMA ConnectorRaghav Shetty
GSM/GPRS Modem-RS232 is built with Dual Band GSM/GPRS engine- SIM900A, works on frequencies 900/ 1800 MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as microcontroller with RS232 Chip(MAX232). The baud rate is configurable from 9600-115200 through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. It is suitable for SMS, Voice as well as DATA transfer application in M2M interface. The onboard Regulated Power supply allows you to connect wide range unregulated power supply . Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and internet through simple AT commands
1) Smoking is linked to tobacco and was originally used by Native Americans, but spread worldwide during imperialism as many governments relied on tobacco tax revenue.
2) Tobacco smoking causes numerous health issues like lung cancer, heart disease, and other cancers due to chemicals like tar and nicotine. It increases blood pressure and negatively impacts fetal development.
3) Tobacco kills over 6 million people worldwide annually, draining $500 billion from the global economy. Banning tobacco advertisements and prohibiting smoking in public places in many countries has helped reduce smoking, but stronger implementation of laws is still needed.
Julien LeClec'h is a 30-year-old French engineer with 8 years of experience in research, engineering, and applications roles. He has a PhD in physics and materials science. He is currently an application engineer at Synova SA in Lausanne, Switzerland. His background includes modeling, characterization, and optimization of materials, processes, and products for applications such as laser diodes. He is interested in developing new skills through diverse projects and collaborating with multidisciplinary teams.
The Chrysler Technology Center is Chrysler's main research and development facility. Located in Auburn Hills, Michigan, it employs over 2,000 engineers and scientists who work on developing new automotive technologies like electric vehicles, autonomous driving systems, and advanced safety features. Their goal is to create innovative transportation solutions that improve people's lives.
This document provides instructions for installing a 4G wireless security solution using a ZTE 4G wireless router, SIM card, Skywatch cameras, and an iPad. The setup involves inserting the SIM card into the router, connecting the cameras and power cords, powering on the extension cord to activate the router, connecting the iPad to the router's wireless network, and using the Skywatch app to view live video streams and cloud recordings from the cameras. The solution allows for wireless security monitoring without a fixed internet connection.
Alessandro Magnani, Data Scientist, @WalmartLabs at MLconf SF - 11/13/15MLconf
- Classifying products in a fast-changing environment poses challenges for accurately evaluating classification models over time. Labeling products is expensive so labels must be used optimally.
- An evaluation framework is proposed that stores the sampling profile (probability pi of each item i being selected) for labeled items. Accuracy is calculated based on these sampling probabilities to account for non-uniform sampling.
- Given an existing sampling and extra budget, new items can be sampled optimally to minimize accuracy variance while satisfying budget constraints. This allows for better reuse of existing labels over time as products and models change.
The document provides a broadband troubleshooting guide for users experiencing issues connecting to or using their Celcom broadband connection. It outlines 7 basic steps to troubleshoot connection issues, including ensuring the SIM card and modem are inserted properly, checking for network signal and connection status. It also provides guidance on troubleshooting disconnection, inability to browse, and slow browsing issues, recommending steps like testing the SIM card and modem on different devices, checking firewall and antivirus settings, and contacting customer support if problems persist.
Laptop configuration through dialup connection (telenor)gemini2050
The document provides step-by-step instructions for configuring a PC or laptop to connect to the internet via a GPRS connection through a GSM phone. It details setting the phone modem properties, adding an initialization command, creating a new dialup connection and selecting options to connect using the GSM phone with a Telenor number and access point name. Users are advised to check settings if unable to connect and provided tips to troubleshoot connection issues.
The document provides instructions for registering a Grandstream BT-200 phone with a PBXware server using either manual configuration, auto-provisioning, or auto-configuration. It outlines the requirements and steps to configure the UAD settings and create an extension on the PBXware server. The instructions also describe how to configure the Grandstream phone by accessing its web interface and setting the TFTP server. Once completed, the phone should successfully register with the PBXware system and be ready for use.
This document provides instructions for configuring a mobile device to use a JMeter HTTP proxy server for load testing mobile web applications. It describes starting the JMeter HTTP proxy server on a computer, getting the computer's IP address, and then configuring the mobile device's network settings to use that computer as a proxy. Finally, it notes that the mobile web application can then be accessed normally through the proxy to simulate user actions for load testing purposes.
1. There are three basic methods for connecting a mobile phone to a PC: using an infrared port, USB or serial cable, or Bluetooth.
2. The document provides instructions for configuring PC settings and establishing a GPRS connection in Windows 98, 2000, XP by installing mobile device drivers, creating a new dial-up connection, and entering login credentials.
3. To use the Opera web browser on a mobile device, download Opera onto a PC or directly onto the mobile device, align infrared ports during installation, and Opera will be available once detection and setup are complete.
1. The document provides solutions for resolving internet connection problems including confirming your internet subscription and performing a power cycle by turning off the modem for 30 seconds and restarting it.
2. It discusses key components of a Wi-Fi connection including wireless routers, antennas, and client devices. Being closer to the router or antenna results in faster connection speeds.
3. The document also covers mobile network technologies used in Tanzania such as CDMA, GSM, and avoidance of carrier locked international smartphones that may not be compatible with local networks.
This document provides installation instructions for a TP-LINK Wireless N Access Point model TL-WA701ND. It includes the following steps: 1) Connect the Access Point to a computer or wireless network using an Ethernet cable or wirelessly; 2) Log into the Access Point's web interface using the default username and password; 3) Select an operation mode such as Access Point, Repeater, or Client mode; 4) Configure wireless and network settings; 5) Reboot the Access Point to apply the new configuration. Troubleshooting tips are provided at the end to restore default settings or access the web interface.
Congratulations……!!!!! A Good news for all of us. Now you can buy all electronic products like bluetooth relays, iPhone relays to automate your home, Fusion Series Controllers, Ethernet Controlled Relay, ethernet relay, ethernet relay control, remote controlled electrical switch, remote controlled dimmer, Push Notifications IOS, ios push notification server, wifi power switch, home automation ideas, wifi relay controller etc. only at https://www.controlanything.co.in/
The document provides instructions for manually installing and configuring various ADSL modems, including the 2Wire 2701-A, SpeedTouch 530/510, Siemens Speedstream 4200, and SpeedTouch 536 modems. It describes connecting the modems, installing drivers, entering login credentials in the modem interface, and testing the connection. Auto-setup instructions are provided for the 2Wire 2701-A modem which guide the user through installation with a setup CD. Troubleshooting tips are also included.
This document provides instructions for installing and configuring the AirGateMax outdoor wireless access point. It includes details on the hardware components, mounting the device outdoors, making connections to an indoor network via an Ethernet over powerline adapter, and accessing the device's web-based interface using its IP address to configure settings. Basic information on the device's status indicators and administrative login is also provided.
1) The document provides instructions for setting up a modem router by connecting it to a computer, wall jack, and other network devices.
2) It describes powering on the devices and checking that the LED lights display properly on the router. If not, the connections should be checked.
3) The setup can be done by running a setup CD or accessing the router's web interface. The document then outlines the steps to configure the router's internet, wireless, and other settings.
The document provides an installation guide for an outdoor 4G CPE device. It includes:
- An overview of the device's features such as its high gain antenna, rugged IP67 enclosure, operating temperature range, and PoE support.
- Steps for installing the device including mounting, grounding, connecting the antenna and Ethernet port, and accessing the device's web interface.
- Instructions for initial configuration like setting the APN, timezone and passwords.
- Troubleshooting tips for issues like the device not powering on or being unable to access connected devices.
GSM GPRS SIM900A Module with Stub Antenna and SMA ConnectorRaghav Shetty
GSM/GPRS Modem-RS232 is built with Dual Band GSM/GPRS engine- SIM900A, works on frequencies 900/ 1800 MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as microcontroller with RS232 Chip(MAX232). The baud rate is configurable from 9600-115200 through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. It is suitable for SMS, Voice as well as DATA transfer application in M2M interface. The onboard Regulated Power supply allows you to connect wide range unregulated power supply . Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and internet through simple AT commands
This document provides instructions for setting up and using a USB modem. It includes:
1. An overview of what is included in the package and the quick start set up steps.
2. The minimum system requirements needed to use the USB modem and software.
3. Detailed instructions on inserting the SIM card, installing the software, and connecting to the internet or mobile network.
Canatal modulo web m52 web-interface_datasheetXavier Cazares
The document provides instructions for configuring the network and web interface settings of ClimateWorx air conditioning control systems. It describes connecting the web interface to the network using a crossover cable and default IP address of 10.0.0.188. The instructions explain how to access the web interface and change the IP address if needed. Additional sections cover configuring system settings like temperature units and clock, assigning addresses to individual units, monitoring unit data and alarms, and setting up email alerts.
The document provides instructions for setting up and using a BT Business Mobile Broadband USB modem. It includes steps for inserting the SIM card, installing the necessary software, and connecting to the internet either via Wi-Fi or the mobile network. Information is also provided about the different connection methods available, indicator light meanings, and safety guidelines for using the device.
The document provides step-by-step instructions for setting up a Verizon FIOS Actiontec router to work with a g! system. It involves logging into the router, configuring the DHCP settings and port forwarding to direct network traffic on ports 2198-2199 to the g! system device at a static IP address of 192.168.1.2. The final steps test that the port forwarding was successfully configured by checking if the ports are detected as open using a port checking website.
GSM/GPRS Modem-RS232 is built with Dual Band GSM/GPRS engine- SIM900A, works on frequencies 900/ 1800 MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as microcontroller with RS232 Chip(MAX232). The baud rate is configurable from 9600-115200 through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. It is suitable for SMS, Voice as well as DATA transfer application in M2M interface. The onboard Regulated Power supply allows you to connect wide range unregulated power supply . Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and internet through simple AT commands
Getting Started with SainSmart SIM900 GPRS (Autosaved)Devrhoid Davis
The document provides instructions for connecting a SainSmart SIM900 GPRS/GSM module to a computer, Arduino, microcontroller, and Raspberry Pi. It describes the required hardware, software, and gives step-by-step directions for setup and configuration. Specific examples are given for sending text messages from the module connected to a computer using AT commands in TeraTerm terminal software. Sections about connecting the module to other platforms and the internet are listed but not yet filled in.
Similar to Connect to Internet using your "Phone" as Modem (20)
Automatic water level monitoring and control system using IoTDanish Mehraj
This is the documentation for making Automatic water level monitoring and control system using Internet of Thimgs (IoT) which will help is to save water and removes the efforts to take care of watering u[ the tanks in homes and offices.
The manual is compatible with all the Maruti Suziki models which are not pre-installed with Securiy Alarm (Central Locking/Key-less entry to the vehicles). Some popular models supported are Maruti Alto 800 (All variants), Maruti Alto K10 (All variants)/
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
India's first lunar mission, Chandrayaan-1, was launched in 2008 with the goals of mapping the lunar surface and studying the moon's chemical and mineral composition. The unmanned mission included an orbiter and an impactor that successfully entered lunar orbit. Chandrayaan-1 carried instruments that mapped the moon's topography and identified the presence of water ice at the lunar poles. However, the spacecraft nearly failed in 2009 when its star tracker overheated, requiring engineers to improvise a solution to keep it oriented. India plans to follow up with Chandrayaan-2 in 2012, which will include a robotic rover. While the mission promises scientific advances, some critics argue India should prioritize basic needs over its space
The document provides an overview of the Windows Phone 7 platform, including its software architecture, application model, user interface model, and hardware foundation. It describes the Metro UI design, hardware specifications supported in Windows Phone 7.0, and the two flavors of applications. It also summarizes the developer tools, deployment process, Silverlight capabilities for inputs, media, data access, and communication. Key UI elements like the application bar, panorama, and pivot are outlined. Integration services for launchers, choosers, push notifications, and location are also highlighted.
Review about earlier Windows O/S and new Windows 8Danish Mehraj
This document provides information about Danish Mehraj, a Microsoft Student Partner, including his contact details. It also summarizes the key early operating systems released by Microsoft, including MS-DOS, Windows 95, 98, ME/2000, XP, Vista and 7. For each operating system, it lists the developer, programming language used, current status, licensing and other technical details.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Climate Impact of Software Testing at Nordic Testing Days
Connect to Internet using your "Phone" as Modem
1. HOW CAN WE CONNECT A COMPUTER TO THE INTERNET USING MOBILE AS A MODEM (GPRS)
STEP 1:
a. Connect you Phone to the PC
b. Go to the Control Panel
Click here
2. STEP 2 : Click on “Phone and Modems”
Click here
8. Step 8: Write the following command in “Extra initializing Commands” text box:
AT+CGDCONT=1,”IP”,”access point”<cr>
In above command replace “access point” by ISP’s access point (you can consult ISP’s
Customer Care for GPRS Access point. For “Airtel” access point is airtelgprs.com
For example; if the ISP is AIRTEL, write the following command:
AT+CGDCONT=1,”IP”,”airtelgprs.com”<cr>
Write the above command here
10. Step 9: Now make a “Dial Up” connection and use the following setting:
Dial Up Phone number = *99#
Or
*99***#
Or
*99***1#
Or
*99**1*#
Username = BLANK
Password= BLANK
Connection name= Mobile or something you like
CLICK ON “CONNECT” option…………………