Concentration of A in water = mass of Avolume of water= 0.24100 .pdf
•
0 likes•2 views
Concentration of A in water = mass of A/volume of water = 0.24/100 = 0.0024 g/mL Concentration of A in ether = mass of A/volume of ether = 2.70/100 = 0.027 g/mL Partition coefficient = concentration of A in ether/concentration of A in water = 0.027/0.0024 = 11.25 Solution Concentration of A in water = mass of A/volume of water = 0.24/100 = 0.0024 g/mL Concentration of A in ether = mass of A/volume of ether = 2.70/100 = 0.027 g/mL Partition coefficient = concentration of A in ether/concentration of A in water = 0.027/0.0024 = 11.25.
Report
Share
Report
Share
Download to read offline
Recommended
106Solution106.pdf
This short document appears to contain only a solution number "106" repeated twice. It does not contain enough contextual information to generate a meaningful multi-sentence summary.
1)volume =pir^2 h=pi2^2 2=8pi cubic yardssurface area =2pi r.pdf
1)volume =pir^2 h
=pi*2^2 *2
=8pi cubic yards
surface area =2pi r h +2pir^2=2pi*2*2 +2*pi*2^2= 16pi square yards
2)area=(1/2)*base*height
=(1/2)*(y+2)*3
=(3/2)*(y+2)
Solution
1)volume =pir^2 h
=pi*2^2 *2
=8pi cubic yards
surface area =2pi r h +2pir^2=2pi*2*2 +2*pi*2^2= 16pi square yards
2)area=(1/2)*base*height
=(1/2)*(y+2)*3
=(3/2)*(y+2).
1) Partnerships are considered to be pass-through entities for t.pdf
1) Partnerships are considered to be \"pass-through\" entities for tax purposes.
As parterniship has no separate legal entity in the eye of law, unlike a corporation, its taxes are
not separate from its partners. ll of the profits and losses of the partnership \"pass through\" the
business to the partners, who pay taxes on their share of the profits (or deduct their share of the
losses) on their individual income tax returns. In simple words, parnetrs first get their shared
profit or loss from the operations of the business, then either pay taxes on the shares of profit
individually or get tax return in case of loss individually. And Each partner\'s share of profits and
losses is usually set out in a written partnership agreement, thus the tax also get clear from such
share.
2) Partnership business must file the two forms which are named as : Form 1065 and Schedule
K-1. Form 1065 is filled to provide an informational return the IRS reviews to determine whether
the partners are reporting their income correctly. Schedule K-1 is filled with IRS and to each
partner in order to breaks down each partner\'s share of the business\'s profits and losses.
Yes as stated above, each partner reciev schedule K-1 fro other partners in the partnership.
3) ONce the partners receive the income from the partnership business, they individually reports
this profit and loss information earned from the income on his or her individual tax return (Form
1040), with Schedule E attached. They are obliged to separate enough money to pay taxes on his
share of annual profits. Partners must estimate the amount of tax they will owe for the year and
make payments to the IRS at each quarter -- in April, July, October, and January.
Scedule E is used to report such income to the IRS.
Yes, partners must pay taxes on profits even if those profits are not distributed to the partners.
The IRS demands taxes from the profit thai is income minus expenses of the business regardless
of what the partners withdraw or not from their shares.
4) Distributive Share is the portion of profits to which a partner is entitled under a partnership
agreement -- or under state law, if the partners didn\'t make an agreement. It is usually shared to
the partners according to their ownership interests in the business. Lets say Partner has
contributed 50% of capital in the business; Partner B has contributed 30% and Partner C has
contributed 20%. Then their distributed share will be 50% : 30% : 20% , that is A will receive
60%, B will receive 30% and C will reciev 20% os share in profit or loss.
5) Sometimes an active partners works on behalf of other as well in the conduct of business
operation. For which he gets rumenaration, which is also a kind of income earned from self
employment. THus, here the partner is entitled to pay taxes not only on share of profit but alos
on the income earned this way. This is known as self-employment taxes.
There are some differences between the contributions regular employe.
Thermoplastic polymer is a polymer that turns to .pdf
Thermoplastic polymer is a polymer that turns to a liquid when heated and freezes
to a rigid state when cooled sufficiently. Most thermoplastics are high-molecular-weight
polymers whose chains associate through weak Van der Waals forces (polyethylene); stronger
dipole-dipole interactions and hydrogen bonding (nylon); or even stacking of aromatic rings
(polystyrene). Thermoplastic polymers differ from thermosetting polymers (e.g. phenolics,
epoxies) in that they can be remelted and remoulded. Many thermoplastic materials are addition
polymers; e.g., vinyl chain-growth polymers such as polyethylene and polypropylene; others are
productions of condensation or other forms of polyaddition polymerisation, such as the
polyamides or polyester.
Solution
Thermoplastic polymer is a polymer that turns to a liquid when heated and freezes
to a rigid state when cooled sufficiently. Most thermoplastics are high-molecular-weight
polymers whose chains associate through weak Van der Waals forces (polyethylene); stronger
dipole-dipole interactions and hydrogen bonding (nylon); or even stacking of aromatic rings
(polystyrene). Thermoplastic polymers differ from thermosetting polymers (e.g. phenolics,
epoxies) in that they can be remelted and remoulded. Many thermoplastic materials are addition
polymers; e.g., vinyl chain-growth polymers such as polyethylene and polypropylene; others are
productions of condensation or other forms of polyaddition polymerisation, such as the
polyamides or polyester..
H0Solution H0.pdf
This 3 sentence document does not provide enough contextual information to generate an accurate 3 sentence summary. The document contains only the letters "H0:" repeated twice but no other words, sentences or context. Therefore, a meaningful summary cannot be produced from the limited information given.
The Sarbanes-Oxley Act of 2002 created the PCAOB required that audit.pdf
The Sarbanes-Oxley Act of 2002 created the PCAOB required that auditors of U.S. public
companies be subject to external and independent oversight.
Part-I-Why is the PCAOB important to the auditors?
PCAOB has the following powers:
Under Section 101 of the Sarbanes-Oxley Act, the PCAOB has the power to:
Hence, it becomes extremely important for the auditors to adhere to the norms issued by
PCAOB.
Part-III-Reason for the reorganization of auditing standards
PCAOB auditing standards consisted of two types of equally authoritative auditing standards: (i)
standards originally issued by the Auditing Standards Board (\"ASB\") of the American Institute
of Certified Public Accountants (\"AICPA\") and adopted by the Board on an interim,
transitional basis in April 2003 and (ii) standards issued by the Board. In April 2003, the Board
adopted, on an interim, transitional basis, generally accepted auditing standards that were in
existence on April 16, 2003.
When the Board adopted those auditing standards, it continued to use the topical organization
and reference numbers (\"AU sections\") in the ASB\'s then-existing codification of its standards.
Auditing standards issued by the Board (\"AS standards\") have not been codified or otherwise
organized by topic, and are numbered in sequential order based upon when they were issued.
Thus far, the Board has issued 18 auditing standards (AS Nos. 1–18), which have superseded 12
interim auditing standards and amended the majority of the remaining interim auditing standards
to varying degrees. As a result, the Board\'s auditing standards are organized using two separate
numbering systems: (i) the numbering system used by the ASB when the Board adopted the
interim standards and (ii) the numbering system used by the Board for the standards it has issued.
The Board undertook a project to consider enhancing the usability of the PCAOB auditing
standards by reorganizing the standards using a single, integrated numbering system and a
topical structure that generally follows the flow of the audit process.
Part II- Examination of the standard after the reorganization
The PCAOB has amended to reorganize the standards substantially as proposed, with some
refinements as described below. Under the reorganization, the individual standards will be
grouped into the following topical categories:
Part IV- Impact of Reorganization on professional auditors
The reorganization of the PCAOB\'s auditing standards under consideration today is an
important step in promoting the investing public\'s interest in audit quality. This reorganization
provides auditors and others a logical framework and easy access to the standards governing the
conduct of audits. Auditors and other users will no longer have to jump back and forth between
what we called \"interim\" standards and PCAOB-issued standards. The reorganization does not
make additional work for auditors. Rather, it should make professional practice easier. We will
now have one set of audit.
The probability that expect to last less than 250 days isP(X250) .pdf
The probability that expect to last less than 250 days is
P(X<250) = P((X-mean)/s <(250-268)/15)
=P(Z<-1.2) =0.1151 (from standard normal table)
So 50*0.1151= 5.755
Take n=6
Solution
The probability that expect to last less than 250 days is
P(X<250) = P((X-mean)/s <(250-268)/15)
=P(Z<-1.2) =0.1151 (from standard normal table)
So 50*0.1151= 5.755
Take n=6.
The 6-bit variation of BCD for representing characters and numbers w.pdf
The 6-bit variation of BCD for representing characters and numbers was severely limited inhow
it could represent and manipulate data; in fact, lowercase letters were not part of itsrepertoire.
The designers of the System needed more information processing capability as well as a uniform
manner in which to store both numbers and data. In order to maintain compatibility with earlier
computers and peripheral equipment, the IBMengineers decided that it would be best to simply
expand BCD from 6 bits to 8 bits.Accordingly, this new code was calledExtended Binary Coded
Decimal InterchangeCode (EBCDIC). IBM continues to use EBCDIC in IBM mainframe and
midrange computer systems.
Solution
The 6-bit variation of BCD for representing characters and numbers was severely limited inhow
it could represent and manipulate data; in fact, lowercase letters were not part of itsrepertoire.
The designers of the System needed more information processing capability as well as a uniform
manner in which to store both numbers and data. In order to maintain compatibility with earlier
computers and peripheral equipment, the IBMengineers decided that it would be best to simply
expand BCD from 6 bits to 8 bits.Accordingly, this new code was calledExtended Binary Coded
Decimal InterchangeCode (EBCDIC). IBM continues to use EBCDIC in IBM mainframe and
midrange computer systems..
Recommended
106Solution106.pdf
This short document appears to contain only a solution number "106" repeated twice. It does not contain enough contextual information to generate a meaningful multi-sentence summary.
1)volume =pir^2 h=pi2^2 2=8pi cubic yardssurface area =2pi r.pdf
1)volume =pir^2 h
=pi*2^2 *2
=8pi cubic yards
surface area =2pi r h +2pir^2=2pi*2*2 +2*pi*2^2= 16pi square yards
2)area=(1/2)*base*height
=(1/2)*(y+2)*3
=(3/2)*(y+2)
Solution
1)volume =pir^2 h
=pi*2^2 *2
=8pi cubic yards
surface area =2pi r h +2pir^2=2pi*2*2 +2*pi*2^2= 16pi square yards
2)area=(1/2)*base*height
=(1/2)*(y+2)*3
=(3/2)*(y+2).
1) Partnerships are considered to be pass-through entities for t.pdf
1) Partnerships are considered to be \"pass-through\" entities for tax purposes.
As parterniship has no separate legal entity in the eye of law, unlike a corporation, its taxes are
not separate from its partners. ll of the profits and losses of the partnership \"pass through\" the
business to the partners, who pay taxes on their share of the profits (or deduct their share of the
losses) on their individual income tax returns. In simple words, parnetrs first get their shared
profit or loss from the operations of the business, then either pay taxes on the shares of profit
individually or get tax return in case of loss individually. And Each partner\'s share of profits and
losses is usually set out in a written partnership agreement, thus the tax also get clear from such
share.
2) Partnership business must file the two forms which are named as : Form 1065 and Schedule
K-1. Form 1065 is filled to provide an informational return the IRS reviews to determine whether
the partners are reporting their income correctly. Schedule K-1 is filled with IRS and to each
partner in order to breaks down each partner\'s share of the business\'s profits and losses.
Yes as stated above, each partner reciev schedule K-1 fro other partners in the partnership.
3) ONce the partners receive the income from the partnership business, they individually reports
this profit and loss information earned from the income on his or her individual tax return (Form
1040), with Schedule E attached. They are obliged to separate enough money to pay taxes on his
share of annual profits. Partners must estimate the amount of tax they will owe for the year and
make payments to the IRS at each quarter -- in April, July, October, and January.
Scedule E is used to report such income to the IRS.
Yes, partners must pay taxes on profits even if those profits are not distributed to the partners.
The IRS demands taxes from the profit thai is income minus expenses of the business regardless
of what the partners withdraw or not from their shares.
4) Distributive Share is the portion of profits to which a partner is entitled under a partnership
agreement -- or under state law, if the partners didn\'t make an agreement. It is usually shared to
the partners according to their ownership interests in the business. Lets say Partner has
contributed 50% of capital in the business; Partner B has contributed 30% and Partner C has
contributed 20%. Then their distributed share will be 50% : 30% : 20% , that is A will receive
60%, B will receive 30% and C will reciev 20% os share in profit or loss.
5) Sometimes an active partners works on behalf of other as well in the conduct of business
operation. For which he gets rumenaration, which is also a kind of income earned from self
employment. THus, here the partner is entitled to pay taxes not only on share of profit but alos
on the income earned this way. This is known as self-employment taxes.
There are some differences between the contributions regular employe.
Thermoplastic polymer is a polymer that turns to .pdf
Thermoplastic polymer is a polymer that turns to a liquid when heated and freezes
to a rigid state when cooled sufficiently. Most thermoplastics are high-molecular-weight
polymers whose chains associate through weak Van der Waals forces (polyethylene); stronger
dipole-dipole interactions and hydrogen bonding (nylon); or even stacking of aromatic rings
(polystyrene). Thermoplastic polymers differ from thermosetting polymers (e.g. phenolics,
epoxies) in that they can be remelted and remoulded. Many thermoplastic materials are addition
polymers; e.g., vinyl chain-growth polymers such as polyethylene and polypropylene; others are
productions of condensation or other forms of polyaddition polymerisation, such as the
polyamides or polyester.
Solution
Thermoplastic polymer is a polymer that turns to a liquid when heated and freezes
to a rigid state when cooled sufficiently. Most thermoplastics are high-molecular-weight
polymers whose chains associate through weak Van der Waals forces (polyethylene); stronger
dipole-dipole interactions and hydrogen bonding (nylon); or even stacking of aromatic rings
(polystyrene). Thermoplastic polymers differ from thermosetting polymers (e.g. phenolics,
epoxies) in that they can be remelted and remoulded. Many thermoplastic materials are addition
polymers; e.g., vinyl chain-growth polymers such as polyethylene and polypropylene; others are
productions of condensation or other forms of polyaddition polymerisation, such as the
polyamides or polyester..
H0Solution H0.pdf
This 3 sentence document does not provide enough contextual information to generate an accurate 3 sentence summary. The document contains only the letters "H0:" repeated twice but no other words, sentences or context. Therefore, a meaningful summary cannot be produced from the limited information given.
The Sarbanes-Oxley Act of 2002 created the PCAOB required that audit.pdf
The Sarbanes-Oxley Act of 2002 created the PCAOB required that auditors of U.S. public
companies be subject to external and independent oversight.
Part-I-Why is the PCAOB important to the auditors?
PCAOB has the following powers:
Under Section 101 of the Sarbanes-Oxley Act, the PCAOB has the power to:
Hence, it becomes extremely important for the auditors to adhere to the norms issued by
PCAOB.
Part-III-Reason for the reorganization of auditing standards
PCAOB auditing standards consisted of two types of equally authoritative auditing standards: (i)
standards originally issued by the Auditing Standards Board (\"ASB\") of the American Institute
of Certified Public Accountants (\"AICPA\") and adopted by the Board on an interim,
transitional basis in April 2003 and (ii) standards issued by the Board. In April 2003, the Board
adopted, on an interim, transitional basis, generally accepted auditing standards that were in
existence on April 16, 2003.
When the Board adopted those auditing standards, it continued to use the topical organization
and reference numbers (\"AU sections\") in the ASB\'s then-existing codification of its standards.
Auditing standards issued by the Board (\"AS standards\") have not been codified or otherwise
organized by topic, and are numbered in sequential order based upon when they were issued.
Thus far, the Board has issued 18 auditing standards (AS Nos. 1–18), which have superseded 12
interim auditing standards and amended the majority of the remaining interim auditing standards
to varying degrees. As a result, the Board\'s auditing standards are organized using two separate
numbering systems: (i) the numbering system used by the ASB when the Board adopted the
interim standards and (ii) the numbering system used by the Board for the standards it has issued.
The Board undertook a project to consider enhancing the usability of the PCAOB auditing
standards by reorganizing the standards using a single, integrated numbering system and a
topical structure that generally follows the flow of the audit process.
Part II- Examination of the standard after the reorganization
The PCAOB has amended to reorganize the standards substantially as proposed, with some
refinements as described below. Under the reorganization, the individual standards will be
grouped into the following topical categories:
Part IV- Impact of Reorganization on professional auditors
The reorganization of the PCAOB\'s auditing standards under consideration today is an
important step in promoting the investing public\'s interest in audit quality. This reorganization
provides auditors and others a logical framework and easy access to the standards governing the
conduct of audits. Auditors and other users will no longer have to jump back and forth between
what we called \"interim\" standards and PCAOB-issued standards. The reorganization does not
make additional work for auditors. Rather, it should make professional practice easier. We will
now have one set of audit.
The probability that expect to last less than 250 days isP(X250) .pdf
The probability that expect to last less than 250 days is
P(X<250) = P((X-mean)/s <(250-268)/15)
=P(Z<-1.2) =0.1151 (from standard normal table)
So 50*0.1151= 5.755
Take n=6
Solution
The probability that expect to last less than 250 days is
P(X<250) = P((X-mean)/s <(250-268)/15)
=P(Z<-1.2) =0.1151 (from standard normal table)
So 50*0.1151= 5.755
Take n=6.
The 6-bit variation of BCD for representing characters and numbers w.pdf
The 6-bit variation of BCD for representing characters and numbers was severely limited inhow
it could represent and manipulate data; in fact, lowercase letters were not part of itsrepertoire.
The designers of the System needed more information processing capability as well as a uniform
manner in which to store both numbers and data. In order to maintain compatibility with earlier
computers and peripheral equipment, the IBMengineers decided that it would be best to simply
expand BCD from 6 bits to 8 bits.Accordingly, this new code was calledExtended Binary Coded
Decimal InterchangeCode (EBCDIC). IBM continues to use EBCDIC in IBM mainframe and
midrange computer systems.
Solution
The 6-bit variation of BCD for representing characters and numbers was severely limited inhow
it could represent and manipulate data; in fact, lowercase letters were not part of itsrepertoire.
The designers of the System needed more information processing capability as well as a uniform
manner in which to store both numbers and data. In order to maintain compatibility with earlier
computers and peripheral equipment, the IBMengineers decided that it would be best to simply
expand BCD from 6 bits to 8 bits.Accordingly, this new code was calledExtended Binary Coded
Decimal InterchangeCode (EBCDIC). IBM continues to use EBCDIC in IBM mainframe and
midrange computer systems..
STAT92E is present in Drosophila flies and the JAKSTAT pathway help.pdf
STAT92E is present in Drosophila flies and the JAK/STAT pathway helps in determining the P-
D(proximo distal) axis in leg and antennal imaginal discs of these flies. STAT92E is the
transcription factor which when phosphorylated migrates to the nucleus. It then binds specific
regulatory sequences to activate or repress the transcription of target genes. STAT92E represses
wg gene more robustly than dpp gene required for determining the P-D axis which is essential
for the formation of arthropod appendages i.e. legs and antennae. Thus if STAT92E is not
phosphorylated it will not migrate into the nucleus and will not act as a transcription factor to
regulate the genes responsible for the development of these appendages. Thus the fly with the
mutant STAT92E will not be able to develop proper leg with five segments and antennae with
six segments.
Solution
STAT92E is present in Drosophila flies and the JAK/STAT pathway helps in determining the P-
D(proximo distal) axis in leg and antennal imaginal discs of these flies. STAT92E is the
transcription factor which when phosphorylated migrates to the nucleus. It then binds specific
regulatory sequences to activate or repress the transcription of target genes. STAT92E represses
wg gene more robustly than dpp gene required for determining the P-D axis which is essential
for the formation of arthropod appendages i.e. legs and antennae. Thus if STAT92E is not
phosphorylated it will not migrate into the nucleus and will not act as a transcription factor to
regulate the genes responsible for the development of these appendages. Thus the fly with the
mutant STAT92E will not be able to develop proper leg with five segments and antennae with
six segments..
solid CO2 sublimes-dispersionCHCl3 boils-dispersion and dipole.pdf
solid CO2 sublimes
-dispersion
CHCl3 boils
-dispersion and dipole-dipole
Ice melts
-dispersion, dipole-dipole, and hydrogen bonding
Solution
solid CO2 sublimes
-dispersion
CHCl3 boils
-dispersion and dipole-dipole
Ice melts
-dispersion, dipole-dipole, and hydrogen bonding.
Smartphones have become the single most important digital device we .pdf
Smartphones have become the single most important digital device we own and require being
connected to a network to send and receive data.
Smartphones enable digital capabilities like view short video clips, play music and games, surf
the Web and transmit and receive corporate data, e-mail, messaging, wireless access to the
Internet, voice communication, and digital cameras.So we can perform many of the tasks of
today’s PCs on smartphones.
Examples of some brand name for smartphones : Apple, Blackberry, HTC, Huawei, iBall, Lava,
LeEco, LG, Micromax, Motorola, Microsoft, Nokia, Samsung, Sony, Spice, Xiomi
Wi-Fi allow users to access internet from different locations. We can use printers and servers
through Wi-Fi. We don\'t need printer for each computer and wired connection between them.
Bluetooth-enabled wireless technology provides an easy way to connect devices. We can access
videos, audio files, Web sites, and even video-conferencing through hotspots located in public
and private areas.
Wi-Fi speed can be increased by using a/b/g/n router. The range of Wireless-LAN (WLAN) or
Wi-Fi is around 20-25 feet indoors. So unauthorized access can be protected by using security.
High-speed cellular systems provide a way for users to access the Internet from virtually
anywhere at any time. More powerful cellular networks based on 2G, 3G, and now 4G. These
technology are expanding the amount and types of data users can access. User can access
services for voice, data, and high-quality streaming video.
So these are the advantages of smartphones over desktop and laptop.
Disadvantages can be security issues, durability, expensive and storage capacity.
Solution
Smartphones have become the single most important digital device we own and require being
connected to a network to send and receive data.
Smartphones enable digital capabilities like view short video clips, play music and games, surf
the Web and transmit and receive corporate data, e-mail, messaging, wireless access to the
Internet, voice communication, and digital cameras.So we can perform many of the tasks of
today’s PCs on smartphones.
Examples of some brand name for smartphones : Apple, Blackberry, HTC, Huawei, iBall, Lava,
LeEco, LG, Micromax, Motorola, Microsoft, Nokia, Samsung, Sony, Spice, Xiomi
Wi-Fi allow users to access internet from different locations. We can use printers and servers
through Wi-Fi. We don\'t need printer for each computer and wired connection between them.
Bluetooth-enabled wireless technology provides an easy way to connect devices. We can access
videos, audio files, Web sites, and even video-conferencing through hotspots located in public
and private areas.
Wi-Fi speed can be increased by using a/b/g/n router. The range of Wireless-LAN (WLAN) or
Wi-Fi is around 20-25 feet indoors. So unauthorized access can be protected by using security.
High-speed cellular systems provide a way for users to access the Internet from virtually
anywhere at any time. More powerful cell.
Since 2010, the authors have been on the faculty of a HBCU located i.pdf
Since 2010, the authors have been on the faculty of a HBCU located in Georgia. The authors are
the only full-time faculty, thus are responsible for teaching all accounting courses. The failure
rate has average thirty-five (35%) percent. Failure is defined as a student receiving a grade of
“D”, “F” or “W” in an accounting course. This failure rate was unacceptable, thus a search begin
to explore ways of reducing this rate without compromising the academic integrity required to
prepare students to become an accountant. This study explores a new teaching model designed to
improve students’ technical competencies while increasing their critical thinking skills. What
adjustments to a classroom lesson plan and teaching strategy are useful to improve interpersonal
communication, creativity, reasoning and analytical abilities? Does improvements in
interpersonal communication, creativity, reasoning and analytical abilities require abandoning
the traditional teaching model? Critical thinking includes analyzing, conceptualizing, reasoning
and evaluating. Research finds that these skills can be developed in learners if teaching strategies
evolve beyond memorization (Reinstein,2008). Accounting graduates are expected to possess a
healthy dose of critical thinking skills. This study explores a teaching model reflective of
cognitive thinking. Cognitive teaching increases the need to compare, contrast, group, and
memorize relevant accounting concepts. The literature argues that students have considerable
difficulty in solving accounting problems that are slightly different than those presented in the
classroom, even though the same concepts are being covered. The Pathways Commission has
called for improvements in accounting curriculum and teaching techniques (Bloom, 2013). The
quality of future accountants will be shaped by a need for improvement in critical thinking skills.
The purpose of this paper is to convey the authors’ result of using the ABCs of accounting
teaching model. SIGNIFICANCE OF THE PROBLEM The accounting profession requires more
creativity and innovative thinking in order to be competitive. Much of the literature argues that
teaching models that require students to memorize accounting rules and procedures fail to
cultivate critical thinking in problem solving. The Bedford Committee (1986) asserts that the
traditional accounting lectures fail to stimulate creativity and innovative thinking. Thus student
are not educational ready to enter the profession. The Pathway’s Commission finds that
accounting programs are overly invested in outmoded models. Bloom (2013) finds that students
increasingly exhibit difficulty solving complex accounting problems. The goal of teaching
should always embrace a pedagogy designed to discover a higher order of thinking. Higher order
critical thinking can be achieved if the teaching approach gets it right. Such is the pursuit of this
study. The five step process for developing higher level critical thinking skills.
Programimport java.util.Scanner; public class AreaOfRectangle {.pdf
Program:
import java.util.Scanner;
public class AreaOfRectangle {
public int length,breath;
public int getLength(){
return length;
}
public void setLength(int l){
length = l;
}
public int getBreath(){
return breath;
}
public void setBreath(int b){
breath = b;
}
AreaOfRectangle(){
length = 0;
breath = 0;
}
public static void main(String args[]){
AreaOfRectangle obj= new AreaOfRectangle();
Scanner sca = new Scanner(System.in);
String choice = new String();
do{
System.out.print(\"Enter Length : \");
obj.setLength(sca.nextInt());
System.out.print(\"Enter breath : \");
obj.setBreath(sca.nextInt());
System.out.println(\"Area : \"+ obj.getBreath() * obj.getLength());
System.out.println(\"Enter Choice : \");
choice = sca.next();
}while(!choice.equals(\"0\") && !choice.equals(\"Exit\") && !choice.equals(\"No\"));
}
}
Result:
Enter Length : 23
Enter breath : 34
Area : 782
Enter Choice :
23
Enter Length : 65
Enter breath : 67
Area : 4355
Enter Choice :
df
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
67
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
No
Solution
Program:
import java.util.Scanner;
public class AreaOfRectangle {
public int length,breath;
public int getLength(){
return length;
}
public void setLength(int l){
length = l;
}
public int getBreath(){
return breath;
}
public void setBreath(int b){
breath = b;
}
AreaOfRectangle(){
length = 0;
breath = 0;
}
public static void main(String args[]){
AreaOfRectangle obj= new AreaOfRectangle();
Scanner sca = new Scanner(System.in);
String choice = new String();
do{
System.out.print(\"Enter Length : \");
obj.setLength(sca.nextInt());
System.out.print(\"Enter breath : \");
obj.setBreath(sca.nextInt());
System.out.println(\"Area : \"+ obj.getBreath() * obj.getLength());
System.out.println(\"Enter Choice : \");
choice = sca.next();
}while(!choice.equals(\"0\") && !choice.equals(\"Exit\") && !choice.equals(\"No\"));
}
}
Result:
Enter Length : 23
Enter breath : 34
Area : 782
Enter Choice :
23
Enter Length : 65
Enter breath : 67
Area : 4355
Enter Choice :
df
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
67
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
No.
Ques-1. how and why would an asthma attack attack have an impact on .pdf
Ques-1. how and why would an asthma attack attack have an impact on the FEV and MVV?
Answer:
Asthma is the reversible blockade of respiratory pathways, which causes difficulty in breathing
out. This causes tightness in the chest region, dyspnea, and expiratory wheezing. Asthma
pathophysiology includes the constriction of bronchiolar smooth muscles result in low alveolar
PO2 due to lower oxygen availability for respiration. PO2 is decreased and Pco2 is increased.
Lesser ratio of V/Q leading to reduced partial pressure of O2 (due impairment of the pulmonary
air exchange) and reduced excretion of CO2 leading to more PCO2 usually happens in apnea or
asthma.
Maximal voluntary ventilation (MVV): it is the total volume of air expired within a specific time
when repetitive maximal voluntary effort. In asthma MVV, is reduced due to allergic histamine
secretion in the air sacs (alveoli) & due to bronchoconstriction. This is due to inadequate space
availability to fill the air sacs during respiration process
The variables such as FEV1 (expiratory volume) will be decreased in “asthma- lung disease due
to narrowing of bronchioles” however, FVC (F vital capacity) is approximately normal therefore,
finally FEV1/FVC ration will be decreased with time.
Peak Expiratory Flow Rate (PEFR): also referred as FEV (forced expiratory volume). In the
above case, spirometry performed to assess the function of lungs and it depends on age and sex,
height. Given, 60% predicted PEFR means severe and obstruction of airways lungs due to
asthma.
Ques-2. What causes apnea that sometimes occurs after hyperventilation?
Answer:
Apnea usually reduced rate of breathing thereby volume of breathing is less. Hyperventilation
induces higher incidence of pulmonary edema or fluid accumulation in the lungs as a result
\"apnea\" is going to develop. PO2 is decreased and Pco2 is increased. Lesser ratio of V/Q
leading to reduced partial pressure of O2 (due to impairment of the pulmonary air exchange) and
reduced excretion of CO2 leading to more PCO2 usually happens in apnea
Solution
Ques-1. how and why would an asthma attack attack have an impact on the FEV and MVV?
Answer:
Asthma is the reversible blockade of respiratory pathways, which causes difficulty in breathing
out. This causes tightness in the chest region, dyspnea, and expiratory wheezing. Asthma
pathophysiology includes the constriction of bronchiolar smooth muscles result in low alveolar
PO2 due to lower oxygen availability for respiration. PO2 is decreased and Pco2 is increased.
Lesser ratio of V/Q leading to reduced partial pressure of O2 (due impairment of the pulmonary
air exchange) and reduced excretion of CO2 leading to more PCO2 usually happens in apnea or
asthma.
Maximal voluntary ventilation (MVV): it is the total volume of air expired within a specific time
when repetitive maximal voluntary effort. In asthma MVV, is reduced due to allergic histamine
secretion in the air sacs (alveoli) & due to bronchoconstriction. This is.
OSIOSI may be a abstract model that characterizes and standardize.pdf
OSI:
OSI may be a abstract model that characterizes and standardizes the communication functions of
a computing or telecommunication equipment regardless of their underlying structure and
technology being employed. The goal of OSI model is that the ability of various communication
systems with customary protocols. It partitions a communication system in abstraction layers. the
initial version of OSI model outlined seven layers. A layer serves the layer on top of it and is
served by the layer below it. for instance, a layer that has the error-free communication across
the network provides the trail required by the appliance on top of it, whereas it calls following
layer to send and receive packets that comprise the contents of that path. 2 instances at constant
layer area unit envisioned as connected by a horizontal association in this layer.
TCP/IP:
TCP/IP may be a core protocol of the web Protocol Suite (IPS). it\'s the essential communication
language or protocol of the web. It is used as a protocol during a exceedingly|in a very} personal
network either associate degree computer network or an extranet. TCP/IP may be a 2 layer
program. The higher or higher layer transmission control protocol, manages the grouping of a
message or file into smaller packets that area unit transmitted over the web and received by a
transmission control protocol layer that reassembles the packets into the initial message. The
lower layer science, handles the address a part of every packet to urge the correct destination.
every entranceway pc on the network checks this address to visualize wherever to forward the
message. even if some packets from constant message area unit routed otherwise than others,
they\'re going to be reassembled at the destination.
Solution
OSI:
OSI may be a abstract model that characterizes and standardizes the communication functions of
a computing or telecommunication equipment regardless of their underlying structure and
technology being employed. The goal of OSI model is that the ability of various communication
systems with customary protocols. It partitions a communication system in abstraction layers. the
initial version of OSI model outlined seven layers. A layer serves the layer on top of it and is
served by the layer below it. for instance, a layer that has the error-free communication across
the network provides the trail required by the appliance on top of it, whereas it calls following
layer to send and receive packets that comprise the contents of that path. 2 instances at constant
layer area unit envisioned as connected by a horizontal association in this layer.
TCP/IP:
TCP/IP may be a core protocol of the web Protocol Suite (IPS). it\'s the essential communication
language or protocol of the web. It is used as a protocol during a exceedingly|in a very} personal
network either associate degree computer network or an extranet. TCP/IP may be a 2 layer
program. The higher or higher layer transmission control protocol, manages .
Name of diagnosis obsessive compulsive personality disorder.Symp.pdf
Name of diagnosis : obsessive compulsive personality disorder.
Symptoms: general pattern of concern with orderliness, perfectionism, excessive attention to
details, mental and interpersonal control, and a need for control over one\'s environment. Upset if
plans dont go according to plan,easily frustrated, cannot relax during vacations.
Solution
Name of diagnosis : obsessive compulsive personality disorder.
Symptoms: general pattern of concern with orderliness, perfectionism, excessive attention to
details, mental and interpersonal control, and a need for control over one\'s environment. Upset if
plans dont go according to plan,easily frustrated, cannot relax during vacations..
Monthly interest rate = 8.40 12 = 0.7Effective anuual rate = (.pdf
Monthly interest rate = 8.40% / 12 = 0.7%
Effective anuual rate = (1 + 0.007)12 -1
Effective anuual rate = 0.0873 or 8.73%
Solution
Monthly interest rate = 8.40% / 12 = 0.7%
Effective anuual rate = (1 + 0.007)12 -1
Effective anuual rate = 0.0873 or 8.73%.
first phage electron micrographs were published in 1940 in Germany a.pdf
first phage electron micrographs were published in 1940 in Germany and proved the particulate
nature of bacteriophages. Phages and infected bacteria were first examined raw and unstained.
US American scientists introduced shadowing and freeze-drying. Phages appeared to be tailed
and morphologically heterogeneous. Phage types identified by early electron microscopy include
enterobacteriophages T4, T1, T7, T5, 7–11, ViI and Pseudomonas phage PB1.
electron micrographs portray steps seen in the development of phage particles within infected
colon bacilli growing in liquid media. These show rupturing cells, the early appearance of
bacteriophage as particles with nearly empty heads, the globular and fibrous fine structure of the
extruded bacterial protoplasm and instances of practically complete conversion of cellular
contents into bacteriophage.
capsid is the protein shell of a virus. It consists of several oligomeric structural subunits made of
protein called protomers. The observable 3-dimensional morphological subunits, which may or
may not correspond to individual proteins, are called capsomeres. The capsid encloses the
genetic material of the virus.
Large capsid can hold large gnetic material.
the lenght of tail can tell us about the extent of penetration.
Solution
first phage electron micrographs were published in 1940 in Germany and proved the particulate
nature of bacteriophages. Phages and infected bacteria were first examined raw and unstained.
US American scientists introduced shadowing and freeze-drying. Phages appeared to be tailed
and morphologically heterogeneous. Phage types identified by early electron microscopy include
enterobacteriophages T4, T1, T7, T5, 7–11, ViI and Pseudomonas phage PB1.
electron micrographs portray steps seen in the development of phage particles within infected
colon bacilli growing in liquid media. These show rupturing cells, the early appearance of
bacteriophage as particles with nearly empty heads, the globular and fibrous fine structure of the
extruded bacterial protoplasm and instances of practically complete conversion of cellular
contents into bacteriophage.
capsid is the protein shell of a virus. It consists of several oligomeric structural subunits made of
protein called protomers. The observable 3-dimensional morphological subunits, which may or
may not correspond to individual proteins, are called capsomeres. The capsid encloses the
genetic material of the virus.
Large capsid can hold large gnetic material.
the lenght of tail can tell us about the extent of penetration..
Ethical considerations of project managementSolutionEthical c.pdf
Ethical considerations of project management:
Solution
Ethical considerations of project management:.
EBOLA • Reservoir A deadly disease that is caused by infection du.pdf
EBOLA
• Reservoir: A deadly disease that is caused by infection due to Ebola virus. Its reservoir
remains unknown. However, on the basis of evidence and similar viruses, it is believed that the
virus us animal-borne and bats are the likely reservoir.
•Transmission: This virus spreads by direct contact through blood of an infected human or
animals. It may also occur through an object contaminated with body fluids. Semen or breast-
milk of a person after recovering from the disease is a potential possibility.
•Number of cases: 28652 reported from march 2014 to march 2016.
•Mortality rate: 11 deaths per 1000 people in a year.
INFLUENZA
•Reservoir: Humans are the main reservoirs of infection for influenza virus A. Wild birds like
ducks, geese and shorebirds carry avian influenza virus. It has also been reported from pigs and
horses.
• Transmission: It is spread by:
1. Direct contact with the infected patients.
2. Direct contact with objects contaminated with virus.
3. Inhaling aerosols laiden with viruses.
• Number of cases: According to WHO, about 3 to 5 million people are affected every year.
• Deaths: According to WHO, approximately 250000-500000 deaths occur annually.
AIDS
This is a deadly disease caused by Human Immunodeficiency Virus (HIV).
• Reservoir: Infected cells in central nervous system and male urinogenital tract are mostly
responsible. But the most potential resource is memory T-cells infected with HIV-1 DNA.
• Transmission:
It is transmitted through:
1. Body fluids; blood, semen, pre-seminal fluids, rectal fluids, vaginal fluids, breast milk.
2. Sexual intercourse with an infected partner.
3. Sharing contaminated syringes and needles.
4. From mother to her unborn child during pregnancy and childbirth.
5. Through organ transplantation.
• Number of cases: According to AVERT, there are about 36.7 million people affected and
living with HIV.
• Deaths: According to AVERT, approximately 1.1 million people died due to HIV.
Solution
EBOLA
• Reservoir: A deadly disease that is caused by infection due to Ebola virus. Its reservoir
remains unknown. However, on the basis of evidence and similar viruses, it is believed that the
virus us animal-borne and bats are the likely reservoir.
•Transmission: This virus spreads by direct contact through blood of an infected human or
animals. It may also occur through an object contaminated with body fluids. Semen or breast-
milk of a person after recovering from the disease is a potential possibility.
•Number of cases: 28652 reported from march 2014 to march 2016.
•Mortality rate: 11 deaths per 1000 people in a year.
INFLUENZA
•Reservoir: Humans are the main reservoirs of infection for influenza virus A. Wild birds like
ducks, geese and shorebirds carry avian influenza virus. It has also been reported from pigs and
horses.
• Transmission: It is spread by:
1. Direct contact with the infected patients.
2. Direct contact with objects contaminated with virus.
3. Inhaling aerosols laiden with viruses.
• Numbe.
deploy NIDSnetwork intrusion detection systems (NIDS) are procedur.pdf
deploy NIDS
network intrusion detection systems (NIDS) are procedures that provides the security and
manages the computers as well as the minimzes network traffic.
Solution
deploy NIDS
network intrusion detection systems (NIDS) are procedures that provides the security and
manages the computers as well as the minimzes network traffic..
D. The Delphi Technique is an example of a qualitative assessment te.pdf
D. The Delphi Technique is an example of a qualitative assessment technique. It is not used for
quantitative assessment, DRP, or BCP
Solution
D. The Delphi Technique is an example of a qualitative assessment technique. It is not used for
quantitative assessment, DRP, or BCP.
Average return=Total returntotal time period10.1=(11-18+24+14+X).pdf
Average return=Total return/total time period
10.1=(11-18+24+14+X)/5(where X=return for missing year)
(10.1*5)=31+X
50.5=31+X
Hence return for missing year =50.5+31
=19.5%
Solution
Average return=Total return/total time period
10.1=(11-18+24+14+X)/5(where X=return for missing year)
(10.1*5)=31+X
50.5=31+X
Hence return for missing year =50.5+31
=19.5%.
AnswerDifference In the category of nutrients, there are m.pdf
Answer:
Difference:
In the category of nutrients, there are monomers and polymers. Monomers are the \"building
blocks\" of large macromolecules, or any molecule chain created through condensation reactions.
These are the polymers, three or more monomers bonded together.
In the category of carbohydrates, there are monosaccharides, disaccharides, oligosacchaides, and
polysaccharides. Just from the prefixes, you can tell that the monosaccharides are monomers, the
disaccharides are two bonded monomers (monosaccharides) and oligosacchaides and
polysaccharides are made up of many monomers (monosaccharides).
The monosaccharides are just a single carbon ring (in the natural aqueous environment of an
organism). The monosaccharides include glucose, fructose, and galactose. The disaccharides are
two carbon rings bonded together by a glycosidic linkage in a condensation (dehydration)
reaction, which removes a molecule of water. Disaccharides include maltose (glucose + glucose),
lactose (glucose + galactose), sucrose (glucose + fructose), and more.
When we consume food, we are taking in the large polysacchaides such as starch and smaller
molecules such as maltose. We take these long molecules and digest them - break up their
glycosidic linkages until they are monosaccharides (monomers) that we can absorb throughout
out alimentary canal (usually in small intestine)
Contrast:
Monosaccharides and disaccharides are the two kinds of simple sugars, a form of carbohydrate.
In contrast to polysaccharides, which contain three or more sugars and are also known as
complex carbohydrates, monosaccharides and disaccharides contain one and two sugars,
respectively. Monosaccharides include glucose, fructose, and galactose. Disaccharides, by
contrast, include sucrose, lactose, and maltose, and these are made up of two monosaccharides
bonded together, such as glucose and fructose or even glucose with glucose. Monosaccharides
require the least effort by the body to break down and therefore are digested and subsequently
available for energy more quickly than disaccharides.
Solution
Answer:
Difference:
In the category of nutrients, there are monomers and polymers. Monomers are the \"building
blocks\" of large macromolecules, or any molecule chain created through condensation reactions.
These are the polymers, three or more monomers bonded together.
In the category of carbohydrates, there are monosaccharides, disaccharides, oligosacchaides, and
polysaccharides. Just from the prefixes, you can tell that the monosaccharides are monomers, the
disaccharides are two bonded monomers (monosaccharides) and oligosacchaides and
polysaccharides are made up of many monomers (monosaccharides).
The monosaccharides are just a single carbon ring (in the natural aqueous environment of an
organism). The monosaccharides include glucose, fructose, and galactose. The disaccharides are
two carbon rings bonded together by a glycosidic linkage in a condensation (dehydration)
reaction, which removes a.
Answer option CBacteria are considered as the most ancient living.pdf
Answer: option C
Bacteria are considered as the most ancient living organisms on earth. Bacteria were found about
250 million year old in sea salt beneath CARLSBAD, New Mexico
Solution
Answer: option C
Bacteria are considered as the most ancient living organisms on earth. Bacteria were found about
250 million year old in sea salt beneath CARLSBAD, New Mexico.
Android developers use the term layout to mean one of two things. Bo.pdf
Android developers use the term layout to mean one of two things. Both definitions apply to this
tutorial, and are, unfortunately used interchangeably in the Android development community.
The two definitions of layout are:
Android user interfaces can be defined as layout resources in XML or created programmatically.
A layout defines the visual structure for a user interface, such as the UI for an activity or app
widget. You can declare a layout in two ways:
The Android framework gives you the flexibility to use either or both of these methods for
declaring and managing your application\'s UI. For example, you could declare your
application\'s default layouts in XML, including the screen elements that will appear in them and
their properties. You could then add code in your application that would modify the state of the
screen objects, including those declared in XML, at run time.
The advantage to declaring your UI in XML is that it enables you to better separate the
presentation of your application from the code that controls its behavior. Your UI descriptions
are external to your application code, which means that you can modify or adapt it without
having to modify your source code and recompile. For example, you can create XML layouts for
different screen orientations, different device screen sizes, and different languages. Additionally,
declaring the layout in XML makes it easier to visualize the structure of your UI, so it\'s easier to
debug problems. As such, this document focuses on teaching you how to declare your layout in
XML. If you\'re interested in instantiating View objects at runtime, refer to theViewGroup and
View class references.
Defining an XML Layout Resource
The most convenient and maintainable way to design application user interfaces is by creating
XML layout resources. This method greatly simplifies the UI design process, moving much of
the static creation and layout of user interface controls and definition of control attributes, to the
XML, instead of littering the code. It creates a potential distinction between UI designers (who
concern themselves more with layout) and developers (who know Java and implement
application functionality). Developers can still alter the content of a screen programmatically
when necessary. Complex controls, like ListView or GridView, are usually populated with data
programmatically.
XML layout resources must be stored in the /res/layout project directory (or, in the case of
alternative resources, in a specially named sub-directory). It’s common practice to create an
XML layout resource for each screen in your application (closely tied to a specific Activity), but
this is not required. You could, in theory, create an XML layout resource and use it for different
activities, supplying different data on the screen. You can also componentized your layout
resources and include them within one another, if needed.
The following is a simple XML layout resource, a template with a LinearLayout con.
A. The above symptom and the resultant disease is due to the mutatio.pdf
The document discusses how Fragile X Syndrome is caused by trinucleotide repeat expansion mutations that increase in later generations, causing more severe symptoms. This phenomenon of genetic diseases worsening in subsequent generations is called genetic anticipation, and is explained by higher copy numbers of repeats being linked to more serious symptoms.
a.) Use of light water as moderator eliminates requirement of a cool.pdf
a.) Use of light water as moderator eliminates requirement of a coolant.
The use of water as a moderator is an important safety feature of PWRs, as any increase in
temperature causes the water to expand and become less dense; thereby reducing the extent to
which neutrons are slowed down and hence reducing the reactivity in the reactor.
The light water absorbs too many neutrons to be used with unenriched natural uranium, and
therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such
reactors, increasing overall costs.
b.)
The use of heavy water as the moderator is the key to the PHWR (pressurized heavy water
reactor) system, enabling the use of natural uranium as the fuel (in the form of ceramic UO2),
which means that it can be operated without expensive uranium enrichment facilities. The
mechanical arrangement of the PHWR, which places most of the moderator at lower
temperatures, is particularly efficient because the resulting thermal neutrons are \"more thermal\"
than in traditional designs, where the moderator normally is much hotter. These features mean
that a HWR can use natural uranium and other fuels, and does so more efficiently than light
water reactors (LWRs).
Heavy-water reactors do have some drawbacks. Heavy water generally costs hundreds of dollars
per kilogram, though this is a trade-off against reduced fuel costs. The reduced energy content of
natural uranium as compared to enriched uranium necessitates more frequent replacement of
fuel; this is normally accomplished by use of an on-power refuelling system. The increased rate
of fuel movement through the reactor also results in higher volumes of spent fuel than in LWRs
employing enriched uranium. However, since unenriched uranium fuel accumulates a lower
density of fission products than enriched uranium fuel, it generates less heat, allowing more
compact storage.
c.)
It allows un-enriched uranium to be used as nuclear fuel.
Two graphite moderated reactors were involved in major accidents: An untested graphite
annealing process contributed to the Windscale fire (but the graphite itself did not catch fire), and
a graphite fire during the Chernobyl disaster contributed to the spread of radioactive material
(but was not a cause of the accident itself).
Solution
a.) Use of light water as moderator eliminates requirement of a coolant.
The use of water as a moderator is an important safety feature of PWRs, as any increase in
temperature causes the water to expand and become less dense; thereby reducing the extent to
which neutrons are slowed down and hence reducing the reactivity in the reactor.
The light water absorbs too many neutrons to be used with unenriched natural uranium, and
therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such
reactors, increasing overall costs.
b.)
The use of heavy water as the moderator is the key to the PHWR (pressurized heavy water
reactor) system, enabling the use of natural uranium as the fuel.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
More Related Content
More from himanshukausik409
STAT92E is present in Drosophila flies and the JAKSTAT pathway help.pdf
STAT92E is present in Drosophila flies and the JAK/STAT pathway helps in determining the P-
D(proximo distal) axis in leg and antennal imaginal discs of these flies. STAT92E is the
transcription factor which when phosphorylated migrates to the nucleus. It then binds specific
regulatory sequences to activate or repress the transcription of target genes. STAT92E represses
wg gene more robustly than dpp gene required for determining the P-D axis which is essential
for the formation of arthropod appendages i.e. legs and antennae. Thus if STAT92E is not
phosphorylated it will not migrate into the nucleus and will not act as a transcription factor to
regulate the genes responsible for the development of these appendages. Thus the fly with the
mutant STAT92E will not be able to develop proper leg with five segments and antennae with
six segments.
Solution
STAT92E is present in Drosophila flies and the JAK/STAT pathway helps in determining the P-
D(proximo distal) axis in leg and antennal imaginal discs of these flies. STAT92E is the
transcription factor which when phosphorylated migrates to the nucleus. It then binds specific
regulatory sequences to activate or repress the transcription of target genes. STAT92E represses
wg gene more robustly than dpp gene required for determining the P-D axis which is essential
for the formation of arthropod appendages i.e. legs and antennae. Thus if STAT92E is not
phosphorylated it will not migrate into the nucleus and will not act as a transcription factor to
regulate the genes responsible for the development of these appendages. Thus the fly with the
mutant STAT92E will not be able to develop proper leg with five segments and antennae with
six segments..
solid CO2 sublimes-dispersionCHCl3 boils-dispersion and dipole.pdf
solid CO2 sublimes
-dispersion
CHCl3 boils
-dispersion and dipole-dipole
Ice melts
-dispersion, dipole-dipole, and hydrogen bonding
Solution
solid CO2 sublimes
-dispersion
CHCl3 boils
-dispersion and dipole-dipole
Ice melts
-dispersion, dipole-dipole, and hydrogen bonding.
Smartphones have become the single most important digital device we .pdf
Smartphones have become the single most important digital device we own and require being
connected to a network to send and receive data.
Smartphones enable digital capabilities like view short video clips, play music and games, surf
the Web and transmit and receive corporate data, e-mail, messaging, wireless access to the
Internet, voice communication, and digital cameras.So we can perform many of the tasks of
today’s PCs on smartphones.
Examples of some brand name for smartphones : Apple, Blackberry, HTC, Huawei, iBall, Lava,
LeEco, LG, Micromax, Motorola, Microsoft, Nokia, Samsung, Sony, Spice, Xiomi
Wi-Fi allow users to access internet from different locations. We can use printers and servers
through Wi-Fi. We don\'t need printer for each computer and wired connection between them.
Bluetooth-enabled wireless technology provides an easy way to connect devices. We can access
videos, audio files, Web sites, and even video-conferencing through hotspots located in public
and private areas.
Wi-Fi speed can be increased by using a/b/g/n router. The range of Wireless-LAN (WLAN) or
Wi-Fi is around 20-25 feet indoors. So unauthorized access can be protected by using security.
High-speed cellular systems provide a way for users to access the Internet from virtually
anywhere at any time. More powerful cellular networks based on 2G, 3G, and now 4G. These
technology are expanding the amount and types of data users can access. User can access
services for voice, data, and high-quality streaming video.
So these are the advantages of smartphones over desktop and laptop.
Disadvantages can be security issues, durability, expensive and storage capacity.
Solution
Smartphones have become the single most important digital device we own and require being
connected to a network to send and receive data.
Smartphones enable digital capabilities like view short video clips, play music and games, surf
the Web and transmit and receive corporate data, e-mail, messaging, wireless access to the
Internet, voice communication, and digital cameras.So we can perform many of the tasks of
today’s PCs on smartphones.
Examples of some brand name for smartphones : Apple, Blackberry, HTC, Huawei, iBall, Lava,
LeEco, LG, Micromax, Motorola, Microsoft, Nokia, Samsung, Sony, Spice, Xiomi
Wi-Fi allow users to access internet from different locations. We can use printers and servers
through Wi-Fi. We don\'t need printer for each computer and wired connection between them.
Bluetooth-enabled wireless technology provides an easy way to connect devices. We can access
videos, audio files, Web sites, and even video-conferencing through hotspots located in public
and private areas.
Wi-Fi speed can be increased by using a/b/g/n router. The range of Wireless-LAN (WLAN) or
Wi-Fi is around 20-25 feet indoors. So unauthorized access can be protected by using security.
High-speed cellular systems provide a way for users to access the Internet from virtually
anywhere at any time. More powerful cell.
Since 2010, the authors have been on the faculty of a HBCU located i.pdf
Since 2010, the authors have been on the faculty of a HBCU located in Georgia. The authors are
the only full-time faculty, thus are responsible for teaching all accounting courses. The failure
rate has average thirty-five (35%) percent. Failure is defined as a student receiving a grade of
“D”, “F” or “W” in an accounting course. This failure rate was unacceptable, thus a search begin
to explore ways of reducing this rate without compromising the academic integrity required to
prepare students to become an accountant. This study explores a new teaching model designed to
improve students’ technical competencies while increasing their critical thinking skills. What
adjustments to a classroom lesson plan and teaching strategy are useful to improve interpersonal
communication, creativity, reasoning and analytical abilities? Does improvements in
interpersonal communication, creativity, reasoning and analytical abilities require abandoning
the traditional teaching model? Critical thinking includes analyzing, conceptualizing, reasoning
and evaluating. Research finds that these skills can be developed in learners if teaching strategies
evolve beyond memorization (Reinstein,2008). Accounting graduates are expected to possess a
healthy dose of critical thinking skills. This study explores a teaching model reflective of
cognitive thinking. Cognitive teaching increases the need to compare, contrast, group, and
memorize relevant accounting concepts. The literature argues that students have considerable
difficulty in solving accounting problems that are slightly different than those presented in the
classroom, even though the same concepts are being covered. The Pathways Commission has
called for improvements in accounting curriculum and teaching techniques (Bloom, 2013). The
quality of future accountants will be shaped by a need for improvement in critical thinking skills.
The purpose of this paper is to convey the authors’ result of using the ABCs of accounting
teaching model. SIGNIFICANCE OF THE PROBLEM The accounting profession requires more
creativity and innovative thinking in order to be competitive. Much of the literature argues that
teaching models that require students to memorize accounting rules and procedures fail to
cultivate critical thinking in problem solving. The Bedford Committee (1986) asserts that the
traditional accounting lectures fail to stimulate creativity and innovative thinking. Thus student
are not educational ready to enter the profession. The Pathway’s Commission finds that
accounting programs are overly invested in outmoded models. Bloom (2013) finds that students
increasingly exhibit difficulty solving complex accounting problems. The goal of teaching
should always embrace a pedagogy designed to discover a higher order of thinking. Higher order
critical thinking can be achieved if the teaching approach gets it right. Such is the pursuit of this
study. The five step process for developing higher level critical thinking skills.
Programimport java.util.Scanner; public class AreaOfRectangle {.pdf
Program:
import java.util.Scanner;
public class AreaOfRectangle {
public int length,breath;
public int getLength(){
return length;
}
public void setLength(int l){
length = l;
}
public int getBreath(){
return breath;
}
public void setBreath(int b){
breath = b;
}
AreaOfRectangle(){
length = 0;
breath = 0;
}
public static void main(String args[]){
AreaOfRectangle obj= new AreaOfRectangle();
Scanner sca = new Scanner(System.in);
String choice = new String();
do{
System.out.print(\"Enter Length : \");
obj.setLength(sca.nextInt());
System.out.print(\"Enter breath : \");
obj.setBreath(sca.nextInt());
System.out.println(\"Area : \"+ obj.getBreath() * obj.getLength());
System.out.println(\"Enter Choice : \");
choice = sca.next();
}while(!choice.equals(\"0\") && !choice.equals(\"Exit\") && !choice.equals(\"No\"));
}
}
Result:
Enter Length : 23
Enter breath : 34
Area : 782
Enter Choice :
23
Enter Length : 65
Enter breath : 67
Area : 4355
Enter Choice :
df
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
67
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
No
Solution
Program:
import java.util.Scanner;
public class AreaOfRectangle {
public int length,breath;
public int getLength(){
return length;
}
public void setLength(int l){
length = l;
}
public int getBreath(){
return breath;
}
public void setBreath(int b){
breath = b;
}
AreaOfRectangle(){
length = 0;
breath = 0;
}
public static void main(String args[]){
AreaOfRectangle obj= new AreaOfRectangle();
Scanner sca = new Scanner(System.in);
String choice = new String();
do{
System.out.print(\"Enter Length : \");
obj.setLength(sca.nextInt());
System.out.print(\"Enter breath : \");
obj.setBreath(sca.nextInt());
System.out.println(\"Area : \"+ obj.getBreath() * obj.getLength());
System.out.println(\"Enter Choice : \");
choice = sca.next();
}while(!choice.equals(\"0\") && !choice.equals(\"Exit\") && !choice.equals(\"No\"));
}
}
Result:
Enter Length : 23
Enter breath : 34
Area : 782
Enter Choice :
23
Enter Length : 65
Enter breath : 67
Area : 4355
Enter Choice :
df
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
67
Enter Length : 23
Enter breath : 56
Area : 1288
Enter Choice :
No.
Ques-1. how and why would an asthma attack attack have an impact on .pdf
Ques-1. how and why would an asthma attack attack have an impact on the FEV and MVV?
Answer:
Asthma is the reversible blockade of respiratory pathways, which causes difficulty in breathing
out. This causes tightness in the chest region, dyspnea, and expiratory wheezing. Asthma
pathophysiology includes the constriction of bronchiolar smooth muscles result in low alveolar
PO2 due to lower oxygen availability for respiration. PO2 is decreased and Pco2 is increased.
Lesser ratio of V/Q leading to reduced partial pressure of O2 (due impairment of the pulmonary
air exchange) and reduced excretion of CO2 leading to more PCO2 usually happens in apnea or
asthma.
Maximal voluntary ventilation (MVV): it is the total volume of air expired within a specific time
when repetitive maximal voluntary effort. In asthma MVV, is reduced due to allergic histamine
secretion in the air sacs (alveoli) & due to bronchoconstriction. This is due to inadequate space
availability to fill the air sacs during respiration process
The variables such as FEV1 (expiratory volume) will be decreased in “asthma- lung disease due
to narrowing of bronchioles” however, FVC (F vital capacity) is approximately normal therefore,
finally FEV1/FVC ration will be decreased with time.
Peak Expiratory Flow Rate (PEFR): also referred as FEV (forced expiratory volume). In the
above case, spirometry performed to assess the function of lungs and it depends on age and sex,
height. Given, 60% predicted PEFR means severe and obstruction of airways lungs due to
asthma.
Ques-2. What causes apnea that sometimes occurs after hyperventilation?
Answer:
Apnea usually reduced rate of breathing thereby volume of breathing is less. Hyperventilation
induces higher incidence of pulmonary edema or fluid accumulation in the lungs as a result
\"apnea\" is going to develop. PO2 is decreased and Pco2 is increased. Lesser ratio of V/Q
leading to reduced partial pressure of O2 (due to impairment of the pulmonary air exchange) and
reduced excretion of CO2 leading to more PCO2 usually happens in apnea
Solution
Ques-1. how and why would an asthma attack attack have an impact on the FEV and MVV?
Answer:
Asthma is the reversible blockade of respiratory pathways, which causes difficulty in breathing
out. This causes tightness in the chest region, dyspnea, and expiratory wheezing. Asthma
pathophysiology includes the constriction of bronchiolar smooth muscles result in low alveolar
PO2 due to lower oxygen availability for respiration. PO2 is decreased and Pco2 is increased.
Lesser ratio of V/Q leading to reduced partial pressure of O2 (due impairment of the pulmonary
air exchange) and reduced excretion of CO2 leading to more PCO2 usually happens in apnea or
asthma.
Maximal voluntary ventilation (MVV): it is the total volume of air expired within a specific time
when repetitive maximal voluntary effort. In asthma MVV, is reduced due to allergic histamine
secretion in the air sacs (alveoli) & due to bronchoconstriction. This is.
OSIOSI may be a abstract model that characterizes and standardize.pdf
OSI:
OSI may be a abstract model that characterizes and standardizes the communication functions of
a computing or telecommunication equipment regardless of their underlying structure and
technology being employed. The goal of OSI model is that the ability of various communication
systems with customary protocols. It partitions a communication system in abstraction layers. the
initial version of OSI model outlined seven layers. A layer serves the layer on top of it and is
served by the layer below it. for instance, a layer that has the error-free communication across
the network provides the trail required by the appliance on top of it, whereas it calls following
layer to send and receive packets that comprise the contents of that path. 2 instances at constant
layer area unit envisioned as connected by a horizontal association in this layer.
TCP/IP:
TCP/IP may be a core protocol of the web Protocol Suite (IPS). it\'s the essential communication
language or protocol of the web. It is used as a protocol during a exceedingly|in a very} personal
network either associate degree computer network or an extranet. TCP/IP may be a 2 layer
program. The higher or higher layer transmission control protocol, manages the grouping of a
message or file into smaller packets that area unit transmitted over the web and received by a
transmission control protocol layer that reassembles the packets into the initial message. The
lower layer science, handles the address a part of every packet to urge the correct destination.
every entranceway pc on the network checks this address to visualize wherever to forward the
message. even if some packets from constant message area unit routed otherwise than others,
they\'re going to be reassembled at the destination.
Solution
OSI:
OSI may be a abstract model that characterizes and standardizes the communication functions of
a computing or telecommunication equipment regardless of their underlying structure and
technology being employed. The goal of OSI model is that the ability of various communication
systems with customary protocols. It partitions a communication system in abstraction layers. the
initial version of OSI model outlined seven layers. A layer serves the layer on top of it and is
served by the layer below it. for instance, a layer that has the error-free communication across
the network provides the trail required by the appliance on top of it, whereas it calls following
layer to send and receive packets that comprise the contents of that path. 2 instances at constant
layer area unit envisioned as connected by a horizontal association in this layer.
TCP/IP:
TCP/IP may be a core protocol of the web Protocol Suite (IPS). it\'s the essential communication
language or protocol of the web. It is used as a protocol during a exceedingly|in a very} personal
network either associate degree computer network or an extranet. TCP/IP may be a 2 layer
program. The higher or higher layer transmission control protocol, manages .
Name of diagnosis obsessive compulsive personality disorder.Symp.pdf
Name of diagnosis : obsessive compulsive personality disorder.
Symptoms: general pattern of concern with orderliness, perfectionism, excessive attention to
details, mental and interpersonal control, and a need for control over one\'s environment. Upset if
plans dont go according to plan,easily frustrated, cannot relax during vacations.
Solution
Name of diagnosis : obsessive compulsive personality disorder.
Symptoms: general pattern of concern with orderliness, perfectionism, excessive attention to
details, mental and interpersonal control, and a need for control over one\'s environment. Upset if
plans dont go according to plan,easily frustrated, cannot relax during vacations..
Monthly interest rate = 8.40 12 = 0.7Effective anuual rate = (.pdf
Monthly interest rate = 8.40% / 12 = 0.7%
Effective anuual rate = (1 + 0.007)12 -1
Effective anuual rate = 0.0873 or 8.73%
Solution
Monthly interest rate = 8.40% / 12 = 0.7%
Effective anuual rate = (1 + 0.007)12 -1
Effective anuual rate = 0.0873 or 8.73%.
first phage electron micrographs were published in 1940 in Germany a.pdf
first phage electron micrographs were published in 1940 in Germany and proved the particulate
nature of bacteriophages. Phages and infected bacteria were first examined raw and unstained.
US American scientists introduced shadowing and freeze-drying. Phages appeared to be tailed
and morphologically heterogeneous. Phage types identified by early electron microscopy include
enterobacteriophages T4, T1, T7, T5, 7–11, ViI and Pseudomonas phage PB1.
electron micrographs portray steps seen in the development of phage particles within infected
colon bacilli growing in liquid media. These show rupturing cells, the early appearance of
bacteriophage as particles with nearly empty heads, the globular and fibrous fine structure of the
extruded bacterial protoplasm and instances of practically complete conversion of cellular
contents into bacteriophage.
capsid is the protein shell of a virus. It consists of several oligomeric structural subunits made of
protein called protomers. The observable 3-dimensional morphological subunits, which may or
may not correspond to individual proteins, are called capsomeres. The capsid encloses the
genetic material of the virus.
Large capsid can hold large gnetic material.
the lenght of tail can tell us about the extent of penetration.
Solution
first phage electron micrographs were published in 1940 in Germany and proved the particulate
nature of bacteriophages. Phages and infected bacteria were first examined raw and unstained.
US American scientists introduced shadowing and freeze-drying. Phages appeared to be tailed
and morphologically heterogeneous. Phage types identified by early electron microscopy include
enterobacteriophages T4, T1, T7, T5, 7–11, ViI and Pseudomonas phage PB1.
electron micrographs portray steps seen in the development of phage particles within infected
colon bacilli growing in liquid media. These show rupturing cells, the early appearance of
bacteriophage as particles with nearly empty heads, the globular and fibrous fine structure of the
extruded bacterial protoplasm and instances of practically complete conversion of cellular
contents into bacteriophage.
capsid is the protein shell of a virus. It consists of several oligomeric structural subunits made of
protein called protomers. The observable 3-dimensional morphological subunits, which may or
may not correspond to individual proteins, are called capsomeres. The capsid encloses the
genetic material of the virus.
Large capsid can hold large gnetic material.
the lenght of tail can tell us about the extent of penetration..
Ethical considerations of project managementSolutionEthical c.pdf
Ethical considerations of project management:
Solution
Ethical considerations of project management:.
EBOLA • Reservoir A deadly disease that is caused by infection du.pdf
EBOLA
• Reservoir: A deadly disease that is caused by infection due to Ebola virus. Its reservoir
remains unknown. However, on the basis of evidence and similar viruses, it is believed that the
virus us animal-borne and bats are the likely reservoir.
•Transmission: This virus spreads by direct contact through blood of an infected human or
animals. It may also occur through an object contaminated with body fluids. Semen or breast-
milk of a person after recovering from the disease is a potential possibility.
•Number of cases: 28652 reported from march 2014 to march 2016.
•Mortality rate: 11 deaths per 1000 people in a year.
INFLUENZA
•Reservoir: Humans are the main reservoirs of infection for influenza virus A. Wild birds like
ducks, geese and shorebirds carry avian influenza virus. It has also been reported from pigs and
horses.
• Transmission: It is spread by:
1. Direct contact with the infected patients.
2. Direct contact with objects contaminated with virus.
3. Inhaling aerosols laiden with viruses.
• Number of cases: According to WHO, about 3 to 5 million people are affected every year.
• Deaths: According to WHO, approximately 250000-500000 deaths occur annually.
AIDS
This is a deadly disease caused by Human Immunodeficiency Virus (HIV).
• Reservoir: Infected cells in central nervous system and male urinogenital tract are mostly
responsible. But the most potential resource is memory T-cells infected with HIV-1 DNA.
• Transmission:
It is transmitted through:
1. Body fluids; blood, semen, pre-seminal fluids, rectal fluids, vaginal fluids, breast milk.
2. Sexual intercourse with an infected partner.
3. Sharing contaminated syringes and needles.
4. From mother to her unborn child during pregnancy and childbirth.
5. Through organ transplantation.
• Number of cases: According to AVERT, there are about 36.7 million people affected and
living with HIV.
• Deaths: According to AVERT, approximately 1.1 million people died due to HIV.
Solution
EBOLA
• Reservoir: A deadly disease that is caused by infection due to Ebola virus. Its reservoir
remains unknown. However, on the basis of evidence and similar viruses, it is believed that the
virus us animal-borne and bats are the likely reservoir.
•Transmission: This virus spreads by direct contact through blood of an infected human or
animals. It may also occur through an object contaminated with body fluids. Semen or breast-
milk of a person after recovering from the disease is a potential possibility.
•Number of cases: 28652 reported from march 2014 to march 2016.
•Mortality rate: 11 deaths per 1000 people in a year.
INFLUENZA
•Reservoir: Humans are the main reservoirs of infection for influenza virus A. Wild birds like
ducks, geese and shorebirds carry avian influenza virus. It has also been reported from pigs and
horses.
• Transmission: It is spread by:
1. Direct contact with the infected patients.
2. Direct contact with objects contaminated with virus.
3. Inhaling aerosols laiden with viruses.
• Numbe.
deploy NIDSnetwork intrusion detection systems (NIDS) are procedur.pdf
deploy NIDS
network intrusion detection systems (NIDS) are procedures that provides the security and
manages the computers as well as the minimzes network traffic.
Solution
deploy NIDS
network intrusion detection systems (NIDS) are procedures that provides the security and
manages the computers as well as the minimzes network traffic..
D. The Delphi Technique is an example of a qualitative assessment te.pdf
D. The Delphi Technique is an example of a qualitative assessment technique. It is not used for
quantitative assessment, DRP, or BCP
Solution
D. The Delphi Technique is an example of a qualitative assessment technique. It is not used for
quantitative assessment, DRP, or BCP.
Average return=Total returntotal time period10.1=(11-18+24+14+X).pdf
Average return=Total return/total time period
10.1=(11-18+24+14+X)/5(where X=return for missing year)
(10.1*5)=31+X
50.5=31+X
Hence return for missing year =50.5+31
=19.5%
Solution
Average return=Total return/total time period
10.1=(11-18+24+14+X)/5(where X=return for missing year)
(10.1*5)=31+X
50.5=31+X
Hence return for missing year =50.5+31
=19.5%.
AnswerDifference In the category of nutrients, there are m.pdf
Answer:
Difference:
In the category of nutrients, there are monomers and polymers. Monomers are the \"building
blocks\" of large macromolecules, or any molecule chain created through condensation reactions.
These are the polymers, three or more monomers bonded together.
In the category of carbohydrates, there are monosaccharides, disaccharides, oligosacchaides, and
polysaccharides. Just from the prefixes, you can tell that the monosaccharides are monomers, the
disaccharides are two bonded monomers (monosaccharides) and oligosacchaides and
polysaccharides are made up of many monomers (monosaccharides).
The monosaccharides are just a single carbon ring (in the natural aqueous environment of an
organism). The monosaccharides include glucose, fructose, and galactose. The disaccharides are
two carbon rings bonded together by a glycosidic linkage in a condensation (dehydration)
reaction, which removes a molecule of water. Disaccharides include maltose (glucose + glucose),
lactose (glucose + galactose), sucrose (glucose + fructose), and more.
When we consume food, we are taking in the large polysacchaides such as starch and smaller
molecules such as maltose. We take these long molecules and digest them - break up their
glycosidic linkages until they are monosaccharides (monomers) that we can absorb throughout
out alimentary canal (usually in small intestine)
Contrast:
Monosaccharides and disaccharides are the two kinds of simple sugars, a form of carbohydrate.
In contrast to polysaccharides, which contain three or more sugars and are also known as
complex carbohydrates, monosaccharides and disaccharides contain one and two sugars,
respectively. Monosaccharides include glucose, fructose, and galactose. Disaccharides, by
contrast, include sucrose, lactose, and maltose, and these are made up of two monosaccharides
bonded together, such as glucose and fructose or even glucose with glucose. Monosaccharides
require the least effort by the body to break down and therefore are digested and subsequently
available for energy more quickly than disaccharides.
Solution
Answer:
Difference:
In the category of nutrients, there are monomers and polymers. Monomers are the \"building
blocks\" of large macromolecules, or any molecule chain created through condensation reactions.
These are the polymers, three or more monomers bonded together.
In the category of carbohydrates, there are monosaccharides, disaccharides, oligosacchaides, and
polysaccharides. Just from the prefixes, you can tell that the monosaccharides are monomers, the
disaccharides are two bonded monomers (monosaccharides) and oligosacchaides and
polysaccharides are made up of many monomers (monosaccharides).
The monosaccharides are just a single carbon ring (in the natural aqueous environment of an
organism). The monosaccharides include glucose, fructose, and galactose. The disaccharides are
two carbon rings bonded together by a glycosidic linkage in a condensation (dehydration)
reaction, which removes a.
Answer option CBacteria are considered as the most ancient living.pdf
Answer: option C
Bacteria are considered as the most ancient living organisms on earth. Bacteria were found about
250 million year old in sea salt beneath CARLSBAD, New Mexico
Solution
Answer: option C
Bacteria are considered as the most ancient living organisms on earth. Bacteria were found about
250 million year old in sea salt beneath CARLSBAD, New Mexico.
Android developers use the term layout to mean one of two things. Bo.pdf
Android developers use the term layout to mean one of two things. Both definitions apply to this
tutorial, and are, unfortunately used interchangeably in the Android development community.
The two definitions of layout are:
Android user interfaces can be defined as layout resources in XML or created programmatically.
A layout defines the visual structure for a user interface, such as the UI for an activity or app
widget. You can declare a layout in two ways:
The Android framework gives you the flexibility to use either or both of these methods for
declaring and managing your application\'s UI. For example, you could declare your
application\'s default layouts in XML, including the screen elements that will appear in them and
their properties. You could then add code in your application that would modify the state of the
screen objects, including those declared in XML, at run time.
The advantage to declaring your UI in XML is that it enables you to better separate the
presentation of your application from the code that controls its behavior. Your UI descriptions
are external to your application code, which means that you can modify or adapt it without
having to modify your source code and recompile. For example, you can create XML layouts for
different screen orientations, different device screen sizes, and different languages. Additionally,
declaring the layout in XML makes it easier to visualize the structure of your UI, so it\'s easier to
debug problems. As such, this document focuses on teaching you how to declare your layout in
XML. If you\'re interested in instantiating View objects at runtime, refer to theViewGroup and
View class references.
Defining an XML Layout Resource
The most convenient and maintainable way to design application user interfaces is by creating
XML layout resources. This method greatly simplifies the UI design process, moving much of
the static creation and layout of user interface controls and definition of control attributes, to the
XML, instead of littering the code. It creates a potential distinction between UI designers (who
concern themselves more with layout) and developers (who know Java and implement
application functionality). Developers can still alter the content of a screen programmatically
when necessary. Complex controls, like ListView or GridView, are usually populated with data
programmatically.
XML layout resources must be stored in the /res/layout project directory (or, in the case of
alternative resources, in a specially named sub-directory). It’s common practice to create an
XML layout resource for each screen in your application (closely tied to a specific Activity), but
this is not required. You could, in theory, create an XML layout resource and use it for different
activities, supplying different data on the screen. You can also componentized your layout
resources and include them within one another, if needed.
The following is a simple XML layout resource, a template with a LinearLayout con.
A. The above symptom and the resultant disease is due to the mutatio.pdf
The document discusses how Fragile X Syndrome is caused by trinucleotide repeat expansion mutations that increase in later generations, causing more severe symptoms. This phenomenon of genetic diseases worsening in subsequent generations is called genetic anticipation, and is explained by higher copy numbers of repeats being linked to more serious symptoms.
a.) Use of light water as moderator eliminates requirement of a cool.pdf
a.) Use of light water as moderator eliminates requirement of a coolant.
The use of water as a moderator is an important safety feature of PWRs, as any increase in
temperature causes the water to expand and become less dense; thereby reducing the extent to
which neutrons are slowed down and hence reducing the reactivity in the reactor.
The light water absorbs too many neutrons to be used with unenriched natural uranium, and
therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such
reactors, increasing overall costs.
b.)
The use of heavy water as the moderator is the key to the PHWR (pressurized heavy water
reactor) system, enabling the use of natural uranium as the fuel (in the form of ceramic UO2),
which means that it can be operated without expensive uranium enrichment facilities. The
mechanical arrangement of the PHWR, which places most of the moderator at lower
temperatures, is particularly efficient because the resulting thermal neutrons are \"more thermal\"
than in traditional designs, where the moderator normally is much hotter. These features mean
that a HWR can use natural uranium and other fuels, and does so more efficiently than light
water reactors (LWRs).
Heavy-water reactors do have some drawbacks. Heavy water generally costs hundreds of dollars
per kilogram, though this is a trade-off against reduced fuel costs. The reduced energy content of
natural uranium as compared to enriched uranium necessitates more frequent replacement of
fuel; this is normally accomplished by use of an on-power refuelling system. The increased rate
of fuel movement through the reactor also results in higher volumes of spent fuel than in LWRs
employing enriched uranium. However, since unenriched uranium fuel accumulates a lower
density of fission products than enriched uranium fuel, it generates less heat, allowing more
compact storage.
c.)
It allows un-enriched uranium to be used as nuclear fuel.
Two graphite moderated reactors were involved in major accidents: An untested graphite
annealing process contributed to the Windscale fire (but the graphite itself did not catch fire), and
a graphite fire during the Chernobyl disaster contributed to the spread of radioactive material
(but was not a cause of the accident itself).
Solution
a.) Use of light water as moderator eliminates requirement of a coolant.
The use of water as a moderator is an important safety feature of PWRs, as any increase in
temperature causes the water to expand and become less dense; thereby reducing the extent to
which neutrons are slowed down and hence reducing the reactivity in the reactor.
The light water absorbs too many neutrons to be used with unenriched natural uranium, and
therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such
reactors, increasing overall costs.
b.)
The use of heavy water as the moderator is the key to the PHWR (pressurized heavy water
reactor) system, enabling the use of natural uranium as the fuel.
More from himanshukausik409 (20)
STAT92E is present in Drosophila flies and the JAKSTAT pathway help.pdf
STAT92E is present in Drosophila flies and the JAKSTAT pathway help.pdf
solid CO2 sublimes-dispersionCHCl3 boils-dispersion and dipole.pdf
solid CO2 sublimes-dispersionCHCl3 boils-dispersion and dipole.pdf
Smartphones have become the single most important digital device we .pdf
Smartphones have become the single most important digital device we .pdf
Since 2010, the authors have been on the faculty of a HBCU located i.pdf
Since 2010, the authors have been on the faculty of a HBCU located i.pdf
Programimport java.util.Scanner; public class AreaOfRectangle {.pdf
Programimport java.util.Scanner; public class AreaOfRectangle {.pdf
Ques-1. how and why would an asthma attack attack have an impact on .pdf
Ques-1. how and why would an asthma attack attack have an impact on .pdf
OSIOSI may be a abstract model that characterizes and standardize.pdf
OSIOSI may be a abstract model that characterizes and standardize.pdf
Name of diagnosis obsessive compulsive personality disorder.Symp.pdf
Name of diagnosis obsessive compulsive personality disorder.Symp.pdf
Monthly interest rate = 8.40 12 = 0.7Effective anuual rate = (.pdf
Monthly interest rate = 8.40 12 = 0.7Effective anuual rate = (.pdf
first phage electron micrographs were published in 1940 in Germany a.pdf
first phage electron micrographs were published in 1940 in Germany a.pdf
Ethical considerations of project managementSolutionEthical c.pdf
Ethical considerations of project managementSolutionEthical c.pdf
EBOLA • Reservoir A deadly disease that is caused by infection du.pdf
EBOLA • Reservoir A deadly disease that is caused by infection du.pdf
deploy NIDSnetwork intrusion detection systems (NIDS) are procedur.pdf
deploy NIDSnetwork intrusion detection systems (NIDS) are procedur.pdf
D. The Delphi Technique is an example of a qualitative assessment te.pdf
D. The Delphi Technique is an example of a qualitative assessment te.pdf
Average return=Total returntotal time period10.1=(11-18+24+14+X).pdf
Average return=Total returntotal time period10.1=(11-18+24+14+X).pdf
AnswerDifference In the category of nutrients, there are m.pdf
AnswerDifference In the category of nutrients, there are m.pdf
Answer option CBacteria are considered as the most ancient living.pdf
Answer option CBacteria are considered as the most ancient living.pdf
Android developers use the term layout to mean one of two things. Bo.pdf
Android developers use the term layout to mean one of two things. Bo.pdf
A. The above symptom and the resultant disease is due to the mutatio.pdf
A. The above symptom and the resultant disease is due to the mutatio.pdf
a.) Use of light water as moderator eliminates requirement of a cool.pdf
a.) Use of light water as moderator eliminates requirement of a cool.pdf
Recently uploaded
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Recently uploaded (20)
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Concentration of A in water = mass of Avolume of water= 0.24100 .pdf
- 1. Concentration of A in water = mass of A/volume of water = 0.24/100 = 0.0024 g/mL Concentration of A in ether = mass of A/volume of ether = 2.70/100 = 0.027 g/mL Partition coefficient = concentration of A in ether/concentration of A in water = 0.027/0.0024 = 11.25 Solution Concentration of A in water = mass of A/volume of water = 0.24/100 = 0.0024 g/mL Concentration of A in ether = mass of A/volume of ether = 2.70/100 = 0.027 g/mL Partition coefficient = concentration of A in ether/concentration of A in water = 0.027/0.0024 = 11.25