1. PC Compatible ISA Cards
Features
Synchro, Resolver and LVDT Converters
Mix-Match up to 4 Single or Dual Converters/Cards
Transformer Isolated I/O Options
Cards with Resident Test Ability
Proven “Industry Standard Converters”
Reliable Register Based “LSI” Logic
Quadrature Incremental Encoder Outputs
On-Board Reference Supplies
True 16 Bit Word Level Interface
No external Supplies Required
Overview:
The “IB Series” product line contains IBM PC/AT and ISA 2.01 compatible synchro/resolver
/analog converters, and absolute encoder card systems.
These cards are ideally suited for many serious test, simulation, ATE, motion control, process
control, and data acquisitions type applications for both industrial and military concerns using
any IBM PC/AT compatible computer.
The IB and IBD (High Density) Series converters provide up to 4 and 8 channels of
IsolatedSynchro/Resolver LVDT/RVDT or encoder interface on a single, standard full
size IBM PC printed
circuit card.
Computer Conversions’ full line of “Industry Standard” Synchro/Resolver to Digital, and Digital
to Synchro/Resolver converters, CT’s and CDX’setc... are used to populate the same
standard PC boards.
Differing converters may be mixed to minimize real estate for specific applications. Both
industrial and military grade (extended) temperature range versions are available.
Transformer Isolation is offered for all AC inputs and outputs, and various Isolated DC
converters are available as standard product, eliminating concerns for ground loops, ground
interjected (intermittent and ghostly) field noise, differing potentials, and high voltage field
transients from affecting the card itself and the sensitive PC backplane.
Maximum versatility has been employed on all “IB” products to assure the universal
compatibility in addressing, timing, system, and specific computer hardware, software, and
backplane independence.
All “IB” cards are configured with a full 16 bit range of jumper-plug selectable mode of I/O
addressing. The interface is a solid, reliable, high-speed, true 16 bit “Word Level” register
access. Simply address the I/O, and read or write the data.
Buffered latches are provided on all data lines to assure stable read and write cycles as
commanded by the host. Address and control lines feature single point terminations to minimize
any loading of the backplane.
1 of 2
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. Status registers are provided for various levels of fault indication, Built-in-Test (where
applicable), and configuration criteria.
Software code fragments that may be used as drivers, are provided.
Request
Full
Data
Sheets
2 of 2
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
