-Burner tuning for efficiency
-NFPA and insurance safety checks
-System leak test (gas leaks)
-Burner operation reliability
-Burner and pilot inspection
-Preventative Maintenance
For more information on GSE's tools for severe accident management and preparedness, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
Direct Fired Process Air Heaters: Duct Style and Packaged Heaters
Indirect Fired Process Air Heaters: Non-Recirculating and Recirculating
Gun Style Process Air Heaters: For gaseous and/or liquid fuels
Integrating and Optimizing Suricata with FastStack™ Sniffer10G™Emulex Corporation
Join the Open Information Security Foundation (OSIF), Myricom and Emulex to learn about deploying and fine tuning Suricata to create an effective IDS/IPS system.
SIP Parity Actvity Group & Video Interoperability ReviewIMTC
SIP Parity Actvity Group & Video Interoperability Review
Charles Eckel - Technical Leader II, Media Experience and Analytics at Cisco, and the IMTC SIP Parity Activity Group Leader.
Telephony System is very important for all businesses today, and they try to keep it on service because of huge Impacts when are hit.
We are going to introduce some solutions for DR planing.
www.senatelecom.com
InvenSense ICS-43432 Digital MEMS Microphone teardown reverse costing report...Yole Developpement
Following the acquisition of MEMS Microphone Business Line of Analog Devices for 100M$ in October 2013, InvenSense releases a high performance digital MEMS Microphone for consumer applications.
The ICS-43432 is a digital microphone equipped with MEMS and amplification ASIC into a single chip. It is designed using CMOS process, it has I2S protocol interface and a high SNR of 65 dBA. It is assembled in a 6-pins LGA 4.0 x 3.0 x 1.0mm package with bottom port.
The MEMS transducer is a condenser microphone with a flexible poly-Si membrane and a rigid reference electrode manufactured on SOI substrate. Compared with state of the art MEMS Microphones, it presents a new design of the diaphragm with octagonal shape and central fixation.
The reverse costing report contains a detailed analysis of the device design and process, its manufacturing cost, as well as a benchmark with competitors’ MEMS microphones.
Easing the Path to Network Transformation - Network Transformation Experience...Liz Warner
Network transformation takes many forms: open platforms, virtualized infrastructure, containers and cloud native practices—and often a mix of any of these. Regardless of choice, the path to transformation typically requires new tools and new skills. Network Transformation Experience Kits provide a library of best-practice architecture and development guidelines addressing Industry needs in automation, interfaces standardization, security, resources management and more. These Experience Kits offer developers, technical leads, and other audiences a variety of materials needed to enable adoption of the new technologies and service-enabling capabilities needed for next-generation, open, agile and efficient networks. In this presentation, we will focus on containers technology to augment ease of use with high performance.
Check out our new Ethernet Services Suite, a major new range of professional services that are designed to help carriers design, deploy, operate and maintain Ethernet networks
Increasing ROI Through Simulation and the 'Digital Twin'GSE Systems, Inc.
Learn how you can use the plant simulator as a digital twin to maximize your investment and get beyond operations training into engineering design and virtual commissioning.
Developing a wireless sensor network (WSN) can be an awesome challenge. Achieving desired battery life, useful range from a low power RF transmitter and reliable embedded software operation are just a few of the challenges the wireless sensor network design faces. This presentation gives an overview of design considerations to help assure your WSN project is a success.
A management primer on the recently revised saftey standards for stamping presses and press brakes to explain to senior management n straight forward terms what needs to be done and simple steps they can take to ensure compliance at their company.
How Industrial Dryers Use Hot Air Generators:
Many types of industrial dryers use an indirect fired or direct fired air heater for hot air generation. Which dryer/ air heater combination works best is decided by the wet material to be dried.
The Four Most Common Types of Industrial Dryers:
Rotary Dryers
Pneumatic or Flash Dryers
Spray Dryers
Fluidized Bed Dryers
This presentation covers how each dryer works with air heaters and some of the industries that use air heaters with dryers.
For more information on GSE's tools for severe accident management and preparedness, go to GSES.com, email info@gses.com, and follow us on Twitter @GSESystems and Facebook.com/GSESystems. Thanks for viewing!
Direct Fired Process Air Heaters: Duct Style and Packaged Heaters
Indirect Fired Process Air Heaters: Non-Recirculating and Recirculating
Gun Style Process Air Heaters: For gaseous and/or liquid fuels
Integrating and Optimizing Suricata with FastStack™ Sniffer10G™Emulex Corporation
Join the Open Information Security Foundation (OSIF), Myricom and Emulex to learn about deploying and fine tuning Suricata to create an effective IDS/IPS system.
SIP Parity Actvity Group & Video Interoperability ReviewIMTC
SIP Parity Actvity Group & Video Interoperability Review
Charles Eckel - Technical Leader II, Media Experience and Analytics at Cisco, and the IMTC SIP Parity Activity Group Leader.
Telephony System is very important for all businesses today, and they try to keep it on service because of huge Impacts when are hit.
We are going to introduce some solutions for DR planing.
www.senatelecom.com
InvenSense ICS-43432 Digital MEMS Microphone teardown reverse costing report...Yole Developpement
Following the acquisition of MEMS Microphone Business Line of Analog Devices for 100M$ in October 2013, InvenSense releases a high performance digital MEMS Microphone for consumer applications.
The ICS-43432 is a digital microphone equipped with MEMS and amplification ASIC into a single chip. It is designed using CMOS process, it has I2S protocol interface and a high SNR of 65 dBA. It is assembled in a 6-pins LGA 4.0 x 3.0 x 1.0mm package with bottom port.
The MEMS transducer is a condenser microphone with a flexible poly-Si membrane and a rigid reference electrode manufactured on SOI substrate. Compared with state of the art MEMS Microphones, it presents a new design of the diaphragm with octagonal shape and central fixation.
The reverse costing report contains a detailed analysis of the device design and process, its manufacturing cost, as well as a benchmark with competitors’ MEMS microphones.
Easing the Path to Network Transformation - Network Transformation Experience...Liz Warner
Network transformation takes many forms: open platforms, virtualized infrastructure, containers and cloud native practices—and often a mix of any of these. Regardless of choice, the path to transformation typically requires new tools and new skills. Network Transformation Experience Kits provide a library of best-practice architecture and development guidelines addressing Industry needs in automation, interfaces standardization, security, resources management and more. These Experience Kits offer developers, technical leads, and other audiences a variety of materials needed to enable adoption of the new technologies and service-enabling capabilities needed for next-generation, open, agile and efficient networks. In this presentation, we will focus on containers technology to augment ease of use with high performance.
Check out our new Ethernet Services Suite, a major new range of professional services that are designed to help carriers design, deploy, operate and maintain Ethernet networks
Increasing ROI Through Simulation and the 'Digital Twin'GSE Systems, Inc.
Learn how you can use the plant simulator as a digital twin to maximize your investment and get beyond operations training into engineering design and virtual commissioning.
Developing a wireless sensor network (WSN) can be an awesome challenge. Achieving desired battery life, useful range from a low power RF transmitter and reliable embedded software operation are just a few of the challenges the wireless sensor network design faces. This presentation gives an overview of design considerations to help assure your WSN project is a success.
A management primer on the recently revised saftey standards for stamping presses and press brakes to explain to senior management n straight forward terms what needs to be done and simple steps they can take to ensure compliance at their company.
Similar to Combustion Burner Services- Stelter & Brinck (20)
How Industrial Dryers Use Hot Air Generators:
Many types of industrial dryers use an indirect fired or direct fired air heater for hot air generation. Which dryer/ air heater combination works best is decided by the wet material to be dried.
The Four Most Common Types of Industrial Dryers:
Rotary Dryers
Pneumatic or Flash Dryers
Spray Dryers
Fluidized Bed Dryers
This presentation covers how each dryer works with air heaters and some of the industries that use air heaters with dryers.
Duct Style Process Air Heaters are different from other Direct Fired Heaters because, as their name suggests, they are designed to fit into the processes’ duct work.
-Fresh Air Duct Section Heater- uses the oxygen present in the air stream
- Recirculating Duct Section Air Heater- used for dirty air streams; features a combustion blower
Indirectly Fired Air Heaters Produce Hot Air For Chemically Sensitive Processes. From spray dryers and fluid bed dryers to kilns and ovens, indirect fired air heaters are used in virtually every industry.
Watch a Video of a Ladle Preheater being Test-Fired In-House at Stelter & Brinck. Then, read the benefits gained from an industrial combustion equipment test-fire!
Stelter & Brinck Ladle Dryers, Ladle Preheaters, Tundish Dryers and Tundish Preheaters provide high preheating temperatures and uniform refractory drying in vessels to the metals industries
Is Your Industrial Combustion Equipment Reliable?Stelter & Brinck
Backed by Stelter & Brinck's in-house engineering team, S&B's experienced service technicians can bring your industrial combustion equipment up to NFPA standards through the following:
-Field Rebuilds
-Retrofitting
-Repairs
-Upgrades
Services & Equipment to Help You Reduce Energy and EmissionsStelter & Brinck
Stelter & Brinck's Combustion / Burner Services and Industrial Process Heat Equipment can help you reduce energy, curb emissions and save money simultaneously!
Thermal Oxidizer Data Sheet / Catalytic Oxidizer Data SheetStelter & Brinck
Stelter & Brinck’s thermal and catalytic oxidizers are commonly used in industries such as cement, ceramics, glass, detergents, alcohol, fertilizers, inorganic and organic chemicals, petrochemical, pharmaceuticals, polymers, resins, and PVC manufacturing
In order to determine which direct fired process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet below
In order to determine which indirect process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
AI for Every Business: Unlocking Your Product's Universal Potential by VP of ...
Combustion Burner Services- Stelter & Brinck
1. Combustion Field Services
*Provided by Top-of-the-line Equipment Manufacturers*
“Scheduled Burner Maintenance Program”:
-Burner tuning for efficiency
-NFPA and insurance safety checks
-System leak test (gas leaks)
-Burner operation reliability
-Burner and pilot inspection
Benefits of Combustion Services
-Preventative Maintenance
- Reduced downtime
- Reduced fuel costs
- Increased production
Training - Increased equipment life
-Burner tuning training - Improved safety & reliability
- Reduction in time spent on combustion issues,
-NFPA, GAP (IRI) and FM insurance compliance training allows you to spend more time on other job tasks
-Hands-on and classroom training - National Fire Protection Association, FM & GAP (IRI)
code compliance
Benefits of using S&B’s Highly Skilled
Combustion Equipment Parts Combustion Technicians
- Many parts are stocked in-house for same day - Backed by in-house engineering department
- We develop a PM schedule to fit your needs. We’ll
delivery so that your equipment downtime is kept to a remind you when you’re due for a PM, and we call you
minimum after your service visit to follow up.)
- Monthly safety training
-Complex sub-assemblies available - Current on NFPA standards
- Trained in controls, wiring and PLCs
- Experience with all types of combustion equipment
Field Rebuilds/ Upgrades/ Retrofitting - Service on any shift for same cost
- Logging of process variables (allowing us to spot
equipment trends)
-Promptly provided in-depth technical report
- Vans stocked with equipment parts
Stelter & Brinck
Call: 513-367-9300 Since 1956 www.stelterbrinck.com