Stelter & Brinck offer thermal and catalytic oxidizers for industries such as cement, ceramics, glass, and chemicals to control VOC emissions. These oxidizers can operate with or without heat recovery depending on the application. To determine which oxidizer is suitable, users can contact Stelter & Brinck or fill out an online data sheet requesting information about their emissions and facility utilities.

1. Thermal Oxidizer Data Sheet / Catalytic Oxidizer Data Sheet
Stelter & Brinck’s thermal and catalytic oxidizers are commonly used in industries such as cement,
ceramics, glass, detergents, alcohol, fertilizers, inorganic and organic chemicals, petrochemical,
pharmaceuticals, polymers, resins, and PVC manufacturing. Stelter & Brinck offer both oxidizers
with or without heat recovery, depending on your application. In order to determine which oxidizer
you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the
data sheet below found at http://www.stelterbrinck.com/thermal_oxidizer_rfq.htm
OXIDIZER
Application and Request for Quote Data Sheet
*Required
* Company * Contact
* E-Mail * Phone
Address Fax
City Date
State Project name
Zip Code Installation location
Independent source
Number of Sources operation?
Yes No
Flow (SCFM) per source
Total Flow SCFM
Emissions temperature Emissions pressure
ºF "w.c.
Number of 8hr shifts per day Operational days per week
VOC Mass or Volume in lbs./hr or ppm

2. Max VOC loading Min VOC loading
Particulate loading
Does the emissions stream contain any of the following catalyst poisons, suppressants, or fouling
agents?
Heavy Metal Sulfur Compound
Phosphates Alumina and Silica Dusts
Arsenic Compounds Silicones
Halogen Iron Oxides
Available Utilites
Electric Voltage/phase/hertz
Natural Gas PSIG
Propane PSIG
Fuel Oil No.1 No.2
Elevation 'ASL
Low winter temp ºF ºC
High summer temp ºF ºC
Keywords: Thermal Oxidizer, Catalytic Oxidizer, Request for Quote, Data Sheet, Stelter and Brinck,
Stelter, Brinck, Oxidizer Data Sheet