In order to determine which indirect process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet
Indirect fired water bath heaters are used in the oil and natural gas industry for a variety of applications including heating natural gas and preventing hydrate formation. TERI products include natural draft and forced draft water bath heaters and glycol dehydrators and are typically used when process temperatures do not exceed 170 degrees F.
This document discusses various types of heat exchangers including shell-and-tube, double-pipe, plate-and-frame, fired heaters, and aerial coolers. It provides details on shell-and-tube exchangers including baffles, tube layout, and TEMA classifications. Examples are given for sizing problems including determining heat duty, selecting the exchanger type, and calculating the number of tubes needed. Common software for heat exchanger design is also listed.
Fired heaters are used to provide heat through the combustion of fuel. They involve combustion fundamentals like the reaction of methane and oxygen. Fired heaters have a furnace design and use draft systems and air preheaters. They employ different types of burners like those used in hot oil heaters and regeneration gas heaters. The start-up process involves inspection, purging, lighting pilots and burners, and adjusting temperatures and flows. Operation requires monitoring air adjustment, temperatures, and addressing potential issues like deposits, failures, or flame-outs. Control strategies manage variables like temperatures, fuels, and flows.
Thermal Oxidizer Data Sheet / Catalytic Oxidizer Data SheetStelter & Brinck
Stelter & Brinck offer thermal and catalytic oxidizers for industries such as cement, ceramics, glass, and chemicals to control VOC emissions. These oxidizers can operate with or without heat recovery depending on the application. To determine which oxidizer is suitable, users can contact Stelter & Brinck or fill out an online data sheet requesting information about their emissions and facility utilities.
In order to determine which direct fired process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet below
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Ab 083-const-data-report-piping-systemstuankulintau
This document is a pressure piping construction and test data report. It provides information about the constructed piping including the contractor, owner, design details, materials used, tests performed, and certificates of compliance. The report documents that the piping was constructed according to the applicable codes and regulations. Inspectors have verified that examinations, testing, and inspections were completed and the piping conforms to the engineering design and code requirements.
Indirect fired water bath heaters are used in the oil and natural gas industry for a variety of applications including heating natural gas and preventing hydrate formation. TERI products include natural draft and forced draft water bath heaters and glycol dehydrators and are typically used when process temperatures do not exceed 170 degrees F.
This document discusses various types of heat exchangers including shell-and-tube, double-pipe, plate-and-frame, fired heaters, and aerial coolers. It provides details on shell-and-tube exchangers including baffles, tube layout, and TEMA classifications. Examples are given for sizing problems including determining heat duty, selecting the exchanger type, and calculating the number of tubes needed. Common software for heat exchanger design is also listed.
Fired heaters are used to provide heat through the combustion of fuel. They involve combustion fundamentals like the reaction of methane and oxygen. Fired heaters have a furnace design and use draft systems and air preheaters. They employ different types of burners like those used in hot oil heaters and regeneration gas heaters. The start-up process involves inspection, purging, lighting pilots and burners, and adjusting temperatures and flows. Operation requires monitoring air adjustment, temperatures, and addressing potential issues like deposits, failures, or flame-outs. Control strategies manage variables like temperatures, fuels, and flows.
Thermal Oxidizer Data Sheet / Catalytic Oxidizer Data SheetStelter & Brinck
Stelter & Brinck offer thermal and catalytic oxidizers for industries such as cement, ceramics, glass, and chemicals to control VOC emissions. These oxidizers can operate with or without heat recovery depending on the application. To determine which oxidizer is suitable, users can contact Stelter & Brinck or fill out an online data sheet requesting information about their emissions and facility utilities.
In order to determine which direct fired process air heater you need for your application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet below
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Ab 083-const-data-report-piping-systemstuankulintau
This document is a pressure piping construction and test data report. It provides information about the constructed piping including the contractor, owner, design details, materials used, tests performed, and certificates of compliance. The report documents that the piping was constructed according to the applicable codes and regulations. Inspectors have verified that examinations, testing, and inspections were completed and the piping conforms to the engineering design and code requirements.
Stelter & Brinck provides air heaters and heater service for industrial dryers. The document discusses four common types of industrial dryers - rotary dryers, pneumatic or flash dryers, spray dryers, and fluidized bed dryers - and how each works with air heaters to dry materials. It also lists some industries that use each dryer type and encourages contacting Stelter & Brinck with any questions.
Stelter & Brinck designs and manufactures heavy-duty mill equipment for the metals industry, including ladle dryers, tundish dryers, scrap dryers, aluminum sow dryers, paste heaters, SEN/SES preheaters, and specialty equipment. They have been in business since 1956 and provide equipment for drying refractory linings and preheating them prior to exposure to molten metal to prevent moisture issues. They also offer related services like maintenance, retrofitting, and combustion parts.
Duct Style Process Air Heaters are different from other Direct Fired Heaters because, as their name suggests, they are designed to fit into the processes’ duct work.
-Fresh Air Duct Section Heater- uses the oxygen present in the air stream
- Recirculating Duct Section Air Heater- used for dirty air streams; features a combustion blower
Indirectly Fired Air Heaters Produce Hot Air For Chemically Sensitive Processes. From spray dryers and fluid bed dryers to kilns and ovens, indirect fired air heaters are used in virtually every industry.
Watch a Video of a Ladle Preheater being Test-Fired In-House at Stelter & Brinck. Then, read the benefits gained from an industrial combustion equipment test-fire!
Stelter & Brinck Ladle Dryers, Ladle Preheaters, Tundish Dryers and Tundish Preheaters provide high preheating temperatures and uniform refractory drying in vessels to the metals industries
Is Your Industrial Combustion Equipment Reliable?Stelter & Brinck
Crane Composites realized their air heaters for 5 ovens were out of standards and unreliable. They hired Stelter & Brinck to upgrade the heaters. Stelter & Brinck custom designed upgrades for each oven zone. The upgrades decreased shutdowns and downtime by over 70% for Crane Composites, reduced maintenance expenses, and helped meet EPA standards.
Stelter & Brinck has produced scrap dryers and preheaters since 1956 to prepare scrap metal for foundries. These systems remove dirt and water from scrap, which is important for safety and efficiency reasons. Water expanding rapidly during melting could cause explosions, while preheating scrap decreases melting time and improves production rates for foundries working with metals like aluminum, iron, copper, tin, lead, steel, zinc, and chromium.
Services & Equipment to Help You Reduce Energy and EmissionsStelter & Brinck
Stelter & Brinck's Combustion / Burner Services and Industrial Process Heat Equipment can help you reduce energy, curb emissions and save money simultaneously!
Catalytic oxidizers employ a metal catalyst to destroy volatile organic compounds (VOCs) at a lower temperature than thermal oxidizers, using less fuel and resulting in lower operating costs. Stelter & Brinck's catalytic oxidizers also feature standard heat recovery which further reduces energy costs. The document includes a picture of one of Stelter & Brinck's catalytic oxidizer systems.
Stelter & Brinck was founded in 1922 by Henry Stelter and Larry Brinck as a manufacturer's representative agency selling burners and combustion parts. Over time, it evolved into an original equipment manufacturer known for its engineering expertise, high-quality products, and customer service. Today, Stelter & Brinck manufactures various lines of process heat equipment and provides combustion field services and parts to thousands of customers worldwide in numerous industries.
Manufacturers are increasingly focusing on managing energy consumption and reducing carbon emissions to comply with regulations, save costs, and improve profits. Analysis shows that companies leading in energy/emissions management have reduced energy use by 7% and emissions by 8% annually, exceeding goals and profit margins. Stelter & Brinck offers combustion services, oxidizers, efficient replacement equipment, fuel source conversions, and heat recovery systems to help manufacturers lower emissions and energy use.
S&B gun style air heaters are designed for industrial air streams that require high mass flows and temperatures and have low oxygen or dirt content. They are available gas-fired, oil-fired, or a combination and feature low-emission burners. Capacities can be up to 90 MMBtu/hr and are suitable for oil-fired operation.
Stelter & Brinck can help you switch from Electric to Natural GasStelter & Brinck
Stelter & Brinck can help companies switch from electric to natural gas heating. They provided a turn-key conversion for a steel mill, designing and installing a radiant tube/recuperative burner system that resulted in faster heat-up times and energy savings for the customer. According to a natural gas price forecast chart, natural gas prices have remained low in recent years, making it an affordable alternative to electric heating.
The document promotes converting equipment from electric to natural gas, citing that natural gas reserves are at their highest levels since 1977 and prices are expected to remain low through 2035 according to the Department of Energy. It notes that on average, natural gas costs $2.75 per million BTU compared to $11.43 per 100 KW for electricity, and encourages contacting Stelter & Brinck for a free savings estimate on converting equipment to natural gas.
Based out of Harrison, Ohio, Stelter & Brinck is has job openings! Stelter & Brinck is a mechanical engineering company, which manufacturers indirect air heaters, direct fired air heaters, thermal & catalytic oxidizers, steel & aluminum mill equipment, packaged combustion systems & more!
Stelter & Brinck manufactures and services aluminum and steel mill equipment including ladle and tundish dryers, dryer-preheaters, and preheaters. Their equipment is customizable and can be installed horizontally or vertically. It is easy to operate, reduces energy usage, and is durable. Stelter & Brinck also offers combustion field services like scheduled burner maintenance, field rebuilds, and training.
-Burner tuning for efficiency
-NFPA and insurance safety checks
-System leak test (gas leaks)
-Burner operation reliability
-Burner and pilot inspection
-Preventative Maintenance
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Stelter & Brinck provides air heaters and heater service for industrial dryers. The document discusses four common types of industrial dryers - rotary dryers, pneumatic or flash dryers, spray dryers, and fluidized bed dryers - and how each works with air heaters to dry materials. It also lists some industries that use each dryer type and encourages contacting Stelter & Brinck with any questions.
Stelter & Brinck designs and manufactures heavy-duty mill equipment for the metals industry, including ladle dryers, tundish dryers, scrap dryers, aluminum sow dryers, paste heaters, SEN/SES preheaters, and specialty equipment. They have been in business since 1956 and provide equipment for drying refractory linings and preheating them prior to exposure to molten metal to prevent moisture issues. They also offer related services like maintenance, retrofitting, and combustion parts.
Duct Style Process Air Heaters are different from other Direct Fired Heaters because, as their name suggests, they are designed to fit into the processes’ duct work.
-Fresh Air Duct Section Heater- uses the oxygen present in the air stream
- Recirculating Duct Section Air Heater- used for dirty air streams; features a combustion blower
Indirectly Fired Air Heaters Produce Hot Air For Chemically Sensitive Processes. From spray dryers and fluid bed dryers to kilns and ovens, indirect fired air heaters are used in virtually every industry.
Watch a Video of a Ladle Preheater being Test-Fired In-House at Stelter & Brinck. Then, read the benefits gained from an industrial combustion equipment test-fire!
Stelter & Brinck Ladle Dryers, Ladle Preheaters, Tundish Dryers and Tundish Preheaters provide high preheating temperatures and uniform refractory drying in vessels to the metals industries
Is Your Industrial Combustion Equipment Reliable?Stelter & Brinck
Crane Composites realized their air heaters for 5 ovens were out of standards and unreliable. They hired Stelter & Brinck to upgrade the heaters. Stelter & Brinck custom designed upgrades for each oven zone. The upgrades decreased shutdowns and downtime by over 70% for Crane Composites, reduced maintenance expenses, and helped meet EPA standards.
Stelter & Brinck has produced scrap dryers and preheaters since 1956 to prepare scrap metal for foundries. These systems remove dirt and water from scrap, which is important for safety and efficiency reasons. Water expanding rapidly during melting could cause explosions, while preheating scrap decreases melting time and improves production rates for foundries working with metals like aluminum, iron, copper, tin, lead, steel, zinc, and chromium.
Services & Equipment to Help You Reduce Energy and EmissionsStelter & Brinck
Stelter & Brinck's Combustion / Burner Services and Industrial Process Heat Equipment can help you reduce energy, curb emissions and save money simultaneously!
Catalytic oxidizers employ a metal catalyst to destroy volatile organic compounds (VOCs) at a lower temperature than thermal oxidizers, using less fuel and resulting in lower operating costs. Stelter & Brinck's catalytic oxidizers also feature standard heat recovery which further reduces energy costs. The document includes a picture of one of Stelter & Brinck's catalytic oxidizer systems.
Stelter & Brinck was founded in 1922 by Henry Stelter and Larry Brinck as a manufacturer's representative agency selling burners and combustion parts. Over time, it evolved into an original equipment manufacturer known for its engineering expertise, high-quality products, and customer service. Today, Stelter & Brinck manufactures various lines of process heat equipment and provides combustion field services and parts to thousands of customers worldwide in numerous industries.
Manufacturers are increasingly focusing on managing energy consumption and reducing carbon emissions to comply with regulations, save costs, and improve profits. Analysis shows that companies leading in energy/emissions management have reduced energy use by 7% and emissions by 8% annually, exceeding goals and profit margins. Stelter & Brinck offers combustion services, oxidizers, efficient replacement equipment, fuel source conversions, and heat recovery systems to help manufacturers lower emissions and energy use.
S&B gun style air heaters are designed for industrial air streams that require high mass flows and temperatures and have low oxygen or dirt content. They are available gas-fired, oil-fired, or a combination and feature low-emission burners. Capacities can be up to 90 MMBtu/hr and are suitable for oil-fired operation.
Stelter & Brinck can help you switch from Electric to Natural GasStelter & Brinck
Stelter & Brinck can help companies switch from electric to natural gas heating. They provided a turn-key conversion for a steel mill, designing and installing a radiant tube/recuperative burner system that resulted in faster heat-up times and energy savings for the customer. According to a natural gas price forecast chart, natural gas prices have remained low in recent years, making it an affordable alternative to electric heating.
The document promotes converting equipment from electric to natural gas, citing that natural gas reserves are at their highest levels since 1977 and prices are expected to remain low through 2035 according to the Department of Energy. It notes that on average, natural gas costs $2.75 per million BTU compared to $11.43 per 100 KW for electricity, and encourages contacting Stelter & Brinck for a free savings estimate on converting equipment to natural gas.
Based out of Harrison, Ohio, Stelter & Brinck is has job openings! Stelter & Brinck is a mechanical engineering company, which manufacturers indirect air heaters, direct fired air heaters, thermal & catalytic oxidizers, steel & aluminum mill equipment, packaged combustion systems & more!
Stelter & Brinck manufactures and services aluminum and steel mill equipment including ladle and tundish dryers, dryer-preheaters, and preheaters. Their equipment is customizable and can be installed horizontally or vertically. It is easy to operate, reduces energy usage, and is durable. Stelter & Brinck also offers combustion field services like scheduled burner maintenance, field rebuilds, and training.
-Burner tuning for efficiency
-NFPA and insurance safety checks
-System leak test (gas leaks)
-Burner operation reliability
-Burner and pilot inspection
-Preventative Maintenance
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf46adnanshahzad
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Digital Transformation Frameworks: Driving Digital Excellence
Indirect air heater_data_sheet
1. Indirect Fired Air Heater Data Sheet
Stelter & Brinck’s Indirect Air Heaters are commonly used to dry products in industries such as
food, chemical, and pharmaceutical. Stelter & Brinck not only has different models of standard
indirect fired air heaters, but S&B also custom manufactures indirect air heaters to fit
applications. In order to determine which indirect process air heater you need for your
application; you can either call Stelter & Brinck at 513-367-9300 or fill out the data sheet below
found at http://www.stelterbrinck.com/indirect_fired_airheater_rfq.htm
INDIRECT FIRED AIR HEATER
Application and Request For Quote Data Sheet
* = required
* Company Contact
Address Date
City * Phone
State Fax
Zip Code * E-Mail
You Are: Original Equipment Manufacturer Installation Location
Consulting Engineer Project name
End User
What type of quote would you like?
Budget quote Firm Quote
Has money been appropriated for this project? Yes No
Quote due date
Projected purchase date: (Mo/Yr)
Process Air Inlet Temp
ºF ºC Max: Min:
Process Air Outlet Temp
ºF ºC Max: Min:
Mass Flow (Air)
SCFM lbs./hr Max: Min:
2. Air Pressure
inches of water mm of water Max: Min:
Describe the equipment you would like us to quote and the process.
Fuel Type
(Natural Gas, Propane, Fuel Oil, Etc.)
Fuel Pressure (PSIG)
Electric Service (volts/phase/Hertz)
Electrical Classification of Heater Location
(If Hazardous Provide Class, Division, Group)
Insurance or other codes:
CE Canadian GAP (IRI) FM NFPA
Elevation
'ASL
Low winter temp
ºF ºC
High summer temp
ºF ºC
Location
Indoor Outdoor
Keywords: stelter & brinck, stelter, brinck, indirect fired air heater, indirect air heater, indirect process air heater, data sheet,
industrial air heater, combustion