Colleagues Brochure
•
0 likes•185 views
This document summarizes a project completed by Arnov Sett from February 13, 2014 to May 20, 2014 at Colleagues Consultants Pvt. Ltd. in Gurgaon, India. During the project, Arnov exercised project management skills, applied concepts in fluid mechanics, heat transfer, strength of materials, and computational fluid dynamics. Software skills in CATIA, ANSYS, and Microsoft Project 2013 were also employed. The results of the research work were used to generate design configurations for a rotary kiln and positions for cooling fans installed at a cement plant in Nepal in July 2013. Using a project management tool, the total cost of the research work was calculated to be Rs. 202,500.
Report
Share
Report
Share
Download to read offline
![By ARNOV SETT [arnovsett@gmail.com]
Ø I
did
this
project
from
13th
February
2014
to
20th
May
2014
in
Colleagues
Consultants
Pvt.
Ltd.,
Gurgaon
(India).
Ø During
this
project
I
exercised
my
Project
Management
Skills,
concepts
from
Fluid
Mechanics,
Heat
transfer,
Strength
of
Materials,
Computational
Fluid
Dynamics
and
employed
my
software
skill
of
CATIA,
ANSYS
and
Microsoft
Project
2013.
Ø The
results
of
this
research
work
were
utilized
to
generate
solutions,
which
would
determine
the
design
configurations
of
the
Rotary
Kiln
and
the
positions
of
the
cooling
fans
for
the
Kiln
that
has
been
installed
in
Cosmos
Cement
Plant,
Nepal
in
July
2013.
Ø The
cost
of
the
research
work
was
calculated
using
PM
tool,
which
amounted
to
Rs.202,500.](https://image.slidesharecdn.com/14262e1b-bf94-4d16-8d5e-ce115793ef1d-150217004014-conversion-gate02/85/Colleagues-Brochure-1-320.jpg)
Recommended
K.S.D.A.REDDY@AMAR (2)
K. Amarnatha Reddy is seeking an ambitious career where he can use his skills and potential to achieve goals and advance his career. He has over 10 years of experience as a civil supervisor for various construction companies in India, working on projects like tunnels, roads, and buildings. Some of his past employers include Sri Radika Constructions, Ivrcl Infrastructures & Projects Ltd, and Ektha.com Pvt. Ltd. He possesses strong communication skills and can work under pressure while eager to learn new things. Reddy is confident, single, and enjoys listening to music and reading books in his free time.
Civil Engineer actively looking for new opportunities in civil field
Nitin Garg is a civil engineer from Punjab Technical University in India seeking a career opportunity in Australia. He has a Bachelor of Technology in Civil Engineering, over 1.5 years of work experience as a project coordinator for an EPC firm in India, and possesses a Skilled Graduate Visa and full Australian driving license. His technical skills include structural analysis software like STAAD Pro and ETABS, CAD programs, and design/project management experience.
Sivadas Chandrasekharan 5
Sivadas Chandrasekharan is seeking a challenging position to further enhance his knowledge and management skills. He has over 25 years of experience in civil engineering projects including designing plans, preparing estimates, arranging labor, and supervising construction sites. His experience includes working as a site engineer and supervisor on projects in India and the UAE. Currently, he owns a design and construction office in Palakkad, Kerala where he prepares drawings and oversees construction work.
cv of nirav parmar-sr.civil engg
Nirav Chandulal Parmar is a civil engineer seeking a new position. He has over 10 years of experience in civil engineering projects in Ahmedabad, including work on residential and commercial buildings. His responsibilities have included supervision, quality control, planning, cost estimation, and ensuring projects are completed on time. He is proficient in AutoCAD and Microsoft Office applications.
CHETHAN.K _B.E-Mechanical
This document is a resume for Chethan K, who has a Bachelor's degree in Mechanical Engineering. He has over 3 years of experience as a Piping Stress Engineer at Neilsoft Ltd in Pune, India. Some of the key projects he has worked on include projects for Bouygues Batiment International in Qatar and Neste Jacobs. His responsibilities include piping system analysis, resolving pipe loads, preparing reports and drawings, and project management. He is proficient in several piping design and CAD software. He seeks a position as a Piping Stress Engineer that allows him to contribute to both organizational and personal goals.
Vishal P. Desai
Vishal P. Desai provides his contact information and objective. He completed his BE in Civil Engineering from B.V.M. Engineering College in Gujarat in 2013 with a CGPA of 8.01. His skills include using Staad Pro, Autocad, MS Office, and computer proficiency in English, Hindi and Gujarati. He has expertise in preparing bar bending schedules, studying drawings, project planning, bills, site supervision, checklists, guiding laborers, reports, and safety guidelines. He also lists his address.
Vinod_Pradhan_CV
Vinod Pradhan seeks a job in a company that allows him to develop his skills and expand his knowledge. He has over 15 years of experience in mechanical engineering and project execution roles in the cement industry. His experience includes installation, erection, and commissioning of plants and machinery. He has a diploma in mechanical engineering and has worked on projects in Rajasthan, Andhra Pradesh, and Gujarat.
Indu Resume
Indu Bai K.S. is seeking an opportunity to utilize her skills and abilities to achieve organizational objectives. She has been working as a Project Manager at Swathi Associates Pvt Ltd since August 2014. She has a BE in Civil Engineering from UBDTCE with 73.45% and has technical skills in estimation, surveying, AutoCAD, and Microsoft Office. Her project evaluated the performance of manufactured sand in concrete mixtures and found it can replace up to 40% of natural sand while achieving higher compressive strengths.
Recommended
K.S.D.A.REDDY@AMAR (2)
K. Amarnatha Reddy is seeking an ambitious career where he can use his skills and potential to achieve goals and advance his career. He has over 10 years of experience as a civil supervisor for various construction companies in India, working on projects like tunnels, roads, and buildings. Some of his past employers include Sri Radika Constructions, Ivrcl Infrastructures & Projects Ltd, and Ektha.com Pvt. Ltd. He possesses strong communication skills and can work under pressure while eager to learn new things. Reddy is confident, single, and enjoys listening to music and reading books in his free time.
Civil Engineer actively looking for new opportunities in civil field
Nitin Garg is a civil engineer from Punjab Technical University in India seeking a career opportunity in Australia. He has a Bachelor of Technology in Civil Engineering, over 1.5 years of work experience as a project coordinator for an EPC firm in India, and possesses a Skilled Graduate Visa and full Australian driving license. His technical skills include structural analysis software like STAAD Pro and ETABS, CAD programs, and design/project management experience.
Sivadas Chandrasekharan 5
Sivadas Chandrasekharan is seeking a challenging position to further enhance his knowledge and management skills. He has over 25 years of experience in civil engineering projects including designing plans, preparing estimates, arranging labor, and supervising construction sites. His experience includes working as a site engineer and supervisor on projects in India and the UAE. Currently, he owns a design and construction office in Palakkad, Kerala where he prepares drawings and oversees construction work.
cv of nirav parmar-sr.civil engg
Nirav Chandulal Parmar is a civil engineer seeking a new position. He has over 10 years of experience in civil engineering projects in Ahmedabad, including work on residential and commercial buildings. His responsibilities have included supervision, quality control, planning, cost estimation, and ensuring projects are completed on time. He is proficient in AutoCAD and Microsoft Office applications.
CHETHAN.K _B.E-Mechanical
This document is a resume for Chethan K, who has a Bachelor's degree in Mechanical Engineering. He has over 3 years of experience as a Piping Stress Engineer at Neilsoft Ltd in Pune, India. Some of the key projects he has worked on include projects for Bouygues Batiment International in Qatar and Neste Jacobs. His responsibilities include piping system analysis, resolving pipe loads, preparing reports and drawings, and project management. He is proficient in several piping design and CAD software. He seeks a position as a Piping Stress Engineer that allows him to contribute to both organizational and personal goals.
Vishal P. Desai
Vishal P. Desai provides his contact information and objective. He completed his BE in Civil Engineering from B.V.M. Engineering College in Gujarat in 2013 with a CGPA of 8.01. His skills include using Staad Pro, Autocad, MS Office, and computer proficiency in English, Hindi and Gujarati. He has expertise in preparing bar bending schedules, studying drawings, project planning, bills, site supervision, checklists, guiding laborers, reports, and safety guidelines. He also lists his address.
Vinod_Pradhan_CV
Vinod Pradhan seeks a job in a company that allows him to develop his skills and expand his knowledge. He has over 15 years of experience in mechanical engineering and project execution roles in the cement industry. His experience includes installation, erection, and commissioning of plants and machinery. He has a diploma in mechanical engineering and has worked on projects in Rajasthan, Andhra Pradesh, and Gujarat.
Indu Resume
Indu Bai K.S. is seeking an opportunity to utilize her skills and abilities to achieve organizational objectives. She has been working as a Project Manager at Swathi Associates Pvt Ltd since August 2014. She has a BE in Civil Engineering from UBDTCE with 73.45% and has technical skills in estimation, surveying, AutoCAD, and Microsoft Office. Her project evaluated the performance of manufactured sand in concrete mixtures and found it can replace up to 40% of natural sand while achieving higher compressive strengths.
AGHIL-RESUME
This document contains the resume of Aghil.P. It provides his personal and contact details, including date of birth, nationality, languages known, and contact information. It outlines his career objective in mechanical engineering and design. It then details his professional experience, including roles at Buhler India, Sadhana Enviro Engineering Services, and ISRO, where he gained experience in design, analysis, and testing. It lists the academic and technical skills he has developed. Finally, it provides details on his educational qualifications and achievements.
resume 66
K. Saikumar's resume summarizes his educational background, professional experience, projects, and personal details. He received a Bachelor of Technology in Mechanical Engineering from GMR institute of technology from 2009 to 2013. Since 2016, he has worked as an Expert Answerer at Chegg India, providing solutions with clear explanations. His projects include designing and fabricating a pedal-operated sieving machine to increase sieving speed and reduce human effort, as well as maintaining crane wheels to reduce replacement costs. Additional details note his proficiency in AutoCAD, age, parents' names, languages known, and hobbies.
Resume_Chethan 2016
Chethan Kumar N has over 3 years of experience as a structural design engineer and 2 years as a site engineer. He has expertise in STAAD-Pro, ETABS, SAP2000, AutoCAD and MS Office. Some of the projects he has worked on include residential, commercial, industrial and infrastructure projects in India and Africa. He holds a Master's degree in Structural Engineering and is currently working as a Design Engineer at Sigma Consultants in Bangalore.
Summer Project - Certificate - Datacode
Mr. Manish Pant, a student at University of Petroleum & Energy Studies studying B. Tech (Petroleum Engineering) & MBA (Upstream asset management), successfully completed his summer project titled 'Industry Survey to assess technical manpower requirement by Geoscientific Industry' with DATACODE in Nagpur, India under the guidance of Mr. S. Karunakar Rao. The project was part of his curriculum and lasted from June 26th to August 31st 2011. DATACODE found Mr. Pant to be sincere, hardworking, technically sound and result oriented.
TOUSIM QURESHI RESUME
Tousim Qureshi is a civil site engineer with over 2 years of experience managing construction projects. He has worked as a site engineer for 3 companies in Nagpur, India, overseeing all construction activities including planning, estimating, materials procurement, and ensuring quality standards. He holds a Bachelor's degree in civil engineering and has expertise in AutoCAD and Microsoft Office applications.
Resume
Amber Gupta is a Mechanical Engineer with 3 years of experience in project management. She is seeking a position that allows her to utilize her expertise to successfully manage projects from inception to completion while ensuring optimal resource utilization. Her strengths include requirements analysis, project management, process improvement, and safety management. She has experience supervising all stages of projects including estimation, execution, installation, and commissioning to deliver on time and on budget.
Scaffolding on Rent in India
Jyoti engineering provides scaffolding rental services in India at reasonable prices, supplying scaffolding in bulk quantities to builders and contractors across the country. They can be contacted at 9250006292 for scaffolding rental needs.
Resume (1)
Ankit Verma is seeking a position as a Project Engineer where he can utilize his knowledge and skills. He has over 3 years of experience in designing, coordinating, and executing air purification and biogas projects. Some of his responsibilities include developing drawings, coordinating teams, ensuring quality and safety, and providing technical support to clients. He is proficient in AutoCAD and has a Bachelor's degree in Mechanical Engineering.
Architect
Rajesh Kumar is seeking a position as a Manager Architect in a reputable organization. He has over 10 years of experience working as an architect and project coordinator for various construction companies. His responsibilities have included coordinating with consultants, preparing drawings and submissions, obtaining necessary approvals, handling PMC work, and overseeing site execution. He holds a B.A. degree and diplomas in Civil Engineering and Computer skills.
Resume
Krishnendu Majumder is seeking a position in project sales, design, estimation, or tendering with over 20 years of experience in designing DG set projects. He currently serves as Manager of Investor Business at Tractors India Private Limited, where he heads the design and estimation team. Some of his project experience includes estimating a 40MW project for Tata Steel worth over 100 crore rupees and a 2x2000kVA project for TCS in Kolkata worth 8 crore rupees. He has expertise in technical sales, design, estimation, attending meetings, and coordinating with suppliers like Caterpillar.
internship certi
This certificate verifies that Ashutosh Malvankar completed an internship as a Website Developer at Starszy Technologies Pvt. Ltd. in New Delhi, India from July 1st to August 2nd, 2016. During his internship, he successfully re branded the company's official website, completed the project on time, and showed strong design skills and a self-motivated attitude to learn. The CEO wishes him the best in future endeavors.
MEGHA M_STRUCTURAL ENG RESUME - 1
Megha Mooleemani is a civil and structural engineer with over 2 years of experience in technical and management roles. She currently works as an Assistant Engineer at Novel Engineering Consultants Pvt Ltd in Bangalore. She has experience in structural design and analysis, project planning, site supervision, and maintaining project reports. Her past experience includes roles at Consultants Consortium and Suvidha Innovation where she designed and analyzed various residential and commercial buildings using software like STAAD Pro. She holds a Master's degree in Structural Engineering and Bachelor's degree in Civil Engineering.
Vikash Kumar C.V
Vikash Kumar has over 11 years of experience as an MEP engineer. He has expertise in plumbing, firefighting installation, testing, commissioning, and maintenance for high-rise residential and commercial buildings. His work experience includes senior project engineer roles for Sukoi Engineers Pvt Ltd and Larsen & Toubro, where he managed MEP works, quality control, and coordinated vendors and teams. He holds a Diploma in Mechanical Engineering and training in AutoCAD and MS Office software.
Abhinav Mishra cv
This document is Abhinav Mishra's resume applying for the position of Civil Engineer (Billing/QS & Planning). The summary highlights:
- Abhinav Mishra currently works as an Assistant Engineer-Planning, QS & Billing at Era Landmarks Ltd. in Noida since July 2014. He has experience working on multiple high-rise residential projects with total costs ranging from Rs. 180-392 crores.
- His responsibilities include preparation of bills, BOQs, work orders, schedules, and reconciliations. He also monitors progress, coordinates with clients/contractors, and attends weekly meetings.
- Abhinav Mishra has a B.Tech in
Karthickeyan resume
C. Karthickeyan is a civil engineer seeking a challenging position. He has over 5 years of experience as a site engineer on various projects in India and Qatar. His responsibilities included construction planning, scheduling, quantity take-offs, formwork and concrete work inspection. He holds a Bachelor's degree in Civil Engineering from Annamalai University and is proficient in Tamil, English and construction software. He is currently looking for new opportunities and can be reached at his provided contact information.
UTPAL MONDAL CV ( updated)
Utpal Mondal has over 11 years of experience as a bending surveyor for pipeline construction projects. He has worked on numerous pipeline projects of varying diameters for major clients like IOCL, GAIL India Ltd., and ONGC. His responsibilities include executing bending surveys, route surveys, autoCAD drawings, and handling surveying instruments. He is currently working as a bending surveyor for Adorn Infra Energy's Haldia-Paradip Gas Pipeline Project. Utpal Mondal holds diplomas in surveying and drawing as well as a B.Com degree, and has skills in AutoCAD and Microsoft Office applications.
Cv ahmed mahmoud
Ahmed Mahmoud is a civil engineer from Maghagha, Egypt with over 5 years of experience working on construction projects in Saudi Arabia. He has worked as a site engineer and project engineer for Asmar Al-Khaleej Cont. Est. on various projects for King Fahd International Airport, Saudi Electricity Company, Saudi Oil Company (ARAMCO), and Saudi Aramco, where his responsibilities included managing civil engineering works like concrete work, excavation, and site activities. He holds a bachelor's degree in civil engineering from Minia University in Egypt.
Resume_Ankit
Ankit Singhvi has over 4 years of experience in cement projects. He is currently working as an Engineer (Mechanical Project) for Shree Cement Ltd. in Ras, Rajasthan, where his responsibilities include project planning, engineering and procurement. Previously he worked for 1.5 years as a Graduate Engineer Trainee at PetronEngineering Constructions Limited in Chittorgarh, where he helped with the installation and commissioning of a 3.3 million MT cement plant. He received a B.Tech. in Mechanical Engineering from GIT Jaipur with 61% marks.
lokesh
K. Lokesh Yadav is seeking a position as an engineer where he can utilize his planning, design, and project management skills. He has a Bachelor's degree in civil engineering and over 2 years of experience as a site engineer. His skills include AutoCAD, STAAD Pro, site engineering, quality control, and quantity estimation. He is currently a site engineer for Smile Inc. where he is responsible for maintaining the site, quality control, reporting, implementation of designs, estimating works, preparing bills, supervising labor, and monitoring progress.
Numerical Simulation of Hot Air Drying Kiln Velocity Field Based on Computati...
In this paper, the energy-efficient hot air drying kiln adopts innovative -designed guide air cover to control the speed of airflow velocity and the direction of the air flow in the fan outlet, so that the horizontal airflow in the fan outlet forms a smooth jets transferred to the vertical wind tunnel smoothly, and using computational fluid dynamics (CFD) software SCT/tetra to complete numerical simulation and analysis of air drying kiln flow velocity field , and compares in detail the before and after optimization design in different spatial positions of the velocity distribution in the cross section of drying kiln. The simulation results show that: After the adoption of new technology optimization, the drying kiln improves the uniformity of air flow field distribution, advances the drying efficiency and wood drying quality, also reduces the energy consumption, and lays the foundation of energy-efficient hot air drying kiln applications.
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...Synergis Engineering Design Solutions
We will go through how to analyze a design with Simulation CFD from beginning to end. We will start at the Inventor model and end at visualizing the results. In addition to seeing the actual workflow we will talk about how simulation tools can be used throughout the life of a design project, from early concept to final testing.Autodesk CFD for better building design by ZHU ge
Autodesk CFD for better building design by ZHU geThe Hong Kong Institute of Building Information Modelling (HKIBIM)
Seminar Presentation file for "Autodesk CFD for better building design" by Mr. ZHU ge.
Event Details
Seminar: Autodesk CFD for Better Building Design
Co-organized by: Autodesk / HKIBIM / IVE BIM Centre
With your BIM model, Autodesk® Simulation CFD software can provides computational fluid dynamics and thermal simulation analysis to help you create better interior and exterior design. A range of CFD modeling and thermal modeling tools are included for architectural and mechanical, electrical, and plumbing (MEP) applications. Model radiant heat transfer and occupant comfort; better predict contaminant dispersion and smoke migration in and around buildings. Study the long-term effects of diurnal heating. The Design Study Environment allows you to automate the creation of design studies, compare critical values, and predict design performance, optimize designs, and validate behavior before construction.
For more information about Autodesk® CFD: http://www.autodesk.com/products/cfd/overview
Seminar details:
Date & Time: 9-Sep-2015; 7:00pm – 8:30pm
Speaker: Ge Zhu, Technical Sales Specialist, Autodesk
He is major in Engineering Thermophysics, Master of Huazhong University of Science and Technology. He has 7 years for electrical thermal and datacenter CFD simulation experience.
Location: Lecture Theater LT-01, G/F, IVE (Morrison Hill), 6 Oi Kwan Road, Hong Kong
Agenda:
1. Why Simulation
2. Auotdesk CFD Features
3. Key Application Areas of Autodesk CFD
For any enquiry, please contact Mr. Waiky Leung at waiky.leung@autodesk.comMore Related Content
What's hot
AGHIL-RESUME
This document contains the resume of Aghil.P. It provides his personal and contact details, including date of birth, nationality, languages known, and contact information. It outlines his career objective in mechanical engineering and design. It then details his professional experience, including roles at Buhler India, Sadhana Enviro Engineering Services, and ISRO, where he gained experience in design, analysis, and testing. It lists the academic and technical skills he has developed. Finally, it provides details on his educational qualifications and achievements.
resume 66
K. Saikumar's resume summarizes his educational background, professional experience, projects, and personal details. He received a Bachelor of Technology in Mechanical Engineering from GMR institute of technology from 2009 to 2013. Since 2016, he has worked as an Expert Answerer at Chegg India, providing solutions with clear explanations. His projects include designing and fabricating a pedal-operated sieving machine to increase sieving speed and reduce human effort, as well as maintaining crane wheels to reduce replacement costs. Additional details note his proficiency in AutoCAD, age, parents' names, languages known, and hobbies.
Resume_Chethan 2016
Chethan Kumar N has over 3 years of experience as a structural design engineer and 2 years as a site engineer. He has expertise in STAAD-Pro, ETABS, SAP2000, AutoCAD and MS Office. Some of the projects he has worked on include residential, commercial, industrial and infrastructure projects in India and Africa. He holds a Master's degree in Structural Engineering and is currently working as a Design Engineer at Sigma Consultants in Bangalore.
Summer Project - Certificate - Datacode
Mr. Manish Pant, a student at University of Petroleum & Energy Studies studying B. Tech (Petroleum Engineering) & MBA (Upstream asset management), successfully completed his summer project titled 'Industry Survey to assess technical manpower requirement by Geoscientific Industry' with DATACODE in Nagpur, India under the guidance of Mr. S. Karunakar Rao. The project was part of his curriculum and lasted from June 26th to August 31st 2011. DATACODE found Mr. Pant to be sincere, hardworking, technically sound and result oriented.
TOUSIM QURESHI RESUME
Tousim Qureshi is a civil site engineer with over 2 years of experience managing construction projects. He has worked as a site engineer for 3 companies in Nagpur, India, overseeing all construction activities including planning, estimating, materials procurement, and ensuring quality standards. He holds a Bachelor's degree in civil engineering and has expertise in AutoCAD and Microsoft Office applications.
Resume
Amber Gupta is a Mechanical Engineer with 3 years of experience in project management. She is seeking a position that allows her to utilize her expertise to successfully manage projects from inception to completion while ensuring optimal resource utilization. Her strengths include requirements analysis, project management, process improvement, and safety management. She has experience supervising all stages of projects including estimation, execution, installation, and commissioning to deliver on time and on budget.
Scaffolding on Rent in India
Jyoti engineering provides scaffolding rental services in India at reasonable prices, supplying scaffolding in bulk quantities to builders and contractors across the country. They can be contacted at 9250006292 for scaffolding rental needs.
Resume (1)
Ankit Verma is seeking a position as a Project Engineer where he can utilize his knowledge and skills. He has over 3 years of experience in designing, coordinating, and executing air purification and biogas projects. Some of his responsibilities include developing drawings, coordinating teams, ensuring quality and safety, and providing technical support to clients. He is proficient in AutoCAD and has a Bachelor's degree in Mechanical Engineering.
Architect
Rajesh Kumar is seeking a position as a Manager Architect in a reputable organization. He has over 10 years of experience working as an architect and project coordinator for various construction companies. His responsibilities have included coordinating with consultants, preparing drawings and submissions, obtaining necessary approvals, handling PMC work, and overseeing site execution. He holds a B.A. degree and diplomas in Civil Engineering and Computer skills.
Resume
Krishnendu Majumder is seeking a position in project sales, design, estimation, or tendering with over 20 years of experience in designing DG set projects. He currently serves as Manager of Investor Business at Tractors India Private Limited, where he heads the design and estimation team. Some of his project experience includes estimating a 40MW project for Tata Steel worth over 100 crore rupees and a 2x2000kVA project for TCS in Kolkata worth 8 crore rupees. He has expertise in technical sales, design, estimation, attending meetings, and coordinating with suppliers like Caterpillar.
internship certi
This certificate verifies that Ashutosh Malvankar completed an internship as a Website Developer at Starszy Technologies Pvt. Ltd. in New Delhi, India from July 1st to August 2nd, 2016. During his internship, he successfully re branded the company's official website, completed the project on time, and showed strong design skills and a self-motivated attitude to learn. The CEO wishes him the best in future endeavors.
MEGHA M_STRUCTURAL ENG RESUME - 1
Megha Mooleemani is a civil and structural engineer with over 2 years of experience in technical and management roles. She currently works as an Assistant Engineer at Novel Engineering Consultants Pvt Ltd in Bangalore. She has experience in structural design and analysis, project planning, site supervision, and maintaining project reports. Her past experience includes roles at Consultants Consortium and Suvidha Innovation where she designed and analyzed various residential and commercial buildings using software like STAAD Pro. She holds a Master's degree in Structural Engineering and Bachelor's degree in Civil Engineering.
Vikash Kumar C.V
Vikash Kumar has over 11 years of experience as an MEP engineer. He has expertise in plumbing, firefighting installation, testing, commissioning, and maintenance for high-rise residential and commercial buildings. His work experience includes senior project engineer roles for Sukoi Engineers Pvt Ltd and Larsen & Toubro, where he managed MEP works, quality control, and coordinated vendors and teams. He holds a Diploma in Mechanical Engineering and training in AutoCAD and MS Office software.
Abhinav Mishra cv
This document is Abhinav Mishra's resume applying for the position of Civil Engineer (Billing/QS & Planning). The summary highlights:
- Abhinav Mishra currently works as an Assistant Engineer-Planning, QS & Billing at Era Landmarks Ltd. in Noida since July 2014. He has experience working on multiple high-rise residential projects with total costs ranging from Rs. 180-392 crores.
- His responsibilities include preparation of bills, BOQs, work orders, schedules, and reconciliations. He also monitors progress, coordinates with clients/contractors, and attends weekly meetings.
- Abhinav Mishra has a B.Tech in
Karthickeyan resume
C. Karthickeyan is a civil engineer seeking a challenging position. He has over 5 years of experience as a site engineer on various projects in India and Qatar. His responsibilities included construction planning, scheduling, quantity take-offs, formwork and concrete work inspection. He holds a Bachelor's degree in Civil Engineering from Annamalai University and is proficient in Tamil, English and construction software. He is currently looking for new opportunities and can be reached at his provided contact information.
UTPAL MONDAL CV ( updated)
Utpal Mondal has over 11 years of experience as a bending surveyor for pipeline construction projects. He has worked on numerous pipeline projects of varying diameters for major clients like IOCL, GAIL India Ltd., and ONGC. His responsibilities include executing bending surveys, route surveys, autoCAD drawings, and handling surveying instruments. He is currently working as a bending surveyor for Adorn Infra Energy's Haldia-Paradip Gas Pipeline Project. Utpal Mondal holds diplomas in surveying and drawing as well as a B.Com degree, and has skills in AutoCAD and Microsoft Office applications.
Cv ahmed mahmoud
Ahmed Mahmoud is a civil engineer from Maghagha, Egypt with over 5 years of experience working on construction projects in Saudi Arabia. He has worked as a site engineer and project engineer for Asmar Al-Khaleej Cont. Est. on various projects for King Fahd International Airport, Saudi Electricity Company, Saudi Oil Company (ARAMCO), and Saudi Aramco, where his responsibilities included managing civil engineering works like concrete work, excavation, and site activities. He holds a bachelor's degree in civil engineering from Minia University in Egypt.
Resume_Ankit
Ankit Singhvi has over 4 years of experience in cement projects. He is currently working as an Engineer (Mechanical Project) for Shree Cement Ltd. in Ras, Rajasthan, where his responsibilities include project planning, engineering and procurement. Previously he worked for 1.5 years as a Graduate Engineer Trainee at PetronEngineering Constructions Limited in Chittorgarh, where he helped with the installation and commissioning of a 3.3 million MT cement plant. He received a B.Tech. in Mechanical Engineering from GIT Jaipur with 61% marks.
lokesh
K. Lokesh Yadav is seeking a position as an engineer where he can utilize his planning, design, and project management skills. He has a Bachelor's degree in civil engineering and over 2 years of experience as a site engineer. His skills include AutoCAD, STAAD Pro, site engineering, quality control, and quantity estimation. He is currently a site engineer for Smile Inc. where he is responsible for maintaining the site, quality control, reporting, implementation of designs, estimating works, preparing bills, supervising labor, and monitoring progress.
What's hot (19)
Viewers also liked
Numerical Simulation of Hot Air Drying Kiln Velocity Field Based on Computati...
In this paper, the energy-efficient hot air drying kiln adopts innovative -designed guide air cover to control the speed of airflow velocity and the direction of the air flow in the fan outlet, so that the horizontal airflow in the fan outlet forms a smooth jets transferred to the vertical wind tunnel smoothly, and using computational fluid dynamics (CFD) software SCT/tetra to complete numerical simulation and analysis of air drying kiln flow velocity field , and compares in detail the before and after optimization design in different spatial positions of the velocity distribution in the cross section of drying kiln. The simulation results show that: After the adoption of new technology optimization, the drying kiln improves the uniformity of air flow field distribution, advances the drying efficiency and wood drying quality, also reduces the energy consumption, and lays the foundation of energy-efficient hot air drying kiln applications.
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...Synergis Engineering Design Solutions
We will go through how to analyze a design with Simulation CFD from beginning to end. We will start at the Inventor model and end at visualizing the results. In addition to seeing the actual workflow we will talk about how simulation tools can be used throughout the life of a design project, from early concept to final testing.Autodesk CFD for better building design by ZHU ge
Autodesk CFD for better building design by ZHU geThe Hong Kong Institute of Building Information Modelling (HKIBIM)
Seminar Presentation file for "Autodesk CFD for better building design" by Mr. ZHU ge.
Event Details
Seminar: Autodesk CFD for Better Building Design
Co-organized by: Autodesk / HKIBIM / IVE BIM Centre
With your BIM model, Autodesk® Simulation CFD software can provides computational fluid dynamics and thermal simulation analysis to help you create better interior and exterior design. A range of CFD modeling and thermal modeling tools are included for architectural and mechanical, electrical, and plumbing (MEP) applications. Model radiant heat transfer and occupant comfort; better predict contaminant dispersion and smoke migration in and around buildings. Study the long-term effects of diurnal heating. The Design Study Environment allows you to automate the creation of design studies, compare critical values, and predict design performance, optimize designs, and validate behavior before construction.
For more information about Autodesk® CFD: http://www.autodesk.com/products/cfd/overview
Seminar details:
Date & Time: 9-Sep-2015; 7:00pm – 8:30pm
Speaker: Ge Zhu, Technical Sales Specialist, Autodesk
He is major in Engineering Thermophysics, Master of Huazhong University of Science and Technology. He has 7 years for electrical thermal and datacenter CFD simulation experience.
Location: Lecture Theater LT-01, G/F, IVE (Morrison Hill), 6 Oi Kwan Road, Hong Kong
Agenda:
1. Why Simulation
2. Auotdesk CFD Features
3. Key Application Areas of Autodesk CFD
For any enquiry, please contact Mr. Waiky Leung at waiky.leung@autodesk.comHow CFD can help gain the most efficient data centre designs
Using the most powerful 3-D software available; computational fluid dynamics models the airflow within your data centre. It provides a graphic analysis of how hot and cool air flows, and Keysource use this tool as it is essential to gain the most efficient data centre designs.
analysis of heat exchanger by LMTD method
in this prsentation i derived heat exchanger by using LMTD mrthod with counter flow and parallel flow
Summary of lmtd and e ntu
Summary of lmtd and e ntu. The Log Mean Temperature Difference Method (LMTD) The Logarithmic Mean Temperature Difference(LMTD) is valid only for heat exchanger with one shell pass and one tube pass. For multiple number of shell and tube passes the flow pattern in a heat exchanger is neither purely co-current nor purely counter-current. The temperature difference between the hot and cold fluids varies along the heat exchanger. It is convenient to have a mean temperature difference Tm for use in the relation. s mQ UA T
3. The mean temperature difference in a heat transfer process depends on the direction of fluid flows involved in the process. The primary and secondary fluid in an heat exchanger process may flow in the same direction - parallel flow or cocurrent flow in the opposite direction - countercurrent flow or perpendicular to each other - cross flow
Heat transfer
Heat transfer is the transfer of thermal energy between objects of differing temperatures. There are three main modes of heat transfer: conduction, convection, and radiation. Conduction involves the transfer of heat through direct contact of objects. Convection involves the transfer of heat by the circulation of fluids like gases and liquids. Radiation involves the transfer of heat through electromagnetic waves between objects not in contact.
Shell and Tube Heat Exchangers, LMTD, Extended Surface Heat Exchangers.
This document discusses shell and tube heat exchangers, including their components, types, and how they work. It also covers LMTD correction factors for multiple pass exchangers, extended surface heat exchangers using fins, and definitions of fin efficiency and effectiveness. Specifically, it defines a shell and tube heat exchanger as consisting of tubes inside a shell to transfer heat between two fluids without mixing. It also describes common types like U-tube, straight single-pass, and straight double-pass designs.
How to Control Kiln Shell Corrosion Report
This document provides a summer training report on controlling kiln shell corrosion at Shree Cement Ltd. in Beawar, Rajasthan from May 7th to July 1st 2012. It includes an acknowledgment, index, abstract, introduction on cement production and the company, a literature review on corrosion and refractories, details on the refractory linings used at the plant, an analysis of kiln shell corrosion mechanisms, the role of refractories and process parameters, and recommendations. The goal is to understand kiln shell corrosion in hot running conditions and establish remedial measures to reduce corrosion.
Rotary Kiln Sizing & Design
Rotary kiln design is a complex process, with a variety of factors and material characteristics influencing the sizing and design. This presentation gives an overview of the sizing and design process, including the many factors that will need to be considered during the design stage.
Computational fluid dynamics for chemical reactor design
Computational fluid dynamics improve efficiencies in fluid flow, heat and mass transfer processes. Computational Fluid Dynamics is a branch of fluid mechanics that uses numerical methods and algorithms to solve and analyze problems that involve fluid flows. Computational fluid dynamics Found Its self in various industrial applications, Biomedical, Electronics, Defense, Industrial,Environmental, Civil and drug delivery systems
Distribusi Temperatur dan RH pada udara yang dikondisikan dan tidak dikondisikan
Distribusi Temperatur dan RH pada udara yang dikondisikan dan tidak dikondisikanSelvi Mustika Apriani
Presentasi DTU 2015dasar tata udaa cooling load 3
Dokumen tersebut membahas tentang perhitungan beban pendinginan ruangan yang mencakup definisi, tujuan, metode perhitungan, jenis beban, data yang dibutuhkan, serta contoh perhitungan beban pendinginan untuk atap, dinding, kaca, dan partisi."
Modul Penyelesaian Soal Alat Penukar Kalor
Buku ini memberikan contoh soal penyelesaian alat penukar kalor (heat exchanger) untuk pipa ganda dan shell dan tube, meliputi teori dasar tentang koefisien perpindahan kalor, perbedaan temperatur rata-rata logaritma, dan metode efektivitas-NTU."
DESIGN OF AIR PRE HEATER AND ECONOMIZER
ABSTRACT
Heat/light/electrical energy is out today’s necessity and has scarcity also. Energy conservation is key requirement of any industry at all times.
In general, industries use heat energy for conservation of raw material to finished product. The source of heat energy is generally saturated or super heated steam. The steam generation is common use one boiler with carity of fuels. Whatever may be the fuel the generation should be as economy as possible which adds to the product cost. Further the usage of steam and recycling steam condensate back to boiler is an art depending on plant layouts.
In this project the steam generator is water tube boiler fired with rice husk. The steam is transferred to the tyre/tube moulds where tyres/tubes are cured while the heat is rejected to the tyres the condensate forms and this condensate is put back to the boiler. While doing so the steam is also stopped back to boiler without rejecting complete heat to the product. This gets flashed into atmosphere at feed water tank. The science of separation of condensate from steam saves energy. Better the separation more the fuel conservation.
In the steam generator the fuel is burnt to heat the water and form steam. This fuel burnt flue gas carries lot of energy, out through chimney. Prior to exhausting through the heat left in flue need to be recovered, through heat recovery mechanisms’. In this project an air-preheater condensate heat recovery unit is the major energy consuming station.
Heat Exchangers
Heat exchangers transfer heat from one fluid to another. There are two main types: tube-and-shell and plate. Tube-and-shell consists of tubes in a shell where fluids flow inside and outside the tubes. Plate heat exchangers use plates to separate fluids which flow between plates in alternating channels. Heat exchangers can operate in parallel, counter, or cross flow configurations. Performance tests determine the overall heat transfer coefficient and identify any fouling issues.
Computational Fluid Dynamics (CFD)
This document discusses computational fluid dynamics (CFD). CFD uses numerical analysis and algorithms to solve and analyze fluid flow problems. It can be used at various stages of engineering to study designs, develop products, optimize designs, troubleshoot issues, and aid redesign. CFD complements experimental testing by reducing costs and effort required for data acquisition. It involves discretizing the fluid domain, applying boundary conditions, solving equations for conservation of properties, and interpolating results. Turbulence models and discretization methods like finite volume are discussed. The CFD process involves pre-processing the problem, solving it, and post-processing the results.
Computational Fluid Dynamics (CFD)
Computational fluid dynamics (CFD) is a numerical method used to analyze and solve fluid flow problems. CFD uses the mathematical equations that govern fluid motion and heat transfer to simulate the behavior of fluids. It provides a comprehensive examination of systems through modeling of velocity, pressure, temperature, and other properties without extensive physical testing. CFD has advantages of being relatively low cost, fast, and able to simulate real conditions. Limitations include accuracy depending on physical models and numerical errors from discretization. CFD is commonly used in engineering applications like aerodynamics, automotive, and electronics design.
Viewers also liked (19)
Numerical Simulation of Hot Air Drying Kiln Velocity Field Based on Computati...
Numerical Simulation of Hot Air Drying Kiln Velocity Field Based on Computati...
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...
How to Use Sim CFD (to your advantage): A Primer for Computational Fluid Dyna...
How CFD can help gain the most efficient data centre designs
How CFD can help gain the most efficient data centre designs
Shell and Tube Heat Exchangers, LMTD, Extended Surface Heat Exchangers.
Shell and Tube Heat Exchangers, LMTD, Extended Surface Heat Exchangers.
Computational fluid dynamics for chemical reactor design
Computational fluid dynamics for chemical reactor design
Distribusi Temperatur dan RH pada udara yang dikondisikan dan tidak dikondisikan
Distribusi Temperatur dan RH pada udara yang dikondisikan dan tidak dikondisikan
Similar to Colleagues Brochure
Sudhakar Vordhi 27012016
Vordhi V L Sudhakar has over 20 years of experience in civil engineering and project management, including 15 years in building construction and 7 years managing telecom projects. He has extensive experience managing all aspects of construction projects from initial planning and design through completion, ensuring they are delivered on time, on budget, and meeting quality standards. His resume provides details of his work history, roles and responsibilities, and qualifications.
Design portfolio sarvesh satam
This document is Sarvesh Satam's design portfolio, which provides information about his education, skills, experience, and projects. It summarizes his Masters in Mechanical Engineering and Bachelors in Mechanical Engineering. It also lists his technical skills in engineering software, programming languages, and computer skills. His professional experience includes mechanical engineering roles at Knorr-Bremse and Godrej & Boyce, where he worked on product design, development, testing, and analysis. His portfolio highlights several educational projects focused on mechanical design, optimization, and additive manufacturing.
My updated cv
Adarsh Kumar Jain is a 61-year-old Indian professional with over 43 years of experience in project management, planning, execution, and management of turnkey construction projects in India, Saudi Arabia, Nepal, Yemen, and Bangladesh. He holds a DME degree from 1972 and a PMP certification from 2006. He is currently seeking new project management assignments and is open to negotiations regarding compensation.
Aswath-Kumar Resume
This document contains the resume of Aswathnarrayana Kumar, an industrial engineer from Bangalore, India. It summarizes his educational qualifications including a Master's degree in Manufacturing Engineering from Coventry University, UK and a Bachelor's degree in Mechanical Engineering from Visvesvaraya Technological University, India. It also outlines his professional experience, skills, languages, and activities.
211113 sushil-uupdated-resume
Sushilkumar M. Jogdankar is a senior team leader with over 15 years of experience in fields including automotive, HVAC, cement, and power plants. He has strong technical and communication skills and is proficient in various CFD and simulation software tools. Currently he works as a strategic account senior CFD project leader supporting a US client on projects involving pressure drop and heat transfer coefficient calculations. He has worked on engine combustion simulations and other CFD projects for companies including MAN Trucks, Caterpillar, and Onward Technologies.
ICF Brochure
The document summarizes an engineering project completed by the author from June to August 2012 at Integral Coach Factory in Chennai, India. During the project, the author employed skills in design software, engineering drawing, mechanics, machine design, materials science, and other fields to design a jig and fixture. The total estimated cost to manufacture the machine was calculated to be between 406,259 and 486,259 Indian rupees. A profit calculation determined using this machine would earn estimated yearly savings/profits of 73,031.86 rupees.
Shanmukharao K_resume
This document contains an executive profile summary for Shanmukhara Konapala, an Assistant Manager of Constructions currently working for TATA Projects Ltd in India. The summary includes his personal details, educational qualifications, over 15 years of experience in civil engineering and construction projects, roles and responsibilities in previous companies, and skills.
MAKARAND GOVIND DHAWANE
Makarand Govind Dhawane is a senior project management professional with 17 years of experience managing civil construction projects. He has expertise in project management, construction management, contracts administration, and ensuring projects are completed on time and on budget. He is currently working as a manager at Engineers India Ltd, overseeing the design of various units for a large oil refinery project in Nigeria.
Resume 25_01_17
Vinay Madhukarbhai Bhatt is a mechanical engineer with over 26 years of experience in project management, site management, installation, commissioning, quality assurance, and people management. He has successfully managed numerous projects in industries like pharmaceuticals, automotive, food and beverages. Currently he is the DGM of Erection and Commissioning at United Phosphoros Engineers Environment Ltd, working on the construction of a Common Effluent Treatment Plant in Baddi, Himachal Pradesh.
Marina_basta
Fady Nabil Saad Basta worked as a paid Mechanical Design Engineer intern at Marina Platforms Co. in Alexandria, Egypt from June 2007 to September 2008. [1] Marina Platforms Co. is a leading company in Egypt and the Middle East that designs and manufactures lifting equipment. [2] As an intern, Fady's tasks included creating lightweight mechanical designs using AutoCAD, performing structural and weight analyses, assisting engineers with projects, and helping ensure safety standards were met. [3] This certificate confirms Fady's internship at Marina Platforms Co.
Srivatsa Bhargava CV
This individual has over 5 years of experience in project management, construction engineering, and renewable energy consulting. They have a Master's in Construction Project Management from Heriot-Watt University in Dubai and a Bachelor's in Civil Engineering. Their experience ranges from managing residential and commercial construction projects in India to conducting feasibility studies and creating 3D models for solar energy projects in Dubai. They also have skills in BIM, CAD, scheduling software, and have received professional certifications in project management and building energy analysis.
JYOTI THAKURIA CV
Jyotiprasad Thakuria is a civil engineer with over 8 years of experience in project management and procurement roles in the construction industry in Assam, India. He has worked on infrastructure projects for the Public Works Department, the National Highways Authority of India, and as a consultant. His experience includes designing highways, bridges, and other infrastructure projects and overseeing their construction and quality control. He is currently the project in-charge for the upgradation of two national highways totaling 183.6 km for the PWD in Assam.
Rajesh singh Resume-2015
Rajesh Kumar Singh has over 20 years of experience in project management and civil engineering. He is currently working as an AGM of Project Operations at Khanna Properties managing the construction of a large medical college and hospital in Jabalpur. Prior to this, he held positions as Senior Project Manager and Project Manager for several real estate development companies, overseeing the construction of multiple malls and commercial buildings across India. He has a Bachelor's degree in Civil Engineering and specialized training in construction quality monitoring and earthquake-resistant design.
resume rkm
Rakesh Kumar Mishra has over 16 years of experience in project management, construction operations, site administration, and electrical engineering. He is currently the Deputy General Manager and Head of Procurement and Technical Solutions at Raheja Developers Ltd in Delhi, where he oversees project execution, procurement, and technical coordination. Previously he has held managerial roles overseeing electrical, procurement, and project management functions at other construction and development companies. He has extensive experience executing projects in various sectors including IT parks, hotels, hospitals, and residential buildings.
SOCIAL PROFILE
This document provides a summary of Sayed Peer Hirekeri's experience and qualifications as a civil project management professional. He has over 17 years of experience in civil construction, project management, cost estimation, and construction planning. Currently, he works as a project manager overseeing the construction of residential and commercial projects to ensure they are completed on time and within budget. He has managed a variety of projects including buildings, factories, and infrastructure developments.
Venkat - QS
Venkatraman Srinivasan is a Quantity Surveyor with over 10 years of experience in projects in Qatar and India totaling over 300 million Qatari Riyals. He currently works as an Assistant Quantity Surveyor for Gulf Contracting in Doha, Qatar where he is responsible for cost estimation, valuation, contract administration, and commercial management for projects ranging from 5-100 million Qatari Riyals. Previously he worked as a Billing Engineer for Rabbit Builders in India where he gained experience in quantity take-off, costing, procurement, and project monitoring for buildings and infrastructure. He holds a BE in Civil Engineering and is pursuing a PG Diploma in Quantity Surveying and Val
skp.cv .
Sudhansu Kumar Patro is a mechanical design engineer with over 4 years of experience. He has worked at companies such as Piano Presitel in Mumbai and Silverline Metal Engineering Private Ltd. in Mumbai, where he was responsible for mechanical design, documentation, and ensuring quality standards. Patro has a B.Tech in Mechanical Engineering from GIET Gunupur with a CGPA of 6.99. He has knowledge of CAD tools such as AutoCAD, CATIA, and Creo. Patro is seeking a new role with an expected CTC of 3.4 LPA and can start within a 15 day notice period.
Resume - Ajit Nair
Ajit Nair has a Masters in Civil Engineering from North Carolina State University and a Bachelors from Sir M. Visvesvaraya Institute of Technology in India. He has over 3 years of experience in cost estimation and project management working for contractors in the US, Oman, and India. His technical skills include cost estimation software like HardDollar and Bluebeam, as well as CAD programs. He maintains high academic achievement and participates in volunteer and extracurricular activities.
BhavyaRaj CV
This document contains a resume and profile for Raghavan Nair Bhavyaraj, a Project Engineer seeking a position where he can utilize his mechanical fabrication and installation experience. It outlines his educational background, including a diploma in mechanical engineering, as well as his work history overseeing mechanical projects in India and the UAE for over 8 years. His technical skills include AutoCAD, PRO-E, piping and structural design, and he is currently employed as a Mechanical Site In-Charge in Dubai.
Gopinath._P_Latest_by_MAR_2015
This document provides a summary of Gopinath P's experience as a Senior Piping Designer. He has over 11 years of experience in piping and layout design for oil and gas projects. Currently, he works as a Senior Designer at VALDEL EC in Bangalore, India on the PETRONAS RAPID PROJECT in Malaysia. He is responsible for tasks like feed plot verification, equipment location, design review, cost optimization, nozzle orientation drawings, and model reviews. He is proficient in software like SP3D, PDS, PDMS, NavisWorks, and Microstation. Previously he has worked on projects in the UAE, Russia, Syria, and India for companies like Petrofac, IDE
Similar to Colleagues Brochure (20)
Colleagues Brochure
- 1. By ARNOV SETT [arnovsett@gmail.com] Ø I did this project from 13th February 2014 to 20th May 2014 in Colleagues Consultants Pvt. Ltd., Gurgaon (India). Ø During this project I exercised my Project Management Skills, concepts from Fluid Mechanics, Heat transfer, Strength of Materials, Computational Fluid Dynamics and employed my software skill of CATIA, ANSYS and Microsoft Project 2013. Ø The results of this research work were utilized to generate solutions, which would determine the design configurations of the Rotary Kiln and the positions of the cooling fans for the Kiln that has been installed in Cosmos Cement Plant, Nepal in July 2013. Ø The cost of the research work was calculated using PM tool, which amounted to Rs.202,500.