CM-HT12-F Lit Wind Cones/Wind Direction Indicators/Internally Externally Lighted Windsocks, FAA L-806 L-807, provide a highly-visible means of visual guidance. HUNAN CHENDONG TECH CO., LTD Tel: +0086-0731-85563265 Fax: +0086-0731-85563365 Skype: sophia.guo88 Phone/WhatsApp: +0086-13929493960 Email: sophia@chendongtech.com Website: http://www.cdt-en.com/

1. CHENDONG TECHNOLOGY CO.,LTD.
Application
Key Feature
CM-HT12/F Wind Cone can be used as a sign in all kinds of airport to observe the
wind power and wind direction in both daytime and night.
On the top installed one red LED obstruction light, provide the obstacle hint for the pilot at
night.
On the upper of the pole installed a light stainless wind sleeve frame and one 360°rotation
gear.
Inside of the windsock frame installed one waterproof LED spotlight, it will turn
with the windsock, could light the windsock directly, not like the old outside flood light,
then eliminate the power consumption and against the eye flare.
On the windsock frame installed one wind sleeve which is made of corrosion-resident
and high-temperature-resident nylon anti-UV material, and lifetime is long. The color is
red(orange) and white, have 5 sections, the start color is red(orange). The windsock
including 3 dimensions according to the pole's height.
1.The diameter is 300mm, the diameter at small end is 150mm and the length is 1.2m
2.The diameter is 600mm, the diameter at small end is 300mm and the length is 2.4m
3.The diameter is 900mm, the diameter at small end is 450mm and the length is 3.6m
How to choose the fabric windsock?
Usually, for the wind cone height below 4m, the windsock would be 1.2m in length; for
the wind cone height is 4m-6m, the windsock would be 2.4m in length; for the wind cone
height above 6m, the windsock would be 3.6m in length;
On the bottom of the pole, it has a control box, you could choose the wind cone with the
photoswitch; the power supply cable into the control box directly.
The pole and the base all use the SUS304 stainless. The windsock height could be
2m,3m,4m,5m,6m or as buyer's requirements; when the total height more than 6m, you could
add the stay wire in order to increase the stability; when the windsock height more than 4m,
you could choose the hinges base so that could install more steady.
CM-HT12/F Heliport Wind Cone
CM-HT12/F HELIPORT LIGHTING
CM-HT12/F heliport Wind Cone is to indicate the wind direction of
the final approach and take-off, it can make a general indication to the
wind speed. According to the ICAO provisions for each airport must be
set at least one wind cone. Its installation location must not
interference by nearby objects or the airflow blowed by the rotor,
and must be guaranteed the helicopter can be clearly identified at least
in 200 meters away.
CM-HT12/F Structure chart
Model
Height
Customized
Operating voltage
Power consumption
Peak light intensity
CM-HT12/F
2m/3m/4m/5m/6m/7m
Yes,folded type/solar type as client required
AC220V (Other available)
≤20W
≥32.5cd
Item Parameter
Design specifications
of U.S. Federal Aviation Administration (FAA), Appendix 14-Airport of International Civil
Aviation Organization (ICAO) and the specifications in Part Four of Airport Design drafted
by ICAO.
The max designed wind speed is 260kph. But if the area wind speed or Ultraviolet
strength is too high, it will shorten the wind sleeve's lifespan.Connect the wire in the bottom
and 2.5mm wire terminal is available.
This product complies with the Consultation Announcement AC150/5345-27C and L-806
Application
Key Feature
heliport lights' on/off controller. It controls and shows all the heliport
navigation lights' work status. This product is outdoor type, and ingress
protection is IP65, can be used in the outdoor directly.
CM-HT12/G is a heliport outdoor light controller, suits all kinds of
CM-HT12/G Heliport Light Controller
●
●
● T
The house is made of steel painted by spraying plastic finish which is corrosion
resistance and anti-UV.
It has 6 circuits of output, and it can be changed according to requirement. There
are Auto, Manual and Remote three
modes for user's choice.
his controller is powerful, reliable, safe, easy to use and maintain, convenient.
CM-HT12/G HELIPORT LIGHTING
Item
CM-HT12/G
AC220V
≤4KW
IP65
0～95%
≤2500m
-40℃～55℃
40kg
800mm×600mm×260mm
858*520*4-M12
≤30W
(Other available)
Parameter
Model
Operating voltage
Power consumption
Load capacity
Ingress Protection
Environment humidity
Altitude
Operating temperature
Weight
Overall Dimension (mm)
Installation Dimension (mm) CM-HT12/G Structure chart
48
47 /