CM-HT12-CU Helipad lighting system 110-240 Vac steady omnidirectional green light TLOF FATO helipad elevated perimeter lighting A signalization TLOF system (Touchdown and Lift-Off area) must be present in every heliport with nigh operation. The system is composed by lights with green omnidirectional emission, located on the perimeter of heliport. TLOF area can be circular (with a minimum of 14 lights) or square (with minimum of 4 lights for side and installed with a maximum distance of 3 meters one from the other). HUNAN CHENDONG TECH CO., LTD Tel: +0086-0731-85563265 Fax: +0086-0731-85563365 Phone/WhatsApp: +0086-13929493960 Skype: sophia.guo88 Email: sophia@chendongtech.com Website: http://www.cdt-en.com/

1. CHENDONG TECHNOLOGY CO.,LTD.
CM-HT12/A HELIPORT LIGHTING
Application
Key Feature
CM-HT12/A Heliport Beacon Light
●
●
●
●
The lamp cover adopts PC material with excellent impact resistance (IZOD notch impact strength:
90), thermal stability (service temperature can be 130℃), great transparency (available with a light
transmission of up to 90%), auto-UV resistance, aging resistance and flammability rating in
UL94V0.
The house of the light adopts aluminum alloy and stainless steel SUS304, on the surface use the
oxidation treatment, the product features are light weight, water tightness, seismic and corrosion
resistance.
Light source adopts imported LED, featuring high light (100Lm/W), light source life for flashing
reaching 100,000,000 times. Widely used in the domestic and international aviation field.
The light with surge protection device (In 7.5KA/5 times, Imax 15KA) can be used in the harsh
environment.
CM-HT12/A Heliport beacon light is a white flashing light, as a distance
visual guidance. It's so important especially when the ambient light makes it
difficult to see there is a heliport. According to ICAO, every heliport should
have at least one light beacon. It should be installed above or near the
heliport, it will be better if it is installed in an elevated place. Please make
sure it will not let the pilot feel glaring in short distance.
Item
CM-HT12/A
AC220V/AC110V
≤15W
4 times/2 seconds
2500cd
LED
100,000hours
White
IP65
≤2500m
-40℃~55℃
240Km/h
2.1kg
210mm×210mm×140mm
126mm×126mm×M10
(Other available)
Parameter
CM-HT12/A Structure chart
Model
Operating voltage
Power consumption
Flash Frequency
Light Intensity
Light Source
Light Source Lifespan
Emitting Color
Ingress Protection
Altitude
Operating temperature
Wind Load
Weight
Overall Dimension (mm)
Installation Dimension (mm)
CM-HT12/CU Heliport Perimeter Light
●
●
●
●
The lamp cover adopts PC material with excellent impact resistance (IZOD notch
impact strength: 90), thermal stability (service temperature can be 130℃), great
transparency (available with a light transmission of up to 90%), auto-UV resistance, aging
resistance and flammability rating in UL94V0.
Light source adopts the high brightness LED with low power consumption,high
efficiency and its lifespan reaches to 100,000 hrs.
The house of light adopts aluminum alloy, the product features are light weight, water
tightness, seismic and corrosion resistance.
The light with surge protection device (In 7.5KA/5 times, Imax 15KA) can be used in the
harsh environment.
upright installing light. Emitting omnidirectional green light at night or
in the daytime with low visibility to indicate the perimeter of heliport
take off and land area, to indicate the safe landing area for the
helicopter pilot. It is controlled by a switch in the heliport control
CM-HT12/CU heliport perimeter light is a constant green/yellow
CM-HT12/CU HELIPORT LIGHTING
CM-HT12/CU
AC220V (Other available)
≤5W
30cd
LED
100,000 Hours
Green/White/Blue/Yellow
IP65
≤2500m
-40℃～55℃
240Km/h
2.1kg
180mm×180mm×248mm
Ø130mm×4-M10
Parameter
Model
Operating voltage
Power consumption
Light Intensity
Light Source
Light Source Lifespan
Emitting Color
Ingress Protection
Altitude
Operating temperature
Wind Load
Weight
Overall Dimension (mm)
Installation Dimension (mm)
Application
Key Feature
Item
CM-HT12/CU Structure Chart
126
1
26
4-Ø11
140
Ø210
248
130
130
4-Ø10.5