Cm8825 fn coating thickness gauge
•
0 likes•94 views
The document describes the Mextech CM8825FN coating thickness gauge, which uses magnetic induction to measure coating thickness on industrial equipment from 0-1250um with an accuracy of ±1-3% or ±2.5um. The gauge has a minimum measuring area of 6mm, operates from 0-45°C, and can convert between metric and imperial units when powered by 4 AAA batteries.
Report
Share
Report
Share
Download to read offline
Recommended
Cm8821 coating thickness gauge
The CM8821 coating thickness gauge from Mextech Instruments measures the thickness and corrosion of materials like pressure vessels, chemical equipment, and oil storage tanks in various industries. It uses magnetic induction to measure within a range of 0 to 1000um with a resolution of 0.1/1 and accuracy of ±1-3% or ±2.5um, requiring only a 6mm minimum measuring area and 0.3mm minimum sample thickness.
Htc digital multimeter dm 88
This document summarizes the features and specifications of the DM-88 digital multimeter. It can measure DC and AC voltage and current, resistance, capacitance, frequency, temperature, and has special functions like logic testing, diode and transistor testing, continuity testing, and auto power off. Measurements are displayed on a large LCD screen. It operates on 2 AAA batteries and has basic accuracy of 0.5% + digits for DC voltage and 1% + digits for DC current.
Cut resistance tester
Cut resistance tester is to determine the cut resistance of protective equipment such as gloves, footwear and other products. By providing certain loading pressure and reciprocating movement, cut resistance tester can simulate the real using conditions and predict the operational performance of the specimen.
https://www.satatonmall.com/p/cut-resistance-tester.html
Electronic twist tester
The electric yarn twist tester can be used to determine yarn twist in single yarn or ply yarns, it is a kind of quadrant type tester with auto stop & reverse for conventional or untwist/re-twist methods. Test length adjustable up to 50cm/20 inches for S & Z twist yarns.
Tecnotion um series_specsheet
This document provides specifications for four ironless synchronous motor models (UM3, UM6, UM9, UM12) including performance characteristics, electrical properties, thermal properties, mechanical dimensions, and approvals. The motors have peak forces ranging from 100-400N and maximum speeds of 10-18m/s when operated at voltages up to 300Vdc. Electrical data includes current, resistance, and inductance values. Thermal properties incorporate power loss, temperature rise, and cut-off values. Physical dimensions and weights are listed for the coil units and magnet yokes.
Htc electro magnetic field tester emf 522
The EMF-522 is an electromagnetic field tester with a 3.5 digit LCD display and 1999 count maximum. It measures electromagnetic fields from 30Hz to 300Hz with resolutions of 0.1/1mG or 0.01/0.1μT across ranges of 200/2000mG or 20/200μT. The EMF-522 has a single-axis sensor, ±(2.5%+6dgt) accuracy at 50/60Hz, and operates for approximately 100 hours on a 9V battery with dimensions of 130 x 56 x 38mm.
Custom roll forming machine
This document summarizes the specifications of a custom roll forming machine. The machine can form materials from 1.0mm to 1.6mm thick into profiles up to 80mm wide at speeds of 3-5m/min. The main components include an uncoiler and straightener, servo feeder, hydraulic punching system, guide device, 10-station roll forming machine, hydraulic shear, and a flat collection rack. The electrical control system uses a PLC and touch screen interface to automatically control the process and monitor equipment status.
Abtech Medium Voltage Terminal (ATEX Certified) - Spec Sheet
The document provides specifications for Abtech's medium voltage terminal blocks, including:
- They are available in 3, 4, and 6 way configurations for connecting 4.4-6.6kV electrical supplies to any ATEX or IECEx Zone 1 certified enclosure.
- Models can withstand operating temperatures from -40°C to +130°C and are made of plastic and laminate materials.
- They have certification for use in Zone 1 & 21 hazardous areas and types of protection including increased safety.
- Options include linking terminals in pairs or multiples.
Recommended
Cm8821 coating thickness gauge
The CM8821 coating thickness gauge from Mextech Instruments measures the thickness and corrosion of materials like pressure vessels, chemical equipment, and oil storage tanks in various industries. It uses magnetic induction to measure within a range of 0 to 1000um with a resolution of 0.1/1 and accuracy of ±1-3% or ±2.5um, requiring only a 6mm minimum measuring area and 0.3mm minimum sample thickness.
Htc digital multimeter dm 88
This document summarizes the features and specifications of the DM-88 digital multimeter. It can measure DC and AC voltage and current, resistance, capacitance, frequency, temperature, and has special functions like logic testing, diode and transistor testing, continuity testing, and auto power off. Measurements are displayed on a large LCD screen. It operates on 2 AAA batteries and has basic accuracy of 0.5% + digits for DC voltage and 1% + digits for DC current.
Cut resistance tester
Cut resistance tester is to determine the cut resistance of protective equipment such as gloves, footwear and other products. By providing certain loading pressure and reciprocating movement, cut resistance tester can simulate the real using conditions and predict the operational performance of the specimen.
https://www.satatonmall.com/p/cut-resistance-tester.html
Electronic twist tester
The electric yarn twist tester can be used to determine yarn twist in single yarn or ply yarns, it is a kind of quadrant type tester with auto stop & reverse for conventional or untwist/re-twist methods. Test length adjustable up to 50cm/20 inches for S & Z twist yarns.
Tecnotion um series_specsheet
This document provides specifications for four ironless synchronous motor models (UM3, UM6, UM9, UM12) including performance characteristics, electrical properties, thermal properties, mechanical dimensions, and approvals. The motors have peak forces ranging from 100-400N and maximum speeds of 10-18m/s when operated at voltages up to 300Vdc. Electrical data includes current, resistance, and inductance values. Thermal properties incorporate power loss, temperature rise, and cut-off values. Physical dimensions and weights are listed for the coil units and magnet yokes.
Htc electro magnetic field tester emf 522
The EMF-522 is an electromagnetic field tester with a 3.5 digit LCD display and 1999 count maximum. It measures electromagnetic fields from 30Hz to 300Hz with resolutions of 0.1/1mG or 0.01/0.1μT across ranges of 200/2000mG or 20/200μT. The EMF-522 has a single-axis sensor, ±(2.5%+6dgt) accuracy at 50/60Hz, and operates for approximately 100 hours on a 9V battery with dimensions of 130 x 56 x 38mm.
Custom roll forming machine
This document summarizes the specifications of a custom roll forming machine. The machine can form materials from 1.0mm to 1.6mm thick into profiles up to 80mm wide at speeds of 3-5m/min. The main components include an uncoiler and straightener, servo feeder, hydraulic punching system, guide device, 10-station roll forming machine, hydraulic shear, and a flat collection rack. The electrical control system uses a PLC and touch screen interface to automatically control the process and monitor equipment status.
Abtech Medium Voltage Terminal (ATEX Certified) - Spec Sheet
The document provides specifications for Abtech's medium voltage terminal blocks, including:
- They are available in 3, 4, and 6 way configurations for connecting 4.4-6.6kV electrical supplies to any ATEX or IECEx Zone 1 certified enclosure.
- Models can withstand operating temperatures from -40°C to +130°C and are made of plastic and laminate materials.
- They have certification for use in Zone 1 & 21 hazardous areas and types of protection including increased safety.
- Options include linking terminals in pairs or multiples.
Npm pfc35th specsheet
This document provides specifications for the NPM PFC35TH-48 tin-can stepper motor from Nippon Pulse. It has 48 steps per revolution, operates from 9 volts, and has a holding torque of 33 mN-m. The motor has a operating temperature range of -10 to 50 degrees Celsius and can withstand temperatures up to 100 degrees Celsius.
741c amp op
The NTE941M and NTE941SM are general purpose operational amplifiers that offer protection from overloads and oscillations. They have a supply voltage rating of ±18V, can withstand differential input voltages up to ±30V, and provide continuous short-circuit protection on the output. Both models come in 8-pin packages and have typical operating characteristics such as input offset voltage below 7.5mV and voltage gain above 20V/mV.
Machines deatails1
This document provides specifications for several pieces of electronic assembly equipment, including:
- A WSM 180 wave soldering machine with a 7" wave width and conveyor speed of up to 6 ft/min for automatic soldering.
- An RF300 reflow soldering oven with 3 heating zones, 850mm heated length, and maximum temperature of 300C for SMT component assembly.
- A YV100X pick and place machine with accuracy of ±0.1mm for chip components, maximum mounting speed of 1.7sec/QFP, and capacity for 8-56mm tapes and trays.
- An S1200 semi-automatic printer with a printing speed up
Eta uv oven introduction
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue,uv
photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant
surface cured and dried.
ETA UV Oven Introduction
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue, uv photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant surface cured and dried.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
Tecnotion ul series_specsheet
This document provides specifications for various magnet yoke and coil unit configurations for an ironless synchronous motor. It includes dimensions, weights, electrical parameters like current and resistance, thermal properties, and mechanical details. Performance metrics like force, speed, and power loss are given for different motor sizes from UL3 to UL15 under various operating conditions. Approvals information and references to additional resources are also included.
Tecnotion uxx series_specsheet
This document provides specifications for various UXX series ironless motors from Tecnotion BV. It includes performance parameters such as peak and continuous force, speed, and motor constants. It also lists electrical characteristics like current, voltage, resistance and inductance. Additional details cover thermal properties, mechanical dimensions, cable types, and approvals. The document is intended to aid selection of appropriate ironless motors for applications.
Htc laser distance meter dm 86
This document summarizes the features and specifications of the DM-86 31⁄2 digital multimeter. It measures DC and AC voltage, DC and AC current, resistance, temperature, has features like diode and transistor testing, continuity testing, low battery indication, and auto power off. It has basic accuracy ranges from ±(0.5% + 4) to ±(1.5% + 5) depending on the measurement function. Additional features include non-contact voltage detection, 10MΩ input impedance, 3 samples/second, 40-400Hz AC frequency response, and it runs on a 9V battery with approximately 30 minutes of auto power off time. Standard accessories include test leads, holster, temperature probe
Beam roll forming machine
Superda beam roll forming machine for logistic sy beam box, construction usinb beam, steel beam production, super design roll forming machine.
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Portable x ray
Ultrasound Scanner Manufacturers ,palm ultrasoundscanner,color ultrasound scanner,doppler ultrasound,dopplercolor ultrasound,China Ultrasound Scanner
Manufacturers, Ultrasound Scanner Suppliers,China Ultrasound Scanner
Htc ac clamp meter 1000amp cm 2030
This document provides specifications for the CM-2030 AC Clamp Meter that can measure up to 1000 amps. It lists the meter's key features such as being fully protected and having a 52mm jaw opening. The technical data section specifies the meter's measurement ranges, resolutions and accuracies for functions like DC voltage, AC voltage, AC current, resistance, diode testing and continuity testing. It concludes with standard accessories, dimensions and contact information for the manufacturer.
Lcr meter-6630 e
The test frequency of the 6630E economic LCR meter is AC 10Hz-10MHz. and is suitable for the LCR testes of AC signals.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
project(theerapong)
This document discusses using acoustic emission testing to check for stress corrosion in pressure vessels and materials. It explains that stress waves can be instant or continuous and are caused by stress on pressure vessels. Different types of stainless steel have varying susceptibility to stress corrosion due to cracking of the passive film on the material's surface. The document also details how to collect acoustic emission signal data from sensors and calculate the location of stress corrosion wave origins using the time delay between two sensors and the wave propagation speed.
Cm8821 coating thickness gauge
The CM8821 coating thickness gauge from Mextech Instruments measures the thickness and corrosion of materials like pressure vessels, chemical equipment, and oil storage tanks in various industries. It uses magnetic induction to measure within a range of 0 to 1000um with a resolution of 0.1/1 and accuracy of ±1-3% or ±2.5um, requiring only a 6mm minimum measuring area and 0.3mm minimum sample thickness.
Semiotics Of Phallic Symbolism
The document discusses various phallic symbols and their use in media and advertisements. Some examples of phallic symbols mentioned include penises, guns, missiles, rockets, trains rushing into tunnels, buildings, axes, fountains, shower heads, towers, microphones, snakes, and the letter A in the AXE logo. Phallic symbols are used to represent masculinity, power, fertility and male domination. They are frequently employed in advertising to subliminally convey these meanings.
M health 1
1. M-health requires body sensor networks with devices that can measure vital signs like temperature, blood pressure, heart rate, respiratory rate, and blood sugar, as well as a connection system.
2. It also requires medical apps and health apps running on mobile devices to analyze and transmit the sensor data.
3. Common m-health sensor devices include pulse oximeters, EKG monitors, accelerometers, and sensors that can detect respiration rate, body temperature, and other vital signs. The data is transmitted wirelessly to mobile apps for further analysis and monitoring.
Stress corrosion cracking
The document discusses stress corrosion cracking (SCC), which is the failure of metal due to the combined effect of stress and chemical attack. SCC requires a susceptible metal, a specific corrosive environment, and an applied tensile stress. An example is given of the 1974 Flixborough explosion in the UK caused by SCC in mild steel exposed to hot nitrate solution under stress. SCC can initiate and propagate cracks without visible corrosion and cause sudden catastrophic failure. It commonly occurs at flaws, grain boundaries, or corrosion pits. The mechanisms of SCC include both anodic dissolution due to pre-existing flaws or grain boundary precipitates, as well as rupture of protective films by plastic strain. Prevention methods include choosing non-sus
NHS Change Model hack day full report
Here is the full report of the NHS Change Model hack event, which took place on Wednesday, 14 October 2015.
There has never been a better time to really scrutinise the way we go about change in health and care. There is a growing body of evidence and practical know-how behind effective and successful change and we must make sure that our change efforts are designed to take full account of the evidence based and lessons learned.
The NHS Change Model has been one of the leading models of change used in the NHS over the past couple of years. We know that some improvement leaders would not be without it and use the model extensively, to underpin and structure all their change activities. We also recognise that there are some change leaders that are not so keen on the NHS Change Model. They have found it hard to apply the model in a practical and useful way and there are others who think that it should be broadened out from just being an NHS-specific model.
The way we lead change must always adapt and evolve with the times and as such, we feel it is timely and opportune to review and revise the NHS Change Model. Our starting point is hearing and understanding exactly what the people leading change in health and care say they need to support them. We want to use methods that fly in the face of tradition and open up new, exciting and creative opportunities.
We organised a hack day for about 80 selected people that brought diverse and wide-ranging perspectives to the table. Hack events have traditionally been associated with technology and programming to solve problems, but we are adapting the concept and applying the same principles to ‘hack’ the NHS Change Model, in just one day. You don’t need any techie skills, just insight, ideas and energy to work with others to think deeply about change and collaborate over how we could do it better.
On the day, we:
Reviewed how change currently happens in health and care and what people leading change need to support them
Reviewed the NHS Change Model
Designed a proof of concept to support and enable change across health and care
Facts of Life - a Talk for Boys on sex education
The document provides information about puberty and adolescence for young people. It discusses the physical, emotional, and social changes that occur during this time, and emphasizes the importance of obtaining accurate information about sexuality from reliable sources like parents and books. The document also aims to reduce stigma and misconceptions by normalizing common experiences like erections, wet dreams, and masturbation.
Sexuality education - how to talk to your children about sex
The document discusses how parents can talk to their children about sexuality and sex education. It notes that sexuality education should begin at a young age through open communication. Parents are encouraged to take advantage of teachable moments and askable questions to have honest discussions about sexuality in an age-appropriate manner. Common questions from children at different ages are provided, along with tips for discussing puberty, relationships, and other topics with tweens and teens. The overall message is that parents should feel comfortable communicating factually with children to promote healthy attitudes about sexuality.
More Related Content
What's hot
Npm pfc35th specsheet
This document provides specifications for the NPM PFC35TH-48 tin-can stepper motor from Nippon Pulse. It has 48 steps per revolution, operates from 9 volts, and has a holding torque of 33 mN-m. The motor has a operating temperature range of -10 to 50 degrees Celsius and can withstand temperatures up to 100 degrees Celsius.
741c amp op
The NTE941M and NTE941SM are general purpose operational amplifiers that offer protection from overloads and oscillations. They have a supply voltage rating of ±18V, can withstand differential input voltages up to ±30V, and provide continuous short-circuit protection on the output. Both models come in 8-pin packages and have typical operating characteristics such as input offset voltage below 7.5mV and voltage gain above 20V/mV.
Machines deatails1
This document provides specifications for several pieces of electronic assembly equipment, including:
- A WSM 180 wave soldering machine with a 7" wave width and conveyor speed of up to 6 ft/min for automatic soldering.
- An RF300 reflow soldering oven with 3 heating zones, 850mm heated length, and maximum temperature of 300C for SMT component assembly.
- A YV100X pick and place machine with accuracy of ±0.1mm for chip components, maximum mounting speed of 1.7sec/QFP, and capacity for 8-56mm tapes and trays.
- An S1200 semi-automatic printer with a printing speed up
Eta uv oven introduction
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue,uv
photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant
surface cured and dried.
ETA UV Oven Introduction
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue, uv photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant surface cured and dried.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
Tecnotion ul series_specsheet
This document provides specifications for various magnet yoke and coil unit configurations for an ironless synchronous motor. It includes dimensions, weights, electrical parameters like current and resistance, thermal properties, and mechanical details. Performance metrics like force, speed, and power loss are given for different motor sizes from UL3 to UL15 under various operating conditions. Approvals information and references to additional resources are also included.
Tecnotion uxx series_specsheet
This document provides specifications for various UXX series ironless motors from Tecnotion BV. It includes performance parameters such as peak and continuous force, speed, and motor constants. It also lists electrical characteristics like current, voltage, resistance and inductance. Additional details cover thermal properties, mechanical dimensions, cable types, and approvals. The document is intended to aid selection of appropriate ironless motors for applications.
Htc laser distance meter dm 86
This document summarizes the features and specifications of the DM-86 31⁄2 digital multimeter. It measures DC and AC voltage, DC and AC current, resistance, temperature, has features like diode and transistor testing, continuity testing, low battery indication, and auto power off. It has basic accuracy ranges from ±(0.5% + 4) to ±(1.5% + 5) depending on the measurement function. Additional features include non-contact voltage detection, 10MΩ input impedance, 3 samples/second, 40-400Hz AC frequency response, and it runs on a 9V battery with approximately 30 minutes of auto power off time. Standard accessories include test leads, holster, temperature probe
Beam roll forming machine
Superda beam roll forming machine for logistic sy beam box, construction usinb beam, steel beam production, super design roll forming machine.
TMT80
The document provides product information for the iTemp TMT80 programmable head transmitter, including an overview of its application and functions, technical specifications and dimensions, details on electrical connection and pricing, and contact information for the manufacturer. The TMT80 can be used with various temperature sensors and has a 4-20 mA output, with its measuring range configurable via software. It is suitable for installation in a sensor head and provides accurate temperature measurement and transmission of signals.
Portable x ray
Ultrasound Scanner Manufacturers ,palm ultrasoundscanner,color ultrasound scanner,doppler ultrasound,dopplercolor ultrasound,China Ultrasound Scanner
Manufacturers, Ultrasound Scanner Suppliers,China Ultrasound Scanner
Htc ac clamp meter 1000amp cm 2030
This document provides specifications for the CM-2030 AC Clamp Meter that can measure up to 1000 amps. It lists the meter's key features such as being fully protected and having a 52mm jaw opening. The technical data section specifies the meter's measurement ranges, resolutions and accuracies for functions like DC voltage, AC voltage, AC current, resistance, diode testing and continuity testing. It concludes with standard accessories, dimensions and contact information for the manufacturer.
Lcr meter-6630 e
The test frequency of the 6630E economic LCR meter is AC 10Hz-10MHz. and is suitable for the LCR testes of AC signals.
Htc ac leakage current tester cl 2054
The CL-2054 is an AC leakage current tester with high resolution up to 10uA and a large LCD display. It can measure current from 40mA to 100A, voltage up to 400V, and resistance from 40Ω to 400Ω. Additional features include auto power off, data hold, overload protection, and low battery indication. Standard accessories include test leads, a soft carrying case, and manual. The dimensions are 209mm x 43mm x 30mm.
What's hot (14)
Viewers also liked
project(theerapong)
This document discusses using acoustic emission testing to check for stress corrosion in pressure vessels and materials. It explains that stress waves can be instant or continuous and are caused by stress on pressure vessels. Different types of stainless steel have varying susceptibility to stress corrosion due to cracking of the passive film on the material's surface. The document also details how to collect acoustic emission signal data from sensors and calculate the location of stress corrosion wave origins using the time delay between two sensors and the wave propagation speed.
Cm8821 coating thickness gauge
The CM8821 coating thickness gauge from Mextech Instruments measures the thickness and corrosion of materials like pressure vessels, chemical equipment, and oil storage tanks in various industries. It uses magnetic induction to measure within a range of 0 to 1000um with a resolution of 0.1/1 and accuracy of ±1-3% or ±2.5um, requiring only a 6mm minimum measuring area and 0.3mm minimum sample thickness.
Semiotics Of Phallic Symbolism
The document discusses various phallic symbols and their use in media and advertisements. Some examples of phallic symbols mentioned include penises, guns, missiles, rockets, trains rushing into tunnels, buildings, axes, fountains, shower heads, towers, microphones, snakes, and the letter A in the AXE logo. Phallic symbols are used to represent masculinity, power, fertility and male domination. They are frequently employed in advertising to subliminally convey these meanings.
M health 1
1. M-health requires body sensor networks with devices that can measure vital signs like temperature, blood pressure, heart rate, respiratory rate, and blood sugar, as well as a connection system.
2. It also requires medical apps and health apps running on mobile devices to analyze and transmit the sensor data.
3. Common m-health sensor devices include pulse oximeters, EKG monitors, accelerometers, and sensors that can detect respiration rate, body temperature, and other vital signs. The data is transmitted wirelessly to mobile apps for further analysis and monitoring.
Stress corrosion cracking
The document discusses stress corrosion cracking (SCC), which is the failure of metal due to the combined effect of stress and chemical attack. SCC requires a susceptible metal, a specific corrosive environment, and an applied tensile stress. An example is given of the 1974 Flixborough explosion in the UK caused by SCC in mild steel exposed to hot nitrate solution under stress. SCC can initiate and propagate cracks without visible corrosion and cause sudden catastrophic failure. It commonly occurs at flaws, grain boundaries, or corrosion pits. The mechanisms of SCC include both anodic dissolution due to pre-existing flaws or grain boundary precipitates, as well as rupture of protective films by plastic strain. Prevention methods include choosing non-sus
NHS Change Model hack day full report
Here is the full report of the NHS Change Model hack event, which took place on Wednesday, 14 October 2015.
There has never been a better time to really scrutinise the way we go about change in health and care. There is a growing body of evidence and practical know-how behind effective and successful change and we must make sure that our change efforts are designed to take full account of the evidence based and lessons learned.
The NHS Change Model has been one of the leading models of change used in the NHS over the past couple of years. We know that some improvement leaders would not be without it and use the model extensively, to underpin and structure all their change activities. We also recognise that there are some change leaders that are not so keen on the NHS Change Model. They have found it hard to apply the model in a practical and useful way and there are others who think that it should be broadened out from just being an NHS-specific model.
The way we lead change must always adapt and evolve with the times and as such, we feel it is timely and opportune to review and revise the NHS Change Model. Our starting point is hearing and understanding exactly what the people leading change in health and care say they need to support them. We want to use methods that fly in the face of tradition and open up new, exciting and creative opportunities.
We organised a hack day for about 80 selected people that brought diverse and wide-ranging perspectives to the table. Hack events have traditionally been associated with technology and programming to solve problems, but we are adapting the concept and applying the same principles to ‘hack’ the NHS Change Model, in just one day. You don’t need any techie skills, just insight, ideas and energy to work with others to think deeply about change and collaborate over how we could do it better.
On the day, we:
Reviewed how change currently happens in health and care and what people leading change need to support them
Reviewed the NHS Change Model
Designed a proof of concept to support and enable change across health and care
Facts of Life - a Talk for Boys on sex education
The document provides information about puberty and adolescence for young people. It discusses the physical, emotional, and social changes that occur during this time, and emphasizes the importance of obtaining accurate information about sexuality from reliable sources like parents and books. The document also aims to reduce stigma and misconceptions by normalizing common experiences like erections, wet dreams, and masturbation.
Sexuality education - how to talk to your children about sex
The document discusses how parents can talk to their children about sexuality and sex education. It notes that sexuality education should begin at a young age through open communication. Parents are encouraged to take advantage of teachable moments and askable questions to have honest discussions about sexuality in an age-appropriate manner. Common questions from children at different ages are provided, along with tips for discussing puberty, relationships, and other topics with tweens and teens. The overall message is that parents should feel comfortable communicating factually with children to promote healthy attitudes about sexuality.
Sex and sexuality powerpoint
The document discusses key concepts about sexuality including sex, gender, sexual orientation and sexually transmitted diseases (STDs). It defines important terms like sexuality, sex, gender, sexual orientation, and STDs. It describes the different types of STDs like chlamydia, gonorrhea, genital herpes, and genital warts. It notes that abstinence is the only 100% effective way to avoid STDs and discusses other methods like safe sex practices and getting tested. The document aims to help students distinguish between facts and misinformation regarding human sexuality and sexual health.
Las25tecnicasyconsejos
Este documento presenta 25 consejos para darle a una mujer múltiples orgasmos, incluyendo técnicas de sexo oral, estimulación con los dedos, posiciones sexuales y consejos sobre comunicación, relajación y anticipación. El autor, Kevin Adams, es un terapeuta sexual que busca mejorar las relaciones íntimas de las parejas a través de estas recomendaciones.
LUMA's The State of Digital Video
LUMA Partners presents “The State of Digital Video,” as presented at the VidCon conference on January 23, 2015. This presentation reviews some of the key topics discussed at the conference: the rise of digital video, the traditional TV model, and convergent video.
Viewers also liked (11)
Sexuality education - how to talk to your children about sex
Sexuality education - how to talk to your children about sex
Similar to Cm8825 fn coating thickness gauge
DYMH-105.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYMH-104.pdf
The document describes a membrane box sensor that features high stability, can be installed in small spaces, and can be customized. It has stable anti-interference signals, is made of quality stainless steel, and is widely used in automobile, 3C production, medical, and industrial testing applications. It provides technical specifications for the sensor's rated range, output sensitivity, non-linearity, repeatability, temperature sensitivity, response frequency, materials, and operating conditions.
DYMH-107.pdf
The document describes a membrane box sensor manufactured by DAYSENSOR. It has the following key features:
- It is stable, can be installed in small spaces, and can be customized for non-standard uses.
- It has stable anti-interference signals, is made of quality stainless steel, and is widely used in automobile, 3C production, medical, and industrial testing applications.
- It has a rated force range of 0-20KN, output sensitivity of 1.5-2.0mV/V, and other technical specifications including temperature sensitivity and cable specifications. Custom high temperature and impedance options are available.
DYZ-015.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYMH-103.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYMH-113.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYMK-001.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYPB-003.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYMH-106.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYHX-003.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
transformerdesignandprotection-130408132534-phpapp02.ppt
The document discusses transformer protection principles and methods. It describes various types of faults that can occur in transformers like ground faults, phase-to-phase faults, and interturn faults. It then covers mechanical protections like Buchholz relays, sudden pressure relays, pressure relief valves, and temperature indicators. Electrical protections discussed include biased differential relays, restricted earth fault relays, and overfluxing protection relays with inverse-time characteristics to match transformer thermal withstand capabilities.
Transformer design and protection
This document discusses transformer protection philosophy and methods. It describes various types of faults that can occur in transformers like ground faults, phase-to-phase faults, interturn faults, and core faults. It also discusses mechanical protections like Buchholz relay, sudden pressure relay, pressure relief valve, and temperature indicators. Electrical protections discussed include biased differential relay protection and harmonic restraint. The document provides details on how these protections work and their settings.
DYDW-001.pdf
DYDW-001 Cantilever sensor two-dimensional force weighing bidirectional sensor 50kg 100kg 200kg 500kg 1t
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
This document provides specifications for HTR's HMVL series of current sense resistors. The resistors are ceramic encased for high temperature operation from -55°C to +275°C. They are available in power ratings from 2.5W to 15W and resistance values from 0.004 ohms to 20 ohms. The document lists detailed dimensions, electrical characteristics, performance test requirements, applications, and ordering information for the HMVL series current sense resistors.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
This document describes a ceramic encased current sense resistor product called the HMVL series. It provides key specifications such as power ratings from 2.5W to 15W, resistance ranges from R004 to R20, operating temperature range from -55°C to +275°C, and electrical performance requirements for parameters like resistance tolerance, voltage rating, insulation resistance, and temperature coefficient of resistance. It also lists typical applications, ordering information, and provides dimensions and other details.
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl.pdf
This document describes a ceramic encased current sense resistor product. It provides specifications for the product including its physical dimensions, resistance range, power ratings, electrical characteristics, and performance test requirements. It also lists some typical applications for the resistor and provides information on ordering.
DYMK-003.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
Hydraulic utm
This document provides specifications for several models of hydraulic universal testing machines from the WES-B, WES-D, WEW-B, WEW-C, and WEW-D series. The machines can perform tensile, compression, and bending tests and have features like hydraulic clamping, adjustable test spaces, safety mechanisms, and LCD or PC displays to show load and test results. They are suitable for testing materials like metals, concrete, and polymers. The specifications tables provide details on maximum load capacity, measurement accuracy, test space dimensions, and other technical details for each model.
DYZ-101.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
DYZ-011.pdf
The document describes a column sensor manufactured by DAYSENSOR that:
- Has high stability and can be installed in small spaces. It uses high quality alloy steel.
- Has applications in automobile compression, automatic assembly, 3C production testing, new energy product assembly, medical testing, and other industrial fields that require dynamic equipment testing.
- Provides technical specifications for the sensor's rated range, output sensitivity, zero point output, non-linearity, lag, repeatability, creep, temperature sensitivity drift, zero temperature drift, response frequency, material, impedance, insulation resistance, use voltage, operating temperature range, safety overload, extreme overload, cable specifications, and cable limit pull force.
Similar to Cm8825 fn coating thickness gauge (20)
transformerdesignandprotection-130408132534-phpapp02.ppt
transformerdesignandprotection-130408132534-phpapp02.ppt
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl.pdf
Htr india-products-current-sense-resistors-ceramic-encased-resistor-hmvl.pdf
More from angelochintu
Vintron Products
Established in the year 2012, We Chronicle Solution are the reputed trader, importer, distributor, wholesaler, supplier of a wide series of Security Products. We are famous in the market for our comprehensive products range that comprises of CCTV Cameras, CCTV Surveillance Systems and CCTVs, CCTV cables & accessories, Spy cameras & devices, Biometrics & VDPs,. In addition to the range of efficient products, we provide reliable and flexible installation services of the presented security equipment. We use quality grade raw materials obtained from our dependable and trusted vendors for manufacturing these products and make user that all the industrial guidelines are followed during and after the production process
Suvidha Services
Suvidha Services provides commercial and residential cleaning services throughout India. They have been in business since 2002 and serve over 600 customers with specialized cleaning through annual contracts. Their services include mechanized cleaning, carpet and furniture cleaning, pest control, plumbing, and more. They aim to provide high quality services using advanced tools and equipment in order to satisfy customers.
SLPL Group Pharma Profile
Praful Wahadude founded the SLPL Group of companies in 2000. SLPL Group engages in pharmaceuticals, construction, and tourism businesses. Specifically, SLPL is a pharmaceutical company that manufactures over 350 drug formulations, including active pharmaceutical ingredients and generics. It has a presence across Maharashtra, Madhya Pradesh, and Chhattisgarh, catering to over 21,000 physicians through hospitals, institutes, and nursing homes.
Fitness Equipments Commercial Range
“Magnus Fitness World” counted amidst the renowned firms which are engaged in trading and supplying of quality-assured Gym & Sports Equipment. We are providing a wide range of this fitness equipment which includes Motorized Treadmill, Cross Elliptical Trainer, Exercise Bike, Manual Jogger, Home Gym Equipment, Gym Stepper, Gym Rower, Strength Equipment, Fitness Accessories, Sports Racket and Cardio Sports Watch. All these equipment are sourced from some of the reputed vendors who used ultra-grade components, raw material and tools to manufacture these products.
Fitness Equipment Home Range
“Magnus Fitness World” counted amidst the renowned firms which are engaged in trading and supplying of quality-assured Gym & Sports Equipment. We are providing a wide range of this fitness equipment which includes Motorized Treadmill, Cross Elliptical Trainer, Exercise Bike, Manual Jogger, Home Gym Equipment, Gym Stepper, Gym Rower, Strength Equipment, Fitness Accessories, Sports Racket and Cardio Sports Watch. All these equipment are sourced from some of the reputed vendors who used ultra-grade components, raw material and tools to manufacture these products.
Industrial Valves Catlogue
The document is a repetitive listing of "IndusTech Corporation" without any other details. It does not contain any substantial information that can be summarized in 3 sentences or less.
kitchen Basics Nagpur Hob presentation
Kitchen Basics one stop shop for all your kitchen needs was started by Ms. Kranti Gedam with an aim to provide international quality products at reasonable prices in a somber atmosphere.
Sujalam Consultants Presentation
"Sujalam Consultants" established in year 1998, as proprietary consultants in the field of groundwater exploration, has now grown in terms of expertise and experience as a multidisciplinary in the field of Environment, Engineering, Geology and Mining etc.
We have successfully completed the Reaccreditation of QCI NABET in Categoery A to carry out Geological and Hydro-geological Studies for various developemental activities like Mining, Thermal Power Plants, Township etc,
Headhunt Consultant Presentation
Headhunt Management Consultant is a well-known staffing agency in Central India established in 1998. It is managed by experienced professionals and has 4 staff members. The agency receives job requirements from clients, searches its database and conducts preliminary interviews to identify suitable candidates. If a candidate is deemed suitable, their resume is forwarded to the client. If the client is satisfied, the agency will arrange an interview. The agency's main focus is providing candidates for cement plants due to its advisor's experience in the cement industry. It has various large companies as clients and expects clients to provide clear job descriptions to help identify the best candidates.
D.light dealer presentation
Industry leading 2 yr Free Replacement warranty
Long life – 5+ years
Completely maintenance free
Heat resistant
Impact resistant
Water resistant
Dust resistant
South et 02
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Trimble m3
The Trimble M3 total station offers reliable mechanical technology combined with powerful Trimble Access field software. It features a compact, lightweight design and provides long battery life of up to 26 hours. The Trimble Access software includes modules for topographic surveys, staking, control, and road design capabilities like importing alignments and guiding offset staking.
Machine Catalouge
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Total Station
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Functional Excellence Station
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Total Station
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Surveying Instruments
Alpha Engineering Equipments was established in 1992. We are a leading trader, supplier and exporter of Surveying and Testing Equipment in Nagpur. Our range finds extensive application in accurately identifying angles, elevation and direction, and assessing bitumen, cement and soil. Apart from these, the range can also be used to test metals, concrete, tar, fuel, rubber, leather.
Mechano lifting tackles catalogues
Established in the year 2011, we, “Mechano”, are engaged in manufacturing and supplying a wide range of Material Handling Equipment and Industrial Machines. The comprehensive range offered by us includes Roller Conveyors, Industrial Belt Conveyors, Belt Conveyors, Hand Trolleys, Bucket Elevators and Horizontal Ribbon Mixers. In addition to this, we offer Paddle Mixers, Sigma Mixers, Detergent Powder Mixers, Vertical Mixers, Nylon Conveyor Belts and Rubber Conveyor Belts.
Mechano products catalogue
Established in the year 2011, we, “Mechano”, are engaged in manufacturing and supplying a wide range of Material Handling Equipment and Industrial Machines. The comprehensive range offered by us includes Roller Conveyors, Industrial Belt Conveyors, Belt Conveyors, Hand Trolleys, Bucket Elevators and Horizontal Ribbon Mixers. In addition to this, we offer Paddle Mixers, Sigma Mixers, Detergent Powder Mixers, Vertical Mixers, Nylon Conveyor Belts and Rubber Conveyor Belts.
More from angelochintu (20)
Cm8825 fn coating thickness gauge
- 1. MEXTECH TM INSTRUMENTS OF TOMORROW COATING THICKNESS GAUGE Model: CM8825FN Application:- Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. In built probe(s) • Operating principle: magnetic induction/eddy current (F/NF) • Measuring range:0-1250um/0-50mil • Resolution; 0.1/1 • Accuracy: ±1-3%n or ±2.5um • Min. measuring area: 6mm • Min. sample thickness: 0.3mm • Battery indicator: low battery indicator • Metric/ imperial: convertible • Power supply: 4x1.5V AAA(UM-4)battery • Auto power off • Operating conditions:0-+45℃(32℉-104℉),≤90%RH • Optional accessories: other range 0-200um to 15000um