This document provides an overview of construction materials. It begins with an introduction and outlines the scope, selection criteria, classification, and properties of construction materials. It then discusses Griffith's theory of brittle fracture and hardness and toughness tests. The document is presented as part of a chapter on construction materials for civil engineering students. It covers topics such as the types of construction materials based on chemical composition, use, and origin. It also examines the physical, mechanical, thermal, electrical, magnetic, and chemical properties of various materials. Hardness tests and Griffith's theory of brittle fracture are explained. The document is intended to provide students with foundational knowledge on construction materials.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
1. Chapter-1 (4 hrs)
Introduction
1.1 Scope of construction materials
1.2 Selection criteria of construction materials
1.3 Classification of construction materials
1.4 Properties of construction materials
1.5 Griffith’s theory
1.6 Hardness and toughness tests of construction
materials
Prepared by: Ramesh Bala; Khwopa College of
Engineering 1
2. Scope of the Subject
Civil Engineering Sector
Hydropower -> construction of
Power house, dam reservoir and
other structures.
Road Construction -> Road
Protection work, Retaining Wall,
Pavement Work etc
Building Construction ->
Foundation work, Superstructure
work, Finishing work etc
Water Supply -> construction of
headwork , canal, dam etc
Sanitary -> Drainage system,
sludge tank construction etc
Prepared by: Ramesh Bala; Khwopa College of
Engineering 2
3. 1.2 Selection Criteria of Construction
Material
Material selection criteria depends upon:
Locally availability of natural resources
Availability of skilled Manpower
Availability of material in nearest market
Technology Used
Budget availability
Economic Benefit
Prepared by: Ramesh Bala; Khwopa College of
Engineering 3
4. 1.3 Types of construction materials:
A) According to chemical compositions
1) Organic materials:
◦ Organic materials contains basically carbon as
key material
◦ E.g.: timber, plastic, bitumen, petroleum etc.
2) Inorganic materials:
◦ Inorganic materials basically contain silica,
calcareous materials containing calcium
compounds & argillaceous materials like clay.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 4
5. B) According to uses:
1) Structural material
Stone, brick, steel etc.
2) Aesthetic material
Tiles, marbles, paints etc.
C) According to existence:
1) Natural material
Stone, sand, clay, wood etc.
2) Artificial material
Cement, plastic, brick etc.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 5
6. D. According to metallurgy
Metal
Ferrous metal and its alloys e.g. Cast Iron,
Wrought Iron and steel similarly silicon steel,
spring steel etc
Non Ferrous metals and their alloys e.g.
copper, aluminium, zinc etc similarly, brass ,
bronze etc
Non- Metal
e.g. Building Stones, Cement, Rubber,
Plastics, Paint and Varnishes, asbestos ,etc
Prepared by: Ramesh Bala; Khwopa College of
Engineering 6
7. 1.4 Properties of Construction Materials
Physical Properties
Mechanical properties
Thermal Properties
Electrical Properties
Magnetic Properties
Chemical Properties
Prepared by: Ramesh Bala; Khwopa College of
Engineering 7
8. Physical Properties
1. Specific gravity:
It is the ratio of density at material to the density of
water at standard condition.
2. Density:
It is the ratio of mass of the material to the total volume
of the materials.
Density = M/V Unit kg/m3
3. Porosity:
It is the ratio of volume of voids in the material to the
total volume of the materials.
Prepared by: Ramesh Bala; Khwopa College of
Engineering 8
9. 4. Permeability:
It is the property where by the material allows
water to pass through its pore.
5. Water absorption:
It is the ability of material to absorb & retain
water.
6. Fire resistance:
It is the property of material to resist fire
7. Durability:
It is the resistance of material to disintegrate by
natural agencies like humidity variation,
chemical attack, action of atmosphere gases
etc. Prepared by: Ramesh Bala; Khwopa
College of Engineering 9
10. Mechanical properties
Mechanical properties are important to determine the load resisting
capacity, durability etc. These are:
1. Strength:
property of material to resist the applied load without failure.
Common types of strength properties found in construction
material are:
a. Tensile Strength:
It is maximum stress that a material can withstand under a
tensile load without failure is known as strength.
b. Compressive strength:
It is maximum stress that a material can withstand under a
compressive load without failure is known as compressive
strength.
c. Shear Strength:
It is the maximum stress that the material can withstand
under shear force without failure is known as shear strength.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 10
11. Stress and Strain
• When a body is
loaded, the restoring
force per unit area,
comes into play inside
the body, it is called
stress. Its unit is
N/mm2 or KN/m2.
• Types:
1. Tensile stress
2. Compressive stress:
3. Shear stress:
• change in dimension
to original dimension
when a body is
subjected to external
force
• Types:
1. Tensile strain
2. Compressive strain
3. Shear strain
Prepared by: Ramesh Bala; Khwopa
College of Engineering 11
12. Prepared by: Ramesh Bala; Khwopa
College of Engineering 12
Tension, compression, shear, and torsion
13. 2. Elasticity
property of material by which material tends to
regain its shape after the removal of applied
load.
Elasticity of material is defined upto limit called
elastic limit. After crossing this limit material
become plastic.
A material is said to be perfectly elastic if the
whole of the stress produced by a load
disappears completely on the removal of
the load.
The modulus of elasticity of young’s
modulus (E) is the proportionality constant
between stress and strain for elastic materials.
Prepared by: Ramesh Bala; Khwopa College of Engineering 13
14. Poisson’s ratio – The ratio of lateral
or transverse strain to the longitudinal
strain.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 14
Poisson’s ratio for most materials ranges
from 0.25 to 0.35.
Cork ⇒ ν ≈ 0.0
Steel ⇒ ν = 0.27 – 0.30
Aluminum ⇒ ν = 0.23
Rubber ⇒ ν ≈0.5 (limiting value for
Poisson’s ratio)
15. 3. Plasticity -> property that enables
the formation of permanent
deformation in a material. Gold and
lead are highly plastic material.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 15
16. 4. Ductility -> ability of metal to
withstand elongation or bending. Due
to this property, wires are made by
drawing out through a hole.
5. Malleability -> property by virtue of
which a material may be hammered or
rolled into thin sheets without rupture.
Such properties increase with increase in
temperature.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 16
17. 6. Toughness (or tenacity)
ability of material to
absorb energy due to
straining action
undergoing the plastic
deformation
Due to molecular
attraction of metal the
power resist the metal
tearing apart, strength
with which the material
rupture.
Area under stress strain
curve indicate the
toughness.
It is express as energy
absorbed (Nm)per unit
volume of material
Prepared by: Ramesh Bala; Khwopa
College of Engineering 17
18. 7. Brittleness -> lack of ductility thus break
easily when subjected to shocks.
8. Hardness -> resistance of material to
penetration. It resist scratch or being worn
out by friction with another body.
9. Fatigue -> development of facture
when material subjected to fluctuating
or repeating load. Such failure starts at
the point of highest stress.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 18
19. 10. Creep -> Slow plastic deformation of
metals under constant stress or under prolong
loading usually at high temperature.
11. Impact strength:
It is the property of material to the resist certain
sudden shock or impact over the material.
12. Abrasive Resistance
property to resist the wearing of the surface of
the material due to the friction between one
another.
Prepared by: Ramesh Bala; Khwopa College of Engineering 19
20. 13. Resilience: is the capacity of a material
to absorb energy when it is deformed
elastically and then, upon unloading, to
have this energy recovered.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 20
21. Chemical Properties
- describes the combining tendencies,
corrosion characteristics, reactivities,
solubilities, etc. of substances.
- Some chemical properties are:
Corrosion resistance
◦ Corrosion is a gradual chemical or electro
chemical attack on a metal by its
surroundings so that the metal is
converted into an oxide, salt or some
other compound.
Prepared by: Ramesh Bala; Khwopa College of
Engineering 21
22. Oil & petrol resistance:
◦ ability of material to withstand attack by
liquid, fuels etc.
◦ Oil & petrol resistant must be taken
choosing floor covering for garage,
industrial building, service station etc.
Acid resistant & alkali resistant:
◦ ability of material to withstand attack by
acid & alkali respectively.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 22
23. Thermal properties of material
Important in the
structure where there is
frequent change in
temperature.
1. Specific heat capacity:
It is defined as the
amount of heat required
to raise the temperature
of unit mass of material
by 1⁰C.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 23
24. 2. Thermal conductivity (K):
amount of heat transmitted in unit time
through unit area over unit length
perpendicular to the direction of heat
flow when the temperature gradient
across the heat considering unit is
1⁰C.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 24
26. Electrical Properties
- It indicates the ability of material to permit or
resist the flow of electricity.
- Following are the electrical properties of
material:
Resistivity - Electrical property of material
that resists the flow of electricity through it.
Resistivity, ρ =
R.A
l
Where, R = resistance of the conductor
A = cross section area of the
conductor
l = length of the conductor
Prepared by: Ramesh Bala; Khwopa
College of Engineering 26
27. Conductivity - reciprocal of resistivity. i.e.
material provides an easy path for the flow of
electricity through it.
σ =
1
ρ
=
l
R.A
Temperature coefficient of resistance -
indicate the variation of resistivity with
temperature.
αT=
ρ−ρo
ρo
1
T−To
Where,
Ρ = resistivity at temp. T
ρo= resistivity at temp. To
T and To are degrees kelvin Prepared by: Ramesh Bala; Khwopa
College of Engineering 27
28. Electrical Properties cont. ..
Dielectric strength - insulating capacity
of a material against high voltages. A
dielectric is an insulation.
Thermoelectricity
– production of small
voltage in the junction between two
dissimilar metals when they are joined
together.
Prepared by: Ramesh Bala; Khwopa College of
Engineering 28
29. Magnetic Properties
Such properties of material create a
magnetic field in the surrounding.
- Magnetic properties arise from the
spin of electrons and orbital motion of
electrons around the atomic nuclei.
- Study of magnetic properties is
necessary as it helps to know the
structure and behavior of the matter.
Prepared by: Ramesh Bala; Khwopa College of
Engineering 29
30. Magnetic Properties of
Materials
Prepared by: Ramesh Bala; Khwopa
College of Engineering 30
Ferromagnetic: material with a
permanent magnetic dipole
Paramagnetic: material attracted by
a magnetic field
Diamagnetic: material repulsed by a
magnetic field
Non-magnetic: material insensitive
to a magnetic field
31. Define the term ductility and
resilience. Determine the young’s
modulus and Poisson’s ratio of
metallic bar of length 60cm, breadth
6cm, when subjected to an axial
tensile load of 500KN. The increase in
length as 0.09cm and decrease in
depth is 0.005cm
Prepared by: Ramesh Bala; Khwopa
College of Engineering 31
32. Griffith theory for brittle
fracture:
Fracture is a separation of a body
caused either by physical or chemical
forces into two or more parts resulting
in the creation of new surface.
When the fracture of material occurs
without or with less plastic deformation
the fracture phenomenon is known as
brittle fracture.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 32
33. The fracture of brittle material was
studied by A. A. Griffith in 1920.
He suggested that, “in any brittle non metallic
substances such as glass, minute crack or
fissures particularly occurring at the surface
acts as stress raiser by concentrating
stresses at their tips.”
It means energy required for fracture of
brittle material is not uniformly distributed
over the volume of materials. But their
region of energy concentrated is
produced by minute faults & cracks in the
materials. Prepared by: Ramesh Bala; Khwopa
College of Engineering 33
34. Griffith theory of brittle fracture:
Crack propagation criterion:
Consider a through thickness crack
of length 2a, subjected to a uniform
tensile stress σ, at infinity.
Crack propagation occurs when the
released elastic strain energy is at
least equal to the energy required
to generate new crack surface.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 34
35. Prepared by: Ramesh Bala; Khwopa
College of Engineering 35
The stress required to create the new crack
surface is given as follows :
where,
σ = critical stress
E = Young’s modulus of elasticity
γs= Surface energy per unit area
a = half of length of an internal cracks
Note:
Fracture stress depends upon:
• Crack size
• Properties of material
40. Hardness & Toughness test of
Construction materials
Hardness tests
One of the most simple & useful property
of metal is hardness.
Hardness is used to find out many
qualities of a metal.
indicate resistance to abrasion,
scratching, cutting or shaping.
It may denote strength, stiffness,
brittleness etc.
The hardness of the material implies the
resistance to deform or indentation.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 40
41. Three types of hardness
tests:
1) Scratch hardness test
determines scratching & abrasion
quality of a metal when scratched
by a standard substance.
The standard substances are
either minerals or files.
Some minerals have been given
hardness numbers from 1 to 10 on
the Mohr scale.
The softest mineral on this scale is
talc.
Diamond has the maximum
hardness of ten (10).
determined by trial method like
which minerals scratch a smooth
surface of substance & which
mineral can be scratched by the
substance.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 41
Mohr scale
42. Another method is filling. The mineral
to be tested is rubbed against a
standard file or vice-versa & it is noted
whether a visible cut is produced or
not on the metal surface.
The visible cut on the metal surface is
produced if the hardness is lower than
that of the file.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 42
43. 2) Indentation hardness test or penetration
test
based on the principle of forcing a hard
material called an indenter against a flat
surface of the metal whose hardness is to be
measured under a fixed load depending upon
its hardness.
The metal resists deformation & finally an
impression is made by the indenter on the
surface of the metal.
The diameter or depth of the impression
determines the hardness of the metal & after
the measurement it could be converted into a
relative quantitative value.Prepared by: Ramesh Bala; Khwopa
College of Engineering 43
44. Some of the indentation hardness
tests are:
◦ Brinell hardness test
◦ Rockwell hardness test
◦ Vickers hardness test
Prepared by: Ramesh Bala; Khwopa
College of Engineering 44
45. i) Brinell hardness test
The test consist in
forcing a steel ball of
diameter, D under a
load P into the test
piece & measuring
the mean diameter
of the indentation
left in the surface
under test after
removal of the load.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 45
46. ii) Rockwell hardness test
In this method, Rockwell
test machine measures the
depth of impression, the
measurement is read on
the dial of the micrometer
which is connected to the
indenter,
The indenter in Rockwell
hardness testing machine
is either a steel ball, hard
steel ball or a carefully
ground diamond cone.
Ball size varies from 1.5
mm to 3 mm diameter
Prepared by: Ramesh Bala; Khwopa
College of Engineering 46
47. Method:
A completely flat specimen is supported by
the Anvil of the machine which is raised up
by a jack-screw until the specimen comes
in contact with the indenter.
A minor load is then applied by raising
Anvil.
The final load is then applied by releasing a
system of levers which forces the indenter
down onto the surface of the specimen.
Before the reading of dial-gauge, the laser
is taken, the major load is removed leaving
the indenter in the new position but only
under the minor load of 10 kg.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 47
48. iii) Vickers hardness test
This test is similar to Brinell
hardness test.
In this test indenter is a diamond
pyramid having four side.
The angle between opposite side
is 136⁰. The indenter size is
square.
The load is automatically applied &
released after the correct time.
The specimen is removed from the
indenter & diagonal of the
impression is measured using
microscope & eliminating lamp.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 48
49. 3) Rebound hardness test
In this test, the specimen at which hardness
is determined by dropping on a small
diamond pointed hammer, on the surface
& observing the height of rebound.
A steel cylinder hammer is dropped from a
height of 25 cm through a glass tube on the
surface to be tested.
The height of the rebound is used as a
measure of hardness of surface.
The surface to be tested should be smooth,
free from oil and tube should be truly vertical.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 49
50. Impact Test:
When materials are subjected to a
sudden stress or shock, the behavior
of the material will not be as that in the
case of hardness test.
Impact test is performed for very rapid
stresses & the impact load is applied
by swinging pendulum which collides
with the specimen.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 50
51. Charpy
test:
Prepared by: Ramesh Bala; Khwopa
College of Engineering 51
A standard specimen of
55 mm long 10 mm
square section with U-
Notched facing
downward is supported
at each end.
i. Striking energy of
the testing machine
should 30 kg force-
meter & the
difference between
the supports is 40
mm.
ii. Notched in 5 mm
deep rounded off at
the base with a
iii. The test piece is
stroked by hammer in a
plane of symmetry of
notched & on the side
opposite to the notched.
Then impact strength of
the material is noted
from dial gauge.
52. iv. The impact strength is the energy
absorbed per unit volume during the
fracture of the materials.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 52
53. Izod test:
The test consist
breaking of the
specimen by one
blow from a
swinging hammer.
The specimen is
placed vertically
with bottom of the
Notched. In the
same plane, the
blow is stroked.
Prepared by: Ramesh Bala; Khwopa
College of Engineering 53
54. Prepared by: Ramesh Bala; Khwopa College of Engineering 54
for your kind attention