The document discusses product liability law and various legal theories for recovery, such as express warranty, implied warranties, negligence, and strict liability. It also covers other theories of recovery, defenses, damages, disclaimers, and statistics related to product liability cases. The overall topic is an overview of the legal framework and considerations for product liability lawsuits in the United States.
Justification of Torts & General Defencesairlawacademy
Liability under Tort is a bit tricky subject. Only the injury which is legal but not any actual damage is protected and compensated. But as no law is good without its exception, such is Law of Torts without the General Defences and Justification.
Justification of Torts & General Defencesairlawacademy
Liability under Tort is a bit tricky subject. Only the injury which is legal but not any actual damage is protected and compensated. But as no law is good without its exception, such is Law of Torts without the General Defences and Justification.
A contractual term is “Any provision forming part of a contract”.
Each term gives rise to a contractual obligation, breach of which can give rise to litigation.
Not all terms are stated expressly and some terms carry less legal gravity as they are peripheral to the objectives of the contract.
In general, parties can only sue for enforcement of valid contractual terms as opposed to representations or mere puffs.
An exemption clause is an agreement in a contract that stipulates that a party is limited or excluded from liability.
There are three types of clauses, these are a ‘limitation clause’; this is where a party is limited from liability.
The other is an ‘exclusion clause’; this is where a party is excluded from liability.
‘Time limitation clause’ states that an action for a claim must be commenced within a certain period of time or the cause of action becomes extinguished.
A Quick Guide to Action on Bouncing of ChequeAnil Chawla
Bouncing of a cheque invites criminal prosecution under section 138 of The Negotiable Instruments Act, 1881 in India. This Guide is meant to help entrepreneurs and small businesses cope with the problems that they often face when a cheque bounces. It gives the legal provisions in common man's language.
This is Remedies Law in the United States. This does not inlcude statutory or constitutional remedies. It is intended for law students who are currently taking this course in law school I hope you find my outlined notes useful.
Any civil wrong is subject matter of Law of torts. Principles of law of torts have been discussed in this presentation for the students in simple ways.
A contractual term is “Any provision forming part of a contract”.
Each term gives rise to a contractual obligation, breach of which can give rise to litigation.
Not all terms are stated expressly and some terms carry less legal gravity as they are peripheral to the objectives of the contract.
In general, parties can only sue for enforcement of valid contractual terms as opposed to representations or mere puffs.
An exemption clause is an agreement in a contract that stipulates that a party is limited or excluded from liability.
There are three types of clauses, these are a ‘limitation clause’; this is where a party is limited from liability.
The other is an ‘exclusion clause’; this is where a party is excluded from liability.
‘Time limitation clause’ states that an action for a claim must be commenced within a certain period of time or the cause of action becomes extinguished.
A Quick Guide to Action on Bouncing of ChequeAnil Chawla
Bouncing of a cheque invites criminal prosecution under section 138 of The Negotiable Instruments Act, 1881 in India. This Guide is meant to help entrepreneurs and small businesses cope with the problems that they often face when a cheque bounces. It gives the legal provisions in common man's language.
This is Remedies Law in the United States. This does not inlcude statutory or constitutional remedies. It is intended for law students who are currently taking this course in law school I hope you find my outlined notes useful.
Any civil wrong is subject matter of Law of torts. Principles of law of torts have been discussed in this presentation for the students in simple ways.
Product Liability Case & How To Handle ThemJoe Carson
Injured due to unsafe products? Manufacturers are liable for all products they produce that include defects. If you've been hurt because of a defective product or a product that's been recalled, then it might be time to take action.
Powerpoint from textbook Business Law - the ethical, global, and e-commerce environment to accompany BA 330 course at the University of Alaska Fairbanks.
Chapter Twelve Product and Service Liability LawWhen consumers ent.docxmccormicknadine86
Chapter Twelve Product and Service Liability Law
When consumers enter a store to purchase a product, they assume that the product will do the job the manufacturer claims it will do without injuring anyone, and the consumer may not be aware that each year more than 33.4 million injuries and around 28,200 deaths result from the use of products purchased in the United States.1 Deaths, injuries, and property damage from consumer products incidents cost the nation more than $700 billion annually.2 Estimates of the number of resultant product liability cases range as high as 1 million a year. Also, the verdicts for defective-product or product liability cases are increasing from year to year. The total of the five largest awards for product defect cases in 2009 was 52 percent larger than the total in 2008. In fact, the largest award from a 2009 product defect case amounted to around $300 million, from the Philip Morris tobacco case. Also, in 2008, only 1 of the 50 largest awards were the result of a verdict in a product defect case, but in 2009, 5 of the 50 largest judgments were awarded in product defect cases.3
1 U.S. Department of Safety, http://www.yourlegalguide.com/defective-product-deaths/.
2 U.S. Consumer Product Safety Commission, www.cpsc.gov/about/about.html (accessed July 27, 2007).
3 John Cord, Product Liability Statistics & Trends, 2010. http://www.drugrecalllawyerblog.com /2010/01/product_liability_statistics_t.html.
Consequently, today’s businessperson is likely to become involved in some aspect of product liability litigation. This chapter discusses the most significant aspects of this area of law, known as product liability, to help the student function as a prudent consumer and businessperson.
Product liability law developed out of tort law, discussed in Chapter 10. This chapter begins by introducing the three primary theories of recovery in product liability cases and the defenses raised in such cases. These sections are followed by an introduction to enterprise liability, a concept that has slightly broadened the potential reach of product liability cases. Closely related to product liability is service liability, discussed in the next-to-last section. The final section discusses global implications of product liability law.Critical Thinking About The Law
Manufacturers owe a certain responsibility to consumers. Consumers should be able to reasonably use a product without its causing harm to them or others. After you read the following scenario, answer the critical thinking questions that will enhance your thinking about product liability law.
Katherine purchased a can of hair spray from her local drugstore. When she removed the cap from the hair spray can, the can exploded in her hands. She suffered third-degree burns on her hands and face and was unable to work for three months.
Katherine sued the hair spray manufacturer after she discovered that another woman had suffered an identical accident when using the same brand of hai ...
Chapter Twelve Product and Service Liability LawWhen consumers ent.docxbissacr
Chapter Twelve Product and Service Liability Law
When consumers enter a store to purchase a product, they assume that the product will do the job the manufacturer claims it will do without injuring anyone, and the consumer may not be aware that each year more than 33.4 million injuries and around 28,200 deaths result from the use of products purchased in the United States.1 Deaths, injuries, and property damage from consumer products incidents cost the nation more than $700 billion annually.2 Estimates of the number of resultant product liability cases range as high as 1 million a year. Also, the verdicts for defective-product or product liability cases are increasing from year to year. The total of the five largest awards for product defect cases in 2009 was 52 percent larger than the total in 2008. In fact, the largest award from a 2009 product defect case amounted to around $300 million, from the Philip Morris tobacco case. Also, in 2008, only 1 of the 50 largest awards were the result of a verdict in a product defect case, but in 2009, 5 of the 50 largest judgments were awarded in product defect cases.3
1 U.S. Department of Safety, http://www.yourlegalguide.com/defective-product-deaths/.
2 U.S. Consumer Product Safety Commission, www.cpsc.gov/about/about.html (accessed July 27, 2007).
3 John Cord, Product Liability Statistics & Trends, 2010. http://www.drugrecalllawyerblog.com /2010/01/product_liability_statistics_t.html.
Consequently, today’s businessperson is likely to become involved in some aspect of product liability litigation. This chapter discusses the most significant aspects of this area of law, known as product liability, to help the student function as a prudent consumer and businessperson.
Product liability law developed out of tort law, discussed in Chapter 10. This chapter begins by introducing the three primary theories of recovery in product liability cases and the defenses raised in such cases. These sections are followed by an introduction to enterprise liability, a concept that has slightly broadened the potential reach of product liability cases. Closely related to product liability is service liability, discussed in the next-to-last section. The final section discusses global implications of product liability law.Critical Thinking About The Law
Manufacturers owe a certain responsibility to consumers. Consumers should be able to reasonably use a product without its causing harm to them or others. After you read the following scenario, answer the critical thinking questions that will enhance your thinking about product liability law.
Katherine purchased a can of hair spray from her local drugstore. When she removed the cap from the hair spray can, the can exploded in her hands. She suffered third-degree burns on her hands and face and was unable to work for three months.
Katherine sued the hair spray manufacturer after she discovered that another woman had suffered an identical accident when using the same brand of hai.
Week 1 ContentSaylor Advanced Business Law and the Legal .docxcelenarouzie
Week 1 Content
Saylor: Advanced Business Law and the Legal Environment
· Introduction to Law and the Legal System
· Courts and the Legal Process
· Constitutional Law and Commerce
Saylor: The Legal and Ethical Environment of Business
· The Rule of Law
· Importance of Rule of Law to Business
Alternative Dispute Resolution (ADR)
The U.S. Constitution
State Court Listings by Jurisdiction
Week 2 Content
Saylor: Advanced Business Law and the Legal Environment
· Tort Law
Civil and Criminal Law Comparison
Elements of Negligence Summary
Premises liability
Introduction to Torts (video - 15 mins)
Week 3 Content
Review assigned materials in Week 2
Products Liability
Case Examples: Liriano v. Hobart Corp.; Daniell v Ford Motor Company; Klein v Pyrodyne Corp. (Links located below.)
Case Examples
Warranties and Products Liability
Liriano v. Hobart Corp. 92 N.Y.2d 232 (1998) Court of Appeals of the State of New York (failure to adequately warn, defective and negligent design)
Facts:
In 1961, Liriano, a 17 year-old employee in the meat department at Super Associated grocery store (Super), was injured on the job while feeding meat into a commercial meat grinder whose safety guard had been removed. His right hand and lower forearm were amputated.
The meat grinder was manufactured and sold by Hobart Corporation (Hobart) with an affixed safety guard that prevented the user's hands from coming into contact with the grinder. No warnings were on the machine or otherwise provided to state it was dangerous to operate the machine without the safety guard in place. Subsequently, Hobart became aware that a significant number of purchasers of its meat grinders had removed the safety guards; in 1962, Hobart began issuing warnings on its meat grinders concerning removal of the safety guard.
At trial, Super conceded the safety guard was intact at the time it acquired the grinder and that the guard was removed while in its possession. It is further conceded that Hobart actually knew, before the accident, that removals of this sort were occurring and that use of the machine without the safety guard was highly dangerous.
Liriano sued Hobart for negligence and strict product liability for defective product design and failure to warn. The case was removed to the United States District Court for the Southern District of New York, and Super was impleaded as a third-party defendant, seeking indemnification and/or contribution.
The District Court dismissed all of Liriano's claims except those based on failure to warn. The trial court ruled failure to warn was the proximate cause of Liriano's injuries and apportioned liability 5% to Hobart and 95% to Super. On partial retrial, Liriano was assigned 33 1/3% of the responsibility.
Hobart and Super appealed, arguing that they had no duty to warn, as a matter of law, and that the case should have been decided in their favor.
Opinion:
The appellate court agreed, essentially, with the rationale of the lower courts on the .
Introduction to Legal Risk Management and product liability. To read more about Legal Risk Management and product liability, visit http://seoullegalriskmgmt.com
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
RMD24 | Retail media: hoe zet je dit in als je geen AH of Unilever bent? Heid...BBPMedia1
Grote partijen zijn al een tijdje onderweg met retail media. Ondertussen worden in dit domein ook de kansen zichtbaar voor andere spelers in de markt. Maar met die kansen ontstaan ook vragen: Zelf retail media worden of erop adverteren? In welke fase van de funnel past het en hoe integreer je het in een mediaplan? Wat is nu precies het verschil met marketplaces en Programmatic ads? In dit half uur beslechten we de dilemma's en krijg je antwoorden op wanneer het voor jou tijd is om de volgende stap te zetten.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
3. Learning Objectives
Evolution of product liability law
Theories of product liability recovery:
Express warranty, implied warranties,
negligence, strict liability
Other theories of recovery
Time limitations, disclaimers, defenses
Damages
20 - 3
4. Development of
Product Liability Law
Product liability law refers to the body of
legal rules governing civil lawsuits for losses
and harms resulting from a defendant’s
furnishing of defective goods
Rule was caveat emptor (buyer beware), but
has shifted over the past century to caveat
venditor (let the seller beware) since sellers
are better able than consumers to bear the
costs of defective products
20 - 4
5. Product Liability Theories
Product liability law is partly grounded in
contract law and partly grounded in tort law
Contract theories are based on an express
or implied warranty
Tort theories are based on arguments of
negligence or strict liability
20 - 5
6. Express Warranty
UCC 2–313(1): express warranty may be
created in any of three ways:
If affirmation of fact or promise about
goods becomes part of the basis of the
bargain
Statements of value or opinion and sales
puffery do not constitute a warranty
Advertisements may contain statements of
warranty as well as sales puffery
20 - 6
7. Example of Express Warranty
Felley v. Singleton: Felley bought a used car
from the Singletons based on statement of
“good mechanical condition”
Car actually was in poor condition
Court: “In the context of a used car sale,
representations by the seller such as the car
is ‘in good mechanical condition’ are
presumed to be affirmations of fact that
become part of the basis of the bargain
20 - 7
8. Express Warranty
Two other express warranties:
A description of the goods that becomes
part of the bargain creates an express
warranty that the goods will conform to
description
A sample or model of goods to be sold
creates an express warranty that goods
will conform to sample
20 - 8
9. Implied Warranties
Implied warranties are created by operation
of law rather than seller’s express
statements
Warranty of merchantability [UCC 2-314(1)]
Seller must be a merchant in the goods of the
kind sold
Warranty of fitness for a particular
purpose [UCC section 2–315]
Seller must know the goods are to be used for
20 - 9
special purpose
10. Implied Warranty of
Merchantability
In implied warranty cases, plaintiff argues
that seller breached warranty by selling
unmerchantable goods and plaintiff should
recover damages
Privity of contract between consumer and
manufacturer is not required
Merchantability, essentially, is that goods
must be fit for the ordinary purposes for
which such goods are used
20 - 10
11. Meaning of Merchantability
Crowe v. CarMax Auto Superstores, Inc.:
Couple bought car from CarMax with express
warranties. Car required many repairs, all
covered by warranties, but couple sued CarMax
claiming unmerchantability
Court found for CarMax: goods need not be
perfect to be fit for their ordinary purposes, but
must only meet reasonable expectations of
average consumer
Couple had unreasonable expectations
20 - 11
12. Meaning of Merchantability
Newton v. Standard Candy Co.:
Demonstrates disagreement over standard for
food products alleged to be unmerchantable
because they contain harmful objects or
substances
Under foreign–natural test, defendant is liable if
object or substance is “foreign” to the product, but
not liable if it is “natural” to the product
But reasonable expectations test increasing in
use
20 - 12
13. Implied Warranty of Fitness for
a Particular Purpose
Warranty of fitness for a particular purpose
implied if: (1) seller has reason to know a
particular purpose for which buyer requires the
goods; (2) seller has reason to know that buyer
is relying on seller’s skill or judgment for the
selection of suitable goods; and (3) buyer
actually relies on seller’s skill or judgment in
purchasing the goods
See Moss v. Batesville Casket Co.
20 - 13
14. Negligence Theory
Product liability suits based on negligence
allege that seller or manufacturer breached a
duty to plaintiff by failing to eliminate a
reasonably foreseeable risk of harm:
(1) negligent manufacture of the goods (including
improper materials and packaging)
(2) negligent inspection
(3) negligent failure to provide adequate warnings
(4) negligent design
20 - 14
15. Croskey v. BMW of North
America, Inc.
Facts and Procedural History:
Croskey severely burned when plastic neck on car
radiator failed and spewed scalding radiator fluid
Croskey pleaded two theories: negligent design
and negligent failure to warn
Evidence of similar incidents existed, but court
excluded for negligent design claim
Jury returned verdict in favor of defendants
20 - 15
16. Croskey v. BMW of North
America, Inc.
Appellate Court:
Primary issue is design
defect, which requires
plaintiff to show that the
product was not reasonably
safe for its foreseeable uses
and a risk-utility analysis
favored a safer design
Trial court wrongly excluded
evidence of similar incidents
Reversed and remanded
20 - 16
17. Strict Liability Theory
American Law Institute published section
402A of Restatement (Second) of Torts
(1965)
Most important reason is socialization-of-risk
strategy: strict liability makes it easier for
plaintiffs to prove breach of duty and sellers pass
on costs in higher prices
Another reason: stimulates manufacturers to
design and build safer products
20 - 17
18. Restatement (Third) of Torts
Published in 1998, basic rule is: “One engaged in
the business of selling or otherwise distributing
products who sells or distributes a defective product
is subject to liability for harm to persons or property
caused by the defect.”
Three kinds of product defects: manufacturing
defects, inadequate warnings or instructions, design
defects
20 - 18
19. Strict Liability Cases
Simo v. Mitsubishi Motors North America, Inc.
Court court examined the legal requirements that
govern a strict liability case involving a claim of
defective design of an SUV, including proof of
reasonable alternative design
Wright v. Brooke Group Limited
Iowa Supreme Court announced that in design defect
cases, Iowa will follow the Restatement (Third)’s rule
rather than previously applied rules of strict liability and
negligence
20 - 19
20. Other
Product Liability Theories
Federal Magnuson-Moss Warranty Act
applies to sales of consumer products > $10
per item:
If written warranty, it must be full or limited
Full warranty promises to (1) remedy any defects
in the product and (2) replace product or refund
purchase price if, after reasonable number of
attempts, it cannot be repaired
Seller who gives a limited warranty is bound to
whatever promises it actually makes
20 - 20
21. Other
Product Liability Theories
A seller’s misrepresentation about a material
fact about the product — a fact that would
matter to a reasonable buyer – may invoke
liability to a buyer
Industrywide liability: plaintiffs bypass problems
of causation that exist where several firms within
an industry manufactured a harmful
standardized product, and plaintiff cannot prove
which firm produced the injurious product
20 - 21
22. Damages
Consequential damages: personal injury,
property damage, indirect economic loss
(e.g., lost profits or lost business reputation),
and noneconomic loss, such as pain and
suffering, physical impairment, mental
distress, loss of enjoyment of life, loss of
companionship or consortium,
inconvenience, and disfigurement
20 - 22
23. Damages
Basis-of-the-bargain damages:
Buyers of defective goods loss of full value for the
goods’ purchase price is a direct economic loss
(value of goods as promised under the contract
minus value of goods as received)
Punitive damages:
Intended to punish defendants who have acted in
an especially outrageous fashion, and to deter
them and others from so acting in the future
20 - 23
24. Disclaimers
Product liability disclaimer is a clause in the
sales contract whereby the seller attempts
to eliminate liability it might otherwise have
under the theories of recovery described
earlier in the chapter
20 - 24
25. Disclaimers & Limitations
Remedy limitation is a clause attempting to
block recovery of certain damages
Example of time limitation: “30 day warranty”
20 - 25
26. Defenses
Three main defenses in a
product liability suit are
the overlapping trio of
product misuse,
assumption of risk, and
contributory negligence
What could happen on a
construction site? What
defenses would exist?
20 - 26
27. Preemption and
Regulatory Compliance
Preemption defense rests on a federal
supremacy premise, that federal law
overrides state law when the two conflict
Riegel v. Medtronic, Inc.: state claims by plaintiffs
preempted by federal statute dealing with medical
devices
Courts mixed whether to treat regulatory
compliance as full defense or mere factor in
determining defendant’s liability
20 - 27
28. Test Your Knowledge
True=A, False = B
Implied warranties are created by seller’s
conduct rather than express statements
Merchantability, essentially, is that goods
must be fit for the ordinary purposes for which
such goods are used
A disclaimer is a clause in the sales contract
in which seller attempts to eliminate liability
seller might otherwise have under law
20 - 28
29. Test Your Knowledge
True=A, False = B
Under foreign–natural test, defendant is liable if
object or substance is “foreign” to product, but
not liable if it is “natural” to the product
Under the Restatement of Torts (Third), three
kinds of product defects exist: manufacturing
defects, inadequate warnings, design defects
The Magnuson-Moss Warranty Act requires
every written warranty to be a full warranty
20 - 29
30. Test Your Knowledge
Multiple Choice
Express warranty may be created by ________
that becomes part of the basis of the bargain for
the agreement:
(a) a statement of fact or promise about goods
(b) a description of the goods indicating goods
will conform to the description
(c) a sample or model of goods to be sold
indicating goods will conform to the sample
(d) all of the above
(e) both A and B, but not C
20 - 30
31. Test Your Knowledge
Multiple Choice
Drew was injured when his car rolled over
after the tires delaminated and caused him to
lose control. Drew could sue, claiming:
(a) negligence (design or manufacture)
(b) strict liability
(c) breach of warranty
(d) all of the above
20 - 31
32. Product Liability Statistics
Tort claims account for only 5% of the 19.7
million civil claims filed in state courts (Nat’l
Center for State Courts, 1992)
Products liability cases account for 4% of
all tort cases in state courts (Nat’l Center
for State Courts, 1992)
The number of lawsuits filed per capita has
remained relatively steady over the past
several decades
20 - 32
33. Product Liability Statistics
Business cases (financial damages) account
for 47% of all punitive damage awards
(Rand Institute for Civil Justice, 1996)
In contrast, only 4.4% and 2% of punitive
damage awards are due to product liability
and medical malpractice cases respectively
(Rand Institute for Civil Justice, 1996)
20 - 33
34. Thought Question
What is your opinion
of product liability
lawsuits? If you were
injured because of a
defect in a product,
would you file a
lawsuit against the
manufacturer?
20 - 34
Editor's Notes
Photo is of Henry Ford.
Lesson: any seller—professional or not—may make an express warranty. When such a warranty has been breached (because the goods were not as warranted), the plaintiff who demonstrates resulting losses is entitled to compensatory Damages.
Vertical privity between a consumer and manufacturer is no longer required as a condition to a claim by the consumer against the manufacturer for breach of the manufacturer’s implied warranty of merchantability. See Hyundai Motor America, Inc. v. Goodin.
In this case, all repairs covered by warranties (original express warranty plus purchased extended warranty) and many repairs justified due to wear and tear. Court found the couple had unreasonable expectations for a used car.
Standard Candy Co., a Tennessee firm, produces candy bars, including one known as the “Goo Goo Cluster.” The Goo Goo Cluster candy bar contains peanuts provided to Standard Candy by an outside supplier. When Nebraska resident James Newton II purchased a Goo Goo Cluster and bit into it, he encountered what he claimed to be an undeveloped peanut. Newton maintained that biting the undeveloped peanut caused him to experience a damaged tooth as well as recurring jaw-locking and hearing loss problems. Relying on diversity of citizenship jurisdiction, Newton filed a breach of implied warranty of merchantability lawsuit against Standard Candy in the U.S. District Court for the District of Nebraska. Standard Candy moved for summary judgment in its favor. Court: “The “foreign-natural” doctrine provides there is no liability if the food product is natural to the ingredients, whereas liability exists [for resulting injuries] if the substance is foreign to the ingredients…. Standard Candy argues that if Nebraska follows this doctrine, it is clearly not liable. Newton’s injuries were a result of a peanut, which is part of the ingredients found in a Goo Goo Cluster. Likewise, under the “reasonable expectation of the consumer” doctrine, Standard Candy argues that Newton cannot assert liability…. Standard Candy argues that under this test, Newton would [have been] reasonably aware of peanuts in a Goo Goo Cluster candy bar…. The court concludes that the motion for summary judgment must be denied. There are significant factual disputes that must be decided by the jury. The court also finds that Newton does not necessarily need an expert [on undeveloped peanuts] to prove his case. The testimony of Standard Candy’s employees, Sherry and Shraybman, [is] sufficient to establish the existence of both burnt and undeveloped peanuts. Mr. Sherry will be able to testify as to his knowledge regarding undeveloped peanuts based on his work observations. In addition, he might very well qualify as an expert in this regard. Additionally, Ms. Shraybman . . . will be permitted to testify . . . based on [her] experience working for Standard Candy.”
Court opinion regarding implied warranty of merchantability: “Batesville contends that the ordinary purpose of a wooden casket is to house the remains of the departed until interment…. [T]he record does not indicate that the plaintiffs ever stated a specified period of time that they, as reasonable customers, would have reasonably expected the wooden casket to last…. [Under the circumstances, the] trial court [appropriately] found that the ordinary purpose for which the casket was designed ceased once the pallbearers bore the casket from the hearse to the grave site for burial. [In any event,] [a]s previously stated, the record also fails to demonstrate that the remains were damaged in any way from the alleged cracks and separation when the casket and body were exhumed.” Court opinion regarding warranty of fitness for a particular purpose: “Here, the evidence did not justify the submission of this case to a jury on the [implied] warranty of fitness for a particular purpose [claim]. Nothing in the record provides that the plaintiffs identified any particular purpose to the defendants when the casket was selected. Furthermore, assuming arguendo that the plaintiffs sought to preserve their mother’s remains for some unspecified, indefinite period of time in the wooden casket, the record is completely devoid of any proof that the body had been damaged in any way by the alleged problems with the casket.”
William Croskey was seriously injured in July 2000 when his girlfriend’s 1992 BMW automobile overheated and he opened the hood to add fluid. Because the plastic neck on the car’s radiator failed, scalding radiator fluid spewed out and came in contact with Croskey, severely burning him. Relying on diversity of citizenship jurisdiction, Croskey filed suit in the U.S. District Court for the Eastern District of Michigan against the car’s manufacturer, Bayerische Motoren Werk Aktiengesellschaft (BMW AG), and the North American distributor of BMW vehicles, BMW of North America, Inc. (BMW NA). Croskey pleaded two alternative claims: (1) negligent design on the part of BMW AG; and (2) negligent failure to warn on the part of BMW AG and BMW NA. Deciding an evidentiary question prior to trial, the district court ruled that Croskey could use evidence of substantially similar incidents of plastic neck failure if those incidents came to the attention of the defendants and if the incidents occurred between 1991 and the date Croskey was injured. However, the court allowed this evidence to be used only in regard to the negligent failure to warn claim, and prohibited its use in regard to the negligent design claim. The court also ruled that concerning the negligent failure to warn claim, the defendants could introduce evidence of the number of BMWs sold with plastic-necked radiators between 1994 (when the defendants first learned of a neck failure) and the date of the Croskey incident. The purpose of such evidence was to show the likelihood—or lack of likelihood—of a neck failure. The case proceeded to trial. Rejecting Croskey’s negligent design and negligent failure to warn claims, the jury returned a verdict in favor of the defendants. Croskey appealed to the U.S. Court of Appeals for the Sixth Circuit.
Court: “A negligence claim in a product liability action looks to the [defendant’s] conduct and not the mere existence of a product’s defect to determine whether the [defendant’s] conduct was reasonable under the circumstances. [The plaintiff, Croskey,] claims that the defendants were negligent because they knew that the plastic used on the radiator “neck” could become brittle and break over time (the “defect”),…[and] that even if the defendants did not know the product was defective when it left [their] possession, [they] became aware later of the defect and were under a duty to warn consumers.” “ The primary issue in this appeal [centers around] the plaintiff ’s efforts to prove negligence under a theory of design defect. To prove a design defect under Michigan law, a plaintiff must show that the product was not reasonably safe for its foreseeable uses and that a risk-utility analysis favored a safer design. Under this approach, a plaintiff must show that (1) the product was not reasonably safe when it left the control of the manufacturer; and (2) a “feasible alternative production practice was available that would have prevented the harm without significantly impairing the usefulness or desirability of the product to users.” [Citations of authority omitted.] Plaintiffs may use both direct and circumstantial evidence to prove a design defect claim. A risk-utility balancing test [must be used]. …we hold it was error for the district court to make a blanket exclusion of all “other incidents” evidence by plaintiff to prove a negligence claim involving a design defect. …On retrial, the plaintiff will also be allowed to put on similar incidents evidence to prove his design defect claim.”
In 1998, the American Law Institute published its Restatement (Third) of Torts: Product Liability. Although many courts now discuss the new Restatement, it has not supplanted negligence and section 402A in most states as we write in 2005. The Restatement (Third), however, may signal the likely evolution of product liability law in the coming years.
Simo v Mitsubishi Motors North America, Inc .: Simo was a passenger in a 2000 Mitsubishi P45 Montero Sport, a sport-utility vehicle (SUV), The vehicle was designed, manufactured, and sold by Mitsubishi Motors Corp. and Mitsubishi Motors North America, Inc. Simo suffered severe injuries when the Montero Sport rolled over on an interstate highway in South Carolina, after the driver suddenly steered left to avoid another vehicle and then attempted to correct his course by quickly turning back to the right. While the vehicle was on its side, it was struck by a Federal Express truck. Simo filed a strict liability lawsuit in the U.S. District Court for the District of South Carolina against Mitsubishi Motors and Mitsubishi Motors North America, (collectively referred to here as “Mitsubishi”). Simo contended in his complaint that the Montero Sport was unreasonably dangerous because its center of gravity was too high, causing it to roll over in certain circumstances on flat, dry pavement (to roll over “untripped”). Mitsubishi moved for a directed verdict at the close of all of the evidence, but the district court denied the motion and allowed Simo’s strict liability claim to go to the jury. The jury returned a verdict in favor of Simo and awarded him $7 million in compensatory damages, an amount the district judge reduced to just over $6 million after giving Mitsubishi credit for amounts Simo received in settlement of claims against other parties. Mitsubishi appealed to the U.S. Court of Appeals for the Fourth Circuit. Appellate court: “a plaintiff must show [the following in order to win a strict liability claim]: (1) he was injured by the product; (2) the injury occurred because the product was in a defective condition, unreasonably dangerous to the user; and (3) the product at the time of the accident was in essentially the same condition as when it left the hands of the defendant. Proving the existence of an alternative feasible design is a crucial aspect of this required showing…. the district court correctly denied Mitsubishi’s motion [insofar as it was premised on a supposed failure of Simo to identify a reasonable alternative design]….. District court’s judgment in favor of Simo affirmed.” Wright v. Brooke Group Ltd.: Robert and DeAnn Wright sued various cigarette manufacturers in federal district court in an effort to obtain damages for harms allegedly resulting from Robert’s cigarette smoking. The plaintiffs made various claims, including negligence, strict liability, breach of implied warranty, breach of express warranty, fraudulent misrepresentation and nondisclosure, and civil conspiracy. The defendants’ motion to dismiss was largely overruled by the federal court. Thereafter, the defendants asked the federal court to certify questions of law to the Iowa Supreme Court, in accordance with Iowa Code § 684A.1 Concluding that the case presented potentially determinative state law questions as to which there was either no controlling precedent or ambiguous precedent, the federal court certified various questions to the Iowa Supreme Court. Two of the certified questions dealt with strict liability. They read as follows: “In a design defect products liability case, what test applies under Iowa law to determine whether cigarettes are unreasonably dangerous? What requirements must be met under the applicable test?” The Iowa Supreme Court issued an opinion answering the various questions certified by the federal court. The opinion concluded: “Iowa will follow the Restatement (Third) ’s rule rather than previously applied rules of strict liability and negligence.”
UCC section 2–316(2) makes it relatively easy for sellers to disclaim the implied warranties of merchantability and fitness for a particular purpose. Doctrine of unconscionability established by UCC section 2–302 may apply to limit disclaimers Magnuson- Moss Act also limits a seller’s ability to disclaim implied warranties.
Hyperlink is to the Supreme Court decision. The Medical Device Amendments of 1976 (MDA) created federal safety oversight scheme for medical devices and pushed back state oversight schemes. The most extensive oversight is reserved for Class III devices that undergo the premarket approval process. Class III devices may enter the market only if the FDA reviews their design, labeling, and manufacturing specifications and determines that the specifications provide a reasonable assurance of safety and effectiveness. Charles Riegel and his wife, petitioner Donna Riegel, brought suit against respondent Medtronic after a Medtronic catheter (a Class III device) ruptured in Charles Riegel’s coronary artery during heart surgery. The Riegels alleged that the device was designed, labeled, and manufactured in manner that violated New York state law. The District Court held that the MDA pre-empted the Riegels’ various claims, including strict liability, breach of implied warranty, and negligence. The trial court held in favor of Medtronic on the basis that the state law claims were preempted by the federal MDA. The Second Circuit affirmed in favor of Medtronic and the Supreme Court affirmed. A non-profit organization, Public Citizen, represented the plaintiffs on appeal and before the Supreme Court. The Food and Drug Administration (FDA) has the mandate to conduct the pre-market approval for devices under the MDA, but has no independent research capability. Consequently, the FDA sends the research results provided by the manufacturer to a panel of experts who advise the FDA in making its decision. In granting pre-market approval, the FDA does not make a finding that the device is factually safe and effective for its intended use, but only concludes that there is “reasonable assurance” that it is safe and effective.
False. Implied warranties are created by operation of law rather than seller’s express statements True. True.
True. True. False. Magnuson-Moss Warranty Act provides that i f warranty is written, it must be full or limited: Full warranty promises to (1) remedy any defects in the product and (2) replace product or refund purchase price if, after reasonable number of attempts, it cannot be repaired Seller who gives a limited warranty is bound to whatever promises it actually makes
The correct answer is (d).
The correct answer is (d).
Opportunity to discuss myths about torts and product liability, especially urban legends (see www.snopes.com) about lawsuits.
Again, these statistics have remained relatively stable for decades. Opportunity to discuss why these statistics reflect a commercial world more litigious than the media portrays.
If students claim they wouldn’t file suit, ask if they’d file suit if their child or parent was seriously injured. Opportunity to discuss the chapter opening case, Ernst v. Merck & Co., Inc. On August 19, 2005, a Texas jury found Merck & Co., Inc. liable for the death of Robert C. Ernst, who had taken the company's pain relief drug, Vioxx. The jury awarded Ernst's widow damages totaling $253.5 million, $24.5 million of which covered economic losses and mental anguish. Jurors arrived at a $229 million figure for punitive damages because that was how much money company executives estimated they would save by delaying a change in Vioxx's warning label. Under Texas state law, the punitive damages award was automatically reduced to $1.6 million. Interestingly, accordingly to Merck’s records, Merck made approximately $1.6 million in worldwide sales from Vioxx every 6 hours and 40 minutes the drug was on the market. Juror comments from the Ernst case are illustrative: “‘ Merck did not let us know the full problems of the drug,’ juror Rhonda Wade said. ‘I was shocked.’” [The Dallas Morning News, 8/20/05] Juror Stacy Smith: “The issue, to me, was, did Merck know before they put the drug on the market, and when they did, why didn't they do something about it immediately?” [World News Tonight, ABC News Transcripts, 8/19/05] A press release on Merck’s website after the Ernst v. Merck verdict is also illustrative: “WHITEHOUSE STATION, N.J., Aug. 20, 2005 - Friday’s verdict in Texas was a disappointment to all of us at Merck because we know we acted responsibly. Merck is driven by science and our commitment to acting in the best interest of patients.” Compare that press release to one almost one year earlier: “WHITEHOUSE STATION, N.J., Sept. 30, 2004 Merck & Co., Inc. today announced a voluntary worldwide withdrawal of VIOXX® (rofecoxib), its arthritis and acute pain medication. The company’s decision, which is effective immediately, is based on new, three-year data…’We are taking this action because we believe it best serves the interests of patients,’ said Raymond V. Gilmartin, chairman, president and chief executive officer of Merck.”