2. Table of content
1. TATA xenon
2. Important Technical Information
2.1 Vehicle Dimensions
2.2 Vehicle other specification
3. Why Vehicle Servicing is Done
4. Service Operation Should be Done by Customer
5. Engine compartment
6. Oil Filling And Drain Points
7. Different oil Filling Capacity and Its grade
8. Maintenance Service schedule
9. Schedule Servicing cost
2
6. 3.Why Vehicle Servicing is Done
• It keeps engine health
• Maintains the performance of vehicle
• Decrease downtime of vehicle
• It keeps you safe
• Tires(pressure and wear pattern)
• It protects the car’s value
• Down maintenance cost
• Maintains the warranty of vehicle
Tire wear pattern
6
7. 4.Service Operation Should be Done by Customer
S
.
N
Operation Frequency
1 Check engine oil level in sump, Top up, if necessary Weekly
2 Check coolant level in auxiliary tank, Top up, If necessary Weekly
3 Check oil level in power steering , brake, and clutch tank & top up if necessary weekly
4 Check tire pressure , tire wear, and inflate tire in specified pressure: if necessary Daily
5 Grease with grease gun : (Where grease nipple is provided). Tie rod ball joints, Drag link ball joints, Idler arm
ball joints and Centre link ball joints. Rear spring pins. 5000 km / Monthly Propeller shaft sliding yoke.
1 month
6 Check Air Filter service indicator. If RED BAND appears, clean the air filter. If ‘RED BAND’ As and when
reappears even after cleaning, get the air filter element replaced.
Weekly
7 Tire rotation 20000 km , and wheel balancing (Whenever a tyre is removed from wheel rim),
Wash the vehicle & clean the condenser with compressed air
As required
7