This document provides guidance for developing service standards. It outlines key elements to consider in the pre-normative phase such as defining the service, reasons for standardization, and external influences. It also describes potential contents for a service standard such as requirements addressing the service lifecycle, management systems, and measurement of service quality. Standards can be developed as European Standards, Technical Specifications, Technical Reports, or Workshop Agreements depending on the purpose and level.
The document describes Directed Retry Decision (DRD) functionality in 3G networks. DRD allows the network to direct a UE to retry network access on a different cell if the currently attached cell no longer provides optimal radio conditions or service. The document outlines the different types of DRD, including RRC DRD, non-periodic DRD, and periodic DRD. It also describes various DRD procedures and parameters related to inter-frequency handover, load balancing, service steering, and inter-RAT handover.
This document contains a final regulation from the Department of Labor requiring certain service providers to pension plans to disclose information about their compensation and potential conflicts of interest. The regulation establishes disclosure requirements as part of a statutory exemption from ERISA's prohibited transaction provisions. The final rule retains the basic structure of previous proposals and interim rules by mandating that covered service providers satisfy disclosure requirements in order to qualify for the exemption. Key provisions of the final rule include requiring disclosure of direct and indirect compensation received by service providers, as well as modifications to conform investment-related disclosures with a separate participant-level disclosure regulation.
This document provides a code of practice for facilities management during the design and construction process. It aims to promote early involvement of facility managers to ensure the design considers expected operational performance over the asset's lifespan. The document outlines activities, questions and deliverables to support the design and construction team in providing assurance on the asset's required operational performance. It emphasizes adopting a whole-life view and extending team involvement through handover and defined aftercare periods.
This document provides a revised template for Service Level Agreements (SLAs) and new Operational Level Agreements (OLAs) used by the European Middleware Initiative (EMI) project. The template defines EMI's service scope and responsibilities, as well as customer and contributor responsibilities. It has been used to establish a formal SLA with the European Grid Infrastructure and is analyzed based on the results of applying it over the past year. The document also introduces OLAs to manage relationships with EMI contributors as part of EMI's "Works with EMI" program.
The document summarizes guidance from the Climate Disclosure Standards Board (CDSB) on how to link climate change-related reporting using their framework with questions from the CDP climate change questionnaire. It provides a table that maps disclosure requirements from the CDSB framework to corresponding questions in the CDP questionnaire to help companies integrate climate reporting into mainstream financial reports. It also provides background context on CDSB's framework and its goal of connecting non-financial issues like climate change to financial performance.
This document provides a code of practice for facilities management during the design and construction of buildings and infrastructure. It aims to improve focus on operational performance by extending involvement of operators and facility managers. The standard covers work stages from briefing to aftercare and emphasizes adopting a whole-life view. It also references principles of Building Information Modeling (BIM) and soft landings to facilitate smooth transition to operations.
The presentation provides an overview of the new ISO/IEC 17024 standard for certification of persons. It discusses the goals of revising the standard, including clarifying areas, incorporating guidance, and standardizing the format. Major changes in the new standard include more detailed requirements for impartiality management, certification body structure related to training, personnel requirements, records management, security, certification schemes, and the certification process. The presentation reviews the timeline of the revision process and issues addressed during the working group meetings.
The document describes Directed Retry Decision (DRD) functionality in 3G networks. DRD allows the network to direct a UE to retry network access on a different cell if the currently attached cell no longer provides optimal radio conditions or service. The document outlines the different types of DRD, including RRC DRD, non-periodic DRD, and periodic DRD. It also describes various DRD procedures and parameters related to inter-frequency handover, load balancing, service steering, and inter-RAT handover.
This document contains a final regulation from the Department of Labor requiring certain service providers to pension plans to disclose information about their compensation and potential conflicts of interest. The regulation establishes disclosure requirements as part of a statutory exemption from ERISA's prohibited transaction provisions. The final rule retains the basic structure of previous proposals and interim rules by mandating that covered service providers satisfy disclosure requirements in order to qualify for the exemption. Key provisions of the final rule include requiring disclosure of direct and indirect compensation received by service providers, as well as modifications to conform investment-related disclosures with a separate participant-level disclosure regulation.
This document provides a code of practice for facilities management during the design and construction process. It aims to promote early involvement of facility managers to ensure the design considers expected operational performance over the asset's lifespan. The document outlines activities, questions and deliverables to support the design and construction team in providing assurance on the asset's required operational performance. It emphasizes adopting a whole-life view and extending team involvement through handover and defined aftercare periods.
This document provides a revised template for Service Level Agreements (SLAs) and new Operational Level Agreements (OLAs) used by the European Middleware Initiative (EMI) project. The template defines EMI's service scope and responsibilities, as well as customer and contributor responsibilities. It has been used to establish a formal SLA with the European Grid Infrastructure and is analyzed based on the results of applying it over the past year. The document also introduces OLAs to manage relationships with EMI contributors as part of EMI's "Works with EMI" program.
The document summarizes guidance from the Climate Disclosure Standards Board (CDSB) on how to link climate change-related reporting using their framework with questions from the CDP climate change questionnaire. It provides a table that maps disclosure requirements from the CDSB framework to corresponding questions in the CDP questionnaire to help companies integrate climate reporting into mainstream financial reports. It also provides background context on CDSB's framework and its goal of connecting non-financial issues like climate change to financial performance.
This document provides a code of practice for facilities management during the design and construction of buildings and infrastructure. It aims to improve focus on operational performance by extending involvement of operators and facility managers. The standard covers work stages from briefing to aftercare and emphasizes adopting a whole-life view. It also references principles of Building Information Modeling (BIM) and soft landings to facilitate smooth transition to operations.
The presentation provides an overview of the new ISO/IEC 17024 standard for certification of persons. It discusses the goals of revising the standard, including clarifying areas, incorporating guidance, and standardizing the format. Major changes in the new standard include more detailed requirements for impartiality management, certification body structure related to training, personnel requirements, records management, security, certification schemes, and the certification process. The presentation reviews the timeline of the revision process and issues addressed during the working group meetings.
This document provides a template for a Service Level Agreement (SLA) between EMI and its customers. It describes the purpose and structure of the SLA template, as well as key concepts around SLA-based service provision. The template covers areas such as service scope, stakeholders, terms, service management, security, liability, and signatures. It is intended to serve as the basis for negotiating specific SLAs with customers such as EGI and PRACE. The document and template will be reviewed annually and when major changes occur.
This document provides guidelines for preparing standard bills of quantities for road projects in Abu Dhabi, UAE. It is divided into five chapters, with Chapter 5 focusing on work classification sections for the bill of quantities. These sections include lists of principal quantities, preambles, daywork schedules, work items divided into various parts, grand summaries, and schedules of rate breakdowns. The document aims to standardize bills of quantities based on the Civil Engineering Standard Method of Measurement to improve cost estimating precision and ensure consistent tender pricing.
PECB Webinar: Winning approach towards successful ISO/IEC 20000 CertificationPECB
The webinar covers:
• Brief overview of the Standard content
• The different parts in ISO/IEC 20000
• Critical important terms/concepts in ISO/IEC 20000 to prepare and position your ISO/IEC 20000 certification
• How to define your certification Scope
• How best to proceed to prepare for meeting the requirements of the standard
Presenter:
This session was presented by Steve Tremblay, Senior ITSM Consultant, Trainer at ExcelsaTech, and a PECB Certified Trainer.
Link of the recorded session published on YouTube: https://youtu.be/UR5npVBYjWA
Identifying rebound effects in product-service systems: actors, mechanisms, t...Daniel Guzzo
Paper title: Identifying rebound effects in product-service systems: actors, mechanisms, triggers and drivers
Authors: Daniel Guzzo, Daniela C.A. Pigosso
Abstract:
The implementation of product-service systems (PSS) is prone to the occurrence of rebound effects (RE). This research aims to systematically identify the rebound mechanisms in a PSS context. Through the case study of a use-oriented PSS offer, we showcase a structured way to address RE that led to a comprehensive mapping of 23 mechanisms. The analysis demonstrates an approach to mapping rebound triggers, drivers, and mechanisms within the actors’ realms that designers can apply to ensure the potential sustainability gains of PSS offers.
DESIGN 2024 Conference presentation
This document provides a summary of a British Standard that outlines recommendations for briefing for design and construction of infrastructure assets to ensure their expected operational performance over their planned lifespan. It covers terms, definitions, and abbreviations. The standard is intended to complement existing briefing practices by promoting early involvement of operations teams and extending delivery team involvement through aftercare. It outlines activities, information, questions, and deliverables to provide certainty regarding operational performance to owners and operators.
Mapping Between The Recommendations Of The Expert Group Of The Commission And...Friso de Jong
This document maps recommendations from an Expert Group of the European Commission regarding electronic invoicing to standards and guidelines developed by CEN Workshop on eInvoicing. It finds that while CEN and the Expert Group addressed many of the same issues, their approaches and specific recommendations sometimes differed. The document analyses alignments and differences across topics like the definition of EDI, model agreements, invoice formats, and the role of a proposed new multi-stakeholder forum. It suggests some Expert Group recommendations could inform future CEN Workshop phase 3 and 4 deliverables. In general, it finds opportunities for CEN and the Expert Group to continue converging their guidance to facilitate electronic invoicing interoperability in Europe.
This chapter introduces international standards, best practices, and maintenance management models that can be used as references in developing a framework for network utility maintenance. It discusses process-oriented standards from organizations like ISO, ITIL, and CMMI. It also covers standards for systems interoperability from sectors like industrial automation and telecommunications, focusing on integrating operation and maintenance systems across the asset lifecycle. The goal is to facilitate knowledge transfer and information exchange between hierarchical and intra-hierarchical systems through the use of open interoperability standards.
Here are the proposed maximum load and no-load losses requirements for very compact three-phase oil-immersed distribution transformers (≤100 kVA):
Table 7-2: Proposed maximum load and no-load losses for smaller LV/LV 50 Hz transformers.
Rating (kVA)
Maximum No-Load Losses (W)
Maximum Load Losses (W)
50 100
150 250 450
The proposed requirements aim to achieve a good balance between losses reduction potential and technical feasibility for this compact product category. More stringent requirements could hamper functionality.
Stakeholders are invited to comment on these proposed requirements. Alternative proposals are welcome.
7.1.2.
UN/CEFACT standard (BRS)
"Integrated Track and Trace for Multi-Modal Transportation".
Uploaded temporarily because it is currently no longer accessible via the official unece.org website.
Solvency ii Association
http://www.solvency-ii-association.com
We are pleased to announce our updated Distance Learning and Online Certification programs:
1. Certified Solvency ii Professional (CSiiP) Distance Learning and Online Certification Program
http://www.solvency-ii-association.com/CSiiP_Distance_Learning_Online_Certification_Program.htm
2. Certified Solvency ii Equivalence Professional (CSiiEP) Distance Learning and Online Certification Program
http://www.solvency-ii-association.com/CSiiEP_Distance_Learning_Online_Certification_Program.htm
Register to receive Solvency II / Omnibus II related alerts, opportunities, updates, our monthly newsletter and limited time offers for our Solvency II / Omnibus II Training and Certification programs:
http://forms.aweber.com/form/28/1910009328.htm
Stork Deliverable D7.3 List Of Commission A2 A Services Of Common InterestFriso de Jong
STORK is a large scale pilot in the ICT-PSP (ICT Policy Support Programme), under the CIP (Competitiveness and Innovation Programme), and co-funded by EU. It aims at implementing an EU wide interoperable system for recognition of eID and authentication that will enable businesses, citizens and government employees to use their national electronic identities in any Member State. It will also pilot transborder eGovernment identity services and learn from practice on how to roll out such services, and to experience what benefits and challenges an EU wide interoperability system for recognition of eID will bring.
The STORK consortium would like to announce that the approved STORK deliverables have now been released for public view and uploaded to the STORK website under the STORK Materials section.
The document provides guidance for planning building services activities within a construction project. It describes the processes involved in engineering, construction, and testing & commissioning of various building service disciplines such as mechanical, electrical, plumbing, and fire fighting systems. The manual is organized into 12 sections that provide information on activity breakdown structures, activity flow diagrams, relationships between building services and civil activities, installation guides, material procurement, and equipment information to assist planning and program managers.
The document provides a template for Service Level Agreements (SLAs) between service providers like OIT and MCIS and their customers. It includes sections for executive summaries, general overviews, terms and conditions, supported services and charges, party responsibilities, service measures and reporting, customer requests, and procedures for customer incidents. The template is meant to clearly define the services provided and set guidelines for negotiation between parties.
This document provides technical specifications for assessing the impact of the proposed EU long-term guarantees measures package. It outlines the scenarios to be tested, including different risk-free interest rate term structures and matching adjustment approaches. The assessment will evaluate the impact on policyholder protection, supervision, implementation costs, risk management incentives, and financial stability. Insurance companies will provide quantitative input to assess the effects of the measures on solvency positions and competition. The specifications supplement previously published details and focus on the quantitative industry data collection.
This document outlines the requirements, evaluation criteria, and submission templates for candidate radio interface technologies and sets of technologies to be considered for IMT-Advanced standards. It describes the services, spectrum, and technical performance requirements, and provides evaluation guidelines and templates that proponents must use to submit technology proposals. A complete submission includes completed templates describing the technology, an initial self-evaluation of how the technology meets the requirements, and an indication of which requirements and evaluation criteria versions apply. Technologies will be accepted if they meet requirements in at least 3 of 4 test environments.
This design document describes the proposed architecture for the CLup project. It outlines a three-layer architecture with a presentation layer (mobile and web apps), application layer (business logic), and data layer. It includes UML diagrams showing the component view, deployment view, and runtime view. The document also covers user interface design guidelines, requirements traceability to ensure the architecture meets requirements, and an implementation, integration and testing plan.
This document provides an overview of systems engineering standards and processes. It discusses ISO/IEC/IEEE 15288, which provides a framework for managing systems throughout the lifecycle. The standard defines technical and technical management processes. It also discusses the Systems Engineering Body of Knowledge (SEBoK) and the INCOSE Systems Engineering Handbook, both of which are based on ISO/IEC/IEEE 15288. The document recommends following a systems engineering approach to aircraft development to help ensure safety and optimize costs over the lifecycle. It emphasizes integrating safety assessments into systems engineering processes from an early stage.
USE OF ETAGs AS EADs FOR EUROPEAN TECHNICAL ASSESSMENTs
The concept “fitness for use” disappeared from the CPR
In general, the ETAG technical information is applicable but information linked to the CPD clauses and terms is not
Conditions, a part from those influencing the performance(s) of the product(s), or recommendations can not be included in the ETA (EC)
Threshold values as such can only be used if agreed to with EC
The ETA is the base to be used by the manufacturer for preparing the DoP
Responsibilities, role, tasks or information already stated in the legal bases must not be repeated (EC)
Este documento regulamenta o uso medicinal de medicamentos, preparações e substâncias à base da planta da canábis em Portugal de acordo com a Lei n.o 33/2018. Estabelece requisitos para cultivo, fabrico, importação e exportação destes produtos e especifica boas práticas a serem seguidas. Também ajusta o regime existente para substâncias controladas para permitir a operacionalização da lei.
This document provides a template for a Service Level Agreement (SLA) between EMI and its customers. It describes the purpose and structure of the SLA template, as well as key concepts around SLA-based service provision. The template covers areas such as service scope, stakeholders, terms, service management, security, liability, and signatures. It is intended to serve as the basis for negotiating specific SLAs with customers such as EGI and PRACE. The document and template will be reviewed annually and when major changes occur.
This document provides guidelines for preparing standard bills of quantities for road projects in Abu Dhabi, UAE. It is divided into five chapters, with Chapter 5 focusing on work classification sections for the bill of quantities. These sections include lists of principal quantities, preambles, daywork schedules, work items divided into various parts, grand summaries, and schedules of rate breakdowns. The document aims to standardize bills of quantities based on the Civil Engineering Standard Method of Measurement to improve cost estimating precision and ensure consistent tender pricing.
PECB Webinar: Winning approach towards successful ISO/IEC 20000 CertificationPECB
The webinar covers:
• Brief overview of the Standard content
• The different parts in ISO/IEC 20000
• Critical important terms/concepts in ISO/IEC 20000 to prepare and position your ISO/IEC 20000 certification
• How to define your certification Scope
• How best to proceed to prepare for meeting the requirements of the standard
Presenter:
This session was presented by Steve Tremblay, Senior ITSM Consultant, Trainer at ExcelsaTech, and a PECB Certified Trainer.
Link of the recorded session published on YouTube: https://youtu.be/UR5npVBYjWA
Identifying rebound effects in product-service systems: actors, mechanisms, t...Daniel Guzzo
Paper title: Identifying rebound effects in product-service systems: actors, mechanisms, triggers and drivers
Authors: Daniel Guzzo, Daniela C.A. Pigosso
Abstract:
The implementation of product-service systems (PSS) is prone to the occurrence of rebound effects (RE). This research aims to systematically identify the rebound mechanisms in a PSS context. Through the case study of a use-oriented PSS offer, we showcase a structured way to address RE that led to a comprehensive mapping of 23 mechanisms. The analysis demonstrates an approach to mapping rebound triggers, drivers, and mechanisms within the actors’ realms that designers can apply to ensure the potential sustainability gains of PSS offers.
DESIGN 2024 Conference presentation
This document provides a summary of a British Standard that outlines recommendations for briefing for design and construction of infrastructure assets to ensure their expected operational performance over their planned lifespan. It covers terms, definitions, and abbreviations. The standard is intended to complement existing briefing practices by promoting early involvement of operations teams and extending delivery team involvement through aftercare. It outlines activities, information, questions, and deliverables to provide certainty regarding operational performance to owners and operators.
Mapping Between The Recommendations Of The Expert Group Of The Commission And...Friso de Jong
This document maps recommendations from an Expert Group of the European Commission regarding electronic invoicing to standards and guidelines developed by CEN Workshop on eInvoicing. It finds that while CEN and the Expert Group addressed many of the same issues, their approaches and specific recommendations sometimes differed. The document analyses alignments and differences across topics like the definition of EDI, model agreements, invoice formats, and the role of a proposed new multi-stakeholder forum. It suggests some Expert Group recommendations could inform future CEN Workshop phase 3 and 4 deliverables. In general, it finds opportunities for CEN and the Expert Group to continue converging their guidance to facilitate electronic invoicing interoperability in Europe.
This chapter introduces international standards, best practices, and maintenance management models that can be used as references in developing a framework for network utility maintenance. It discusses process-oriented standards from organizations like ISO, ITIL, and CMMI. It also covers standards for systems interoperability from sectors like industrial automation and telecommunications, focusing on integrating operation and maintenance systems across the asset lifecycle. The goal is to facilitate knowledge transfer and information exchange between hierarchical and intra-hierarchical systems through the use of open interoperability standards.
Here are the proposed maximum load and no-load losses requirements for very compact three-phase oil-immersed distribution transformers (≤100 kVA):
Table 7-2: Proposed maximum load and no-load losses for smaller LV/LV 50 Hz transformers.
Rating (kVA)
Maximum No-Load Losses (W)
Maximum Load Losses (W)
50 100
150 250 450
The proposed requirements aim to achieve a good balance between losses reduction potential and technical feasibility for this compact product category. More stringent requirements could hamper functionality.
Stakeholders are invited to comment on these proposed requirements. Alternative proposals are welcome.
7.1.2.
UN/CEFACT standard (BRS)
"Integrated Track and Trace for Multi-Modal Transportation".
Uploaded temporarily because it is currently no longer accessible via the official unece.org website.
Solvency ii Association
http://www.solvency-ii-association.com
We are pleased to announce our updated Distance Learning and Online Certification programs:
1. Certified Solvency ii Professional (CSiiP) Distance Learning and Online Certification Program
http://www.solvency-ii-association.com/CSiiP_Distance_Learning_Online_Certification_Program.htm
2. Certified Solvency ii Equivalence Professional (CSiiEP) Distance Learning and Online Certification Program
http://www.solvency-ii-association.com/CSiiEP_Distance_Learning_Online_Certification_Program.htm
Register to receive Solvency II / Omnibus II related alerts, opportunities, updates, our monthly newsletter and limited time offers for our Solvency II / Omnibus II Training and Certification programs:
http://forms.aweber.com/form/28/1910009328.htm
Stork Deliverable D7.3 List Of Commission A2 A Services Of Common InterestFriso de Jong
STORK is a large scale pilot in the ICT-PSP (ICT Policy Support Programme), under the CIP (Competitiveness and Innovation Programme), and co-funded by EU. It aims at implementing an EU wide interoperable system for recognition of eID and authentication that will enable businesses, citizens and government employees to use their national electronic identities in any Member State. It will also pilot transborder eGovernment identity services and learn from practice on how to roll out such services, and to experience what benefits and challenges an EU wide interoperability system for recognition of eID will bring.
The STORK consortium would like to announce that the approved STORK deliverables have now been released for public view and uploaded to the STORK website under the STORK Materials section.
The document provides guidance for planning building services activities within a construction project. It describes the processes involved in engineering, construction, and testing & commissioning of various building service disciplines such as mechanical, electrical, plumbing, and fire fighting systems. The manual is organized into 12 sections that provide information on activity breakdown structures, activity flow diagrams, relationships between building services and civil activities, installation guides, material procurement, and equipment information to assist planning and program managers.
The document provides a template for Service Level Agreements (SLAs) between service providers like OIT and MCIS and their customers. It includes sections for executive summaries, general overviews, terms and conditions, supported services and charges, party responsibilities, service measures and reporting, customer requests, and procedures for customer incidents. The template is meant to clearly define the services provided and set guidelines for negotiation between parties.
This document provides technical specifications for assessing the impact of the proposed EU long-term guarantees measures package. It outlines the scenarios to be tested, including different risk-free interest rate term structures and matching adjustment approaches. The assessment will evaluate the impact on policyholder protection, supervision, implementation costs, risk management incentives, and financial stability. Insurance companies will provide quantitative input to assess the effects of the measures on solvency positions and competition. The specifications supplement previously published details and focus on the quantitative industry data collection.
This document outlines the requirements, evaluation criteria, and submission templates for candidate radio interface technologies and sets of technologies to be considered for IMT-Advanced standards. It describes the services, spectrum, and technical performance requirements, and provides evaluation guidelines and templates that proponents must use to submit technology proposals. A complete submission includes completed templates describing the technology, an initial self-evaluation of how the technology meets the requirements, and an indication of which requirements and evaluation criteria versions apply. Technologies will be accepted if they meet requirements in at least 3 of 4 test environments.
This design document describes the proposed architecture for the CLup project. It outlines a three-layer architecture with a presentation layer (mobile and web apps), application layer (business logic), and data layer. It includes UML diagrams showing the component view, deployment view, and runtime view. The document also covers user interface design guidelines, requirements traceability to ensure the architecture meets requirements, and an implementation, integration and testing plan.
This document provides an overview of systems engineering standards and processes. It discusses ISO/IEC/IEEE 15288, which provides a framework for managing systems throughout the lifecycle. The standard defines technical and technical management processes. It also discusses the Systems Engineering Body of Knowledge (SEBoK) and the INCOSE Systems Engineering Handbook, both of which are based on ISO/IEC/IEEE 15288. The document recommends following a systems engineering approach to aircraft development to help ensure safety and optimize costs over the lifecycle. It emphasizes integrating safety assessments into systems engineering processes from an early stage.
USE OF ETAGs AS EADs FOR EUROPEAN TECHNICAL ASSESSMENTs
The concept “fitness for use” disappeared from the CPR
In general, the ETAG technical information is applicable but information linked to the CPD clauses and terms is not
Conditions, a part from those influencing the performance(s) of the product(s), or recommendations can not be included in the ETA (EC)
Threshold values as such can only be used if agreed to with EC
The ETA is the base to be used by the manufacturer for preparing the DoP
Responsibilities, role, tasks or information already stated in the legal bases must not be repeated (EC)
Este documento regulamenta o uso medicinal de medicamentos, preparações e substâncias à base da planta da canábis em Portugal de acordo com a Lei n.o 33/2018. Estabelece requisitos para cultivo, fabrico, importação e exportação destes produtos e especifica boas práticas a serem seguidas. Também ajusta o regime existente para substâncias controladas para permitir a operacionalização da lei.
This document outlines requirements for certification bodies that certify products, processes, and services. It covers general requirements such as legal responsibilities, impartiality, confidentiality, and structuring of the certification body. It also specifies requirements for certification body personnel, resources, processes for application review, evaluation, certification decisions, surveillance activities, and management systems. Conformity with these requirements is necessary for bodies certifying products, processes, or services. The document aims to ensure certifications are issued on an impartial and consistent basis by competent certification bodies.
1. A dissertação analisa os processos de negócio e implementação de um sistema ERP (SAP R/3) na Alcan Packaging Porto para melhorar a gestão dos processos.
2. Foram desenvolvidos projetos para reduzir desperdícios, uniformizar larguras de produto e integrar melhorias nos processos no SAP.
3. A implementação do SAP e melhoria dos processos permitiu otimizar o planeamento da produção, gestão de stocks e fornecedores na Alcan Packaging Porto.
O documento discute a modelagem de processos de negócio, especificamente a modelagem AS-IS. Ele descreve as etapas da modelagem AS-IS, incluindo entendimento do processo, levantamento de informações, modelagem e validação. Também define os papéis na modelagem e fornece detalhes sobre como representar elementos de processo usando notação BPMN.
This document outlines additions and changes to ISO 9001:2008 quality management system standards for the automotive industry as specified in ISO/TS 16949:2009. Key changes include additional terms and definitions relevant to the automotive industry, expanded requirements for design and development processes, additional controls for purchasing and production processes, enhanced monitoring and measurement of processes and products, and expanded requirements for continual improvement.
This document summarizes a research paper that proposes using business process models and lifecycle management to provide context and improve the development and use of message standards for systems integration. Key points:
- Message standards are increasingly complex, making them difficult to use for specific integration cases. Context is needed to define how standards should be adapted and applied.
- The researchers developed tools called MSSRT and BPCCS that use business process models and lifecycle management to provide context definitions for message standards.
- BPCCS classifies and catalogs business process models using classification schemes to define contexts. MSSRT then applies these contexts to generate customized message standard profiles for specific integration cases.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...Aleksey Savkin
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
2. CEN GUIDE 15:2012 (E)
2
Index Page
Foreword..............................................................................................................................................................3
Introduction.........................................................................................................................................................3
1 Scope ......................................................................................................................................................4
2 Terms and definitions ...........................................................................................................................4
3 Pre-normative phase .............................................................................................................................6
4 Potential content of a service standard ..............................................................................................9
5 Interface with legal requirements...................................................................................................... 13
6 Interface with management systems................................................................................................ 14
7 Addressing other horizontal issues.................................................................................................. 17
8 Measurement of service quality ........................................................................................................ 20
Annex A (informative) The service lifecycle model..................................................................................... 23
Annex B (informative) Service Environmental checklist............................................................................ 24
Bibliography..................................................................................................................................................... 25
3. CEN GUIDE 15:2012 (E)
3
Foreword
This document (CEN Guide 15:2012) has been prepared by CEN/BT WG 163 “Standardization in the field of
services”.
Draft Guides adopted by the responsible Committee or Group are circulated to the member bodies of CEN for
voting.
Publication as a Guide by CEN requires approval by simple majority of the national bodies casting a vote.
This document has been drafted in accordance with the rules given in the CEN-CENELEC Internal
Regulations, Part 3 [1].
Introduction
Standardisation is increasingly being used to support the development of the market for services. The role of
standardisation in the creation of an Internal Market for services in Europe has been recognised by the
Directive on Services [2]. The Directive encourages the development of European standards in order to
improve compatibility between services, information to the recipient and quality of service provision.
This Guide provides support and guidance to all socio-economic actors and not only standardisation
professionals, of any service sector or subsector, whether B2B (2.3), B2G (2.5), B2C (2.4) or G2P (2.10),
whether sector specific or generic, in the process of drafting a standard or revising an existing one, about a
certain activity, irrespectively of the reasons to do so or in the pre-normative stage (preparation of the
proposal).
The methodology provided facilitates the identification of potential contents to be included in a service
standard (2.14). In addition, it considers essential aspects such as structure, interface with management
system (2.12) standards and legislation, or measuring customer (2.8) satisfaction.
A bibliography lists useful documents giving guidance on horizontal aspects and rules that apply to the
process of standardisation.
Searching for service standards, both in the ISO and CEN systems, many documents in the field of services
will appear that are not service standards but other containing information such as terminology, training,
maintenance, application of management systems to the service activity or other of interest and value for the
sector but that do not describe service provision. This Guide is conceived to support the development or
revision of standards describing the service provision or parts of it, in the first place without detriment of other
uses, if of help.
In developing this Guide, ISO/IEC Guide 76 [3] has been thoroughly considered and its background
knowledge integrated as much as possible.
4. CEN GUIDE 15:2012 (E)
4
1 Scope
This Guide [see 3.6, e)] provides a methodology for developing generic or sector specific standards in the field
of services, taking into account the needs and requirements of stakeholders, including consumers (2.7).
This Guide is designed to support all those interested in or involved with developing standards in the area of
services, whether public or private sector, business to business (2.3), business to government (2.5), business
to consumer (2.4) or government to the public (2.10), irrespective of their activity sector or sub-sector.
This Guide helps identify in a systematic way topics that each service sector may like to consider for their
inclusion in the standard and also helps organise such information.
This Guide also clarifies the interface of service standards with management systems (2.12) or legal
requirements and tackles other relevant aspects.
2 Terms and definitions
2.1
A-deviation
national deviation from an EN (and HD (2.11) for CENELEC) due to regulations the alteration of which is for
the time being outside the competence of the CEN/CENELEC national member
Note 1 to entry: Where standards fall under EU Directives, it is the view of the Commission of the European
Communities (OJ No C 59, 1982-03-09) that the effect of the decision of the Court of Justice in Case 815/79
Cremonini/Vrankovich (European Court Reports 1980, p. 3583) is that compliance with A-deviations is no longer
mandatory and that the free movement of products complying with such a standard should not be restricted within the EU
except under the safeguard procedure provided for in the relevant Directive.
2.2
B-deviation
national deviation from an HD (2.11) due to particular technical requirements, permitted for a specific
transitional period
2.3
business to business
B2B
provided between organisations and not to the final consumer (2.7)
2.4
business to consumer
B2C
provided by an organisation to the final recipient
2.5
business to government
B2G
provided by an organisation to a government
2.6
consecutive customers
persons and/or entities related by the fact that one of them hires the service and the other is the final recipient
of the service or part of the service
Note 1 to entry: Examples of consecutive customers (2.8) are a company contracting training for its employees; a
parent buying a plane ticket for his/her son; an intermediary contracting a banquet for his/her customer.
5. CEN GUIDE 15:2012 (E)
5
2.7
consumer
individual member of the general public purchasing or using goods, property or services, for personal, family
or household purposes
Note 1 to entry: Adapted from the ISO/IEC Statement on Consumer participation in standardisation work [4].
2.8
customer
organisation or person that receives a service
EXAMPLE Consumer (2.7), client, end-user, retailer, beneficiary and purchaser.
Note 1 to entry: Adapted from EN ISO 9000:2005, 3.5.
2.9
generic management system
management system (2.12) of horizontal application, valid for several sectors of activity
2.10
government to the public
G2P
provided by government to its citizens or to companies, either directly (through the public sector) or by funding
private provision of services
2.11
harmonisation document
HD
CENELEC standard that carries with it the obligation to be implemented at national level, at least by public
announcement of the HD number and title and by withdrawal of any conflicting national standard
2.12
management system
MS
system (set of interrelated or interacting elements) to establish policy and objetives and to achieve those
objectives
[SOURCE: EN ISO 9000:2005]
2.13
service provider
SP
private or public enterprise, structure or organisation which provides services
Note 1 to entry: Adapted from CEN/TS 99001:2009, 2.6.
2.14
service standard
standard that specifies requirements to be fulfilled by a service, to establish its fitness for purpose
[EN 45020:1998]
Note 1 to entry: Service standards can include both specific requirements on the service (measurable) and
organisation procedures in place for repeated or continuous application to ensure that the service level is reached.
Note 2 to entry: A service standard can describe requirements for the service or part of it, and it can establish service
levels or categories
6. CEN GUIDE 15:2012 (E)
6
2.15
special national condition
national characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions,
electrical earthing conditions
Note 1 to entry: If it affects harmonisation, it forms part of the EN (and HD (2.11) for CENELEC).
3 Pre-normative phase
3.1 General
This clause includes a series of items worthy of consideration by those involved with developing standards in
the area of services, in the course of analysing the feasibility of new standardisation proposals, drafting TC
Business Plans or preparing new standardisation proposals. Such an exercise will help to define without
ambiguity the subject under consideration, the environment in which it operates, the purpose of the document
being drafted and many items for inclusion in the document itself. A clear starting point will help avoid taking
steps backwards in the work of the technical body.
3.2 Elements of any service
In order to draft the scope [see 4.1, d)] of the standard it is helpful to answer the following questions:
a) WHAT does the actual service consist of?
This is the core of the service provision and, from the customer’s (2.8) point of view, this is the reason for
contracting the service. It is also the reason for all other predetermined actions.
b) WHO is the service provider (2.13)?
The entity providing the service, the figure committed to comply with the service level of the standard and the
one to offer guarantees of compliance and be held liable in case of non compliance.
c) WHOM is the service addressed to?
The customer, person, group of people or entity receiving the service whose needs and expectations the
service intends to answer.
d) WHERE is the service provided?
The place, physical or virtual, in which service provision takes place.
e) WHEN is the service provided?
The moment or period of time when service provision is carried out.
f) HOW is the service provided?
The way in which the service is provided, the methodology, sequence or process.
3.3 Reasons to undertake standardisation
This subclause refers to the various motivations a service sector can have for drafting a standard or, in other
words, the results aimed for with the publication of the standard. Undertaking standardisation should always
be the response to a specific market demand, either from an industry, from the customers (2.8), from the
administration or other agents.
Should this approach be reflected in the standard itself, the appropriate clause would be the “Introduction”,
since it has an informative nature.
7. CEN GUIDE 15:2012 (E)
7
Potential reasons for a service sector to undertake standardisation activities could be:
To comply with customer requirements or even be ahead of them;
To attend to new demands of customers and market trends;
To differentiate from other offers, by demonstrating good practice / best practice;
To prevent unfair competition;
To increase market credibility;
To provide an opportunity for certification;
To organise activities in a sector lacking specific regulations;
To address the lack of specific qualifications of professionals in a given sector;
To respond to government initiatives or requests;
To support policies and legislation in place;
Other.
3.4 External influences
These are influences present in the environment where service providers (2.13) operate. These influences
have an influence both on the service providers and on their relations with customers (2.8). Primary external
influences should be considered when developing a service standard (2.14) although they are not the object
of the service standard itself and in fact are not susceptible to standardisation. However, some service
requirements or recommendations may derive from their consideration.
a) Society
Society will inevitably exert a certain pressure on the design of services as well as on any other economic
activity. This pressure will vary from country to country depending on how much legislation is enacted, the
social awareness or the maturity of the population. Environmental protection, social responsibility and equal
opportunities between women and men are illustrative examples of modern and evolving society concerns.
b) Legislation and technical specifications
Legislation as well as technical specifications, codes of practice, professional codes and similar will influence
the provider’s decision from conception through to delivery and have a bearing on customer expectation.
An important principle should be born in mind: a standard should never include requirements or statements
that contradict applicable legislation of the same or higher level, e.g. requirements concerning the health and
safety of those providing the service (see also 7.2.3).
For more information on the interface of service standards with legal requirements see Clause 5.
c) Competition
A similar offer to that supplied by the service provider, or even a different one (substitutive services), can
attract customers and prevent them from hiring or using the services supplied by the service provider.
Competition will certainly have an influence on the customer’s decision-making and probably on complaining
behaviour.
8. CEN GUIDE 15:2012 (E)
8
d) Technology
Access to existing technology or the emergence of new technology can have a significant influence on the
quality of service provision and in some instances can be the sole reason for service provision.
Technology can be standardised but, in principle, this is not the purpose of service standards (2.14). Service
standards can refer to the required technology that shall/should be available for a specified level of service
provision. Reference can be made to existing standards describing products, technological languages or
other.
The technology can be required to support service provision without the customer even noticing its existence
(e.g. a swimming pool heater) or it may be needed for direct customer use (e.g. a virtual interface). In both
cases, technology failure can be a reason for great customer dissatisfaction and the reason for a formal
complaint.
Technological requirements in service standards should be expressed in terms of technical specifications
avoiding reference to any specific equipment or commercial brand, for example, as an indication of required
calories per hour. The service provider will choose from the equipment available in the market the one which
bests suits the activity, while meeting the requirements of the standard.. Technology under patent rights
should also be avoided in standards, though there are specific rules in cases where it can be the chosen
solution. [1, Annex F Patent rights].
Two other items that influence the way in which the service provider designs the service and can influence its
provision are reward and perceived customer needs.
3.5 Service lifecycle thinking
This Guide includes in Annex A a service lifecycle (SLC) model which describes in a schematic fashion the
likely phases for any service provision (provider cycle) and service experience (customer cycle). Service
standard (2.14) developers are invited to draft the lifecycle for the specific sector under consideration as a
means of identifying potential contents for the standard (see 4.2).
The model shall be interpreted in a flexible way, taking into account that:
not all services go necessarily through all phases and sub-phases (e.g., public services do not
necessarily require the customer (2.8) agreement);
the beginning and termination of each phase is not previously defined, and can vary from one service to
another (e.g. payment can take place in advance or after service has been completed);
there is certainly no previous obligation or commitment of any kind to establish requirements for all
phases and sub-phases;
service can be provided in the form of a single event (e.g. parcel delivery) or as a continuous provision
(e.g. telephone line), it can be composed of just one single core service (e.g. buying an ice cream) or
several (e.g. accommodation) and can also include levels or options (e.g. business class); this model
does not intend to constrain any of these possibilities.
Not all the elements of the service life cycle are suitable for standardisation. The standard should only include
requirements or recommendations the responsibility for which lies with the agent claiming compliance against
the standard, and not with third parties outside his/her control, even though these might be interested parties.
The standard should nonetheless incorporate, as far as possible, the needs or demands of those other
interested parties so the result is broadly acceptable to the market.
3.6 Type of deliverable
It is very important to choose the correct type of CEN deliverable to be developed depending on the purpose
of the document, but also:
9. CEN GUIDE 15:2012 (E)
9
The level at which the deliverable will be developed: national, European or international;
Whether the deliverable will be developed in parallel with ISO (Vienna Agreement) and if so, which
organisation will lead the work.
Types of CEN deliverables are:
a) European Standard: The EN is the appropriate deliverable where there is a need for national
implementation and withdrawal of conflicting national standards. The rigour in the development of the EN
makes it the ideal deliverable to support European legislative needs, or where the standardisation need is
focused on protecting health and safety or as support to certification.
b) Technical Specification: The TS provides an 'appropriate' consensus/transparency solution to a market
need where there is no immediate need for national implementation and withdrawal of conflicting national
standards. Serves as normative document in areas where the actual state of the art is not yet sufficiently
stable for a European Standard.
c) Technical Report: A TR is an informative document. It may include, for example, data obtained from a
survey or data on the "state-of-the-art" in relation to a particular subject. for information and transfer of
knowledge.
d) CEN Workshop Agreement: A CWA is a technical agreement developed in an open structure. It aims to
bring about consensual agreements based on the deliberations of open Workshops with unrestricted
direct representation of interested parties.
e) Guides: Document giving information about standardisation principles and policies and guidance to
standards writers.
See in reference [5] the main steps in the development of CEN deliverables.
Reference [6] is a friendly introduction to the basics in standardisation work.
4 Potential content of a service standard
4.1 Default clauses of any standard
CEN Rules establish provisions for the structure and drafting of CEN deliverables [1].
Standards typically include the following clauses:
a) Title: It indicates, without ambiguity, the subject matter of the document in such a way as to distinguish it
from that of other documents, without going into unnecessary detail.
b) Foreword: It includes information on the organisation (e.g. ISO, CEN) responsible for the document) a
description of who has prepared the standard and the status of the standard (e.g. a status as a national
standard).
c) Introduction (optional): This is the clause to give specific information or commentary about the technical
content of the document, and about the reasons prompting its preparation.
d) Scope: It defines without ambiguity the subject of the document and the aspects covered, thereby
indicating the limits of applicability of the document or particular parts of it. In defining the scope consider
the following possible points for analysis:
1) Identify the objective service or services or part of the service and schematically draw it as a process
2) Use answers to the questions on elements identified in 3.2.
10. CEN GUIDE 15:2012 (E)
10
3) Define who the stakeholders are.
4) Identify your intended customer (2.8) (see 4.2.2 which covers including possible consecutive
customers (2.6)). Indicate, if any, types or groups of customers to whom the service is not
addressed, to avoid any possible confusion of application and record that in the scope, if relevant.
5) Indicate, if any, services which are excluded from the scope, taking account of potential misuse or
unintended use of the service.
e) Normative references (only if necessary): It gives a list of the referenced documents cited in the standard
in such a way as to make them indispensable for the application of the standard. The list is limited to the
minimum needed. Every normative reference shall be clearly referred to in the text of the standard in a
normative way.
f) Terms and definitions (only if necessary): It gives definitions necessary for the understanding of certain
terms used in the document. For the development of this clause terms and definitions given in law or
other standards should be used as much as possible, instead of developing new unnecessary ones. A
useful link is the ISO Concept Data Base [7].
g) The main clauses of the standard will depend on the type of service being covered but may be expected
to include elements from the life cycle provided in Annex A and developed in 4.2.
h) Annexes (optional): these can be Normative or Informative. Normative annexes give provisions additional
to those in the body of the document. Informative annexes give additional information intended to assist
the understanding or use of the standard.
i) Bibliography (optional): references consulted for the development of the document, to which no normative
reference is made in the text, can be listed here.
4.2 Possible specific contents
4.2.1 Service provider – Who
As the entity undertaking a number of predetermined actions for particular recipients, the service provider
(2.13) (SP) is the ultimately responsible for the service provided. No matter whether other intermediaries have
participated in the process, the service provider is responsible in the case of non compliance with the contract
terms or committed service level.
In the event of the service provision being totally or partially outsourced, the service standard (2.14) can
incorporate statements with regard to the responsibility of compliance with the service requirements and
monitoring of the outsourced organisation.
Think of the real actions and commitments the service provider assumes directly related to good service
provision and avoid overloading the SP with general management issues not relevant to the service.
Consider, however, if any of these might be a specific demand of the customer (2.6) or may help as a
differentiator in the market.
ISO 10001 [8] contains guidance on codes of conduct for organisations. Such codes can decrease the
likelihood of problems arising and can eliminate causes of complaints and disputes which can decrease
customer satisfaction.
4.2.2 Identification of customer – Whom
It is very important that the profile of the customer to whom the standard is addressed is clearly identified by
the technical body and specified in the scope if appropriate.
The customer can be an individual or a group, a person or an organisation with legal entity. There could be
consecutive customers with the provider’s objective being to satisfy all of them. It is necessary to know who
will evaluate the service, who will be asked about his/her degree of satisfaction and who can bring any
11. CEN GUIDE 15:2012 (E)
11
influence to bear on the decision to repurchase. In brief, both the customer (person hiring the service) and the
final recipient of the service should be identified.
It might be necessary to narrow the range of customers to whom the service is addressed. Indicate in the
scope, if any, the types or groups of customers to whom the service is not addressed, to avoid any possible
confusion of application (e.g. only those with certain abilities may be eligible to practice an adventure tourism
speciality; businesses and not final customers; adults and not minors).
Standards are not intended to place requirements on the customers. The service is usually a co-production,
that involves the provider and the customer, but the services specifications of the standard have to be
presented as an initiative of the provider; even the commitments of the customer have to be controlled or
supported by the provider. In the event that a specific contribution by the customer is required at a given
moment for the service to be provided at the committed quality level, the solution when drafting the standard
could be to require the SP to commit him/herself to requesting said collaboration to the customer in a formal
way (e.g. ISO 10667-1 and -2 [9 and 10]). In the event that the SP cannot obtain the customer’s collaboration
as requested, the latter commits him/herself not to continue providing the service if the standard prevents
him/her from doing so or, otherwise, recording the negative response of the customer.
Once the target group of the service standard has been identified:
search for the customer´s needs and expectations;
search for specific and special needs of certain groups (persons with disabilities, children, executives and
so on).
The service provider cannot standardise the needs and expectations of the customer but he/she can
standardise the offer aiming at meeting those based on available information. For additional information
see 7.1.
4.2.3 Marketing and awareness
This covers all aspects of making information available to potential customers with regard to the nature, extent
and availability of any particular service and with a view to influencing the customer’s decision with regard to
service take-up, to meet their own perceived and actual needs. This includes “awareness”, the extent to which
customers become aware and are influenced by service providers’ promotional activity.
It can take place through a direct or indirect relationship with the customer (e.g. the client visits service
provider’s offices for information or consults the web page on his own).
Much of this information might be relevant at the agreement phase (see 4.2.4) and vice versa.
4.2.4 Agreement
The agreement or contract states the conditions for service provision (e.g., scope, duration, place, required
guarantees, payment methods, price, etc). Customers establish their conditions for accepting the service, or
accept the conditions previously established by the service provider, or reach an agreement with the latter.
There might be a negotiation to particularise the agreement but this particularisation is not typically covered by
any standard as standards intend to provide solutions for repeated situations and not for singular cases.
The six elements of any service (see 3.2) do also provide relevant information for the agreement.
“Contractual requirements (concerning claims, guarantees, covering of expenses, etc.) and legal or statutory
requirements shall not be included.” See reference [1], 6.3.3. Those would limit competition.
4.2.5 Billing and payment
Whilst payment is not necessarily required for all service delivery, billing is likely to be an intrinsic part of the
lifecycle of the majority of services. It is essential to recognise that the billing process and the payment
12. CEN GUIDE 15:2012 (E)
12
methods, which are both complementary to the core service, can be the cause of considerable dissatisfaction
on the part of the customer. It should be considered that good service can become unsatisfactory in the mind
of the customer as a result of poor billing practice or inadequate payment facilities.
It is not possible to fix service prices in standards.
ISO/DIS 14452 [11] is an example of a standard covering the subject of billing.
4.2.6 Service provision – What
The time at which the WHAT element [see 3.2, a)] or core service takes place supported by other
predetermined actions is likely to be the period of closest interaction between service provider and customer.
The beginning and termination (milestones) of a service do not take place at a specific moment in time; on the
contrary, they can vary from one service sector to another and even from one provision to the next of the
same service.
The service provider has to be ready to respond to the committed service level and have all the required
resources, side and supporting services in place, ready and running.
During this phase, the service will be viewed in the light of the customer’s needs and expectations for the
service and will be measured against the service requirements stated in the standard and in the agreement
with the client. The service might have to be adapted to a specific client´s needs so some kind of service
design or adaptation of the service might take place.
Consideration should be given to the possible exchange of goods between SP and customer and the
conditions under which such goods will be stored, preserved, tested, destroyed or given back to the owner.
Continuous service e.g. provision of a bank account, may well generate a periodic statement that might trigger
in the customer a conclusion with regard to satisfaction or otherwise, with the service provided, whereas for a
finite event service e.g. a haircut, the conclusion is likely to be drawn at the end of a specific service event.
4.2.7 Complaints, dispute resolution and redress
Ever more mature clients demand an established channel to communicate to the SP the reasons for their
dissatisfaction. In many countries this is no longer an option but a regulated obligation. An effective and
efficient complaints handling process can improve the reputation of an organisation, provide confidence to
clients and provide a valuable input to improving products, services and processes. ISO 10002 [12] contains
guidance on the internal handling of service-related complaints. This guidance can help to preserve customer
satisfaction and loyalty by resolving complaints effectively and efficiently.
Most complaints can be resolved successfully within the organisation but there will be cases in which the
internal complaints handling process does not satisfy the client or in which the latter specifically requests the
complaint to be handled by an external dispute resolution process. ISO 10003 [13] contains guidance on the
resolution of disputes regarding service-related complaints that could not be satisfactorily resolved internally.
This guidance can help to minimise customer dissatisfaction stemming from unresolved complaints.
Customers need to feel confident of service delivery and confident that, should something go wrong, there are
appropriate provisions in place to compensate the failure in providing the service (redress).
When drafting the service standard this clause on complaints and redress should refer to ISO 10001, 2, and 3
(the complaints handling series).
For occupational health and safety issues see 7.2.3.
13. CEN GUIDE 15:2012 (E)
13
4.2.8 Provider review
Though the decision to incorporate relevant changes in the service will always be the prerogative of the
service provider, it is not unlikely to find a requirement for continuous improvement in service standards, not
only referred to management systems (2.12), but to the service performance itself.
The standard should by no means, prevent innovation to take place in between review periods.
4.2.9 Service termination
A decision not to continue service provision could be made by the service provider for one or more of a variety
of reasons and usually as a result of the analysis conducted during the provider review phase; the
organisation can decide not to provide the service again to any customer. In these cases, the guarantees, the
consequences regarding contracts previously established or legal requirements, the potential relocation of
customers, etc, should be borne in mind.
5 Interface with legal requirements
5.1 General considerations
It is important to state that the mere existence of legislation (be it local, territorial, national or regional)
applicable to a service sector does not represent an obstacle to the existence of voluntary standards in that
sector.
Standards are drawn up voluntarily and remain so, unless otherwise decided by the relevant legal authority
(see 5.4). Compliance with law is obligatory irrespective of compliance with standards.
There are a number of interfaces between legislation and voluntary standards for consideration:
a) Inclusion of legal requirements in service standards (2.14) (see 5.2).
b) Inclusion of requirements in standards that enhance compliance with legislation (see 5.3).
c) Reference made to a standard in technical regulations (see 5.4).
Whatever this interface, it could be explained in the introduction of the standard.
5.2 Inclusion of legal requirements in service standards
A standard should never reproduce legal requirements from or make normative reference to applicable
legislation at the same or higher level. Standards can include voluntary requirements on top of legislative
requirements, agreed in the technical body by consensus, in response to a certain market situation.
Standards can make reference to legislative requirements in an informative manner. Some standards include
an informative annex listing legislation in force at the time of standard drafting.
A standard should never include requirements or statements that enter in contradiction with applicable
legislation of the same or higher level. Where there are differences between European standards and national
legislation, these are covered by A-deviations (2.1) (see 5.5).
CEN and CENELEC reference documents [1], 6.3.3, and [14], 2.2, include some statements to be taken into
account:
European standards shall not cover those subjects that clearly belong to the domain of regulation of the
Member States, under the principle of susbsidiarity, unless this is explicitly supported by the national
authority.
14. CEN GUIDE 15:2012 (E)
14
Elements of EC directive(s) cannot be reproduced in the standard as normative elements (CEN members
do not vote on elements of directives). Furthermore, no normative reference to EC directives is permitted.
5.3 Inclusion of requirements in standards that enhance compliance with legislation
There is little experience as yet of using service standards (2.14) in order to provide solutions that enhance
compliance with legislation, but many product standards have been developed under the framework of the
New Approach philosophy [15] and a similar model could apply.
It is important to adopt precautionary measures to ensure that standards written in support of legislation are
kept updated when legal requirements change.
5.4 Reference made to a standard in technical regulations
Standards are initially developed as voluntary compliance documents. Public administrations, responsible for
developing legislation, can refer to existing voluntary standards in legal texts as:
documents that contribute to compliance with specific legislation, maintaining their voluntary nature,
one solution among others that, when complied with, provide a means of compliance with the
corresponding legislation, maintaining the voluntary nature of these documents, or
the only solution that ensures compliance with legislation, making standards mandatory at the territorial
and sectorial level of application of the regulation that refers to the standards (local, territorial, national,
regional, or other).
The decision on which way to make reference to the relevant standard(s), falls under the exclusive
competence of the relevant legal authorities.
For a detailed explanation of the benefits of making reference to standards in legislation, see reference [16].
5.5 A-Deviations
CEN and CENELEC recognise two types of deviations from European standards: A-deviations (2.1) and B-
deviations (2.2).
A-deviations are only based on conflicting national regulations. Only CEN or CENELEC members concerned
by the conflicting national regulation, can ask for an A-deviation. Identification of conflicting national
regulations should be done at the earliest possible stage. For a detailed explanation on the process of A-
deviations consult reference [17].
B-deviations are less common every day and do not apply to the majority of services.
5.6 Special national conditions
Special national conditions (2.15) are not considered as deviations. Therefore, whenever possible, provisions
in ENs (and HDs (2.11) for CENELEC) shall be drafted in such a way that they meet such special conditions
without specifically referring to them.
If this is not possible, provisions relating to special national conditions are included in the standard in
normative annexes. For detailed provisions on drafting special national conditions see reference [1].
6 Interface with management systems
6.1 General
There is a very strong interface between service standards (2.14) and management system (2.12) standards
since more and more emphasis is given by service standards to the internal procedures and processes of the
15. CEN GUIDE 15:2012 (E)
15
company. It is important for service standards writers to be able to differentiate between a new management
system and a service standard and identify which rules apply to their document at the earliest possible stage,
avoiding steps backwards, delays and confusion among stakeholders. This clause aims at providing standard
writers with the basic CEN/CENELEC policy on management systems and how to proceed in each of the
possible scenarios.
Service standards writers are generally free to decide which type of standard to develop, as long as it does
not conflict with the CEN/CENELEC policy. However, as a general rule, applying or adapting existing generic
management system (2.9) standards is preferred to developing new unnecessary (sector specific)
management system standards.
This Clause has been written attending to CEN and CENELEC policy on quality management systems
[1], 6.8. As ISO and IEC have a more developed policy on this subject and all these organisations tend to
align their policies and working procedures with time, this clause’s proposal is to follow ISO/IEC indications in
aspects where CEN/CLC have not yet developed their own, considering this to be a good practice.
6.2 Distinguishing between service standards and Management System Standards (MSS)
Experience with MSS produced by ISO shows that a number of common elements exist [18], 7.3.3, and [20].
These common elements can be arranged under the following main subjects:
Context of the organisation;
Leadership (including management commitment, policy and roles/responsibilities);
Planning;
Support (including resources, competence, awareness, communication and documented information);
Operation;
Performance evaluation (including monitoring, measurement, analysis and evaluation, internal audit and
management review);
Improvement (including nonconformity/corrective action and continual improvement).
A management system (2.12) can cover such aspects such as quality, safety, risk, environment, financial
management, internal organisation of the entity or other.
Services standards (2.14), can include all those other requirements, not related to any management system of
the organisation, relevant to ensure the service provision level agreed. It can be generally said that service
standards are devoted to service requirements, recommendations on the service provision, information about
the service, state of the art, etc.
Requirements relating to services should be written, in the form of objective measurable demands, the
compliance with which allows comparison between different organisations.
In contrast, a management system sets the basics of the system which the organisation applies depending on
its own objectives. The outcomes of applying a management system standard are not necessarily the same
for every organisation and are therefore not readily comparable by a client.
6.3 Policy on management systems
6.3.1 General
The following are the main policy aspects about management systems (2.12) standards independent of the
subject they may cover:
16. CEN GUIDE 15:2012 (E)
16
• Unnecessary new management systems should be avoided. For them to remain useful, authoritative and
respected, it is of key importance that they reflect demonstrated market needs and that they are
mutually compatible to facilitate their joint implementation.
• In the lack of specific CEN/CLC policy, it is consider good practice to follow ISO policy and therefore it is
recommended that proposals for new management system standards (MSS), should undergo the
justification process given in ISO Guide 72 [18].
• No service standard shall make service conformity dependent on a quality management system standard,
i.e. it shall not, for example, make normative reference to EN ISO 9001 [19].
• In line with ISO policy on MSS, an MSS should not include directly related services specifications, test
methods, performance levels (i.e. setting of limits) or other forms of standardisation for services or
products produced by the implementing organisation.
6.3.2 Policy on quality management systems
In addition to the general aspects in 6.3.1, CEN/CENELEC Internal Regulations Part 3 [1], 6.8, establish the
main policy aspects for developing sector specific quality management system requirements, these being
perfectly aligned with the ISO/IEC Directives.
Regarding quality management systems, EN ISO 9001 shall be the reference.
It is possible to develop:
Additional requirements on EN ISO 9001 for a specific sector;
Guidance for the application of EN ISO 9001 to a specific sector.
In following one of the two options above, the rules below shall be respected [1]:
Normative reference to EN ISO 9001 in its entirety or, subject to the “applicability” provisions detailed in
its scope, to its clauses or subclauses;
Normative reference to EN ISO 9000;
Alternatively, subject to the “applicability provisions” detailed in the scope of EN ISO 9001, the clauses or
subclauses may be reproduced verbatim;
If text from EN ISO 9001 is reproduced in the sector document, it shall be distinguished from the other
elements of the sector document.;
It is not possible to take parts from EN ISO 9001. It shall be taken in full (except where not applicable as
explained in the paragraph below).
The "applicability provisions" in EN ISO 9001:2008 state: "All requirements of this International Standard are
generic and intended to be applicable to all organisations, regardless of type, size and product provided.
Where any requirement(s) of this International Standard cannot be applied due to the nature of an
organisation or its product, this can be considered for exclusion. Where exclusions are made, claims of
conformity to this International Standard are not acceptable unless these exclusions are limited to Clause 7,
and such exclusions do not affect the organisation's ability, or responsibility, to provide product that meets
customer and applicable statutory and regulatory requirements." Clause 7 refers to the product realisation.
Like any other new management system, it should undergo a justification process as proposed in
ISO Guide 72.
17. CEN GUIDE 15:2012 (E)
17
6.4 High level structure (HLS)
ISO is developing a High Level Structure (HLS) and identical text for management system (2.12) standards
and common core management system terms and definitions as explained in Draft ISO Guide 83 [20]. This
draft Guide includes a number of terms and definitions as well as an indication of the main clauses that any
new MSS should include and will develop a template on it.
Standard writers are advised to consult the status of Guide 83, as well as the rules for its use, when drafting
their MSS.
6.5 Options for service standards writers
At the time of developing this Guide, attending to European and international policies on management
systems (2.12), one standard cannot include, requirements on the management system and requirements of
the service provision, at the same time.
Service standards (2.14) writers therefore have the following options with regard to management systems .
They may develop:
• Standards including specific requirements for a service with no management system requirements. Only
conformity of the service level established in the standard can be declared or proved by the company
when assessed against the standard.
• Guidance for the application of an existing horizontal management system to a specific sector. For
sectorial application of EN ISO 9001, (see 6.3.2).
• Guidance for the application of an existing horizontal MS to a specific sector, with additional requirements
to the horizontal MS for that specific service sector. CEN also establishes specific provisions when the
reference management system is EN ISO 9001 (see 6.3.2).
• Totally new management system for running an organisation or an aspect of that organisation (safety and
security of consumers (2.7), risk, financial management, information technology management). In this
case, only conformity of the management system operated by the company can be declared or proved
when assessed against the standard.
7 Addressing other horizontal issues
7.1 Criteria used by customers when choosing and assessing a service
The criteria detailed in this clause are those which the customer (2.8) refers to when assessing a service [21].
The original list has been enlarged with “accessibility”.
Standard developers are advised to decide the contents of the standard (see 4.2) with this approach in mind.
Should one or more of these criteria be of relevance at a certain point in the service it might be worth
considering the inclusion of a requirement or recommendation that will help the customer to have a better
concept or perception of the service.
This approach is complementary to considerations followed throughout 4.2 and their combined use can yield
new valuable information.
a) Tangible elements: These include, among other elements, the appearance of facilities, premises where
the service is provided, equipment, staff and printed or visual material.
b) Reliability: Ability to provide the service agreed in a reliable and accurate way.
c) Response capability: Providing the customers with assistance and a timely service.
18. CEN GUIDE 15:2012 (E)
18
d) Professional competence: Having the abilities required and the knowledge so that the service provider’s
(2.13) personnel can provide the service.
e) Courtesy: Education, respect, consideration and friendliness of the personnel recruited by the service
provider.
f) Credibility: Honesty, trust and integrity that the personnel and organisation providing the service can
generate in the customer.
g) Health and safety: Relevant for the customer and his/her belongings, also covers all aspects regarding
protection of honour, of the cultural or religious identity of customers, of their personal details, etc., the
environment where the service is provided, the equipment used, investments, identity, lack of exposure to
danger, risks or doubts.
h) Access: Ability to access a service, an attainable service, or a service which is easily hired.
i) Accessibility: Design of the service and/or built or natural environment where a service is provided, so
that it enables persons with and without disabilities to enjoy it. This concept is actually identical to the
previous one, but it has been differentiated in order to highlight the importance of taking into account
groups with special needs.
j) Communication: Ability to listen to the customers, keep them duly informed and use a simple language.
k) Understanding the customer and customer service: Make an effort to get to know the customers and
their needs.
For specific advice on addressing consumer (2.7) issues in service standards consult ISO Guide 76 [22].
7.2 Human resources
7.2.1 General
As most services are intangible by nature, the provision very much relies on persons that do for the customer
(2.8) something he/she cannot do or does not want to do. This characteristic of services places so much
importance on the qualifications, training and skills of the service provider´s (2.13) personnel. Many service
standards (2.14) do include this type of requirement as a support to good service provision.
7.2.2 Qualification of personnel
Those interested in or involved with developing service standards which cover qualification of professions /
personnel (QPP) should consult CEN Guide 14 [23] which offers possible solutions to the question whether
and how standardisation can provide a contribution to the QPP process.
7.2.3 Occupational health and safety
Requirements concerning the health and safety of workers at work are not to be formulated in service
standards. The service provider must comply with the relevant OH&S provisions.
According to the opinion of representatives of trade unions in standardisation, a service standard (2.14) shall
not substitute collective agreements. This does not necessarily imply that standards cannot be an vehicle for
achieving better working conditions, as this can have a positive influence as well in service provision.
When it comes to the establishment of requirements applicable to human resources it should be taken into
consideration that the requirements for the protection of the health and safety of employees at work is subject
to regulation at the national level and directives pursuant to Article 153 of the EC Treaty apply. These
directives only set minimum requirements and Member States are allowed to set more stringent regulations
when transferring the European directive on occupational health and safety into national law. Occupational
health and safety aspects which should not be included in standards or other deliverables are for example:
19. CEN GUIDE 15:2012 (E)
19
• Equipping of workplaces with secondary safety technology, e.g. emergency exists for employees.
• Definition of workplace limit values.
• Corporate organisation and implementation of OH&S measures, e.g. by means of OH&S management
systems (2.12).
• Training in OH&S issues.
• OH&S medical examination.
• The use of personal protective equipment.
Standards could nonetheless set requirements regarding health and safety aspects of the customer (2.8).
7.3 Environmental aspects
CEN Guide 4
1)
[25] outlines how products (goods and services) can impact upon the environment at all stages
of their life-cycle, e.g. raw material acquisition, production, use and end-of-life treatment, including reuse,
recycling and final disposal and including transportation between all stages. These impacts range from slight
to significant; they can be short-term or long-term; and they occur at global, regional or local level.
The need to reduce the potential adverse impacts on the environment of a product that can occur during all
stages of its life is recognised around the world. The potential environmental impacts of products can be
reduced by taking into account environmental issues in product standards.
CEN Guide 4 proposes a step-by-step approach, based on life-cycle thinking
2 )
and recommends that
standards writers should assess systematically the relevant environmental aspects and connected impacts
based on this principle.
A helpful tool for achieving this task is the environmental checklist. Once completed, the environmental
checklist permits the identification of the product life-cycle stages at which relevant environmental aspects are
found, and where provisions could be included in the product standard.
The environmental checklist provided in CEN Guide 4 has been adapted for services and can be found in
Annex B (Informative). It can be particularised for the focus of the organisation and service.
Guidance and principles to follow when completing the checklist described in 5.3 in the CEN Guide 4 for
“product-only” standards can also be applied to the “Service” environmental checklist.
7.4 Accessibility
The European population can be characterised as getting older as a consequence of the decrease in births
and the increased longevity. This older population constitutes a growing market and many services might
need to incorporate criteria on accessibility for all. CEN/CENELEC Guide 6 [27] provides guidance to writers
on how to take into account the needs of older persons and persons with disabilities.
1) A product is defined in the CEN Guide 4 as “any goods or service” – in reference to EN ISO 14050:2009). Therefore,
whenever the term product is used in this section, it means “goods and service”
2) The life cycle thinking is the consideration of all relevant environmental aspects (of a product) during the entire (product)
life-cycle [26].
20. CEN GUIDE 15:2012 (E)
20
7.5 Social responsibility
Organisations around the world and their stakeholders are becoming increasingly aware of the need for and
benefits of socially responsible behaviour. The objective of social responsibility is to contribute to sustainable
development.
The concept of social responsibility covers the impacts of organisation´s decisions and activities on society
and the environment, through transparent and ethical behaviour.
The standard on this subject where standards writers can find some guidance is ISO 26000 [28].
7.6 Small and medium enterprises
A sizable majority of European enterprises are micro, small and medium sized enterprises. CEN/CENELEC
Guide 17 [29] provides guidance for writing standards taking into account the needs of this important group of
companies.
7.7 Ergonomic issues
As with the development of products and software, ergonomic design criteria should also be taken into
account when designing services. In particular, the inclusion of criteria on usability improves productivity, e.g.
functionality and reliability, safety and health of the user (ISO 9241-100, see reference [30]). Of central
importance for services is – similar to the development of usable software – the so-called context of use. It
includes the relevant knowledge and experience of the user in addition to the objectives and tasks of the
service.
Ergonomics can provide concrete knowledge for the development of standards in the area of services, e.g. in
the ergonomic principles referring to the needs of older persons and people with disabilities [27] [31].
8 Measurement of service quality
One of the key elements of organisational success is the customer´s (2.8) satisfaction with the organisation
and its products and services. Therefore, it seems necessary to monitor and measure both service provision
and customer satisfaction.
This clause provides guidance on approaching customer satisfaction at several points of the service provider
(2.13)-customer relationship.
Figure 1 represents the gaps between service provider and customer with respect to service quality (provided
and perceived) and addresses specifically the issue of customer satisfaction. Some of the issues addressed
here have been analysed in other clauses.
21. CEN GUIDE 15:2012 (E)
21
Figure 1
1 EXPECTED SERVICE
The expected service is that the customer considers right to receive. The customer builds up this conception
based upon identification of his/her own needs, publicity, mouth-to-mouth or other. The expected service can
be explicit or implicit for the customer and sometimes not even articulated.
2 PLANNED SERVICE
The service provider intending to meet customer needs and expectations should try to identify those by
indirect or direct methods, as for example consulting sector-related statistics, general surveys and customer
trend studies or conducting direct interviews to customers. Information collected from customer complaints will
also be valuable for the purpose.
3 SERVICE PROVIDED
Measuring the service provided against the committed service specification (standard, agreement with client,
sector-related or internal specification) helps to monitor service quality and keep control over the
organisation’s performance. The measurement process should be planned, validated, implemented,
documented and monitored. The number of items to be measured, the measuring method, frequency of
measures as well as the compliance/non-compliance criteria should all be clearly defined. Certification (third
party) and mystery shopper (first or second party) are well known methods of measuring compliance.
ISO 10001 [8] contains guidance on codes of conduct for organisations related to customer satisfaction. Such
codes can decrease the likelihood of problems arising and can eliminate causes of complaints and disputes
which can decrease customer satisfaction.
4 PERCEIVED SERVICE – 5 CUSTOMER SATISFACTION
The service quality the customer perceives governs his/her degree of satisfaction. Knowing the client´s
opinion on the received service is a significant source of information for any organisation. ISO/TS 10004 [32]
provides guidance in defining and implementing processes to monitor and measure customer satisfaction.
6 COMPLAINTS HANDLING and 7 EXTERNAL RESOLUTIONS DISPUTE
22. CEN GUIDE 15:2012 (E)
22
See 4.2.7 and [12] and [13].
8 CONTINUOUS IMPROVEMENT
The information obtained by measuring customer (2.8) satisfaction can be valuable for the service provider
review and continuous improvement (see 4.2.8).
23. CEN GUIDE 15:2012 (E)
23
Annex A
(informative)
The service lifecycle model
Figure A.1 Service lifecycle model
24. CEN GUIDE 15:2012 (E)
24
Annex B
(informative)
Service Environmental checklist
25. CEN GUIDE 15:2012 (E)
25
Bibliography
[1] CEN-CENELEC Internal Regulations Part 3: Rules for the structure and drafting of CEN-CENELEC
Publications. (ISO/IEC Directives, Part 2. Modified)
[2] Directive 2006/123/ of the European Parliament and of the Council of 12 December of 2006 on services
in the internal market.
[3] ISO/IEC Guide 76 Development of service standards. Recommendations for addressing consumer
issues. 2008.
[4] ISO/IEC Statement on Consumer participation in standardization work, ISO/IEC 2001.
[5] CEN Deliverables: http://www.cen.eu/boss/supporting/Guidance%20documents/GD059%20-
%20CEN%20deliverables/Pages/GD%20-%20CEN%20deliverables.aspx
[6] Hands on standardization. A starters guide to standardization for experts in CEN technical bodies
[7] ISO Concept Data Base https://cdb.iso.org/cdb/search.action
[8] ISO 10001 Quality management. Customer satisfaction. Guidelines for codes of conduct for
organizations.
[9] ISO 10667-1 Assessment service delivery. Procedures and methods to assess people in work and
organizational settings. Part 1: Requirements for service providers.
[10] ISO 10667-2 Assessment service delivery. Procedures and methods to assess people in work and
organizational settings. Part 2: Requirements for the client.
[11] ISO/DIS 14452 Network services billing.
[12] ISO 10002 Quality management. Customer satisfaction. Guidelines for complaints handling in
organizations.
[13] ISO 10003 Quality management. Customer satisfaction. Guidelines for dispute resolution external to
organizations.
[14] CEN Guidance document “Standards and regulation”.
(http://www.cen.eu/boss/supporting/Guidance%20documents/GD026%20-
%20Standards%20and%20Regulations/Pages/default.aspx)
[15] CEN Guidance document “The New Approach”.
(http://www.cen.eu/boss/supporting/Guidance%20documents/GD009%20-
%20Guidance%20on%20the%20New%20Approach/Pages/default.aspx)
[16] Using and referencing ISO and IEC standards for technical regulations. September 2007. ISO. IEC.
(http://www.iso.org/iso/standards_for_technical_regulations.pdf)
[17] CEN Guidance Document – National regulations – Possible conflict with CEN work.
(http://www.cen.eu/boss/supporting/Guidance%20documents/Adev/Pages/default.aspx)
[18] ISO Guide 72 Guidelines for the justification and development of management system standards
[19] EN ISO 9001 Quality management systems. Requirements.
26. CEN GUIDE 15:2012 (E)
26
[20] ISO Guide 83 (Draft) High level structure and identical text for management system standards and
common core management system terms and definitions.
[21] Delivering quality service: balancing customer perceptions and expectations . Valarie A. Zeithaml, A.
Parasuraman and Leonard L. Berry. Simon and Schuster, 1990
[22] ISO Guide 76 Development of service standards. Recommendations for addressing consumer issues.
[23] CEN Guide 14 Common policy guidance for addressing standardization on qualification of professions
and personnel.
(ftp://ftp.cen.eu/BOSS/Reference_Documents/Guides/CEN/CEN_14.pdf)
[24] European Commission. The EU Single Marquet. Professional qualifications.
(http://ec.europa.eu/internal_market/qualifications/index_en.htm, if this information could be useful for
developing the service standard.)
[25] CEN Guide 4 Guide for addressing environmental issues in product standards
http://www.cen.eu/boss/supporting/Reference%20documents/guides/Pages/default.aspx
[26] IEC Guide 109 Environmental aspects. Inclusion in electrotechnical product standards
[27] CEN/CENELEC Guide 6 Guidelines for standards developers to address the needs of older persons
and persons with disabilities.
ftp://ftp.cen.eu/BOSS/Reference_Documents/Guides/CEN_CLC/CEN_CLC_6.pdf
[28] ISO 26000 Guidance on social responsability.
[29] CEN/CENELEC Guide 17 Guidance for writing standards taking into account micro, small and medium
size enterprises (SMEs) needs.
[30] ISO 9241-100 Ergonomics of human-system interaction -- Part 100: Introduction to standards related to
software ergonomics
[31] ISO 10075-3 Ergonomic principles related to mental workload -- Part 3: Principles and requirements
concerning methods for measuring and assessing mental workload
[32] ISO/TS 10004 Quality management. Customer satisfaction. Guidelines for monitoring and measuring.